3 This is a request for quote on raw boards and partial turnkey assembly
4 of two new products, TeleLCO 1.0 and TeleFire 1.0. We're planning on
5 running these through 'kickstarter', so we'll set a minimum build
6 quantity, but the order could end up larger than that. We'd like to
7 get quotes for 10, 25, 50 for TeleLCO and 20, 50, 100 TeleFire to help
8 set the pricing in the campaign
10 Kim, like some of our other products, this one has a notch in one side
11 to allow a micro USB connector to overhang the board edge. As a
12 result, these need to be tab-routed. We have no discussed optimal
13 panelization for a board of this geometry before, so please let me
14 know what a good arrangement would be if we want to build these in
15 lots of 10 ish. My latest FreeDFM run resulted in quotes 3956156 for
16 TeleLCO and 3956159 for TeleFire. We'll want to run these in standard
17 spec with the cheapest option which I think is 5 days.
19 Laura, the new BOM is attached, and the XYRS data is in the
20 telefire.xy and telelco.xy files in the zips. As usual we will
21 provide some hard to find parts and want you to turnkey the rest.
22 We're quite cost sensitive for these, so whatever the cheapest
23 assembly turn should be fine.
25 From the standard data request for assembly quotes:
27 Company Name: Altus Metrum, LLC
29 Contact Name: Keith Packard
33 Part Number: TeleFire and TeleLCO
37 How many to assemble: 10, 25 or 50 TeleLCO
38 20, 50 or 100 TeleFire
40 PCB dimensions: TeleLCO is 4.50 x 3.75
41 TeleFire is 4.00 x 4.00.
43 How parts acquired: partial turnkey
45 We will provide J3 for TeleFire and
49 all SMT is on one side, and
50 all TH parts are no-loads
60 Please let me know if I've forgotten anything, and thanks in advance for