slight improvement in wording

diff --git a/FAQs/computerconnection.mdwn b/FAQs/computerconnection.mdwn
index 14a49c5b77bab3653d94a322bb172fea3a50452a..7ca079e26e99d39e33fe32a4752a02fec9633eb5 100644 (file)
--- a/FAQs/computerconnection.mdwn
+++ b/FAQs/computerconnection.mdwn
@@ -23,8 +23,8 @@ battery voltage and then two "dits" (Morse code I) indicating that it's
 entering idle/interactive mode, followed by the pyro continuity beeps
 one time only.  At that point, you should be able to configure it from our 
 software, etc.  If, instead, you hear 'di dah dah dit' (Morse code P) and 
-the continuity beeps repeat every few seconds, you won't be able to talk to
-the board.
+the continuity beeps repeat every few seconds, the board is in pad mode and
+you won't be able to talk to it.
 
 By FAR the biggest problem we see are folks trying to use micro USB
 cables that don't have all the pins connected.  Apparently, lots of