renaming the README file to README.md

diff --git a/stlinkv1_macosx_driver/README b/stlinkv1_macosx_driver/README
deleted file mode 100644 (file)
index b789d24..0000000
--- a/stlinkv1_macosx_driver/README
+++ /dev/null
@@ -1,46 +0,0 @@
-from: marco.cassinerio@gmail.com
-to: texane@gmail.com
-
-Hi,
-
-i managed to get the stlink v1 working under os x and i would like to share the solution so maybe you can
-add it in your package.
-The problem is that os x claims the device as scsi and libusb won't be able to connect to it.
-I've created what is called a codeless driver which claims the device and has a higher priority then the
-default apple mass storage driver, so the device can be accessed through libusb.
-
-I tested this codeless driver under OS X 10.6.8 and 10.7.2. I assume it works with any 10.6.x and 10.7.x
-version as well.
-
-Attached to this mail you'll find the osx folder with the source code of the driver, both drivers (for
-10.6.x and 10.7.x), an install.sh script and the modified Makefile, i only added a line at the end which
-invoke the install.sh.
-
-First, unpack the osx.tar.gz contents:
-```bash
-tar xzvf osx.tar.gz
-```
-
-Then, install the driver using:
-```bash
-sudo make osx_stlink_shield
-```
-
-no reboot required.
-
-P.S. If error `OS X version not supported` occurs. For the latest versions of Mac OS X you may need to change the `osx/install.sh` as follows:
-```bash
-< ISOSXLION=$(sw_vers -productVersion)
----
-> ISOSXLION=$(sw_vers -productVersion | sed -e 's:.[[:digit:]]*$::')
-```
-
-FOR OS X 10.10 Yosemite you must force the system to load unsigned kernelextensions
-
-```bash
-sudo nvram boot-args="kext-dev-mode=1“
-```
-
-reboot the system!
-
-(Update from another user) FOR OS X 10.11 El Capitan: the Yosemite kext works for my 10.11.4.

diff --git a/stlinkv1_macosx_driver/README.md b/stlinkv1_macosx_driver/README.md
new file mode 100644 (file)
index 0000000..b789d24
--- /dev/null
+++ b/stlinkv1_macosx_driver/README.md
@@ -0,0 +1,46 @@
+from: marco.cassinerio@gmail.com
+to: texane@gmail.com
+
+Hi,
+
+i managed to get the stlink v1 working under os x and i would like to share the solution so maybe you can
+add it in your package.
+The problem is that os x claims the device as scsi and libusb won't be able to connect to it.
+I've created what is called a codeless driver which claims the device and has a higher priority then the
+default apple mass storage driver, so the device can be accessed through libusb.
+
+I tested this codeless driver under OS X 10.6.8 and 10.7.2. I assume it works with any 10.6.x and 10.7.x
+version as well.
+
+Attached to this mail you'll find the osx folder with the source code of the driver, both drivers (for
+10.6.x and 10.7.x), an install.sh script and the modified Makefile, i only added a line at the end which
+invoke the install.sh.
+
+First, unpack the osx.tar.gz contents:
+```bash
+tar xzvf osx.tar.gz
+```
+
+Then, install the driver using:
+```bash
+sudo make osx_stlink_shield
+```
+
+no reboot required.
+
+P.S. If error `OS X version not supported` occurs. For the latest versions of Mac OS X you may need to change the `osx/install.sh` as follows:
+```bash
+< ISOSXLION=$(sw_vers -productVersion)
+---
+> ISOSXLION=$(sw_vers -productVersion | sed -e 's:.[[:digit:]]*$::')
+```
+
+FOR OS X 10.10 Yosemite you must force the system to load unsigned kernelextensions
+
+```bash
+sudo nvram boot-args="kext-dev-mode=1“
+```
+
+reboot the system!
+
+(Update from another user) FOR OS X 10.11 El Capitan: the Yosemite kext works for my 10.11.4.