Update MicroPeak page to match current feature set

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/MicroPeak/index.mdwn b/MicroPeak/index.mdwn
index 647f21e220591dcd0d4ac223d1ea6da1981d2316..b6fecd362ecfae6cfd4ea3aa75cd02de19ebaa00 100644 (file)
--- a/MicroPeak/index.mdwn
+++ b/MicroPeak/index.mdwn
@@ -9,9 +9,9 @@ rocketry altitude measurements.
 <a href="v0.1/micropeak-dime.jpg"><img
 src="v0.1/micropeak-dime-640.jpg"></a>
 
-Production units will be available from the
-[Garbee and Garbee](http://auric.gag.com) web
-store.
+Production units are available from the
+[Garbee and Garbee](http://auric.gag.com/index.php?route=product/product&product_id=80) 
+web store 
 
 ## Documentation ##
 
@@ -22,7 +22,7 @@ The MicroPeak manual is available in
 ## Hardware Features ##
 
  * Measure ground pressure and peak altitude pressure.
- * Blue LED blinks out maximum height in decimeters.
+ * Orange LED blinks out maximum height in decimeters.
  * 18mm x 14mm. 1.9g including battery.
  * Power switch.
 
@@ -59,14 +59,14 @@ Here's a close-up view of the hardware
                * High precision — 2.4Pa resolution (approximately 20cm at sea level)
                * Factory calibrated.
        * CR1025 Lithium Battery
-               * 30mAh. Runs MicroPeak for 10 hours on the pad or in flight
+               * 30mAh. Runs MicroPeak for more than 40 hours on the pad or in flight
        * Standard 6-pin AVR programming interface.
 
  * Software Features
        * Written in C
        * Samples pressure every 96ms
        * Delay 30s after power-on to finish airframe prep
-       * Detect boost with 10m altitude change
+       * Detect boost with 20m altitude change
        * Exponential averaging filter to minimize transient effects.
 
  * Tools Used