break large paragraph in two

diff --git a/EasyMotor/index.mdwn b/EasyMotor/index.mdwn
index 87c8f6228f2ba60a82020dfa283493913f544519..281de314518131e1f6aac0ef318544ae75e2cec6 100644 (file)
--- a/EasyMotor/index.mdwn
+++ b/EasyMotor/index.mdwn
@@ -26,7 +26,9 @@ test flights of EasyMotor.  The sensor bodies are 316 stainless with a 1/8 NPT
 male boss, so the approach chosen is to drill a 1/8 inch touch hole all the
 way through the closure, then drill and tap 1/8 NPT female threads part way
 through the closure thickness.  The hole gets filled with grease and the 
-sensor screwed in.  The first example is a 98mm snap-ring clossure, with the 
+sensor screwed in.  
+
+The first example is a 98mm snap-ring clossure, with the 
 sensor and electronics mounted off-center so a 3/8" all-thread could be used
 in the center for motor retention in a minimum-diameter-ish airframe.  The
 mounting bracket for the electronics was bent from a bit of 1/16" aluminum