fix typo

diff --git a/EasyMotor/index.mdwn b/EasyMotor/index.mdwn
index 0a6746b6233b318e53e6409ba4349562f3b89b29..170d231bbc9ce01d93f859f84be1b6c998fa4692 100644 (file)
--- a/EasyMotor/index.mdwn
+++ b/EasyMotor/index.mdwn
@@ -28,7 +28,7 @@ way through the closure, then drill and tap 1/8 NPT female threads part way
 through the closure thickness.  The hole gets filled with grease and the 
 sensor screwed in.  
 
 through the closure thickness.  The hole gets filled with grease and the 
 sensor screwed in.  
 

-The first example is a 98mm snap-ring clossure, with the 
+The first example is a 98mm snap-ring closure, with the 

 sensor and electronics mounted off-center so a 3/8" all-thread could be used
 in the center for motor retention in a minimum-diameter-ish airframe.  The
 mounting bracket for the electronics was bent from a bit of 1/16" aluminum 
 sensor and electronics mounted off-center so a 3/8" all-thread could be used
 in the center for motor retention in a minimum-diameter-ish airframe.  The
 mounting bracket for the electronics was bent from a bit of 1/16" aluminum