| 2012-04-19 |
Bdale Garbee | lose the USB pull-up, there's one internal to the SOC
|
commit | commitdiff | tree |
| 2012-04-19 |
Bdale Garbee | rename STM32L151 symbol to prepare for also using 48...
|
commit | commitdiff | tree |
| 2012-03-31 |
Bdale Garbee | data sheets associated with Olimex JTAG interface used...
|
commit | commitdiff | tree |
| 2012-03-31 |
Bdale Garbee | a couple attribute cleanups, label file for printing...
|
commit | commitdiff | tree |
| 2012-03-10 |
Bdale Garbee | more data sheets
|
commit | commitdiff | tree |
| 2012-03-10 |
Bdale Garbee | move cap around the corner to get more standoff clearance
|
commit | commitdiff | tree |
| 2012-03-10 |
Bdale Garbee | make it easier to attach sensing wires with another via
|
commit | commitdiff | tree |
| 2012-03-10 |
Bdale Garbee | add a current measuring resistor in the LDO output net
|
commit | commitdiff | tree |
| 2012-03-06 |
Bdale Garbee | improve copper around GPS antenna center pin
|
commit | commitdiff | tree |
| 2012-03-06 |
Bdale Garbee | make ground thermals on screw terminals and battery...
|
commit | commitdiff | tree |
| 2012-03-06 |
Bdale Garbee | forward-annotate R13 value change to pcb file
|
commit | commitdiff | tree |
| 2012-03-06 |
Bdale Garbee | fix R13 value in schematic
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | add polarity indicators on lipo connector in silk
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | set nopaste on SMA pads, some copper shoving
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | fix product name in the .pcb file, and hide all reference...
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | fixes motivated by freedfm run
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | improve silk legibility
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | drop to 16 pin longer connector
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | add interrupt line from radio to cpu
|
commit | commitdiff | tree |
| 2012-02-29 |
Bdale Garbee | massive attribute update, particularly vendor part...
|
commit | commitdiff | tree |
| 2012-02-29 |
Bdale Garbee | improve spacing on schematic
|
commit | commitdiff | tree |
| 2012-02-29 |
Bdale Garbee | add .gitignore
|
commit | commitdiff | tree |
| 2012-02-29 |
Bdale Garbee | bring work area down to match board outline, add outline...
|
commit | commitdiff | tree |
| 2012-02-29 |
Bdale Garbee | moved baro sensor to ease routing with split SPI wiring,
|
commit | commitdiff | tree |
| 2012-02-29 |
Bdale Garbee | schematic updated with CC1120 power pins connected...
|
commit | commitdiff | tree |
| 2012-02-29 |
Bdale Garbee | gyro symbol and all related nets cleaned up per inputs...
|
commit | commitdiff | tree |
| 2012-02-27 |
Bdale Garbee | fixes incorporated from Keith's STM32L151 pin by pin...
|
commit | commitdiff | tree |
| 2012-02-27 |
Bdale Garbee | more data sheets
|
commit | commitdiff | tree |
| 2012-02-27 |
Bdale Garbee | keithp's review showed VLCD belongs on VDDA, not VDD
|
commit | commitdiff | tree |
| 2012-02-27 |
Bdale Garbee | keithp needs these
|
commit | commitdiff | tree |
| 2012-02-23 |
Bdale Garbee | a few minor tweaks, most of the silk done now
|
commit | commitdiff | tree |
| 2012-02-20 |
Bdale Garbee | route complete, drc clean
|
commit | commitdiff | tree |
| 2012-02-17 |
Bdale Garbee | lose C281 in the UHF section .. our layout constraints...
|
commit | commitdiff | tree |
| 2012-02-17 |
Bdale Garbee | don't try to ground the pad underneath high-g accel...
|
commit | commitdiff | tree |
| 2012-02-17 |
Bdale Garbee | shorted!
|
commit | commitdiff | tree |
| 2012-02-17 |
Bdale Garbee | added top layer ground plane polygons around SMA connector
|
commit | commitdiff | tree |
| 2012-02-17 |
Bdale Garbee | notch moved, analog inputs to ARM for battery voltages...
|
commit | commitdiff | tree |
| 2012-02-16 |
Bdale Garbee | snapshot before moving board edge notch for microUSB
|
commit | commitdiff | tree |
| 2012-02-16 |
Bdale Garbee | snapshot before shortening board again
|
commit | commitdiff | tree |
| 2012-02-14 |
Bdale Garbee | pcb notch for micro USB added
|
commit | commitdiff | tree |
| 2012-02-14 |
Bdale Garbee | snapshot before adding microUSB cutout to pcb edge
|
commit | commitdiff | tree |
| 2012-02-14 |
Bdale Garbee | more schematic work on flight from DEN to SFO
|
commit | commitdiff | tree |
| 2012-02-09 |
Bdale Garbee | make through hole side a solid ground plane (on behalf...
|
commit | commitdiff | tree |
| 2012-02-09 |
Bdale Garbee | snapshot after return from Brussels
|
commit | commitdiff | tree |
| 2012-02-06 |
Bdale Garbee | more work on plane
|
commit | commitdiff | tree |
| 2012-02-06 |
Bdale Garbee | working on the flight from BRU to IAD after FOSDEM
|
commit | commitdiff | tree |
| 2011-12-01 |
Bdale Garbee | switch to dual LEDs for both battery charger and main...
|
commit | commitdiff | tree |
| 2011-12-01 |
Bdale Garbee | filling in more of the schematic
|
commit | commitdiff | tree |
| 2011-11-30 |
Bdale Garbee | notes about gps antenna choices, more futzing
|
commit | commitdiff | tree |
| 2011-11-25 |
Bdale Garbee | added a lot of the passives around the RF section
|
commit | commitdiff | tree |
| 2011-11-25 |
Bdale Garbee | capture initial work on MegaMetrum
|
commit | commitdiff | tree |
|
projects / hw / telemega / search