cfi: made som info output debug output

E.g. how much target memory that is used during flashing
is debug info.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c
index a64d78f5576dae88e7b08ed622dfefa0276fba59..f88f16c81af0aa05cb81c98c68b7466c92600506 100644 (file)
--- a/src/flash/nor/cfi.c
+++ b/src/flash/nor/cfi.c
@@ -1141,7 +1141,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, uint3
        busy_pattern_val  = cfi_command_val(bank, 0x80);
        error_pattern_val = cfi_command_val(bank, 0x7e);
 
-       LOG_INFO("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size);
+       LOG_DEBUG("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size);
 
        /* Programming main loop */
        while (count > 0)
@@ -1162,7 +1162,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, uint3
                buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
                buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
 
-               LOG_INFO("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address);
+               LOG_DEBUG("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address);
 
                /* Execute algorithm, assume breakpoint for last instruction */
                retval = target_run_algorithm(target, 0, NULL, 7, reg_params,