that case. Report advance in half-word writing. Setting stack and PC give
access error so automatic start fails too and hardware needs to be hard-reset
to start
fprintf(stdout,"\rFlash page at %5d/%5d erased", i, num_pages);
fflush(stdout);
}
fprintf(stdout,"\rFlash page at %5d/%5d erased", i, num_pages);
fflush(stdout);
}
}
else {
/* wait for ongoing op to finish */
}
else {
/* wait for ongoing op to finish */
unsigned int count;
uint32_t val;
flash_loader_t fl;
unsigned int count;
uint32_t val;
flash_loader_t fl;
ILOG("Starting Half page flash write for STM32L core id\n");
/* flash loader initialization */
if (init_flash_loader(sl, &fl) == -1) {
ILOG("Starting Half page flash write for STM32L core id\n");
/* flash loader initialization */
if (init_flash_loader(sl, &fl) == -1) {
while ((stlink_read_debug32(sl, STM32L_FLASH_SR) & (1 << 0)) != 0) {
}
}
while ((stlink_read_debug32(sl, STM32L_FLASH_SR) & (1 << 0)) != 0) {
}
}
val = stlink_read_debug32(sl, STM32L_FLASH_PECR);
val &= ~(1 << FLASH_L1_PROG);
stlink_write_debug32(sl, STM32L_FLASH_PECR, val);
val = stlink_read_debug32(sl, STM32L_FLASH_PECR);
val &= ~(1 << FLASH_L1_PROG);
stlink_write_debug32(sl, STM32L_FLASH_PECR, val);
fprintf(stderr, "pecr.prglock not clear\n");
return -1;
}
fprintf(stderr, "pecr.prglock not clear\n");
return -1;
}
if (len > L1_WRITE_BLOCK_SIZE) {
if (stm32l1_write_half_pages(sl, addr, base, len/L1_WRITE_BLOCK_SIZE) == -1){
if (len > L1_WRITE_BLOCK_SIZE) {
if (stm32l1_write_half_pages(sl, addr, base, len/L1_WRITE_BLOCK_SIZE) == -1){
+ /* This may happen on a blank device! */
WLOG("\nwrite_half_pages failed == -1\n");
WLOG("\nwrite_half_pages failed == -1\n");
+ }
+ else{
+ off = (len /L1_WRITE_BLOCK_SIZE)*L1_WRITE_BLOCK_SIZE;
+ }
+ }
/* write remainingword in program memory */
/* write remainingword in program memory */
- for (off = (len /L1_WRITE_BLOCK_SIZE)*L1_WRITE_BLOCK_SIZE; off < len; off += sizeof(uint32_t)) {
+ for ( ; off < len; off += sizeof(uint32_t)) {
+ if (off > 254)
+ fprintf(stdout, "\r");
+
+ if ((off % sl->flash_pgsz) > (sl->flash_pgsz -5)) {
+ fprintf(stdout, "\r%3u/%u pages written",
+ off/sl->flash_pgsz, len/sl->flash_pgsz);
+ fflush(stdout);
+ }
+
write_uint32((unsigned char*) &data, *(uint32_t*) (base + off));
stlink_write_debug32(sl, addr + off, data);
write_uint32((unsigned char*) &data, *(uint32_t*) (base + off));
stlink_write_debug32(sl, addr + off, data);
stlink_run(sl);
/* wait until done (reaches breakpoint) */
stlink_run(sl);
/* wait until done (reaches breakpoint) */
- while ((is_core_halted(sl) == 0) && (i <10000))
+ while ((is_core_halted(sl) == 0) && (i <1000))
fprintf(stderr, "run error\n");
return -1;
}
fprintf(stderr, "run error\n");
return -1;
}