-Construction has not started yet.
-
-Measurements of parts provided with the kit for building a simulation:
-
-* Pro54 tail cone rear closure
- * 58 grams
- * 36mm long, 11mm straight then tapering
- * 57mm forward OD, 48mm aft OD
-* Pro54 6xl case
- * 469 grams
- * 645mm long, 636mm forward of aft closure
-* 54mm convolute fin can, with fin slots cut
- * 416 grams
- * 808mm long
- * 183mm fin slots starting 17mm from trailing edge
-* 54mm convolute forward air frame
- * 169 grams
- * 312mm long
-* 54mm convolute coupler
- * 68 grams
- * 130mm long
-* 54mm VK nose cone
- * 132 grams (before smoothing)
- * 288mm long, 67mm shoulder
-* 3 fin set
- * 91 grams
- * 184mm root chord, 71.5mm span
- * clipped delta, aft 27mm is straight
- * leading and trailing edges tapered
-* nose bulk plate
- * 9 grams
- * 2.5mm long, 51mm diameter, 6mm hole
-* 2 machined duplex bulkheads
- * 13.5 grams each
- * 3.5mm long, 54mm OD, 5mm hole
-* 2 machined aluminum shock cord anchors
- * 7 grams each
- * 26mm long, 13mm diameter
-* kevlar shock cord
- * 61 grams
-