move refdes around to make loading parts possible
[hw/telefireone] / telefiretwo.pcb
2016-04-07 Keith Packardmove refdes around to make loading parts possible
2016-02-10 Bdale GarbeeMerge branch 'master' of ssh:// fab-v1.0
2016-02-10 Bdale Garbeeprepare to send to seeed
2016-02-06 Bdale Garbeevoltage divider on pressure sensor output, ore bypass...
2016-02-05 Bdale Garbeeeliminate refdes from silk
2016-02-02 Keith PackardAdjust size back. Add outline bits to slots
2016-02-02 Bdale Garbeeall silked up...
2016-01-30 Bdale Garbeeroute complete, silk still needs connector labels
2016-01-21 Bdale Garbeeadded USB pin header, removed most of the copper, worki...
2016-01-18 Bdale Garbeemore part shoving
2016-01-18 Keith PackardSuggest different connector layout
2016-01-18 Bdale Garbeeall parts placed
2016-01-17 Bdale Garbeeadd load cell and thermistor sensor circuits
2016-01-17 Bdale Garbeemove LDO input cap to a 220uF through-hole part
2016-01-17 Keith PackardSwitch to full-size LEDs
2015-12-24 Keith PackardSwitch to TO252FET footprint
2015-12-23 Keith PackardSwitch FET footprints to TO252
2015-12-21 Keith PackardAdd beeper
2015-12-18 Keith PackardHook up PB6 to force boot loader entry.
2015-12-17 Keith PackardAdd pyro voltage sense, as in TeleFire
2015-12-16 Keith PackardSwitch to 22uF cap. Rewire SPI.
2015-12-16 Keith PackardMake refdes useful for loading boards.
2015-11-21 Keith PackardRoute complete and off to seeed v0.1
2015-11-21 Keith PackardRename nets to match pad numbers
2015-11-16 Keith PackardSwitch to CC1200 radio part
2015-10-28 Keith PackardForward annotate a few part attribute changes from...
2015-10-28 Keith PackardMove refdes around on the pcb
2015-10-28 Keith PackardClean up traces a bit
2015-10-27 Keith PackardRoute on two layers
2015-10-27 Keith PackardCut rectangles for USB connector slots
2015-10-27 Keith PackardAdd USB power jumper for bringup. Fix floods.
2015-10-25 Keith PackardInitial import