Respond to seeed DFM report
[hw/chaoskey] / chaoskey.pcb
2016-05-19 Keith PackardRespond to seeed DFM report
2016-04-04 Keith PackardReplace SoC footprint (again). Make all vias the same... v0.5
2016-03-09 Keith PackardSwitch LED current-limit resistor to 220Ω
2016-03-07 Keith PackardSwap STM footprint for fewer edges. Fix mask on LDO...
2016-02-21 Keith PackardSwitch 1uF cap to 35V part
2016-02-08 Keith PackardAdd red LED v0.4
2016-02-08 Keith PackardUse smaller traces for signal runs
2016-02-08 Keith PackardG6 part has pin 18 as VDDIO2, not GPIO
2016-01-20 Keith PackardResize J6 name on PCB
2016-01-19 Keith PackardAdd outline bits to USB connector slots
2016-01-19 Keith PackardAdd force-flash pin. Move components to preferred-parts.
2016-01-19 Keith PackardSwitch to 28-pin QFN process. Rework for tiny box.
2016-01-18 Keith PackardFix attributes to build complete parts list
2016-01-18 Keith PackardFix fill on bottom to follow the outline
2016-01-18 Keith PackardReplace USB footprint with updated version including...
2016-01-17 Keith PackardUse 27k resistors on the input to create a false ground
2015-12-29 Keith PackardUse op-amp instead of transistor
2015-03-20 Keith PackardConnect high voltage shutdown pin to CPU
2015-03-16 Keith PackardRename to 'ChaosKey'