update

[web/gag.com] / rockets / airframes / YikStik3 / index.mdwn

diff --git a/rockets/airframes/YikStik3/index.mdwn b/rockets/airframes/YikStik3/index.mdwn
index cada025fb515d6ce4f1d64562756ece78ebbe084..4d696e487a26dba4cd1381e3833e2ddb3a7d6cc8 100644 (file)
--- a/rockets/airframes/YikStik3/index.mdwn
+++ b/rockets/airframes/YikStik3/index.mdwn
@@ -26,7 +26,8 @@ embedded in the glass layers made for us by Jeff Lane of
 
 ## Design Details
 
 
 ## Design Details
 

-* 98mm [Performance Rocketry](http://performancerocketry.com) G-10 convolute glass air frame
+* 98mm [Performance Rocketry](http://performancerocketry.com) G-10 convolute glass air frame 
+* 98mm [Performance Rocketry](http://performancerocketry.com) G-12 filament-wound glass couplers 

 * 75mm [PML](http://www.publicmissiles.com) phenolic motor mount
 * [Shock Wave Rocketry](http://shockwaverocketry.com/) fiberglass 98mm Von Karman 6:1 nose cone
 * custom fins, using 3/16 inch birch plywood laminated with carbon fiber 
 * 75mm [PML](http://www.publicmissiles.com) phenolic motor mount
 * [Shock Wave Rocketry](http://shockwaverocketry.com/) fiberglass 98mm Von Karman 6:1 nose cone
 * custom fins, using 3/16 inch birch plywood laminated with carbon fiber 


@@ -63,7 +64,8 @@ LiPo battery, and a power switch.
 The TeleScience board supports connection of up to 12 NTC thermistors along
 with other capabilities.  
 
 The TeleScience board supports connection of up to 12 NTC thermistors along
 with other capabilities.  
 

-Installing the electronics in the fin can bay was .. interesting.  More later.
+Installing the electronics in the fin can bay is a *huge* challenge due to the
+restricted space between the MMT and airframe.

 
 ## Build
 
 
 ## Build
 


@@ -74,9 +76,10 @@ The nose cone was custom fabricated by Jeff Lane at
 [Shockwave Rocketry](http://shockwaverocketry.com), with thermistors embedded.
 
 The fins are 3/16 inch birch ply, tapered on the leading and trailing edges,
 [Shockwave Rocketry](http://shockwaverocketry.com), with thermistors embedded.
 
 The fins are 3/16 inch birch ply, tapered on the leading and trailing edges,

-then covered with one layer of 5.7 oz 2x2 twill carbon fiber and a layer of
+then covered with two layers of 5.7 oz 2x2 twill carbon fiber and a layer of

 6 oz glass as a sanding veil, all vacuum bagged with West Systems laminating
 6 oz glass as a sanding veil, all vacuum bagged with West Systems laminating

-epoxy using a kitchen food saver appliance.
+epoxy using a kitchen food saver appliance.  The two CF layers are rotated
+45 degrees from each other.

 
 We're moving from the Giant Leap Rocketry 98mm Magnaframe-based Dynawind to
 G-10 glass tubing this time around.  Dynawind is lighter and strong enough,
 
 We're moving from the Giant Leap Rocketry 98mm Magnaframe-based Dynawind to
 G-10 glass tubing this time around.  Dynawind is lighter and strong enough,


@@ -91,8 +94,7 @@ recovered from 2YikStik's wreckage.
 
 All rings and bulkheads were cut using a CNC milling machine from 3/8 inch
 birch plywood.  The fin forward and leading edge rings are made from 3/4 inch
 
 All rings and bulkheads were cut using a CNC milling machine from 3/8 inch
 birch plywood.  The fin forward and leading edge rings are made from 3/4 inch

-thick assemblies made by laminating two such rings with wood glue, to provide
-sufficient depth for milled fin slots.
+thick birch plywood, mostly to provide sufficient depth for milled fin slots.

 
 Will add a pointer to build photos here once they are available.
 
 
 Will add a pointer to build photos here once they are available.