Flip the servo footprint

I drew this from the bottom, so it was mirrored.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/packages/servo.5c b/packages/servo.5c
index 15720c8c08e1bbec1b864f2f63a9f2853f3ff594..a58daad9c91e9935bd1a114d5cf54faa38a07e57 100644 (file)
--- a/packages/servo.5c
+++ b/packages/servo.5c
@@ -31,7 +31,9 @@ real  origin_x = 423;
 real   origin_y = 213;
 
 real xmm(real xpix) = pixtomm(xpix - origin_x);
-real ymm(real ypix) = pixtomm(ypix - origin_y);
+
+/* Image was of the bottom, mirror the result */
+real ymm(real ypix) = pixtomm(1999 - (ypix - origin_y));
 
 pos_t pos(real xpix, real ypix) = (pos_t) { .x = xmm(xpix), .y = ymm(ypix) };
 
@@ -44,14 +46,19 @@ pos_t mrr = pos(3980, 1036);
 pos_t ll = pos(423, 1955);
 pos_t lr = pos(3980, 1955);
 
-pos_t mount_ul = pos(781, 208);
-pos_t mount_ur = pos(2102, 208);
+pos_t mount_ul = pos(761, 208);
+pos_t mount_ur = pos(2082, 208);
 
 pos_t mount_ll = pos(652, 1999);
-pos_t mount_lr = pos(3561, 1999);
+pos_t mount_lr = pos(3500, 1999);
 
 real mounting_hole = pixtomm(142);
 
+pos_t pin_l = pos(423 + 257, 1955 - 826);
+pos_t pin_r = pos(423 + 1788, 1955 - 826);
+
+real index_pin = pixtomm(100);
+
 void linepos(pos_t a, pos_t b) { line(a.x, a.y, b.x, b.y); }
 
 void outline() {
@@ -69,6 +76,10 @@ void drill(pos_t a) {
        pin_mm_clear(a.x, a.y, mounting_hole, 0.22, 0.32, "mount", "mount");
 }
 
+void pin(pos_t a) {
+       pin_mm_clear_options(a.x, a.y, index_pin, 0, 0, "pin", "pin", "hole");
+}
+
 void mount() {
        drill(mount_ul);
        drill(mount_ur);
@@ -76,20 +87,25 @@ void mount() {
        drill(mount_lr);
 }
 
+void pins() {
+       pin(pin_l);
+       pin(pin_r);
+}
+
 real ysplit = ymm(1500);
 real ygap = pixtomm(1536 - 1442);
 
 void contact(pos_t ul, pos_t lr, string name, string num) {
        pad_mm((ul.x + lr.x) / 2,
               (ul.y + lr.y) / 2,
-              (lr.x - ul.x),
-              (lr.y - ul.y),
+              abs(lr.x - ul.x),
+              abs(lr.y - ul.y),
               name, num);
 }
 
 void top_contact(real x, real width, string name, string num) {
        contact((pos_t) { .x = x, .y = mll.y },
-               (pos_t) { .x = x + width, .y = ysplit - ygap / 2 },
+               (pos_t) { .x = x + width, .y = ysplit + ygap / 2 },
                name, num);
 }
 
@@ -98,7 +114,7 @@ real contact_right = xmm(2922);
 real contact_width = pixtomm(3267 - 2901);
 
 void bottom_contact(real x, real width, string name, string num) {
-       contact((pos_t) { .x = x, .y = ysplit + ygap / 2 },
+       contact((pos_t) { .x = x, .y = ysplit - ygap / 2 },
                (pos_t) { .x = x + width, .y = ll.y },
                name, num);
 }
@@ -107,6 +123,7 @@ element_start("servo");
 
 outline();
 mount();
+pins();
 
 bottom_contact(contact_left, contact_width, "1", "1");
 bottom_contact(contact_right, contact_width, "2", "2");