Added support for ST nucleo devices.

Nucleo boards using the same endpoint for IN and OUT (1). This patch
fix it.

diff --git a/49-stlinkv2-1.rules b/49-stlinkv2-1.rules
new file mode 100644 (file)
index 0000000..a5a79b9
--- /dev/null
+++ b/49-stlinkv2-1.rules
@@ -0,0 +1,12 @@
+# stm32 nucleo boards, with onboard st/linkv2-1
+# ie, STM32F0, STM32F4.
+# STM32VL has st/linkv1, which is quite different
+
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374b", \
+    MODE:="0666", \
+    SYMLINK+="stlinkv2-1_%n"
+
+# If you share your linux system with other users, or just don't like the
+# idea of write permission for everybody, you can replace MODE:="0666" with
+# OWNER:="yourusername" to create the device owned by you, or with
+# GROUP:="somegroupname" and mange access using standard unix groups.

diff --git a/src/stlink-common.h b/src/stlink-common.h
index ee16d5a63fc528f5778be48f9390e24a7459aa2e..40056040837a9bdc4a9e46a08eb7073efc96b724 100644 (file)
--- a/src/stlink-common.h
+++ b/src/stlink-common.h
@@ -1,7 +1,7 @@
-/* 
+/*
  * File:   stlink-common.h
  * Bulk import from stlink-hw.h
- * 
+ *
  * This should contain all the common top level stlink interfaces, regardless
  * of how the backend does the work....
  */
@@ -24,6 +24,7 @@ extern "C" {
 #define USB_ST_VID                     0x0483
 #define USB_STLINK_PID                 0x3744
 #define USB_STLINK_32L_PID             0x3748
+#define USB_STLINK_NUCLEO_PID  0x374b
 
     // STLINK_DEBUG_RESETSYS, etc:
 #define STLINK_OK                      0x80
@@ -67,7 +68,7 @@ extern "C" {
 #define STLINK_DEBUG_WRITEDEBUGREG     0x0f
 #define STLINK_DEBUG_ENTER_SWD         0xa3
 #define STLINK_DEBUG_ENTER_JTAG        0x00
-    
+
     // TODO - possible poor names...
 #define STLINK_SWD_ENTER 0x30
 #define STLINK_SWD_READCOREID 0x32  // TBD
@@ -144,8 +145,8 @@ extern "C" {
        uint32_t sram_size;
        uint32_t bootrom_base, bootrom_size;
     } chip_params_t;
-    
-    
+
+
 // These maps are from a combination of the Programming Manuals, and
 // also the Reference manuals.  (flash size reg is normally in ref man)
 static const chip_params_t devices[] = {
@@ -324,7 +325,7 @@ static const chip_params_t devices[] = {
         },
  };
 
-    
+
     typedef struct {
         uint32_t r[16];
         uint32_t s[32];
@@ -341,7 +342,7 @@ static const chip_params_t devices[] = {
     } reg;
 
     typedef uint32_t stm32_addr_t;
-    
+
     typedef struct _cortex_m3_cpuid_ {
         uint16_t implementer_id;
         uint16_t variant;
@@ -431,7 +432,7 @@ static const chip_params_t devices[] = {
 #define STM32L_SRAM_SIZE (16 * 1024)
         stm32_addr_t sram_base;
         size_t sram_size;
-        
+
         // bootloader
         stm32_addr_t sys_base;
         size_t sys_size;
@@ -476,7 +477,7 @@ static const chip_params_t devices[] = {
     int stlink_fwrite_flash(stlink_t *sl, const char* path, stm32_addr_t addr);
     int stlink_fwrite_sram(stlink_t *sl, const char* path, stm32_addr_t addr);
     int stlink_verify_write_flash(stlink_t *sl, stm32_addr_t address, uint8_t *data, uint32_t length);
-    
+
     // PUBLIC
     uint32_t stlink_chip_id(stlink_t *sl);
     void stlink_cpu_id(stlink_t *sl, cortex_m3_cpuid_t *cpuid);
@@ -502,7 +503,7 @@ static const chip_params_t devices[] = {
 
 
 #include "stlink-sg.h"
-#include "stlink-usb.h"    
+#include "stlink-usb.h"
 
 
 

diff --git a/src/stlink-usb.c b/src/stlink-usb.c
index ec4053ac7bd050bd3d4f0f91b750084902e7a94a..fe841833def90eb9ea6f588044285696859c85b0 100644 (file)
--- a/src/stlink-usb.c
+++ b/src/stlink-usb.c
@@ -782,7 +782,7 @@ stlink_t* stlink_open_usb(const int verbose, int reset) {
         if (desc.idVendor!=USB_ST_VID) continue;
         if (devBus && devAddr)
             if ((libusb_get_bus_number(list[cnt])!=devBus) || (libusb_get_device_address(list[cnt])!=devAddr)) continue;
-        if (desc.idProduct == USB_STLINK_32L_PID) break;
+        if ( (desc.idProduct == USB_STLINK_32L_PID) || (desc.idProduct == USB_STLINK_NUCLEO_PID) ) break;
         if (desc.idProduct == USB_STLINK_PID) {
             slu->protocoll = 1;
             break;
@@ -843,9 +843,14 @@ stlink_t* stlink_open_usb(const int verbose, int reset) {
         WLOG("libusb_alloc_transfer failed\n");
         goto on_libusb_error;
     }
+
     // TODO - could use the scanning techniq from stm8 code here...
     slu->ep_rep = 1 /* ep rep */ | LIBUSB_ENDPOINT_IN;
-    slu->ep_req = 2 /* ep req */ | LIBUSB_ENDPOINT_OUT;
+    if (desc.idProduct == USB_STLINK_NUCLEO_PID) {
+       slu->ep_req = 1 /* ep req */ | LIBUSB_ENDPOINT_OUT;
+    } else {
+       slu->ep_req = 2 /* ep req */ | LIBUSB_ENDPOINT_OUT;
+    }
 
     slu->sg_transfer_idx = 0;
     // TODO - never used at the moment, always CMD_SIZE