--- /dev/null
+# Test suite Makefile
+# Part of SDCC - http://sdcc.sourceforge.net/
+# Michael Hope <michaelh@juju.net.nz> 2001
+#
+# This Makefile builds and runs the test suites under tests/ for each
+# one of the supported ports located under ports/. The test suite
+# results are summarised and individual test failures are logged. The
+# expected result is a single line per port summarising the number of
+# failures, test points, and test cases. The philosophy is that
+# checked in code should always pass the suite with no failures, as
+# then if there are failures then it is in the current developers code.
+#
+# Only the required suites are run. Changing sdcc causes all to be
+# re-run. Changing one suite causes just that to be run. Changing
+# one of the library files should cause all to re-run
+
+# Dependancies:
+# * The sdcc-extra package, available from CVS.
+# o cvs -d cvs.sdcc.sourceforge.net:/cvsroot/sdcc co sdcc-extra
+# o Provides the emulators
+# * The gbdk-lib package from gbdk.
+# o cvs -d cvs.gbdk.sourceforge.net:/cvsroot/gbdk co gbdk-lib
+# o Proviles mul, div, and include files for the z80 tests.
+# * python 1.5 or above
+# * uCsim for the mcs51 port
+#
+# The paths below assume that sdcc, sdcc-extra, and gbdk-lib all reside in
+# the same directory.
+
+# Old notes:
+# Starting at the bottom
+# Set of source test suites
+# Each source suite is processesd producing multiple device specific test suites.
+# Each device specific test suite is compiled.
+# Each device specific test suite is run, and the output recorded.
+# The output from each device specific test suite derrived from a source
+# test suite are collated.
+
+# Uncomment this to show only errors and the summary.
+# Comment this out for debugging.
+.SILENT:
+
+CC = @CC@
+
+# All original tests live in TESTS_DIR and below
+TESTS_DIR = tests
+TESTS_NAME = $(TESTS_DIR)
+# All suite results go in RESULTS_DIR
+RESULTS_DIR = results
+# All data relating to supported ports live in their own directory
+# under PORTS_DIR.
+PORTS_DIR = ports
+
+# Itermediate data directories
+# Directory that generated cases and the related object code go.
+CASES_DIR = gen
+
+# Script that takes a source test suite and generates the iterations
+GENERATE_CASES = generate-cases.py
+
+# Magically generate the list of configured ports to test.
+# Each directory under ports/ is used as a port name. Each port is tested.
+# Each port must have a spec.mk which describes how to build the object
+# files and how to run the emulator.
+ALL_PORTS = $(filter-out CVS xa51 ucz80 gbz80,$(notdir $(wildcard $(PORTS_DIR)/*)))
+
+# These ports will be cleaned with 'make clean'
+CLEAN_PORTS = $(filter-out CVS,$(notdir $(wildcard $(PORTS_DIR)/*)))
+
+MAKE_LIBRARY =
+
+all: test-ports
+
+# Test all of the ports
+test-ports:
+ for i in $(ALL_PORTS); do $(MAKE) make_library test-port PORT=$$i; done
+
+# Helper rule for testing the z80 port only
+test-z80:
+ $(MAKE) test-port PORT=z80
+
+# Helper rule for testing the z80 port only
+test-gbz80:
+ $(MAKE) test-port PORT=gbz80
+
+# Helper rule for testing the mcs51 port only
+test-mcs51:
+ $(MAKE) test-port PORT=mcs51
+
+test-mcs51-large:
+ $(MAKE) test-port PORT=mcs51-large
+
+test-mcs51-stack-auto:
+ $(MAKE) make_library test-port PORT=mcs51-stack-auto
+
+test-mcs51-xstack-auto:
+ $(MAKE) make_library test-port PORT=mcs51-xstack-auto
+
+# Helper rule for testing the ds390 port only
+test-ds390:
+ $(MAKE) test-port PORT=ds390
+
+# Helper rule for testing the z80 port only(use ucSim simulator)
+test-ucz80:
+ $(MAKE) test-port PORT=ucz80
+
+# Helper rule for testing the hc08 port only(use ucSim simulator)
+test-hc08:
+ $(MAKE) test-port PORT=hc08
+
+# Helper rule for testing the xa51 port only(use ucSim simulator)
+test-xa51:
+ $(MAKE) test-port PORT=xa51
+
+### Helper rule for testing the host cc only
+test-host:
+ $(MAKE) test-port PORT=host
+
+test-host2:
+ $(MAKE) test-port PORT=host
+
+# Begin per-port rules
+# List of all of the known source test suites.
+ALL_TESTS = $(shell find $(TESTS_DIR) -name "*.c")
+
+# Intermediate directory
+PORT_CASES_DIR = $(CASES_DIR)/$(PORT)
+PORT_RESULTS_DIR = $(RESULTS_DIR)/$(PORT)
+# Each test generates a result log file
+PORT_RESULTS = $(ALL_TESTS:$(TESTS_DIR)/%.c=$(PORT_RESULTS_DIR)/%.out)
+
+SDCC_DIR = ../..
+SDCC_EXTRA_DIR = ../../../sdcc-extra
+INC_DIR = $(SDCC_DIR)/device/include
+
+# Defaults. Override in spec.mk if required.
+# Path to SDCC
+SDCC = $(SDCC_DIR)/bin/sdcc
+# Base flags.
+SDCCFLAGS +=
+# Extension of object intermediate files
+OBJEXT = .o
+# Extension of files that can be run in the emulator
+EXEEXT = .bin
+# Currently unused. Extension to append to intermediate directories.
+DIREXT =
+
+# Only include if we're in a per-port call.
+ifdef PORT
+include $(PORTS_DIR)/$(PORT)/spec.mk
+endif
+
+make_library: $(MAKE_LIBRARY)
+
+SDCCFLAGS += -Ifwk/include -Itests -I$(INC_DIR)
+
+# List of intermediate files to keep. Pretty much keep everything as
+# disk space is free.
+.PRECIOUS: $(PORT_CASES_DIR)/% %$(OBJEXT) %$(EXEEXT)
+
+# Rule to generate the iterations of a test suite off the soure suite.
+$(PORT_CASES_DIR)/%/iterations.stamp: $(TESTS_DIR)/%.c $(GENERATE_CASES)
+ echo Processing $<
+ rm -rf `dirname $@`
+ mkdir -p `dirname $@`
+ python $(GENERATE_CASES) $< `dirname $@` > /dev/null
+ touch $@
+
+# Rule linking the combined results log to all of the files in the
+# iteration directory.
+$(PORT_RESULTS_DIR)/%.out: $(PORT_CASES_DIR)/%/iterations.stamp
+ $(MAKE) iterations PORT=$(PORT) CASES=`dirname $<`
+
+# Rule to summaries the results for one port after all of the tests
+# have been run.
+port-results: port-dirs $(PORT_RESULTS)
+ echo Summary for \'$(PORT)\': `cat $(PORT_RESULTS) | python collate-results.py`
+
+port-dirs:
+ mkdir -p $(PORT_CASES_DIR) $(PORT_RESULTS_DIR)
+
+test-port: port-results
+
+# Begin rules that process each iteration generated from the source
+# test
+
+# List of all of the generated iteration source files.
+SUB_CASES = $(sort $(wildcard $(CASES)/*.c))
+# List of all the sub result logs generated from the iterations.
+SUB_RESULTS = $(SUB_CASES:%.c=%.out)
+# Overall target. Concatenation of all of the sub results.
+RESULTS = $(CASES:$(CASES_DIR)/%$(DIREXT)=$(RESULTS_DIR)/%.out)
+
+iterations: $(RESULTS)
+
+# Rule to generate the overall target from the sub results.
+$(RESULTS): $(SUB_RESULTS)
+ cat $(SUB_RESULTS) > $@
+
+# The remainder of the rules are in $PORT/spec.mak. The port needs to
+# be able to turn an iterated test suite into a sub result, normally
+# by:
+# 1. Compile the required library files
+# 2. Compile this test suite.
+# 3. Link 1, 2, and any required stdlib into an executable.
+# 4. Run the executable inside an emulator, and capture the text
+# output into %.out.
+#
+# The emulator must exit when main() returns.
+
+# BeginGeneric rules
+
+clean:
+ rm -rf $(CASES_DIR) $(RESULTS_DIR) *.pyc fwk/lib/timeout fwk/lib/timeout.exe
+ for i in $(CLEAN_PORTS); do $(MAKE) -f $(PORTS_DIR)/$$i/spec.mk _clean PORTS_DIR=$(PORTS_DIR) PORT=$$i; done
projects / fw / sdcc / commitdiff