tcl/interface: Adapt config files to new sysfsgpio command syntax

Change-Id: I8e8dee6e8869d2853a7a73c8d4dc8b4891fb0389
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6403
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

diff --git a/tcl/board/novena-internal-fpga.cfg b/tcl/board/novena-internal-fpga.cfg
index 0e9ff5b1f6ad7e5248628691e5835f5e712dda87..780586223d082c1af658c5e7b65eca983cbf5451 100644 (file)
--- a/tcl/board/novena-internal-fpga.cfg
+++ b/tcl/board/novena-internal-fpga.cfg
@@ -19,6 +19,6 @@ adapter driver sysfsgpio
 transport select jtag
 
 # TCK TMS TDI TDO
-sysfsgpio_jtag_nums 136 139 137 138
+sysfsgpio jtag_nums 136 139 137 138
 
 source [find cpld/xilinx-xc6s.cfg]

diff --git a/tcl/interface/sysfsgpio-raspberrypi.cfg b/tcl/interface/sysfsgpio-raspberrypi.cfg
index ebb1502193d1d8b6280d25ab04d21a40f7e725be..0030560ca9cc562be4ab36e3bf4b448f0ef720fe 100644 (file)
--- a/tcl/interface/sysfsgpio-raspberrypi.cfg
+++ b/tcl/interface/sysfsgpio-raspberrypi.cfg
@@ -12,19 +12,19 @@ adapter driver sysfsgpio
 
 # Each of the JTAG lines need a gpio number set: tck tms tdi tdo
 # Header pin numbers: 23 22 19 21
-sysfsgpio_jtag_nums 11 25 10 9
+sysfsgpio jtag_nums 11 25 10 9
 
 # Each of the SWD lines need a gpio number set: swclk swdio
 # Header pin numbers: 23 22
-sysfsgpio_swd_nums 11 25
+sysfsgpio swd_nums 11 25
 
 # If you define trst or srst, use appropriate reset_config
 # Header pin numbers: TRST - 26, SRST - 18
 
-# sysfsgpio_trst_num 7
+# sysfsgpio trst_num 7
 # reset_config trst_only
 
-# sysfsgpio_srst_num 24
+# sysfsgpio srst_num 24
 # reset_config srst_only srst_push_pull
 
 # or if you have both connected,