kinetis: update support for all program flash granularities
authorChristopher Kilgour <techie@whiterocker.com>
Wed, 23 May 2012 18:05:28 +0000 (11:05 -0700)
committerSpencer Oliver <spen@spen-soft.co.uk>
Tue, 26 Jun 2012 11:53:37 +0000 (11:53 +0000)
Updates the Kinetis NOR flash support to handle all known block and sector
sizes.  Previously only 2kiB sectors were hard-coded, now all four known
combinations non-volatile sector sizes are supported.

The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is
also introduced.  This means each "block" of flash (in Freescale terms) is
treated as a bank in OpenOCD.  Correspondingly, the existing board
configuration for the TWR-K60M512 eval system is updated to recognize two
banks instead of one.

A board config for the TWR-K60F120M is also added.

Bank and sector erase and programming has been checked with both of the
mentioned eval boards.

Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Reviewed-on: http://openocd.zylin.com/663
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
src/flash/nor/kinetis.c
tcl/board/twr-k60f120m.cfg [new file with mode: 0644]
tcl/board/twr-k60n512.cfg

index 46d36bbb97d82d9eeb1db78d6118a29b09e0a64e..cf36104a441f6971e96054a413c23e23b0fc3425 100644 (file)
@@ -5,6 +5,9 @@
  *   Copyright (C) 2011 sleep(5) ltd                                       *
  *   tomas@sleepfive.com                                                   *
  *                                                                         *
+ *   Copyright (C) 2012 by Christopher D. Kilgour                          *
+ *   techie at whiterocker.com                                             *
+ *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
 #include "imp.h"
 #include "helper/binarybuffer.h"
 
-struct kinetis_flash_bank {
-       uint32_t nvm_start;
+/*
+ * Implementation Notes
+ *
+ * The persistent memories in the Kinetis chip families K10 through
+ * K70 are all manipulated with the Flash Memory Module.  Some
+ * variants call this module the FTFE, others call it the FTFL.  To
+ * indicate that both are considered here, we use FTFX.
+ *
+ * Within the module, according to the chip variant, the persistent
+ * memory is divided into what Freescale terms Program Flash, FlexNVM,
+ * and FlexRAM.  All chip variants have Program Flash.  Some chip
+ * variants also have FlexNVM and FlexRAM, which always appear
+ * together.
+ *
+ * A given Kinetis chip may have 2 or 4 blocks of flash.  Here we map
+ * each block to a separate bank.  Each block size varies by chip and
+ * may be determined by the read-only SIM_FCFG1 register.  The sector
+ * size within each bank/block varies by the chip granularity as
+ * described below.
+ *
+ * Kinetis offers four different of flash granularities applicable
+ * across the chip families.  The granularity is apparently reflected
+ * by at least the reference manual suffix.  For example, for chip
+ * MK60FN1M0VLQ12, reference manual K60P144M150SF3RM ends in "SF3RM",
+ * where the "3" indicates there are four flash blocks with 4kiB
+ * sectors.  All possible granularities are indicated below.
+ *
+ * The first half of the flash (1 or 2 blocks, depending on the
+ * granularity) is always Program Flash and always starts at address
+ * 0x00000000.  The "PFLSH" flag, bit 23 of the read-only SIM_FCFG2
+ * register, determines whether the second half of the flash is also
+ * Program Flash or FlexNVM+FlexRAM.  When PFLSH is set, the second
+ * half of flash is Program Flash and is contiguous in the memory map
+ * from the first half.  When PFLSH is clear, the second half of flash
+ * is FlexNVM and always starts at address 0x10000000.  FlexRAM, which
+ * is also present when PFLSH is clear, always starts at address
+ * 0x14000000.
+ *
+ * The Flash Memory Module provides a register set where flash
+ * commands are loaded to perform flash operations like erase and
+ * program.  Different commands are available depending on whether
+ * Program Flash or FlexNVM/FlexRAM is being manipulated.  Although
+ * the commands used are quite consistent between flash blocks, the
+ * parameters they accept differ according to the flash granularity.
+ * Some Kinetis chips have different granularity between Program Flash
+ * and FlexNVM/FlexRAM, so flash command arguments may differ between
+ * blocks in the same chip.
+ *
+ * Although not documented as such by Freescale, it appears that bits
+ * 8:7 of the read-only SIM_SDID register reflect the granularity
+ * settings 0..3, so sector sizes and block counts are applicable
+ * according to the following table.
+ */
+const struct {
+       unsigned pflash_sector_size_bytes;
+       unsigned nvm_sector_size_bytes;
+       unsigned num_blocks;
+} kinetis_flash_params[4] = {
+       { 1<<10, 1<<10, 2 },
+       { 2<<10, 1<<10, 2 },
+       { 2<<10, 2<<10, 2 },
+       { 4<<10, 4<<10, 4 }
 };
 
-static int kinetis_get_master_bank(struct flash_bank *bank,
-       struct flash_bank **master_bank)
-{
-       *master_bank = get_flash_bank_by_name_noprobe(bank->name);
-       if (*master_bank == NULL) {
-               LOG_ERROR("master flash bank '%s' does not exist",
-                       (char *)bank->driver_priv);
-               return ERROR_FLASH_OPERATION_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int kinetis_update_bank_info(struct flash_bank *bank)
-{
-       int result;
-       struct flash_bank *master_bank;
-
-       result = kinetis_get_master_bank(bank, &master_bank);
-
-       if (result != ERROR_OK)
-               return result;
-
-       /* update the info we do not have */
-       bank->size = master_bank->size;
-       bank->chip_width = master_bank->chip_width;
-       bank->bus_width = master_bank->bus_width;
-       bank->num_sectors = master_bank->num_sectors;
-       bank->sectors = master_bank->sectors;
-
-       return ERROR_OK;
-}
+struct kinetis_flash_bank {
+       unsigned granularity;
+       unsigned bank_ordinal;
+       uint32_t sector_size;
+       uint32_t protection_size;
+
+       uint32_t sim_sdid;
+       uint32_t sim_fcfg1;
+       uint32_t sim_fcfg2;
+
+       enum {
+               FC_AUTO = 0,
+               FC_PFLASH,
+               FC_FLEX_NVM,
+               FC_FLEX_RAM,
+       } flash_class;
+};
 
 FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command)
 {
@@ -84,76 +132,71 @@ FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command)
 }
 
 static int kinetis_protect(struct flash_bank *bank, int set, int first,
-       int last)
+                          int last)
 {
-       int result;
-       struct flash_bank *master_bank;
-
-       result = kinetis_get_master_bank(bank, &master_bank);
-
-       if (result != ERROR_OK)
-               return result;
-
        LOG_WARNING("kinetis_protect not supported yet");
+       /* FIXME: TODO */
 
        if (bank->target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       return ERROR_OK;
+       return ERROR_FLASH_BANK_INVALID;
 }
 
 static int kinetis_protect_check(struct flash_bank *bank)
 {
-       int result;
-       struct flash_bank *master_bank;
-       uint8_t buffer[4];
-       uint32_t fprot, psize, psec;
-       int i, b;
+       struct kinetis_flash_bank *kinfo = bank->driver_priv;
 
        if (bank->target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       result = kinetis_get_master_bank(bank, &master_bank);
-
-       if (result != ERROR_OK)
-               return result;
-
-       /* read protection register FTFL_FPROT */
-       result = target_read_memory(bank->target, 0x40020010, 1, 4, buffer);
-
-       if (result != ERROR_OK)
-               return result;
-
-       fprot = target_buffer_get_u32(bank->target, buffer);
+       if (kinfo->flash_class == FC_PFLASH) {
+               int result;
+               uint8_t buffer[4];
+               uint32_t fprot, psec;
+               int i, b;
 
-       /* every bit protect 1/32 of the full flash */
-       psize = bank->size / 32;
-       psec = 0;
-       b = 0;
+               /* read protection register FTFx_FPROT */
+               result = target_read_memory(bank->target, 0x40020010, 1, 4, buffer);
 
-       for (i = 0; i < bank->num_sectors; i++) {
-               if ((fprot >> b) & 1)
-                       bank->sectors[i].is_protected = 0;
-               else
-                       bank->sectors[i].is_protected = 1;
-
-               psec += bank->sectors[i].size;
+               if (result != ERROR_OK)
+                       return result;
 
-               if (psec >= psize) {
-                       psec = 0;
-                       b++;
+               fprot = target_buffer_get_u32(bank->target, buffer);
+
+               /*
+                * Every bit protects 1/32 of the full flash (not necessarily
+                * just this bank), but we enforce the bank ordinals for
+                * PFlash to start at zero.
+                */
+               b = kinfo->bank_ordinal * (bank->size / kinfo->protection_size);
+               for (psec = 0, i = 0; i < bank->num_sectors; i++) {
+                       if ((fprot >> b) & 1)
+                               bank->sectors[i].is_protected = 0;
+                       else
+                               bank->sectors[i].is_protected = 1;
+
+                       psec += bank->sectors[i].size;
+
+                       if (psec >= kinfo->protection_size) {
+                               psec = 0;
+                               b++;
+                       }
                }
+       } else {
+               LOG_ERROR("Protection checks for FlexNVM not yet supported");
+               return ERROR_FLASH_BANK_INVALID;
        }
 
        return ERROR_OK;
 }
 
-static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0,
-       uint32_t w1, uint32_t w2)
+static int kinetis_ftfx_command(struct flash_bank *bank, uint32_t w0,
+                               uint32_t w1, uint32_t w2, uint8_t *ftfx_fstat)
 {
        uint8_t buffer[12];
        int result, i;
@@ -199,21 +242,19 @@ static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0,
        /* wait for done */
        for (i = 0; i < 50; i++) {
                result =
-                       target_read_memory(bank->target, 0x40020000, 1, 1, buffer);
+                       target_read_memory(bank->target, 0x40020000, 1, 1, ftfx_fstat);
 
                if (result != ERROR_OK)
                        return result;
 
-               if (buffer[0] & 0x80)
+               if (*ftfx_fstat & 0x80)
                        break;
-
-               buffer[0] = 0x00;
        }
 
-       if (buffer[0] != 0x80) {
+       if ((*ftfx_fstat & 0xf0) != 0x80) {
                LOG_ERROR
-                       ("ftfl command failed FSTAT: %02X W0: %08X W1: %08X W2: %08X",
-                       buffer[0], w0, w1, w2);
+                       ("ftfx command failed FSTAT: %02X W0: %08X W1: %08X W2: %08X",
+                        *ftfx_fstat, w0, w1, w2);
 
                return ERROR_FLASH_OPERATION_FAILED;
        }
@@ -223,7 +264,6 @@ static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0,
 
 static int kinetis_erase(struct flash_bank *bank, int first, int last)
 {
-       struct flash_bank *master_bank;
        int result, i;
        uint32_t w0 = 0, w1 = 0, w2 = 0;
 
@@ -232,19 +272,20 @@ static int kinetis_erase(struct flash_bank *bank, int first, int last)
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       result = kinetis_get_master_bank(bank, &master_bank);
-
-       if (result != ERROR_OK)
-               return result;
-
        if ((first > bank->num_sectors) || (last > bank->num_sectors))
                return ERROR_FLASH_OPERATION_FAILED;
 
+       /*
+        * FIXME: TODO: use the 'Erase Flash Block' command if the
+        * requested erase is PFlash or NVM and encompasses the entire
+        * block.  Should be quicker.
+        */
        for (i = first; i <= last; i++) {
+               uint8_t ftfx_fstat;
                /* set command and sector address */
-               w0 = (0x09 << 24) | bank->sectors[i].offset;
+               w0 = (0x09 << 24) | (bank->base + bank->sectors[i].offset);
 
-               result = kinetis_ftfl_command(bank, w0, w1, w2);
+               result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
 
                if (result != ERROR_OK) {
                        LOG_WARNING("erase sector %d failed", i);
@@ -263,44 +304,27 @@ static int kinetis_erase(struct flash_bank *bank, int first, int last)
 }
 
 static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
-       uint32_t offset, uint32_t count)
+                        uint32_t offset, uint32_t count)
 {
-       struct flash_bank *master_bank;
-       unsigned int i, result, fallback = 0, nvm = 0;
+       unsigned int i, result, fallback = 0;
        uint8_t buf[8];
        uint32_t wc, w0 = 0, w1 = 0, w2 = 0;
-       struct kinetis_flash_bank *kbank = (struct kinetis_flash_bank *)
-               bank->driver_priv;
+       struct kinetis_flash_bank *kinfo = bank->driver_priv;
 
        if (bank->target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       result = kinetis_get_master_bank(bank, &master_bank);
-
-       if (result != ERROR_OK)
-               return result;
-
-       if (offset >= kbank->nvm_start)
-               nvm = 1;
-
-       if (!nvm && (offset + count) > kbank->nvm_start) {
-               /* we could flash this in two goes, but if the segment
-                  spans across the pflash/nvm boundary, something is probably
-                  not right.
-               */
-               LOG_ERROR("Segment spans NVM boundary");
-               return ERROR_FLASH_DST_OUT_OF_BANK;
-       }
+       if (kinfo->flash_class == FC_FLEX_NVM) {
+               uint8_t ftfx_fstat;
 
-       if (nvm) {
-               LOG_DEBUG("flash write into NVM @%08X", offset);
+               LOG_DEBUG("flash write into FlexNVM @%08X", offset);
 
                /* make flex ram available */
                w0 = (0x81 << 24) | 0x00ff0000;
 
-               result = kinetis_ftfl_command(bank, w0, w1, w2);
+               result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
 
                if (result != ERROR_OK)
                        return ERROR_FLASH_OPERATION_FAILED;
@@ -316,7 +340,7 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
                        fallback = 1;
 
                        LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)",
-                               buf[0]);
+                                   buf[0]);
                }
        } else {
                LOG_DEBUG("flash write into PFLASH @08%X", offset);
@@ -325,21 +349,24 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
 
        /* program section command */
        if (fallback == 0) {
-               for (i = 0; i < count; i += (2 * 1024)) {
-                       wc = 512;
+               unsigned prog_section_bytes = kinfo->sector_size >> 8;
+               for (i = 0; i < count; i += kinfo->sector_size) {
+                       uint8_t ftfx_fstat;
 
-                       if ((count - i) < (2 * 1024)) {
+                       wc = kinfo->sector_size / 4;
+
+                       if ((count - i) < kinfo->sector_size) {
                                wc = count - i;
                                wc /= 4;
                        }
 
                        LOG_DEBUG("write section @ %08X with length %d",
-                               offset + i, wc * 4);
+                                 offset + i, wc * 4);
 
                        /* write data to flexram */
                        result =
                                target_write_memory(bank->target, 0x14000000, 4, wc,
-                                       buffer + i);
+                                                   buffer + i);
 
                        if (result != ERROR_OK) {
                                LOG_ERROR("target_write_memory failed");
@@ -348,201 +375,369 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
                        }
 
                        /* execute section command */
-                       w0 = (0x0b << 24) | (offset + i);
-                       w1 = (256 << 16);
+                       w0 = (0x0b << 24) | (bank->base + offset + i);
+                       w1 = ((wc * 4 / prog_section_bytes) << 16);
 
-                       result = kinetis_ftfl_command(bank, w0, w1, w2);
+                       result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
 
                        if (result != ERROR_OK)
                                return ERROR_FLASH_OPERATION_FAILED;
                }
        }
-       /* program longword command */
-       else {
+       /* program longword command, not supported in "SF3" devices */
+       else if (kinfo->granularity != 3) {
                for (i = 0; i < count; i += 4) {
+                       uint8_t ftfx_fstat;
+
                        LOG_DEBUG("write longword @ %08X", offset + i);
 
-                       w0 = (0x06 << 24) | (offset + i);
+                       w0 = (0x06 << 24) | (bank->base + offset + i);
                        w1 = buf_get_u32(buffer + offset + i, 0, 32);
 
-                       result = kinetis_ftfl_command(bank, w0, w1, w2);
+                       result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
 
                        if (result != ERROR_OK)
                                return ERROR_FLASH_OPERATION_FAILED;
                }
+       } else {
+               LOG_ERROR("Flash write strategy not implemented");
+               return ERROR_FLASH_OPERATION_FAILED;
        }
 
        return ERROR_OK;
 }
 
-static int kinetis_probe(struct flash_bank *bank)
+static int kinetis_read_part_info(struct flash_bank *bank)
 {
-       struct flash_bank *master_bank;
        int result, i;
        uint8_t buf[4];
-       uint32_t sim_sdid, sim_fcfg1, sim_fcfg2, offset = 0;
-       uint32_t nvm_size, pf_size, ee_size;
-
-       if (bank->target->state != TARGET_HALTED) {
-               LOG_ERROR("Target not halted");
-               return ERROR_TARGET_NOT_HALTED;
-       }
-
-       result = kinetis_get_master_bank(bank, &master_bank);
-
-       if (result != ERROR_OK)
-               return result;
+       uint32_t offset = 0;
+       uint8_t fcfg1_nvmsize, fcfg1_pfsize, fcfg1_eesize, fcfg2_pflsh;
+       uint32_t nvm_size = 0, pf_size = 0, ee_size = 0;
+       unsigned granularity, num_blocks = 0, num_pflash_blocks = 0, num_nvm_blocks = 0,
+               first_nvm_bank = 0, reassign = 0;
+       struct kinetis_flash_bank *kinfo = bank->driver_priv;
 
        result = target_read_memory(bank->target, 0x40048024, 1, 4, buf);
        if (result != ERROR_OK)
                return result;
-       sim_sdid = target_buffer_get_u32(bank->target, buf);
+       kinfo->sim_sdid = target_buffer_get_u32(bank->target, buf);
+       granularity = (kinfo->sim_sdid >> 7) & 0x03;
        result = target_read_memory(bank->target, 0x4004804c, 1, 4, buf);
        if (result != ERROR_OK)
                return result;
-       sim_fcfg1 = target_buffer_get_u32(bank->target, buf);
+       kinfo->sim_fcfg1 = target_buffer_get_u32(bank->target, buf);
        result = target_read_memory(bank->target, 0x40048050, 1, 4, buf);
        if (result != ERROR_OK)
                return result;
-       sim_fcfg2 = target_buffer_get_u32(bank->target, buf);
+       kinfo->sim_fcfg2 = target_buffer_get_u32(bank->target, buf);
+       fcfg2_pflsh = (kinfo->sim_fcfg2 >> 23) & 0x01;
 
-       LOG_DEBUG("SDID: %08X FCFG1: %08X FCFG2: %08X", sim_sdid, sim_fcfg1,
-               sim_fcfg2);
+       LOG_DEBUG("SDID: %08X FCFG1: %08X FCFG2: %08X", kinfo->sim_sdid,
+                 kinfo->sim_fcfg1, kinfo->sim_fcfg2);
 
-       switch ((sim_fcfg1 >> 28) & 0x0f) {
-               case 0x07:
-                       nvm_size = 128 * 1024;
-                       break;
-               case 0x09:
-               case 0x0f:
-                       nvm_size = 256 * 1024;
-                       break;
-               default:
-                       nvm_size = 0;
-                       break;
-       }
+       fcfg1_nvmsize = (uint8_t)((kinfo->sim_fcfg1 >> 28) & 0x0f);
+       fcfg1_pfsize = (uint8_t)((kinfo->sim_fcfg1 >> 24) & 0x0f);
+       fcfg1_eesize = (uint8_t)((kinfo->sim_fcfg1 >> 16) & 0x0f);
 
-       switch ((sim_fcfg1 >> 24) & 0x0f) {
+       /* when the PFLSH bit is set, there is no FlexNVM/FlexRAM */
+       if (!fcfg2_pflsh) {
+               switch (fcfg1_nvmsize) {
+               case 0x03:
                case 0x07:
-                       pf_size = 128 * 1024;
-                       break;
                case 0x09:
-                       pf_size = 256 * 1024;
-                       break;
                case 0x0b:
+                       nvm_size = 1 << (14 + (fcfg1_nvmsize >> 1));
+                       break;
                case 0x0f:
-                       pf_size = 512 * 1024;
+                       if (granularity == 3)
+                               nvm_size = 512<<10;
+                       else
+                               nvm_size = 256<<10;
                        break;
                default:
-                       pf_size = 0;
+                       nvm_size = 0;
                        break;
-       }
+               }
 
-       switch ((sim_fcfg1 >> 16) & 0x0f) {
+               switch (fcfg1_eesize) {
+               case 0x00:
+               case 0x01:
                case 0x02:
-                       ee_size = 4 * 1024;
-                       break;
                case 0x03:
-                       ee_size = 2 * 1024;
-                       break;
                case 0x04:
-                       ee_size = 1 * 1024;
-                       break;
                case 0x05:
-                       ee_size = 512;
-                       break;
                case 0x06:
-                       ee_size = 256;
-                       break;
                case 0x07:
-                       ee_size = 128;
-                       break;
                case 0x08:
-                       ee_size = 64;
-                       break;
                case 0x09:
-                       ee_size = 32;
+                       ee_size = (16 << (10 - fcfg1_eesize));
                        break;
                default:
                        ee_size = 0;
                        break;
+               }
        }
 
-       ((struct kinetis_flash_bank *) bank->driver_priv)->nvm_start =
-               pf_size - nvm_size;
+       switch (fcfg1_pfsize) {
+       case 0x03:
+       case 0x05:
+       case 0x07:
+       case 0x09:
+       case 0x0b:
+       case 0x0d:
+               pf_size = 1 << (14 + (fcfg1_pfsize >> 1));
+               break;
+       case 0x0f:
+               if (granularity == 3)
+                       pf_size = 1024<<10;
+               else if (fcfg2_pflsh)
+                       pf_size = 512<<10;
+               else
+                       pf_size = 256<<10;
+               break;
+       default:
+               pf_size = 0;
+               break;
+       }
+
+       LOG_DEBUG("FlexNVM: %d PFlash: %d FlexRAM: %d PFLSH: %d",
+                 nvm_size, pf_size, ee_size, fcfg2_pflsh);
+
+       num_blocks = kinetis_flash_params[granularity].num_blocks;
+       num_pflash_blocks = num_blocks / (2 - fcfg2_pflsh);
+       first_nvm_bank = num_pflash_blocks;
+       num_nvm_blocks = num_blocks - num_pflash_blocks;
+
+       LOG_DEBUG("%d blocks total: %d PFlash, %d FlexNVM",
+                 num_blocks, num_pflash_blocks, num_nvm_blocks);
+
+       /*
+        * If the flash class is already assigned, verify the
+        * parameters.
+        */
+       if (kinfo->flash_class != FC_AUTO) {
+               if (kinfo->bank_ordinal != (unsigned) bank->bank_number) {
+                       LOG_WARNING("Flash ordinal/bank number mismatch");
+                       reassign = 1;
+               } else if (kinfo->granularity != granularity) {
+                       LOG_WARNING("Flash granularity mismatch");
+                       reassign = 1;
+               } else {
+                       switch (kinfo->flash_class) {
+                       case FC_PFLASH:
+                               if (kinfo->bank_ordinal >= first_nvm_bank) {
+                                       LOG_WARNING("Class mismatch, bank %d is not PFlash",
+                                                   bank->bank_number);
+                                       reassign = 1;
+                               } else if (bank->size != (pf_size / num_pflash_blocks)) {
+                                       LOG_WARNING("PFlash size mismatch");
+                                       reassign = 1;
+                               } else if (bank->base !=
+                                        (0x00000000 + bank->size * kinfo->bank_ordinal)) {
+                                       LOG_WARNING("PFlash address range mismatch");
+                                       reassign = 1;
+                               } else if (kinfo->sector_size !=
+                                        kinetis_flash_params[granularity].pflash_sector_size_bytes) {
+                                       LOG_WARNING("PFlash sector size mismatch");
+                                       reassign = 1;
+                               } else {
+                                       LOG_DEBUG("PFlash bank %d already configured okay",
+                                                 kinfo->bank_ordinal);
+                               }
+                               break;
+                       case FC_FLEX_NVM:
+                               if ((kinfo->bank_ordinal >= num_blocks) ||
+                                   (kinfo->bank_ordinal < first_nvm_bank)) {
+                                       LOG_WARNING("Class mismatch, bank %d is not FlexNVM",
+                                                   bank->bank_number);
+                                       reassign = 1;
+                               } else if (bank->size != (nvm_size / num_nvm_blocks)) {
+                                       LOG_WARNING("FlexNVM size mismatch");
+                                       reassign = 1;
+                               } else if (bank->base !=
+                                        (0x10000000 + bank->size * kinfo->bank_ordinal)) {
+                                       LOG_WARNING("FlexNVM address range mismatch");
+                                       reassign = 1;
+                               } else if (kinfo->sector_size !=
+                                        kinetis_flash_params[granularity].nvm_sector_size_bytes) {
+                                       LOG_WARNING("FlexNVM sector size mismatch");
+                                       reassign = 1;
+                               } else {
+                                       LOG_DEBUG("FlexNVM bank %d already configured okay",
+                                                 kinfo->bank_ordinal);
+                               }
+                               break;
+                       case FC_FLEX_RAM:
+                               if (kinfo->bank_ordinal != num_blocks) {
+                                       LOG_WARNING("Class mismatch, bank %d is not FlexRAM",
+                                                   bank->bank_number);
+                                       reassign = 1;
+                               } else if (bank->size != ee_size) {
+                                       LOG_WARNING("FlexRAM size mismatch");
+                                       reassign = 1;
+                               } else if (bank->base != 0x14000000) {
+                                       LOG_WARNING("FlexRAM address mismatch");
+                                       reassign = 1;
+                               } else if (kinfo->sector_size !=
+                                        kinetis_flash_params[granularity].nvm_sector_size_bytes) {
+                                       LOG_WARNING("FlexRAM sector size mismatch");
+                                       reassign = 1;
+                               } else {
+                                       LOG_DEBUG("FlexRAM bank %d already configured okay",
+                                                 kinfo->bank_ordinal);
+                               }
+                       default:
+                               LOG_WARNING("Unknown or inconsistent flash class");
+                               reassign = 1;
+                               break;
+                       }
+               }
+       } else {
+               LOG_INFO("Probing flash info for bank %d", bank->bank_number);
+               reassign = 1;
+       }
 
-       LOG_DEBUG("NVM: %d PF: %d EE: %d BL1: %d", nvm_size, pf_size, ee_size,
-               (sim_fcfg2 >> 23) & 1);
+       if (!reassign)
+               return ERROR_OK;
+
+       kinfo->granularity = granularity;
+
+       if ((unsigned)bank->bank_number < num_pflash_blocks) {
+               /* pflash, banks start at address zero */
+               kinfo->flash_class = FC_PFLASH;
+               bank->size = (pf_size / num_pflash_blocks);
+               bank->base = 0x00000000 + bank->size * bank->bank_number;
+               kinfo->sector_size = kinetis_flash_params[granularity].pflash_sector_size_bytes;
+               kinfo->protection_size = pf_size / 32;
+       } else if ((unsigned)bank->bank_number < num_blocks) {
+               /* nvm, banks start at address 0x10000000 */
+               kinfo->flash_class = FC_FLEX_NVM;
+               bank->size = (nvm_size / num_nvm_blocks);
+               bank->base = 0x10000000 + bank->size * (bank->bank_number - first_nvm_bank);
+               kinfo->sector_size = kinetis_flash_params[granularity].nvm_sector_size_bytes;
+               kinfo->protection_size = 0; /* FIXME: TODO: depends on DEPART bits, chip */
+       } else if ((unsigned)bank->bank_number == num_blocks) {
+               LOG_ERROR("FlexRAM support not yet implemented");
+               return ERROR_FLASH_OPER_UNSUPPORTED;
+       } else {
+               LOG_ERROR("Cannot determine parameters for bank %d, only %d banks on device",
+                         bank->bank_number, num_blocks);
+               return ERROR_FLASH_BANK_INVALID;
+       }
 
-       if (pf_size != bank->size) {
-               LOG_WARNING("flash size is different %d != %d", pf_size,
-                       bank->size);
+       if (bank->sectors) {
+               free(bank->sectors);
+               bank->sectors = NULL;
        }
 
-       bank->num_sectors = bank->size / (2 * 1024);
+       bank->num_sectors = bank->size / kinfo->sector_size;
        assert(bank->num_sectors > 0);
        bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
 
        for (i = 0; i < bank->num_sectors; i++) {
                bank->sectors[i].offset = offset;
-               bank->sectors[i].size = 2 * 1024;
-               offset += bank->sectors[i].size;
+               bank->sectors[i].size = kinfo->sector_size;
+               offset += kinfo->sector_size;
                bank->sectors[i].is_erased = -1;
                bank->sectors[i].is_protected = 1;
        }
 
-       /* update the info we do not have */
-       return kinetis_update_bank_info(bank);
+       return ERROR_OK;
+}
+
+static int kinetis_probe(struct flash_bank *bank)
+{
+       if (bank->target->state != TARGET_HALTED) {
+               LOG_WARNING("Cannot communicate... target not halted.");
+               return ERROR_TARGET_NOT_HALTED;
+       }
+
+       return kinetis_read_part_info(bank);
 }
 
 static int kinetis_auto_probe(struct flash_bank *bank)
 {
+       struct kinetis_flash_bank *kinfo = bank->driver_priv;
+
+       if (kinfo->sim_sdid)
+               return ERROR_OK;
+
        return kinetis_probe(bank);
 }
 
 static int kinetis_info(struct flash_bank *bank, char *buf, int buf_size)
 {
-       int result;
-       struct flash_bank *master_bank;
-
-       result = kinetis_get_master_bank(bank, &master_bank);
+       const char *bank_class_names[] = {
+               "(ANY)", "PFlash", "FlexNVM", "FlexRAM"
+       };
 
-       if (result != ERROR_OK)
-               return result;
+       struct kinetis_flash_bank *kinfo = bank->driver_priv;
 
-       snprintf(buf, buf_size,
-               "%s driver for flash bank %s at 0x%8.8" PRIx32 "",
-               bank->driver->name, master_bank->name, master_bank->base);
+       (void) snprintf(buf, buf_size,
+                       "%s driver for %s flash bank %s at 0x%8.8" PRIx32 "",
+                       bank->driver->name, bank_class_names[kinfo->flash_class],
+                       bank->name, bank->base);
 
        return ERROR_OK;
 }
 
 static int kinetis_blank_check(struct flash_bank *bank)
 {
-       int result;
-       struct flash_bank *master_bank;
-
-       LOG_WARNING("kinetis_blank_check not supported yet");
+       struct kinetis_flash_bank *kinfo = bank->driver_priv;
 
        if (bank->target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       result = kinetis_get_master_bank(bank, &master_bank);
+       if (kinfo->flash_class == FC_PFLASH) {
+               int result;
+               uint32_t w0 = 0, w1 = 0, w2 = 0;
+               uint8_t ftfx_fstat;
 
-       if (result != ERROR_OK)
-               return result;
+               /* check if whole bank is blank */
+               w0 = (0x00 << 24) | bank->base;
+               w1 = 0; /* "normal margin" */
+
+               result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
+
+               if (result != ERROR_OK)
+                       return result;
+
+               if (ftfx_fstat & 0x01) {
+                       /* the whole bank is not erased, check sector-by-sector */
+                       int i;
+                       for (i = 0; i < bank->num_sectors; i++) {
+                               w0 = (0x01 << 24) | (bank->base + bank->sectors[i].offset);
+                               w1 = (0x100 << 16) | 0; /* normal margin */
+
+                               result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
+
+                               if (result == ERROR_OK) {
+                                       bank->sectors[i].is_erased = !(ftfx_fstat & 0x01);
+                               } else {
+                                       LOG_DEBUG("Ignoring errored PFlash sector blank-check");
+                                       bank->sectors[i].is_erased = -1;
+                               }
+                       }
+               } else {
+                       /* the whole bank is erased, update all sectors */
+                       int i;
+                       for (i = 0; i < bank->num_sectors; i++)
+                               bank->sectors[i].is_erased = 1;
+               }
+       } else {
+               LOG_WARNING("kinetis_blank_check not supported yet for FlexNVM");
+               return ERROR_FLASH_OPERATION_FAILED;
+       }
 
        return ERROR_OK;
 }
 
 static int kinetis_flash_read(struct flash_bank *bank,
-       uint8_t *buffer, uint32_t offset, uint32_t count)
+                             uint8_t *buffer, uint32_t offset, uint32_t count)
 {
-       int result;
-       struct flash_bank *master_bank;
-
        LOG_WARNING("kinetis_flash_read not supported yet");
 
        if (bank->target->state != TARGET_HALTED) {
@@ -550,12 +745,7 @@ static int kinetis_flash_read(struct flash_bank *bank,
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       result = kinetis_get_master_bank(bank, &master_bank);
-
-       if (result != ERROR_OK)
-               return result;
-
-       return ERROR_OK;
+       return ERROR_FLASH_OPERATION_FAILED;
 }
 
 struct flash_driver kinetis_flash = {
diff --git a/tcl/board/twr-k60f120m.cfg b/tcl/board/twr-k60f120m.cfg
new file mode 100644 (file)
index 0000000..119eb74
--- /dev/null
@@ -0,0 +1,17 @@
+#
+# Freescale TWRK60F120M development board
+#
+
+source [find target/k60.cfg]
+
+$_TARGETNAME configure -event reset-init {
+       puts "-event reset-init occured"
+}
+
+#
+# Bank definition for the 'program flash' (instructions and/or data)
+#
+flash bank pflash.0 kinetis 0x00000000 0x40000 0 4 $_TARGETNAME
+flash bank pflash.1 kinetis 0x00040000 0x40000 0 4 $_TARGETNAME
+flash bank pflash.2 kinetis 0x00080000 0x40000 0 4 $_TARGETNAME
+flash bank pflash.3 kinetis 0x000c0000 0x40000 0 4 $_TARGETNAME
index 4fe35bb0326f1126e2c3fdf7a6547f3746c1dff3..3b3b02f96abc3050da8faa955d86718242ab7914 100644 (file)
@@ -11,4 +11,5 @@ $_TARGETNAME configure -event reset-init {
 #
 # Bank definition for the 'program flash' (instructions and/or data)
 #
-flash bank pflash.pflash kinetis 0x00000000 0x80000 0 4 $_TARGETNAME
+flash bank pflash.0 kinetis 0x00000000 0x40000 0 4 $_TARGETNAME
+flash bank pflash.1 kinetis 0x00040000 0x40000 0 4 $_TARGETNAME