git.gag.com Git - hw/altusmetrum/blob - pcb.mk

   1 AM=../altusmetrum
   2 SCHEME=$(AM)/scheme
   3
   4 .SUFFIXES: .sch .pcb .ps .pdf
   5
   6 # need to have PROJECT defined
   7 ifndef PROJECT
   8         PROJECT=undefined
   9 endif
  10
  11 # if SCHEMATICS not defined, default to one sheet with project name
  12 ifndef SCHEMATICS
  13         SCHEMATICS=$(PROJECT).sch
  14 endif
  15
  16 CONFIG=gafrc attribs project
  17
  18 all:    drc partslist partslist.csv pcb
  19
  20 drc:    $(PROJECT).drc
  21
  22 $(PROJECT).drc: $(SCHEMATICS) Makefile $(CONFIG)
  23         -gnetlist -g drc2 $(SCHEMATICS) -o $@
  24
  25 partslists: partslist partslist.csv partslist-dk.csv partslist-check.dk partslist-mouser.csv partslist-other.csv
  26
  27 partslist:      $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
  28         gnetlist -g bom -o $(PROJECT).unsorted $(SCHEMATICS)
  29         head -n1 $(PROJECT).unsorted > partslist
  30         tail -n+2 $(PROJECT).unsorted | sort | awk -f $(AM)/bin/fillpartslist >> partslist
  31         rm -f $(PROJECT).unsorted
  32
  33 partslist.csv:  $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
  34         gnetlist -L $(SCHEME) -g bomAM -o $(PROJECT).csvtmp $(SCHEMATICS)
  35         (head -n1 $(PROJECT).csvtmp; tail -n+2 $(PROJECT).csvtmp | sort -t \, -k 8 | awk -f $(AM)/bin/fillpartscsv | sort ) > $@ && rm -f $(PROJECT).csvtmp
  36
  37 partslist-dk.csv: partslist.csv
  38         $(AM)/bin/partslist-vendor --vendor digikey partslist.csv > $@
  39
  40 partslist-check.dk: partslist.csv
  41         $(AM)/bin/partslist-vendor --vendor digikey --mfg partslist.csv > $@
  42
  43 partslist-mouser.csv: partslist.csv
  44         $(AM)/bin/partslist-vendor --vendor mouser partslist.csv > $@
  45
  46 partslist-other.csv: partslist.csv
  47         $(AM)/bin/partslist-vendor --not-vendor digikey,mouser partslist.csv > $@
  48
  49 $(PROJECT)-seeed.csv: partslist.csv
  50         $(AM)/bin/partslist-vendor --vendor seeed partslist.csv > $@
  51
  52 $(PROJECT)-goldphoenix.csv: partslist.csv
  53         $(AM)/bin/partslist-vendor --vendor goldphoenix partslist.csv > $@
  54
  55 pcb:    $(SCHEMATICS) Makefile $(CONFIG)
  56         gsch2pcb project
  57
  58 $(PROJECT).xy:  $(PROJECT).pcb $(CONFIG)
  59         pcb -x bom $(PROJECT).pcb
  60
  61 $(PROJECT).bottom.gbr:  $(PROJECT).pcb $(CONFIG)
  62         pcb -x gerber $(PROJECT).pcb
  63         @case "$(SILK)" in \
  64         none)   rm -f $(PROJECT).topsilk.gbr $(PROJECT).bottom.gbr; \
  65                 ;; \
  66         top)    rm -f $(PROJECT).bottomsilk.gbr; \
  67                 ;; \
  68         bottom) rm -f $(PROJECT).topsilk.gbr; \
  69                 ;; \
  70         both) \
  71                 ;; \
  72         *)      echo "Invalid silk $(SILK)"; exit 1; \
  73                 ;; \
  74         esac
  75
  76 $(PROJECT).all-drill.cnc: $(PROJECT).bottom.gbr
  77         gerbv -x drill -o $(PROJECT).all-drill.cnc $(PROJECT).*plated-drill.cnc
  78
  79 zip: $(PROJECT).zip
  80
  81 $(PROJECT).zip: $(PROJECT).bottom.gbr $(PROJECT).xy Makefile
  82         rm -f $@ && zip $@ $(PROJECT).*.gbr $(PROJECT).*.cnc $(PROJECT).xy # $(PROJECT).xls
  83
  84 ac: $(PROJECT)-ac.zip $(PROJECT)-bom.csv
  85
  86 $(PROJECT)-bom.csv: partslist.csv
  87         cp partslist.csv $@
  88
  89 $(PROJECT)-ac.zip:  $(PROJECT).bottom.gbr $(PROJECT).xy
  90         cp $(PROJECT).bottom.gbr $(PROJECT).gbl
  91         cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
  92         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
  93                 cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
  94         fi
  95         if [ -f $(PROJECT).bottompaste.gbr ]; then \
  96                 cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
  97         fi
  98         if [ -f $(PROJECT).topsilk.gbr ]; then \
  99                 cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
 100         fi
 101         if [ -f $(PROJECT).toppaste.gbr ]; then \
 102                 cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
 103         fi
 104         cp $(PROJECT).outline.gbr $(PROJECT).gml
 105         cp $(PROJECT).top.gbr $(PROJECT).gtl
 106         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 107         cp $(PROJECT).plated-drill.cnc $(PROJECT).ncd
 108         if [ -f $(PROJECT).unplated-drill.cnc ]; then \
 109                 cp $(PROJECT).unplated-drill.cnc $(PROJECT).drd; \
 110         fi
 111         if [ -f $(PROJECT).fab.gbr ]; then \
 112                 cp $(PROJECT).fab.gbr $(PROJECT).fab; \
 113         fi
 114         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 115                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 116                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 117         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 118                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 119                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 120         fi
 121         rm -f $@ && zip $@ \
 122                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 123                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 124                 $(PROJECT).gml $(PROJECT).ncd $(PROJECT).gml $(PROJECT).drd \
 125                 $(PROJECT).gl2 $(PROJECT).gl3 \
 126                 $(PROJECT).xy $(PROJECT).fab
 127
 128 oshpark: $(PROJECT)-oshpark.zip
 129
 130 $(PROJECT)-oshpark.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc
 131         cp $(PROJECT).bottom.gbr bottom\ layer.ger
 132         cp $(PROJECT).bottommask.gbr bottom\ solder\ mask.ger
 133         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
 134                 cp $(PROJECT).bottomsilk.gbr bottom\ silk\ screen.ger; \
 135         fi
 136         if [ -f $(PROJECT).topsilk.gbr ]; then \
 137                 cp $(PROJECT).topsilk.gbr top\ silk\ screen.ger; \
 138         fi
 139         cp $(PROJECT).outline.gbr board\ outline.ger
 140         cp $(PROJECT).top.gbr top\ layer.ger
 141         cp $(PROJECT).topmask.gbr top\ solder\ mask.ger
 142         cp $(PROJECT).all-drill.cnc drills.xln
 143         if [ -f $(PROJECT).toppaste.gbr ]; then \
 144                 cp $(PROJECT).toppaste.gbr top\ paste.ger; \
 145         fi
 146         if [ -f $(PROJECT).bottompaste.gbr ]; then \
 147                 cp $(PROJECT).bottompaste.gbr bottom\ paste.ger; \
 148         fi
 149         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 150                 cp $(PROJECT).group1.gbr internal\ plane\ 1.ger; \
 151                 cp $(PROJECT).group2.gbr internal\ plane\ 2.ger; \
 152         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 153                 cp $(PROJECT).group2.gbr internal\ plane\ 1.ger; \
 154                 cp $(PROJECT).group3.gbr internal\ plane\ 2.ger; \
 155         fi
 156         rm -f $@ && zip $@ *.ger *.xln
 157
 158 seeed: $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 159
 160 $(PROJECT)-seeed.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf $(PROJECT).xy $(SEEED_EXTRA)
 161         cp $(PROJECT).bottom.gbr $(PROJECT).gbl
 162         cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
 163         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
 164                 cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
 165         fi
 166         if [ -f $(PROJECT).bottompaste.gbr ]; then \
 167                 cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
 168         fi
 169         if [ -f $(PROJECT).topsilk.gbr ]; then \
 170                 cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
 171         fi
 172         if [ -f $(PROJECT).toppaste.gbr ]; then \
 173                 cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
 174         fi
 175         cp $(PROJECT).outline.gbr $(PROJECT).gml
 176         cp $(PROJECT).top.gbr $(PROJECT).gtl
 177         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 178         cp $(PROJECT).all-drill.cnc $(PROJECT).txt
 179         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 180                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 181                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 182         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 183                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 184                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 185         fi
 186         rm -f $@ && zip $@ \
 187                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 188                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 189                 $(PROJECT).gml $(PROJECT).txt \
 190                 $(PROJECT).gl2 $(PROJECT).gl3 \
 191                 $(PROJECT).xy $(PROJECT)-sch.pdf \
 192                 $(SEEED_EXTRA)
 193
 194 goldphoenix: $(PROJECT)-goldphoenix.zip
 195
 196 $(PROJECT)-goldphoenix.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf $(PROJECT).xy $(PROJECT)-goldphoenix.csv
 197         cp $(PROJECT).bottom.gbr $(PROJECT).gbl
 198         cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
 199         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
 200                 cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
 201         fi
 202         if [ -f $(PROJECT).bottompaste.gbr ]; then \
 203                 cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
 204         fi
 205         if [ -f $(PROJECT).topsilk.gbr ]; then \
 206                 cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
 207         fi
 208         if [ -f $(PROJECT).toppaste.gbr ]; then \
 209                 cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
 210         fi
 211         cp $(PROJECT).outline.gbr $(PROJECT).gml
 212         cp $(PROJECT).top.gbr $(PROJECT).gtl
 213         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 214         cp $(PROJECT).all-drill.cnc $(PROJECT).txt
 215         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 216                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 217                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 218         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 219                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 220                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 221         fi
 222         rm -f $@ && zip $@ \
 223                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 224                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 225                 $(PROJECT).gml $(PROJECT).txt \
 226                 $(PROJECT).gl2 $(PROJECT).gl3 \
 227                 $(PROJECT).xy $(PROJECT)-sch.pdf \
 228                 $(PROJECT)-goldphoenix.csv
 229
 230 stencilsunlimited:      $(PROJECT).bottom.gbr $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 231         rm -f $(PROJECT)-stencil.zip && zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 232
 233 stencil:        $(PROJECT).pcb
 234         pcb -x gerber --paste-adjust -0.075 $(PROJECT).pcb
 235         mv $(PROJECT).toppaste.gbr stencil.gbr
 236
 237 clean:
 238         rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip
 239         rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln
 240         rm -f *.partslist *.new.pcb *.unsorted $(PROJECT).xls muffin-5267.pdf muffin-keithp.pdf
 241         rm -f partslist-check.dk partslist-dk.csv partslist-mouser.csv partslist-other.csv
 242         rm -f $(PROJECT)-sch.ps $(PROJECT)-sch.pdf $(PROJECT)-pcb.ps $(PROJECT)-pcb.pdf
 243         rm -f $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp $(PROJECT).ncd
 244         rm -f $(PROJECT).gto $(PROJECT).gtp $(PROJECT).gml $(PROJECT).gtl $(PROJECT).gts
 245         rm -f $(PROJECT).txt $(PROJECT).gl2 $(PROJECT).gl3 $(PROJECT).fab
 246         rm -f $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 247         rm -f $(PROJECT)-goldphoenix.zip $(PROJECT)-goldphoenix.csv
 248         rm -f $(PROJECT)*.ps $(PROJECT)*.pdf
 249
 250 muffins: muffin-6570.pdf muffin-5267.pdf muffin-keithp.pdf
 251
 252 muffin-6570.pdf: partslist.csv $(AM)/glabels/muffin-6570.glabels
 253         glabels-3-batch $(AM)/glabels/muffin-6570.glabels -i partslist.csv -o $@ > /dev/null
 254
 255 muffin-5267.pdf: partslist.csv $(AM)/glabels/muffin-short-5267.glabels
 256         glabels-3-batch $(AM)/glabels/muffin-short-5267.glabels -i partslist.csv -o $@ > /dev/null
 257
 258 muffin-keithp.pdf: partslist.csv $(AM)/glabels/muffin-5267.glabels
 259         glabels-3-batch $(AM)/glabels/muffin-5267.glabels -i partslist.csv -o $@ > /dev/null
 260
 261 .ps.pdf:
 262         ps2pdf $*.ps
 263
 264 SCHEMATICS_PDF=$(SCHEMATICS:.sch=.pdf)
 265
 266 $(PROJECT)-sch.pdf:     $(SCHEMATICS)
 267         lepton-cli export -o $@ $(SCHEMATICS)
 268
 269 $(PROJECT)-pcb.ps:      $(PROJECT).pcb $(CONFIG)
 270         pcb -x ps --psfile $@ --media Letter --ps-color $(PROJECT).pcb
 271
 272 $(PROJECT)-pcb.pdf:     $(PROJECT)-pcb.ps
 273         ps2pdf $(PROJECT)-pcb.ps
 274
 275 $(PROJECT)-big.ps:      $(PROJECT).pcb $(CONFIG)
 276         pcb -x ps --psfile $@ --media Letter --ps-color --fill-page --no-align-marks $(PROJECT).pcb
 277
 278 $(PROJECT)-big.pdf:     $(PROJECT)-big.ps
 279         ps2pdf $(PROJECT)-big.ps
 280
 281 pdf:    $(PROJECT)-sch.pdf $(PROJECT)-pcb.pdf $(PROJECT)-big.pdf
 282
 283 project:
 284         (echo 'schematics $(SCHEMATICS)'; \
 285          echo 'output-name $(PROJECT)'; \
 286          echo 'elements-dir $(AM)/packages'; \
 287          echo 'skip-m4') > $@
 288
 289 attribs: $(AM)/attribs
 290         cp $(AM)/attribs $@
 291
 292 gafrc:
 293         (echo '; empty the library path and populate it with only our own symbols'; \
 294          echo '(reset-component-library)'; \
 295          echo '(load "../altusmetrum/gafrc")') > $@
 296
 297 .gitignore: $(AM)/gitignore.in
 298         sed 's/@@PROJECT@@/$(PROJECT)/g' $(AM)/gitignore.in > .gitignore