| 2011-04-21 |
Bdale Garbee | fix targets so make zip works
|
commit | commitdiff | tree |
| 2011-04-21 |
Bdale Garbee | connect a spare cc1111 pin to the open pin on the companion...
|
commit | commitdiff | tree |
| 2011-04-21 |
Bdale Garbee | add TP2 attached to v_usb so we can experiment with...
|
commit | commitdiff | tree |
| 2011-04-21 |
Bdale Garbee | cts and rts need to be cross-connected between the...
|
commit | commitdiff | tree |
| 2011-04-19 |
Bdale Garbee | mark the serial pullups as noload, keithp says they...
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | move bt_link to correct pin as per keithp feedback
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | improvements in ground plane continuity, better spacing...
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | fix beeper interference with sma
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | resolve switch / sma interference issue by moving switch...
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | route complete, drc clean, added the usual silkscreen...
|
commit | commitdiff | tree |
| 2011-04-16 |
Bdale Garbee | pull ground plane back away from BT antenna, work more...
|
commit | commitdiff | tree |
| 2011-04-14 |
Bdale Garbee | adjust placement to account for pcb dimension reduction
|
commit | commitdiff | tree |
| 2011-04-14 |
Bdale Garbee | shave 50 mils off SMA end of PCB to allow for SMA flange...
|
commit | commitdiff | tree |
| 2011-04-12 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2011-04-12 |
Bdale Garbee | working on placement
|
commit | commitdiff | tree |
| 2011-04-12 |
Bdale Garbee | connect both VDD pins on BT module, add a second bypass...
|
commit | commitdiff | tree |
| 2011-04-12 |
Bdale Garbee | add beeper
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | pcb syncronized with schematic, all parts on board...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | move the "ground plane" to the "top" of the board since...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | fix hole size in schematic to match 1551K mounting...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | lock the outline, the bottom poly and boundary vestigal...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | expand bottom poly to full board size, then clone outline...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | holes moved to the right places for maximum size 1551K...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | outline now matches Hammond max PCB size for 1551K box
|
commit | commitdiff | tree |
| 2011-04-09 |
Bdale Garbee | Outline and hole positions right for board that is...
|
commit | commitdiff | tree |
| 2011-04-08 |
Bdale Garbee | update to use freshly generated Rayson module footprint
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | keithp found this doc
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | loss the vdd_usb connection on the BT chip
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | hook up vdd_usb on the bt chip, add a bypass cap
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | add bt_link net to monitor link status, fix LED colors...
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | hook up pin on BT widget that would allow us to reset...
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | replace BTM182 datasheet with fresher copy from the...
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | symbols needed for schematic
|
commit | commitdiff | tree |
| 2011-04-03 |
Bdale Garbee | first cut at schematic more or less complete
|
commit | commitdiff | tree |
| 2011-03-31 |
Bdale Garbee | a few more component changes, initial (worthless) pcb...
|
commit | commitdiff | tree |
| 2011-03-31 |
Bdale Garbee | move to micro USB, add my favorite push button power...
|
commit | commitdiff | tree |
| 2011-03-31 |
Bdale Garbee | add datasheets to git repo, even though most of them...
|
commit | commitdiff | tree |
| 2011-03-30 |
Bdale Garbee | initial cut at stripping schematic down .. forget pcb...
|
commit | commitdiff | tree |
| 2011-01-26 |
Bdale Garbee | initialize project with a copy of telemetrum v1.1
|
commit | commitdiff | tree |
|
projects / hw / telebt / search