#ifdef CYGPKG_PROFILE_GPROF
- register_command(cmd_ctx, NULL, "ecosboard_profile", eCosBoard_handle_eCosBoard_profile_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "ecosboard_profile", eCosBoard_handle_eCosBoard_profile_command,
COMMAND_ANY, NULL);
#endif
if (!sam3_registered) {
sam3_registered++;
- pCmd = register_command(cmd_ctx, NULL, "at91sam3", NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, pCmd,
+ pCmd = COMMAND_REGISTER(cmd_ctx, NULL, "at91sam3", NULL, COMMAND_ANY, NULL);
+ COMMAND_REGISTER(cmd_ctx, pCmd,
"gpnvm",
sam3_handle_gpnvm_command,
COMMAND_EXEC,
"at91sam3 gpnvm [action [<BIT>], by default 'show', otherwise set | clear BIT");
- register_command(cmd_ctx, pCmd,
+ COMMAND_REGISTER(cmd_ctx, pCmd,
"info",
sam3_handle_info_command,
COMMAND_EXEC,
"at91sam3 info - print information about the current sam3 chip");
- register_command(cmd_ctx, pCmd,
+ COMMAND_REGISTER(cmd_ctx, pCmd,
"slowclk",
sam3_handle_slowclk_command,
COMMAND_EXEC,
static int at91sam7_register_commands(struct command_context *cmd_ctx)
{
- struct command *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7",
+ struct command *at91sam7_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "at91sam7",
NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, at91sam7_cmd, "gpnvm",
+ COMMAND_REGISTER(cmd_ctx, at91sam7_cmd, "gpnvm",
at91sam7_handle_gpnvm_command, COMMAND_EXEC,
"at91sam7 gpnvm <bit> set | clear, "
"set or clear one gpnvm bit");
static int avrf_register_commands(struct command_context *cmd_ctx)
{
- struct command *avr_cmd = register_command(cmd_ctx, NULL, "avr",
+ struct command *avr_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "avr",
NULL, COMMAND_ANY, "avr flash specific commands");
- register_command(cmd_ctx, avr_cmd, "mass_erase",
+ COMMAND_REGISTER(cmd_ctx, avr_cmd, "mass_erase",
avrf_handle_mass_erase_command, COMMAND_EXEC,
"mass erase device");
static int cfi_register_commands(struct command_context *cmd_ctx)
{
/*struct command *cfi_cmd = */
- register_command(cmd_ctx, NULL, "cfi", NULL, COMMAND_ANY, "flash bank cfi <base> <size> <chip_width> <bus_width> <targetNum> [jedec_probe/x16_as_x8]");
+ COMMAND_REGISTER(cmd_ctx, NULL, "cfi", NULL, COMMAND_ANY, "flash bank cfi <base> <size> <chip_width> <bus_width> <targetNum> [jedec_probe/x16_as_x8]");
/*
- register_command(cmd_ctx, cfi_cmd, "part_id", cfi_handle_part_id_command, COMMAND_EXEC,
+ COMMAND_REGISTER(cmd_ctx, cfi_cmd, "part_id", cfi_handle_part_id_command, COMMAND_EXEC,
"print part id of cfi flash bank <num>");
*/
return ERROR_OK;
static int ecosflash_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "ecosflash", NULL, COMMAND_ANY, NULL);
+ COMMAND_REGISTER(cmd_ctx, NULL, "ecosflash", NULL, COMMAND_ANY, NULL);
return ERROR_OK;
}
if (!flash_banks)
return ERROR_OK;
- register_command(cmd_ctx, flash_cmd, "info",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "info",
handle_flash_info_command, COMMAND_EXEC,
"print info about flash bank <num>");
- register_command(cmd_ctx, flash_cmd, "probe",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "probe",
handle_flash_probe_command, COMMAND_EXEC,
"identify flash bank <num>");
- register_command(cmd_ctx, flash_cmd, "erase_check",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "erase_check",
handle_flash_erase_check_command, COMMAND_EXEC,
"check erase state of sectors in flash bank <num>");
- register_command(cmd_ctx, flash_cmd, "protect_check",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "protect_check",
handle_flash_protect_check_command, COMMAND_EXEC,
"check protection state of sectors in flash bank <num>");
- register_command(cmd_ctx, flash_cmd, "erase_sector",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "erase_sector",
handle_flash_erase_command, COMMAND_EXEC,
"erase sectors at <bank> <first> <last>");
- register_command(cmd_ctx, flash_cmd, "erase_address",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "erase_address",
handle_flash_erase_address_command, COMMAND_EXEC,
"erase address range <address> <length>");
- register_command(cmd_ctx, flash_cmd, "fillw",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "fillw",
handle_flash_fill_command, COMMAND_EXEC,
"fill with pattern (no autoerase) <address> <word_pattern> <count>");
- register_command(cmd_ctx, flash_cmd, "fillh",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "fillh",
handle_flash_fill_command, COMMAND_EXEC,
"fill with pattern <address> <halfword_pattern> <count>");
- register_command(cmd_ctx, flash_cmd, "fillb",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "fillb",
handle_flash_fill_command, COMMAND_EXEC,
"fill with pattern <address> <byte_pattern> <count>");
- register_command(cmd_ctx, flash_cmd, "write_bank",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "write_bank",
handle_flash_write_bank_command, COMMAND_EXEC,
"write binary data to <bank> <file> <offset>");
- register_command(cmd_ctx, flash_cmd, "write_image",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "write_image",
handle_flash_write_image_command, COMMAND_EXEC,
"write_image [erase] [unlock] <file> [offset] [type]");
- register_command(cmd_ctx, flash_cmd, "protect",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "protect",
handle_flash_protect_command, COMMAND_EXEC,
"set protection of sectors at <bank> <first> <last> <on | off>");
int flash_register_commands(struct command_context *cmd_ctx)
{
- flash_cmd = register_command(cmd_ctx, NULL, "flash",
+ flash_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "flash",
NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, flash_cmd, "bank",
+ COMMAND_REGISTER(cmd_ctx, flash_cmd, "bank",
handle_flash_bank_command, COMMAND_CONFIG,
"flash bank <driver> <base> <size> "
"<chip_width> <bus_width> <target> [driver_options ...]");
static int lpc2000_register_commands(struct command_context *cmd_ctx)
{
- struct command *lpc2000_cmd = register_command(cmd_ctx, NULL, "lpc2000",
+ struct command *lpc2000_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "lpc2000",
NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, lpc2000_cmd, "part_id",
+ COMMAND_REGISTER(cmd_ctx, lpc2000_cmd, "part_id",
lpc2000_handle_part_id_command, COMMAND_EXEC,
"print part id of lpc2000 flash bank <num>");
*/
static int lpc2900_register_commands(struct command_context *cmd_ctx)
{
- struct command *lpc2900_cmd = register_command(cmd_ctx, NULL, "lpc2900",
+ struct command *lpc2900_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "lpc2900",
NULL, COMMAND_ANY, NULL);
- register_command(
- cmd_ctx,
- lpc2900_cmd,
- "signature",
- lpc2900_handle_signature_command,
- COMMAND_EXEC,
+ COMMAND_REGISTER(cmd_ctx, lpc2900_cmd, "signature",
+ &lpc2900_handle_signature_command, COMMAND_EXEC,
"<bank> | "
- "print device signature of flash bank");
-
- register_command(
- cmd_ctx,
- lpc2900_cmd,
- "read_custom",
- lpc2900_handle_read_custom_command,
- COMMAND_EXEC,
+ "print device signature of flash bank");
+
+ COMMAND_REGISTER(cmd_ctx, lpc2900_cmd, "read_custom",
+ &lpc2900_handle_read_custom_command, COMMAND_EXEC,
"<bank> <filename> | "
"read customer information from index sector to file");
- register_command(
- cmd_ctx,
- lpc2900_cmd,
- "password",
- lpc2900_handle_password_command,
- COMMAND_EXEC,
+ COMMAND_REGISTER(cmd_ctx, lpc2900_cmd, "password",
+ &lpc2900_handle_password_command, COMMAND_EXEC,
"<bank> <password> | "
"enter password to enable 'dangerous' options");
- register_command(
- cmd_ctx,
- lpc2900_cmd,
- "write_custom",
- lpc2900_handle_write_custom_command,
- COMMAND_EXEC,
+ COMMAND_REGISTER(cmd_ctx, lpc2900_cmd, "write_custom",
+ &lpc2900_handle_write_custom_command, COMMAND_EXEC,
"<bank> <filename> [<type>] | "
"write customer info from file to index sector");
- register_command(
- cmd_ctx,
- lpc2900_cmd,
- "secure_sector",
- lpc2900_handle_secure_sector_command,
- COMMAND_EXEC,
+ COMMAND_REGISTER(cmd_ctx, lpc2900_cmd, "secure_sector",
+ &lpc2900_handle_secure_sector_command, COMMAND_EXEC,
"<bank> <first> <last> | "
"activate sector security for a range of sectors");
- register_command(
- cmd_ctx,
- lpc2900_cmd,
- "secure_jtag",
- lpc2900_handle_secure_jtag_command,
- COMMAND_EXEC,
+ COMMAND_REGISTER(cmd_ctx, lpc2900_cmd, "secure_jtag",
+ &lpc2900_handle_secure_jtag_command, COMMAND_EXEC,
"<bank> <level> | "
"activate JTAG security");
static int lpc3180_register_commands(struct command_context *cmd_ctx)
{
- struct command *lpc3180_cmd = register_command(cmd_ctx, NULL, "lpc3180", NULL, COMMAND_ANY, "commands specific to the LPC3180 NAND flash controllers");
+ struct command *lpc3180_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "lpc3180", NULL, COMMAND_ANY, "commands specific to the LPC3180 NAND flash controllers");
- register_command(cmd_ctx, lpc3180_cmd, "select", handle_lpc3180_select_command, COMMAND_EXEC, "select <'mlc'|'slc'> controller (default is mlc)");
+ COMMAND_REGISTER(cmd_ctx, lpc3180_cmd, "select", handle_lpc3180_select_command, COMMAND_EXEC, "select <'mlc'|'slc'> controller (default is mlc)");
return ERROR_OK;
}
int mflash_init_drivers(struct command_context *cmd_ctx)
{
if (mflash_bank) {
- register_command(cmd_ctx, mflash_cmd, "probe", mg_probe_cmd, COMMAND_EXEC, NULL);
- register_command(cmd_ctx, mflash_cmd, "write", mg_write_cmd, COMMAND_EXEC,
+ COMMAND_REGISTER(cmd_ctx, mflash_cmd, "probe", mg_probe_cmd, COMMAND_EXEC, NULL);
+ COMMAND_REGISTER(cmd_ctx, mflash_cmd, "write", mg_write_cmd, COMMAND_EXEC,
"mflash write <num> <file> <address>");
- register_command(cmd_ctx, mflash_cmd, "dump", mg_dump_cmd, COMMAND_EXEC,
+ COMMAND_REGISTER(cmd_ctx, mflash_cmd, "dump", mg_dump_cmd, COMMAND_EXEC,
"mflash dump <num> <file> <address> <size>");
- register_command(cmd_ctx, mflash_cmd, "config", mg_config_cmd,
+ COMMAND_REGISTER(cmd_ctx, mflash_cmd, "config", mg_config_cmd,
COMMAND_EXEC, "mflash config <num> <stage>");
}
int mflash_register_commands(struct command_context *cmd_ctx)
{
- mflash_cmd = register_command(cmd_ctx, NULL, "mflash", NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, mflash_cmd, "bank", mg_bank_cmd, COMMAND_CONFIG,
+ mflash_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "mflash", NULL, COMMAND_ANY, NULL);
+ COMMAND_REGISTER(cmd_ctx, mflash_cmd, "bank", mg_bank_cmd, COMMAND_CONFIG,
"mflash bank <soc> <base> <RST pin> <target #>");
return ERROR_OK;
}
int nand_register_commands(struct command_context *cmd_ctx)
{
- nand_cmd = register_command(cmd_ctx, NULL, "nand",
+ nand_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "nand",
NULL, COMMAND_ANY, "NAND specific commands");
- register_command(cmd_ctx, nand_cmd, "device",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "device",
&handle_nand_device_command, COMMAND_CONFIG,
"defines a new NAND bank");
- register_command(cmd_ctx, nand_cmd, "drivers",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "drivers",
&handle_nand_list_drivers, COMMAND_ANY,
"lists available NAND drivers");
if (!nand_devices)
return ERROR_OK;
- register_command(cmd_ctx, nand_cmd, "list",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "list",
handle_nand_list_command, COMMAND_EXEC,
"list configured NAND flash devices");
- register_command(cmd_ctx, nand_cmd, "info",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "info",
handle_nand_info_command, COMMAND_EXEC,
"print info about NAND flash device <num>");
- register_command(cmd_ctx, nand_cmd, "probe",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "probe",
handle_nand_probe_command, COMMAND_EXEC,
"identify NAND flash device <num>");
- register_command(cmd_ctx, nand_cmd, "check_bad_blocks",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "check_bad_blocks",
handle_nand_check_bad_blocks_command, COMMAND_EXEC,
"check NAND flash device <num> for bad blocks [<offset> <length>]");
- register_command(cmd_ctx, nand_cmd, "erase",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "erase",
handle_nand_erase_command, COMMAND_EXEC,
"erase blocks on NAND flash device <num> [<offset> <length>]");
- register_command(cmd_ctx, nand_cmd, "dump",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "dump",
handle_nand_dump_command, COMMAND_EXEC,
"dump from NAND flash device <num> <filename> "
"<offset> <length> [oob_raw | oob_only]");
- register_command(cmd_ctx, nand_cmd, "verify",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "verify",
&handle_nand_verify_command, COMMAND_EXEC,
"verify NAND flash device <num> <filename> <offset> "
"[oob_raw | oob_only | oob_softecc | oob_softecc_kw]");
- register_command(cmd_ctx, nand_cmd, "write",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "write",
handle_nand_write_command, COMMAND_EXEC,
"write to NAND flash device <num> <filename> <offset> "
"[oob_raw | oob_only | oob_softecc | oob_softecc_kw]");
- register_command(cmd_ctx, nand_cmd, "raw_access",
+ COMMAND_REGISTER(cmd_ctx, nand_cmd, "raw_access",
handle_nand_raw_access_command, COMMAND_EXEC,
"raw access to NAND flash device <num> ['enable'|'disable']");
static int pic32mx_register_commands(struct command_context *cmd_ctx)
{
- struct command *pic32mx_cmd = register_command(cmd_ctx, NULL, "pic32mx",
+ struct command *pic32mx_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "pic32mx",
NULL, COMMAND_ANY, "pic32mx flash specific commands");
#if 0
- register_command(cmd_ctx, pic32mx_cmd, "lock",
+ COMMAND_REGISTER(cmd_ctx, pic32mx_cmd, "lock",
pic32mx_handle_lock_command, COMMAND_EXEC,
"lock device");
- register_command(cmd_ctx, pic32mx_cmd, "unlock",
+ COMMAND_REGISTER(cmd_ctx, pic32mx_cmd, "unlock",
pic32mx_handle_unlock_command, COMMAND_EXEC,
"unlock protected device");
#endif
- register_command(cmd_ctx, pic32mx_cmd, "chip_erase",
+ COMMAND_REGISTER(cmd_ctx, pic32mx_cmd, "chip_erase",
pic32mx_handle_chip_erase_command, COMMAND_EXEC,
"erase device");
- register_command(cmd_ctx, pic32mx_cmd, "pgm_word",
+ COMMAND_REGISTER(cmd_ctx, pic32mx_cmd, "pgm_word",
pic32mx_handle_pgm_word_command, COMMAND_EXEC,
"program a word");
return ERROR_OK;
static int stellaris_register_commands(struct command_context *cmd_ctx)
{
- struct command *stm32x_cmd = register_command(cmd_ctx, NULL, "stellaris",
+ struct command *stm32x_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "stellaris",
NULL, COMMAND_ANY, "stellaris flash specific commands");
- register_command(cmd_ctx, stm32x_cmd, "mass_erase",
+ COMMAND_REGISTER(cmd_ctx, stm32x_cmd, "mass_erase",
stellaris_handle_mass_erase_command, COMMAND_EXEC,
"mass erase device");
return ERROR_OK;
static int stm32x_register_commands(struct command_context *cmd_ctx)
{
- struct command *stm32x_cmd = register_command(cmd_ctx, NULL, "stm32x",
+ struct command *stm32x_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "stm32x",
NULL, COMMAND_ANY, "stm32x flash specific commands");
- register_command(cmd_ctx, stm32x_cmd, "lock",
+ COMMAND_REGISTER(cmd_ctx, stm32x_cmd, "lock",
stm32x_handle_lock_command, COMMAND_EXEC,
"lock device");
- register_command(cmd_ctx, stm32x_cmd, "unlock",
+ COMMAND_REGISTER(cmd_ctx, stm32x_cmd, "unlock",
stm32x_handle_unlock_command, COMMAND_EXEC,
"unlock protected device");
- register_command(cmd_ctx, stm32x_cmd, "mass_erase",
+ COMMAND_REGISTER(cmd_ctx, stm32x_cmd, "mass_erase",
stm32x_handle_mass_erase_command, COMMAND_EXEC,
"mass erase device");
- register_command(cmd_ctx, stm32x_cmd, "options_read",
+ COMMAND_REGISTER(cmd_ctx, stm32x_cmd, "options_read",
stm32x_handle_options_read_command, COMMAND_EXEC,
"read device option bytes");
- register_command(cmd_ctx, stm32x_cmd, "options_write",
+ COMMAND_REGISTER(cmd_ctx, stm32x_cmd, "options_write",
stm32x_handle_options_write_command, COMMAND_EXEC,
"write device option bytes");
static int str7x_register_commands(struct command_context *cmd_ctx)
{
- struct command *str7x_cmd = register_command(cmd_ctx, NULL, "str7x",
+ struct command *str7x_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "str7x",
NULL, COMMAND_ANY, "str7x flash specific commands");
- register_command(cmd_ctx, str7x_cmd, "disable_jtag",
+ COMMAND_REGISTER(cmd_ctx, str7x_cmd, "disable_jtag",
str7x_handle_disable_jtag_command, COMMAND_EXEC,
"disable jtag access");
static int str9x_register_commands(struct command_context *cmd_ctx)
{
- struct command *str9x_cmd = register_command(cmd_ctx, NULL, "str9x",
+ struct command *str9x_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "str9x",
NULL, COMMAND_ANY, "str9x flash commands");
- register_command(cmd_ctx, str9x_cmd, "flash_config",
+ COMMAND_REGISTER(cmd_ctx, str9x_cmd, "flash_config",
str9x_handle_flash_config_command, COMMAND_EXEC,
"configure str9 flash controller");
static int str9xpec_register_commands(struct command_context *cmd_ctx)
{
- struct command *str9xpec_cmd = register_command(cmd_ctx, NULL, "str9xpec",
+ struct command *str9xpec_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "str9xpec",
NULL, COMMAND_ANY, "str9xpec flash specific commands");
- register_command(cmd_ctx, str9xpec_cmd, "enable_turbo",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "enable_turbo",
str9xpec_handle_flash_enable_turbo_command,
COMMAND_EXEC, "enable str9xpec turbo mode");
- register_command(cmd_ctx, str9xpec_cmd, "disable_turbo",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "disable_turbo",
str9xpec_handle_flash_disable_turbo_command,
COMMAND_EXEC, "disable str9xpec turbo mode");
- register_command(cmd_ctx, str9xpec_cmd, "options_cmap",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "options_cmap",
str9xpec_handle_flash_options_cmap_command,
COMMAND_EXEC, "configure str9xpec boot sector");
- register_command(cmd_ctx, str9xpec_cmd, "options_lvdthd",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "options_lvdthd",
str9xpec_handle_flash_options_lvdthd_command,
COMMAND_EXEC, "configure str9xpec lvd threshold");
- register_command(cmd_ctx, str9xpec_cmd, "options_lvdsel",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "options_lvdsel",
str9xpec_handle_flash_options_lvdsel_command,
COMMAND_EXEC, "configure str9xpec lvd selection");
- register_command(cmd_ctx, str9xpec_cmd, "options_lvdwarn",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "options_lvdwarn",
str9xpec_handle_flash_options_lvdwarn_command,
COMMAND_EXEC, "configure str9xpec lvd warning");
- register_command(cmd_ctx, str9xpec_cmd, "options_read",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "options_read",
str9xpec_handle_flash_options_read_command,
COMMAND_EXEC, "read str9xpec options");
- register_command(cmd_ctx, str9xpec_cmd, "options_write",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "options_write",
str9xpec_handle_flash_options_write_command,
COMMAND_EXEC, "write str9xpec options");
- register_command(cmd_ctx, str9xpec_cmd, "lock",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "lock",
str9xpec_handle_flash_lock_command,
COMMAND_EXEC, "lock str9xpec device");
- register_command(cmd_ctx, str9xpec_cmd, "unlock",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "unlock",
str9xpec_handle_flash_unlock_command,
COMMAND_EXEC, "unlock str9xpec device");
- register_command(cmd_ctx, str9xpec_cmd, "part_id",
+ COMMAND_REGISTER(cmd_ctx, str9xpec_cmd, "part_id",
str9xpec_handle_part_id_command,
COMMAND_EXEC, "print part id of str9xpec flash bank <num>");
static int tms470_register_commands(struct command_context *cmd_ctx)
{
- struct command *tms470_cmd = register_command(cmd_ctx, NULL, "tms470", NULL, COMMAND_ANY, "applies to TI tms470 family");
+ struct command *tms470_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "tms470", NULL, COMMAND_ANY, "applies to TI tms470 family");
- register_command(cmd_ctx, tms470_cmd, "flash_keyset", tms470_handle_flash_keyset_command, COMMAND_ANY, "tms470 flash_keyset <key0> <key1> <key2> <key3>");
- register_command(cmd_ctx, tms470_cmd, "osc_megahertz", tms470_handle_osc_megahertz_command, COMMAND_ANY, "tms470 osc_megahertz <MHz>");
- register_command(cmd_ctx, tms470_cmd, "plldis", tms470_handle_plldis_command, COMMAND_ANY, "tms470 plldis <0/1>");
+ COMMAND_REGISTER(cmd_ctx, tms470_cmd, "flash_keyset", tms470_handle_flash_keyset_command, COMMAND_ANY, "tms470 flash_keyset <key0> <key1> <key2> <key3>");
+ COMMAND_REGISTER(cmd_ctx, tms470_cmd, "osc_megahertz", tms470_handle_osc_megahertz_command, COMMAND_ANY, "tms470 osc_megahertz <MHz>");
+ COMMAND_REGISTER(cmd_ctx, tms470_cmd, "plldis", tms470_handle_plldis_command, COMMAND_ANY, "tms470 plldis <0/1>");
return ERROR_OK;
}
int foo_register_commands(struct command_context *cmd_ctx)
{
// register several commands under the foo command
- struct command *cmd = register_command(cmd_ctx, NULL, "foo",
+ struct command *cmd = COMMAND_REGISTER(cmd_ctx, NULL, "foo",
NULL, COMMAND_ANY, "foo: command handler skeleton");
- register_command(cmd_ctx, cmd, "bar",
+ COMMAND_REGISTER(cmd_ctx, cmd, "bar",
&handle_foo_command, COMMAND_ANY,
"<address> [enable|disable] - an example command");
- register_command(cmd_ctx, cmd, "baz",
+ COMMAND_REGISTER(cmd_ctx, cmd, "baz",
&handle_foo_command, COMMAND_ANY,
"<address> [enable|disable] - a sample command");
- register_command(cmd_ctx, cmd, "flag",
+ COMMAND_REGISTER(cmd_ctx, cmd, "flag",
&handle_flag_command, COMMAND_ANY,
"[on|off] - set a flag");
{
foo_register_commands(cmd_ctx);
- struct command *cmd = register_command(cmd_ctx, NULL, "hello",
+ struct command *cmd = COMMAND_REGISTER(cmd_ctx, NULL, "hello",
&handle_hello_command, COMMAND_ANY,
"[<name>] - prints a warm welcome");
return cmd ? ERROR_OK : -ENOMEM;
interp->cb_fflush = openocd_jim_fflush;
interp->cb_fgets = openocd_jim_fgets;
- register_command(context, NULL, "add_help_text",
+ COMMAND_REGISTER(context, NULL, "add_help_text",
handle_help_add_command, COMMAND_ANY,
"<command> [...] <help_text>] - "
"add new command help text");
}
Jim_DeleteAssocData(interp, "context");
- register_command(context, NULL, "sleep",
+ COMMAND_REGISTER(context, NULL, "sleep",
handle_sleep_command, COMMAND_ANY,
"<n> [busy] - sleep for n milliseconds. "
"\"busy\" means busy wait");
- register_command(context, NULL, "help",
+ COMMAND_REGISTER(context, NULL, "help",
&handle_help_command, COMMAND_ANY,
"[<command_name> ...] - show built-in command help");
int ioutil_init(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "rm", handle_rm_command, COMMAND_ANY,
+ COMMAND_REGISTER(cmd_ctx, NULL, "rm", handle_rm_command, COMMAND_ANY,
"remove file");
- register_command(cmd_ctx, NULL, "cat", handle_cat_command, COMMAND_ANY,
+ COMMAND_REGISTER(cmd_ctx, NULL, "cat", handle_cat_command, COMMAND_ANY,
"display file content");
- register_command(cmd_ctx, NULL, "trunc", handle_trunc_command, COMMAND_ANY,
+ COMMAND_REGISTER(cmd_ctx, NULL, "trunc", handle_trunc_command, COMMAND_ANY,
"truncate a file to 0 size");
- register_command(cmd_ctx, NULL, "cp", handle_cp_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "cp", handle_cp_command,
COMMAND_ANY, "copy a file <from> <to>");
- register_command(cmd_ctx, NULL, "append_file", handle_append_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "append_file", handle_append_command,
COMMAND_ANY, "append a variable number of strings to a file");
- register_command(cmd_ctx, NULL, "meminfo", handle_meminfo_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "meminfo", handle_meminfo_command,
COMMAND_ANY, "display available ram memory");
Jim_CreateCommand(interp, "rm", zylinjtag_Jim_Command_rm, NULL, NULL);
int log_register_commands(struct command_context *cmd_ctx)
{
start = timeval_ms();
- register_command(cmd_ctx, NULL, "log_output", handle_log_output_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "log_output", handle_log_output_command,
COMMAND_ANY, "redirect logging to <file> (default: stderr)");
- register_command(cmd_ctx, NULL, "debug_level", handle_debug_level_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "debug_level", handle_debug_level_command,
COMMAND_ANY, "adjust debug level <0-3>");
return ERROR_OK;
static int amt_jtagaccel_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "parport_port",
+ COMMAND_REGISTER(cmd_ctx, NULL, "parport_port",
amt_jtagaccel_handle_parport_port_command, COMMAND_CONFIG,
NULL);
- register_command(cmd_ctx, NULL, "rtck",
+ COMMAND_REGISTER(cmd_ctx, NULL, "rtck",
amt_jtagaccel_handle_rtck_command, COMMAND_CONFIG,
NULL);
static int armjtagew_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "armjtagew_info",
+ COMMAND_REGISTER(cmd_ctx, NULL, "armjtagew_info",
&armjtagew_handle_armjtagew_info_command, COMMAND_EXEC,
"query armjtagew info");
return ERROR_OK;
static int at91rm9200_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "at91rm9200_device", at91rm9200_handle_device_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "at91rm9200_device", at91rm9200_handle_device_command,
COMMAND_CONFIG, NULL);
return ERROR_OK;
}
static int ft2232_register_commands(struct command_context* cmd_ctx)
{
- register_command(cmd_ctx, NULL, "ft2232_device_desc",
+ COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_device_desc",
ft2232_handle_device_desc_command, COMMAND_CONFIG,
"the USB device description of the FTDI FT2232 device");
- register_command(cmd_ctx, NULL, "ft2232_serial",
+ COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_serial",
ft2232_handle_serial_command, COMMAND_CONFIG,
"the serial number of the FTDI FT2232 device");
- register_command(cmd_ctx, NULL, "ft2232_layout",
+ COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_layout",
ft2232_handle_layout_command, COMMAND_CONFIG,
"the layout of the FT2232 GPIO signals used "
"to control output-enables and reset signals");
- register_command(cmd_ctx, NULL, "ft2232_vid_pid",
+ COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_vid_pid",
ft2232_handle_vid_pid_command, COMMAND_CONFIG,
"the vendor ID and product ID of the FTDI FT2232 device");
- register_command(cmd_ctx, NULL, "ft2232_latency",
+ COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_latency",
ft2232_handle_latency_command, COMMAND_CONFIG,
"set the FT2232 latency timer to a new value");
static int gw16012_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "parport_port",
+ COMMAND_REGISTER(cmd_ctx, NULL, "parport_port",
gw16012_handle_parport_port_command, COMMAND_CONFIG,
NULL);
static int jlink_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "jlink_info",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jlink_info",
&jlink_handle_jlink_info_command, COMMAND_EXEC,
"query jlink info");
- register_command(cmd_ctx, NULL, "jlink_hw_jtag",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jlink_hw_jtag",
&jlink_handle_jlink_hw_jtag_command, COMMAND_EXEC,
"set/get jlink hw jtag command version [2 | 3]");
return ERROR_OK;
static int parport_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "parport_port",
+ COMMAND_REGISTER(cmd_ctx, NULL, "parport_port",
parport_handle_parport_port_command, COMMAND_CONFIG,
"either the address of the I/O port "
"or the number of the '/dev/parport' device");
- register_command(cmd_ctx, NULL, "parport_cable",
+ COMMAND_REGISTER(cmd_ctx, NULL, "parport_cable",
parport_handle_parport_cable_command, COMMAND_CONFIG,
"the layout of the parallel port cable "
"used to connect to the target");
- register_command(cmd_ctx, NULL, "parport_write_on_exit",
+ COMMAND_REGISTER(cmd_ctx, NULL, "parport_write_on_exit",
parport_handle_write_on_exit_command, COMMAND_CONFIG,
"configure the parallel driver to write "
"a known value to the parallel interface");
- register_command(cmd_ctx, NULL, "parport_toggling_time",
+ COMMAND_REGISTER(cmd_ctx, NULL, "parport_toggling_time",
parport_handle_parport_toggling_time_command, COMMAND_ANY,
"time <ns> it takes for the hardware to toggle TCK");
static int presto_jtag_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "presto_serial", presto_handle_serial_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "presto_serial", presto_handle_serial_command,
COMMAND_CONFIG, NULL);
return ERROR_OK;
}
register_jim(cmd_ctx, "jtag", jim_jtag_command,
"perform jtag tap actions");
- register_command(cmd_ctx, NULL, "interface",
+ COMMAND_REGISTER(cmd_ctx, NULL, "interface",
handle_interface_command, COMMAND_CONFIG,
"try to configure interface");
- register_command(cmd_ctx, NULL, "interface_list",
+ COMMAND_REGISTER(cmd_ctx, NULL, "interface_list",
&handle_interface_list_command, COMMAND_ANY,
"list all built-in interfaces");
- register_command(cmd_ctx, NULL, "jtag_khz",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jtag_khz",
handle_jtag_khz_command, COMMAND_ANY,
"set maximum jtag speed (if supported); "
"parameter is maximum khz, or 0 for adaptive clocking (RTCK).");
- register_command(cmd_ctx, NULL, "jtag_rclk",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jtag_rclk",
handle_jtag_rclk_command, COMMAND_ANY,
"fallback_speed_khz - set JTAG speed to RCLK or use fallback speed");
- register_command(cmd_ctx, NULL, "reset_config",
+ COMMAND_REGISTER(cmd_ctx, NULL, "reset_config",
handle_reset_config_command, COMMAND_ANY,
"reset_config "
"[none|trst_only|srst_only|trst_and_srst] "
"[trst_push_pull|trst_open_drain] "
"[srst_push_pull|srst_open_drain]");
- register_command(cmd_ctx, NULL, "jtag_nsrst_delay",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jtag_nsrst_delay",
handle_jtag_nsrst_delay_command, COMMAND_ANY,
"jtag_nsrst_delay <ms> "
"- delay after deasserting srst in ms");
- register_command(cmd_ctx, NULL, "jtag_ntrst_delay",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jtag_ntrst_delay",
handle_jtag_ntrst_delay_command, COMMAND_ANY,
"jtag_ntrst_delay <ms> "
"- delay after deasserting trst in ms");
- register_command(cmd_ctx, NULL, "jtag_nsrst_assert_width",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jtag_nsrst_assert_width",
handle_jtag_nsrst_assert_width_command, COMMAND_ANY,
"jtag_nsrst_assert_width <ms> "
"- delay after asserting srst in ms");
- register_command(cmd_ctx, NULL, "jtag_ntrst_assert_width",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jtag_ntrst_assert_width",
handle_jtag_ntrst_assert_width_command, COMMAND_ANY,
"jtag_ntrst_assert_width <ms> "
"- delay after asserting trst in ms");
- register_command(cmd_ctx, NULL, "scan_chain",
+ COMMAND_REGISTER(cmd_ctx, NULL, "scan_chain",
handle_scan_chain_command, COMMAND_EXEC,
"print current scan chain configuration");
- register_command(cmd_ctx, NULL, "jtag_reset",
+ COMMAND_REGISTER(cmd_ctx, NULL, "jtag_reset",
handle_jtag_reset_command, COMMAND_EXEC,
"toggle reset lines <trst> <srst>");
- register_command(cmd_ctx, NULL, "runtest",
+ COMMAND_REGISTER(cmd_ctx, NULL, "runtest",
handle_runtest_command, COMMAND_EXEC,
"move to Run-Test/Idle, and execute <num_cycles>");
- register_command(cmd_ctx, NULL, "irscan",
+ COMMAND_REGISTER(cmd_ctx, NULL, "irscan",
handle_irscan_command, COMMAND_EXEC,
"execute IR scan <device> <instr> [dev2] [instr2] ...");
"<state1>,<state2>,<state3>... "
"- move JTAG to state1 then to state2, state3, etc.");
- register_command(cmd_ctx, NULL, "verify_ircapture",
+ COMMAND_REGISTER(cmd_ctx, NULL, "verify_ircapture",
handle_verify_ircapture_command, COMMAND_ANY,
"verify value captured during Capture-IR <enable | disable>");
- register_command(cmd_ctx, NULL, "verify_jtag",
+ COMMAND_REGISTER(cmd_ctx, NULL, "verify_jtag",
handle_verify_jtag_command, COMMAND_ANY,
"verify value capture <enable | disable>");
- register_command(cmd_ctx, NULL, "tms_sequence",
+ COMMAND_REGISTER(cmd_ctx, NULL, "tms_sequence",
handle_tms_sequence_command, COMMAND_ANY,
"choose short(default) or long tms_sequence <short | long>");
static int vsllink_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "vsllink_usb_vid",
+ COMMAND_REGISTER(cmd_ctx, NULL, "vsllink_usb_vid",
vsllink_handle_usb_vid_command, COMMAND_CONFIG,
NULL);
- register_command(cmd_ctx, NULL, "vsllink_usb_pid",
+ COMMAND_REGISTER(cmd_ctx, NULL, "vsllink_usb_pid",
vsllink_handle_usb_pid_command, COMMAND_CONFIG,
NULL);
- register_command(cmd_ctx, NULL, "vsllink_usb_bulkin",
+ COMMAND_REGISTER(cmd_ctx, NULL, "vsllink_usb_bulkin",
vsllink_handle_usb_bulkin_command, COMMAND_CONFIG,
NULL);
- register_command(cmd_ctx, NULL, "vsllink_usb_bulkout",
+ COMMAND_REGISTER(cmd_ctx, NULL, "vsllink_usb_bulkout",
vsllink_handle_usb_bulkout_command, COMMAND_CONFIG,
NULL);
- register_command(cmd_ctx, NULL, "vsllink_usb_interface",
+ COMMAND_REGISTER(cmd_ctx, NULL, "vsllink_usb_interface",
vsllink_handle_usb_interface_command, COMMAND_CONFIG,
NULL);
- register_command(cmd_ctx, NULL, "vsllink_mode",
+ COMMAND_REGISTER(cmd_ctx, NULL, "vsllink_mode",
vsllink_handle_mode_command, COMMAND_CONFIG,
NULL);
int zy1000_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "power", handle_power_command, COMMAND_ANY,
+ COMMAND_REGISTER(cmd_ctx, NULL, "power", handle_power_command, COMMAND_ANY,
"power <on/off> - turn power switch to target on/off. No arguments - print status.");
Jim_CreateCommand(interp, "zy1000_version", jim_zy1000_version, NULL, NULL);
global_cmd_ctx = cmd_ctx = command_init(openocd_startup_tcl);
- register_command(cmd_ctx, NULL, "version", handle_version_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "version", handle_version_command,
COMMAND_EXEC, "show OpenOCD version");
/* register subsystem commands */
LOG_OUTPUT(OPENOCD_VERSION "\n");
- register_command(cmd_ctx, NULL, "init", handle_init_command,
+ COMMAND_REGISTER(cmd_ctx, NULL, "init", handle_init_command,
COMMAND_ANY, "initializes target and servers - nop on subsequent invocations");
return cmd_ctx;
if (!pld_devices)
return ERROR_OK;
- register_command(cmd_ctx, pld_cmd, "devices",
+ COMMAND_REGISTER(cmd_ctx, pld_cmd, "devices",
handle_pld_devices_command, COMMAND_EXEC,
"list configured pld devices");
- register_command(cmd_ctx, pld_cmd, "load",
+ COMMAND_REGISTER(cmd_ctx, pld_cmd, "load",
handle_pld_load_command, COMMAND_EXEC,
"load configuration <file> into programmable logic device");
int pld_register_commands(struct command_context *cmd_ctx)
{
- pld_cmd = register_command(cmd_ctx, NULL, "pld", NULL, COMMAND_ANY, "programmable logic device commands");
+ pld_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "pld", NULL, COMMAND_ANY, "programmable logic device commands");
- register_command(cmd_ctx, pld_cmd, "device", handle_pld_device_command, COMMAND_CONFIG, NULL);
+ COMMAND_REGISTER(cmd_ctx, pld_cmd, "device", handle_pld_device_command, COMMAND_CONFIG, NULL);
return ERROR_OK;
}
static int virtex2_register_commands(struct command_context *cmd_ctx)
{
- struct command *virtex2_cmd = register_command(cmd_ctx, NULL, "virtex2",
+ struct command *virtex2_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "virtex2",
NULL, COMMAND_ANY, "virtex2 specific commands");
- register_command(cmd_ctx, virtex2_cmd, "read_stat",
+ COMMAND_REGISTER(cmd_ctx, virtex2_cmd, "read_stat",
&virtex2_handle_read_stat_command, COMMAND_EXEC,
"read Virtex-II status register");
int gdb_register_commands(struct command_context *command_context)
{
- register_command(command_context, NULL, "gdb_sync",
+ COMMAND_REGISTER(command_context, NULL, "gdb_sync",
handle_gdb_sync_command, COMMAND_ANY,
"next stepi will return immediately allowing GDB to "
"fetch register state without affecting target state");
- register_command(command_context, NULL, "gdb_port",
+ COMMAND_REGISTER(command_context, NULL, "gdb_port",
handle_gdb_port_command, COMMAND_ANY,
"daemon configuration command gdb_port");
- register_command(command_context, NULL, "gdb_memory_map",
+ COMMAND_REGISTER(command_context, NULL, "gdb_memory_map",
handle_gdb_memory_map_command, COMMAND_CONFIG,
"enable or disable memory map");
- register_command(command_context, NULL, "gdb_flash_program",
+ COMMAND_REGISTER(command_context, NULL, "gdb_flash_program",
handle_gdb_flash_program_command, COMMAND_CONFIG,
"enable or disable flash program");
- register_command(command_context, NULL, "gdb_report_data_abort",
+ COMMAND_REGISTER(command_context, NULL, "gdb_report_data_abort",
handle_gdb_report_data_abort_command, COMMAND_CONFIG,
"enable or disable reporting data aborts");
- register_command(command_context, NULL, "gdb_breakpoint_override",
+ COMMAND_REGISTER(command_context, NULL, "gdb_breakpoint_override",
handle_gdb_breakpoint_override_command, COMMAND_EXEC,
"hard/soft/disable - force type of breakpoint "
"used by gdb 'break' commands.");
int server_register_commands(struct command_context *context)
{
- register_command(context, NULL, "shutdown",
+ COMMAND_REGISTER(context, NULL, "shutdown",
handle_shutdown_command, COMMAND_ANY,
"shut the server down");
int tcl_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "tcl_port",
+ COMMAND_REGISTER(cmd_ctx, NULL, "tcl_port",
handle_tcl_port_command, COMMAND_CONFIG,
"port on which to listen for incoming TCL syntax");
return ERROR_OK;
int telnet_register_commands(struct command_context *command_context)
{
- register_command(command_context, NULL, "exit",
+ COMMAND_REGISTER(command_context, NULL, "exit",
&handle_exit_command, COMMAND_EXEC,
"exit telnet session");
- register_command(command_context, NULL, "telnet_port",
+ COMMAND_REGISTER(command_context, NULL, "telnet_port",
&handle_telnet_port_command, COMMAND_ANY,
"port on which to listen for incoming telnet connections");
int svf_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "svf",
+ COMMAND_REGISTER(cmd_ctx, NULL, "svf",
&handle_svf_command, COMMAND_EXEC,
"run svf <file>");
armv4_5_register_commands(cmd_ctx);
- top_cmd = register_command(cmd_ctx, NULL, "arm11",
+ top_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm11",
NULL, COMMAND_ANY, NULL);
/* "hardware_step" is only here to check if the default
* simulate + breakpoint implementation is broken.
* TEMPORARY! NOT DOCUMENTED!
*/
- register_command(cmd_ctx, top_cmd, "hardware_step",
+ COMMAND_REGISTER(cmd_ctx, top_cmd, "hardware_step",
arm11_handle_bool_hardware_step, COMMAND_ANY,
"DEBUG ONLY - Hardware single stepping"
" (default: disabled)");
- mw_cmd = register_command(cmd_ctx, top_cmd, "memwrite",
+ mw_cmd = COMMAND_REGISTER(cmd_ctx, top_cmd, "memwrite",
NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, mw_cmd, "burst",
+ COMMAND_REGISTER(cmd_ctx, mw_cmd, "burst",
arm11_handle_bool_memwrite_burst, COMMAND_ANY,
"Enable/Disable non-standard but fast burst mode"
" (default: enabled)");
- register_command(cmd_ctx, mw_cmd, "error_fatal",
+ COMMAND_REGISTER(cmd_ctx, mw_cmd, "error_fatal",
arm11_handle_bool_memwrite_error_fatal, COMMAND_ANY,
"Terminate program if transfer error was found"
" (default: enabled)");
- register_command(cmd_ctx, top_cmd, "step_irq_enable",
+ COMMAND_REGISTER(cmd_ctx, top_cmd, "step_irq_enable",
arm11_handle_bool_step_irq_enable, COMMAND_ANY,
"Enable interrupts while stepping"
" (default: disabled)");
- register_command(cmd_ctx, top_cmd, "vcr",
+ COMMAND_REGISTER(cmd_ctx, top_cmd, "vcr",
arm11_handle_vcr, COMMAND_ANY,
"Control (Interrupt) Vector Catch Register");
retval = arm7_9_register_commands(cmd_ctx);
- arm720t_cmd = register_command(cmd_ctx, NULL, "arm720t",
+ arm720t_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm720t",
NULL, COMMAND_ANY,
"arm720t specific commands");
- register_command(cmd_ctx, arm720t_cmd, "cp15",
+ COMMAND_REGISTER(cmd_ctx, arm720t_cmd, "cp15",
arm720t_handle_cp15_command, COMMAND_EXEC,
"display/modify cp15 register <opcode> [value]");
{
struct command *arm7_9_cmd;
- arm7_9_cmd = register_command(cmd_ctx, NULL, "arm7_9",
+ arm7_9_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm7_9",
NULL, COMMAND_ANY, "arm7/9 specific commands");
- register_command(cmd_ctx, arm7_9_cmd, "dbgrq",
+ COMMAND_REGISTER(cmd_ctx, arm7_9_cmd, "dbgrq",
handle_arm7_9_dbgrq_command, COMMAND_ANY,
"use EmbeddedICE dbgrq instead of breakpoint "
"for target halt requests <enable | disable>");
- register_command(cmd_ctx, arm7_9_cmd, "fast_memory_access",
+ COMMAND_REGISTER(cmd_ctx, arm7_9_cmd, "fast_memory_access",
handle_arm7_9_fast_memory_access_command, COMMAND_ANY,
"use fast memory accesses instead of slower "
"but potentially safer accesses <enable | disable>");
- register_command(cmd_ctx, arm7_9_cmd, "dcc_downloads",
+ COMMAND_REGISTER(cmd_ctx, arm7_9_cmd, "dcc_downloads",
handle_arm7_9_dcc_downloads_command, COMMAND_ANY,
"use DCC downloads for larger memory writes <enable | disable>");
retval = arm9tdmi_register_commands(cmd_ctx);
- arm920t_cmd = register_command(cmd_ctx, NULL, "arm920t",
+ arm920t_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm920t",
NULL, COMMAND_ANY,
"arm920t specific commands");
- register_command(cmd_ctx, arm920t_cmd, "cp15",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "cp15",
arm920t_handle_cp15_command, COMMAND_EXEC,
"display/modify cp15 register <num> [value]");
- register_command(cmd_ctx, arm920t_cmd, "cp15i",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "cp15i",
arm920t_handle_cp15i_command, COMMAND_EXEC,
"display/modify cp15 (interpreted access) "
"<opcode> [value] [address]");
- register_command(cmd_ctx, arm920t_cmd, "cache_info",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "cache_info",
arm920t_handle_cache_info_command, COMMAND_EXEC,
"display information about target caches");
- register_command(cmd_ctx, arm920t_cmd, "read_cache",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "read_cache",
arm920t_handle_read_cache_command, COMMAND_EXEC,
"display I/D cache content");
- register_command(cmd_ctx, arm920t_cmd, "read_mmu",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "read_mmu",
arm920t_handle_read_mmu_command, COMMAND_EXEC,
"display I/D mmu content");
retval = arm9tdmi_register_commands(cmd_ctx);
- arm926ejs_cmd = register_command(cmd_ctx, NULL, "arm926ejs",
+ arm926ejs_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm926ejs",
NULL, COMMAND_ANY,
"arm926ejs specific commands");
- register_command(cmd_ctx, arm926ejs_cmd, "cache_info",
+ COMMAND_REGISTER(cmd_ctx, arm926ejs_cmd, "cache_info",
arm926ejs_handle_cache_info_command, COMMAND_EXEC,
"display information about target caches");
struct command *arm966e_cmd;
retval = arm9tdmi_register_commands(cmd_ctx);
- arm966e_cmd = register_command(cmd_ctx, NULL, "arm966e",
+ arm966e_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm966e",
NULL, COMMAND_ANY,
"arm966e specific commands");
- register_command(cmd_ctx, arm966e_cmd, "cp15",
+ COMMAND_REGISTER(cmd_ctx, arm966e_cmd, "cp15",
arm966e_handle_cp15_command, COMMAND_EXEC,
"display/modify cp15 register <num> [value]");
struct command *arm9tdmi_cmd;
retval = arm7_9_register_commands(cmd_ctx);
- arm9tdmi_cmd = register_command(cmd_ctx, NULL, "arm9",
+ arm9tdmi_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm9",
NULL, COMMAND_ANY,
"arm9 specific commands");
- register_command(cmd_ctx, arm9tdmi_cmd, "vector_catch",
+ COMMAND_REGISTER(cmd_ctx, arm9tdmi_cmd, "vector_catch",
handle_arm9tdmi_catch_vectors_command, COMMAND_EXEC,
"arm9 vector_catch [all|none|reset|undef|swi|pabt|dabt|irq|fiq] ...");
{
struct command *armv4_5_cmd;
- armv4_5_cmd = register_command(cmd_ctx, NULL, "arm",
+ armv4_5_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm",
NULL, COMMAND_ANY,
"generic ARM commands");
- register_command(cmd_ctx, armv4_5_cmd, "reg",
+ COMMAND_REGISTER(cmd_ctx, armv4_5_cmd, "reg",
handle_armv4_5_reg_command, COMMAND_EXEC,
"display ARM core registers");
- register_command(cmd_ctx, armv4_5_cmd, "core_state",
+ COMMAND_REGISTER(cmd_ctx, armv4_5_cmd, "core_state",
handle_armv4_5_core_state_command, COMMAND_EXEC,
"display/change ARM core state <arm | thumb>");
- register_command(cmd_ctx, armv4_5_cmd, "disassemble",
+ COMMAND_REGISTER(cmd_ctx, armv4_5_cmd, "disassemble",
handle_armv4_5_disassemble_command, COMMAND_EXEC,
"disassemble instructions "
"<address> [<count> ['thumb']]");
{
struct command *arm_adi_v5_dap_cmd;
- arm_adi_v5_dap_cmd = register_command(cmd_ctx, NULL, "dap",
+ arm_adi_v5_dap_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "dap",
NULL, COMMAND_ANY,
"cortex dap specific commands");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "info",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "info",
handle_dap_info_command, COMMAND_EXEC,
"dap info for ap [num], "
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
handle_dap_apsel_command, COMMAND_EXEC,
"select a different AP [num] (default 0)");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
handle_dap_apid_command, COMMAND_EXEC,
"return id reg from AP [num], "
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
handle_dap_baseaddr_command, COMMAND_EXEC,
"return debug base address from AP [num], "
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
handle_dap_memaccess_command, COMMAND_EXEC,
"set/get number of extra tck for mem-ap memory "
"bus access [0-255]");
{
struct command *arm_adi_v5_dap_cmd;
- arm_adi_v5_dap_cmd = register_command(cmd_ctx, NULL, "dap",
+ arm_adi_v5_dap_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "dap",
NULL, COMMAND_ANY,
"cortex dap specific commands");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "info",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "info",
handle_dap_info_command, COMMAND_EXEC,
"Displays dap info for ap [num],"
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
handle_dap_apsel_command, COMMAND_EXEC,
"Select a different AP [num] (default 0)");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
handle_dap_apid_command, COMMAND_EXEC,
"Displays id reg from AP [num], "
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
handle_dap_baseaddr_command, COMMAND_EXEC,
"Displays debug base address from AP [num],"
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
handle_dap_memaccess_command, COMMAND_EXEC,
"set/get number of extra tck for mem-ap "
"memory bus access [0-255]");
armv4_5_register_commands(cmd_ctx);
armv7a_register_commands(cmd_ctx);
- cortex_a8_cmd = register_command(cmd_ctx, NULL, "cortex_a8",
+ cortex_a8_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "cortex_a8",
NULL, COMMAND_ANY,
"cortex_a8 specific commands");
- register_command(cmd_ctx, cortex_a8_cmd, "cache_info",
+ COMMAND_REGISTER(cmd_ctx, cortex_a8_cmd, "cache_info",
cortex_a8_handle_cache_info_command, COMMAND_EXEC,
"display information about target caches");
- register_command(cmd_ctx, cortex_a8_cmd, "dbginit",
+ COMMAND_REGISTER(cmd_ctx, cortex_a8_cmd, "dbginit",
cortex_a8_handle_dbginit_command, COMMAND_EXEC,
"Initialize core debug");
retval = armv7m_register_commands(cmd_ctx);
- cortex_m3_cmd = register_command(cmd_ctx, NULL, "cortex_m3",
+ cortex_m3_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "cortex_m3",
NULL, COMMAND_ANY, "cortex_m3 specific commands");
- register_command(cmd_ctx, cortex_m3_cmd, "disassemble",
+ COMMAND_REGISTER(cmd_ctx, cortex_m3_cmd, "disassemble",
handle_cortex_m3_disassemble_command, COMMAND_EXEC,
"disassemble Thumb2 instructions <address> [<count>]");
- register_command(cmd_ctx, cortex_m3_cmd, "maskisr",
+ COMMAND_REGISTER(cmd_ctx, cortex_m3_cmd, "maskisr",
handle_cortex_m3_mask_interrupts_command, COMMAND_EXEC,
"mask cortex_m3 interrupts ['on'|'off']");
- register_command(cmd_ctx, cortex_m3_cmd, "vector_catch",
+ COMMAND_REGISTER(cmd_ctx, cortex_m3_cmd, "vector_catch",
handle_cortex_m3_vector_catch_command, COMMAND_EXEC,
"catch hardware vectors ['all'|'none'|<list>]");
static int etb_register_commands(struct command_context *cmd_ctx)
{
- struct command *etb_cmd = register_command(cmd_ctx, NULL, "etb",
+ struct command *etb_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "etb",
NULL, COMMAND_ANY, "Embedded Trace Buffer");
- register_command(cmd_ctx, etb_cmd, "config",
+ COMMAND_REGISTER(cmd_ctx, etb_cmd, "config",
handle_etb_config_command, COMMAND_CONFIG,
NULL);
int etm_register_commands(struct command_context *cmd_ctx)
{
- etm_cmd = register_command(cmd_ctx, NULL, "etm", NULL, COMMAND_ANY, "Embedded Trace Macrocell");
+ etm_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "etm", NULL, COMMAND_ANY, "Embedded Trace Macrocell");
- register_command(cmd_ctx, etm_cmd, "config", handle_etm_config_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "config", handle_etm_config_command,
COMMAND_CONFIG, "etm config <target> <port_width> <port_mode> <clocking> <capture_driver>");
return ERROR_OK;
static int etm_register_user_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, etm_cmd, "tracemode", handle_etm_tracemode_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "tracemode", handle_etm_tracemode_command,
COMMAND_EXEC, "configure/display trace mode: "
"<none | data | address | all> "
"<context_id_bits> <cycle_accurate> <branch_output>");
- register_command(cmd_ctx, etm_cmd, "info", handle_etm_info_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "info", handle_etm_info_command,
COMMAND_EXEC, "display info about the current target's ETM");
- register_command(cmd_ctx, etm_cmd, "trigger_percent", handle_etm_trigger_percent_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "trigger_percent", handle_etm_trigger_percent_command,
COMMAND_EXEC, "amount (<percent>) of trace buffer to be filled after the trigger occured");
- register_command(cmd_ctx, etm_cmd, "status", handle_etm_status_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "status", handle_etm_status_command,
COMMAND_EXEC, "display current target's ETM status");
- register_command(cmd_ctx, etm_cmd, "start", handle_etm_start_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "start", handle_etm_start_command,
COMMAND_EXEC, "start ETM trace collection");
- register_command(cmd_ctx, etm_cmd, "stop", handle_etm_stop_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "stop", handle_etm_stop_command,
COMMAND_EXEC, "stop ETM trace collection");
- register_command(cmd_ctx, etm_cmd, "analyze", handle_etm_analyze_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "analyze", handle_etm_analyze_command,
COMMAND_EXEC, "anaylze collected ETM trace");
- register_command(cmd_ctx, etm_cmd, "image", handle_etm_image_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "image", handle_etm_image_command,
COMMAND_EXEC, "load image from <file> [base address]");
- register_command(cmd_ctx, etm_cmd, "dump", handle_etm_dump_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "dump", handle_etm_dump_command,
COMMAND_EXEC, "dump captured trace data <file>");
- register_command(cmd_ctx, etm_cmd, "load", handle_etm_load_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "load", handle_etm_load_command,
COMMAND_EXEC, "load trace data for analysis <file>");
return ERROR_OK;
{
struct command *etm_dummy_cmd;
- etm_dummy_cmd = register_command(cmd_ctx, NULL, "etm_dummy", NULL, COMMAND_ANY, "Dummy ETM capture driver");
+ etm_dummy_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "etm_dummy", NULL, COMMAND_ANY, "Dummy ETM capture driver");
- register_command(cmd_ctx, etm_dummy_cmd, "config", handle_etm_dummy_config_command, COMMAND_CONFIG, NULL);
+ COMMAND_REGISTER(cmd_ctx, etm_dummy_cmd, "config", handle_etm_dummy_config_command, COMMAND_CONFIG, NULL);
return ERROR_OK;
}
{
struct command *oocd_trace_cmd;
- oocd_trace_cmd = register_command(cmd_ctx, NULL, "oocd_trace", NULL, COMMAND_ANY, "OpenOCD + trace");
+ oocd_trace_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "oocd_trace", NULL, COMMAND_ANY, "OpenOCD + trace");
- register_command(cmd_ctx, oocd_trace_cmd, "config", handle_oocd_trace_config_command, COMMAND_CONFIG, NULL);
+ COMMAND_REGISTER(cmd_ctx, oocd_trace_cmd, "config", handle_oocd_trace_config_command, COMMAND_CONFIG, NULL);
- register_command(cmd_ctx, oocd_trace_cmd, "status", handle_oocd_trace_status_command, COMMAND_EXEC, "display OpenOCD + trace status");
- register_command(cmd_ctx, oocd_trace_cmd, "resync", handle_oocd_trace_resync_command, COMMAND_EXEC, "resync OpenOCD + trace capture clock");
+ COMMAND_REGISTER(cmd_ctx, oocd_trace_cmd, "status", handle_oocd_trace_status_command, COMMAND_EXEC, "display OpenOCD + trace status");
+ COMMAND_REGISTER(cmd_ctx, oocd_trace_cmd, "resync", handle_oocd_trace_resync_command, COMMAND_EXEC, "resync OpenOCD + trace capture clock");
return ERROR_OK;
}
int target_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "targets",
+ COMMAND_REGISTER(cmd_ctx, NULL, "targets",
handle_targets_command, COMMAND_EXEC,
"change current command line target (one parameter) "
"or list targets (no parameters)");
if ((retval = trace_register_commands(cmd_ctx)) != ERROR_OK)
return retval;
- register_command(cmd_ctx, NULL, "profile",
+ COMMAND_REGISTER(cmd_ctx, NULL, "profile",
handle_profile_command, COMMAND_EXEC,
"profiling samples the CPU PC");
"convert a TCL array to memory locations and write the values "
"<ARRAYNAME> <WIDTH = 32/16/8> <ADDRESS> <COUNT>");
- register_command(cmd_ctx, NULL, "fast_load_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "fast_load_image",
handle_fast_load_image_command, COMMAND_ANY,
"same CMD_ARGV as load_image, image stored in memory "
"- mainly for profiling purposes");
- register_command(cmd_ctx, NULL, "fast_load",
+ COMMAND_REGISTER(cmd_ctx, NULL, "fast_load",
handle_fast_load_command, COMMAND_ANY,
"loads active fast load image to current target "
"- mainly for profiling purposes");
/** @todo don't register virt2phys() unless target supports it */
- register_command(cmd_ctx, NULL, "virt2phys",
+ COMMAND_REGISTER(cmd_ctx, NULL, "virt2phys",
handle_virt2phys_command, COMMAND_ANY,
"translate a virtual address into a physical address");
- register_command(cmd_ctx, NULL, "reg",
+ COMMAND_REGISTER(cmd_ctx, NULL, "reg",
handle_reg_command, COMMAND_EXEC,
"display or set a register");
- register_command(cmd_ctx, NULL, "poll",
+ COMMAND_REGISTER(cmd_ctx, NULL, "poll",
handle_poll_command, COMMAND_EXEC,
"poll target state");
- register_command(cmd_ctx, NULL, "wait_halt",
+ COMMAND_REGISTER(cmd_ctx, NULL, "wait_halt",
handle_wait_halt_command, COMMAND_EXEC,
"wait for target halt [time (s)]");
- register_command(cmd_ctx, NULL, "halt",
+ COMMAND_REGISTER(cmd_ctx, NULL, "halt",
handle_halt_command, COMMAND_EXEC,
"halt target");
- register_command(cmd_ctx, NULL, "resume",
+ COMMAND_REGISTER(cmd_ctx, NULL, "resume",
handle_resume_command, COMMAND_EXEC,
"resume target [addr]");
- register_command(cmd_ctx, NULL, "reset",
+ COMMAND_REGISTER(cmd_ctx, NULL, "reset",
handle_reset_command, COMMAND_EXEC,
"reset target [run | halt | init] - default is run");
- register_command(cmd_ctx, NULL, "soft_reset_halt",
+ COMMAND_REGISTER(cmd_ctx, NULL, "soft_reset_halt",
handle_soft_reset_halt_command, COMMAND_EXEC,
"halt the target and do a soft reset");
- register_command(cmd_ctx, NULL, "step",
+ COMMAND_REGISTER(cmd_ctx, NULL, "step",
handle_step_command, COMMAND_EXEC,
"step one instruction from current PC or [addr]");
- register_command(cmd_ctx, NULL, "mdw",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mdw",
handle_md_command, COMMAND_EXEC,
"display memory words [phys] <addr> [count]");
- register_command(cmd_ctx, NULL, "mdh",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mdh",
handle_md_command, COMMAND_EXEC,
"display memory half-words [phys] <addr> [count]");
- register_command(cmd_ctx, NULL, "mdb",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mdb",
handle_md_command, COMMAND_EXEC,
"display memory bytes [phys] <addr> [count]");
- register_command(cmd_ctx, NULL, "mww",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mww",
handle_mw_command, COMMAND_EXEC,
"write memory word [phys] <addr> <value> [count]");
- register_command(cmd_ctx, NULL, "mwh",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mwh",
handle_mw_command, COMMAND_EXEC,
"write memory half-word [phys] <addr> <value> [count]");
- register_command(cmd_ctx, NULL, "mwb",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mwb",
handle_mw_command, COMMAND_EXEC,
"write memory byte [phys] <addr> <value> [count]");
- register_command(cmd_ctx, NULL, "bp",
+ COMMAND_REGISTER(cmd_ctx, NULL, "bp",
handle_bp_command, COMMAND_EXEC,
"list or set breakpoint [<address> <length> [hw]]");
- register_command(cmd_ctx, NULL, "rbp",
+ COMMAND_REGISTER(cmd_ctx, NULL, "rbp",
handle_rbp_command, COMMAND_EXEC,
"remove breakpoint <address>");
- register_command(cmd_ctx, NULL, "wp",
+ COMMAND_REGISTER(cmd_ctx, NULL, "wp",
handle_wp_command, COMMAND_EXEC,
"list or set watchpoint "
"[<address> <length> <r/w/a> [value] [mask]]");
- register_command(cmd_ctx, NULL, "rwp",
+ COMMAND_REGISTER(cmd_ctx, NULL, "rwp",
handle_rwp_command, COMMAND_EXEC,
"remove watchpoint <address>");
- register_command(cmd_ctx, NULL, "load_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "load_image",
handle_load_image_command, COMMAND_EXEC,
"load_image <file> <address> "
"['bin'|'ihex'|'elf'|'s19'] [min_address] [max_length]");
- register_command(cmd_ctx, NULL, "dump_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "dump_image",
handle_dump_image_command, COMMAND_EXEC,
"dump_image <file> <address> <size>");
- register_command(cmd_ctx, NULL, "verify_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "verify_image",
handle_verify_image_command, COMMAND_EXEC,
"verify_image <file> [offset] [type]");
- register_command(cmd_ctx, NULL, "test_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "test_image",
handle_test_image_command, COMMAND_EXEC,
"test_image <file> [offset] [type]");
int target_request_register_commands(struct command_context *cmd_ctx)
{
target_request_cmd =
- register_command(cmd_ctx, NULL, "target_request", NULL, COMMAND_ANY, "target_request commands");
+ COMMAND_REGISTER(cmd_ctx, NULL, "target_request", NULL, COMMAND_ANY, "target_request commands");
- register_command(cmd_ctx, target_request_cmd, "debugmsgs", handle_target_request_debugmsgs_command,
+ COMMAND_REGISTER(cmd_ctx, target_request_cmd, "debugmsgs", handle_target_request_debugmsgs_command,
COMMAND_EXEC, "enable/disable reception of debug messages from target");
return ERROR_OK;
int trace_register_commands(struct command_context *cmd_ctx)
{
struct command *trace_cmd =
- register_command(cmd_ctx, NULL, "trace", NULL, COMMAND_ANY, "trace commands");
+ COMMAND_REGISTER(cmd_ctx, NULL, "trace", NULL, COMMAND_ANY, "trace commands");
- register_command(cmd_ctx, trace_cmd, "history", handle_trace_history_command,
+ COMMAND_REGISTER(cmd_ctx, trace_cmd, "history", handle_trace_history_command,
COMMAND_EXEC, "display trace history, ['clear'] history or set [size]");
- register_command(cmd_ctx, trace_cmd, "point", handle_trace_point_command,
+ COMMAND_REGISTER(cmd_ctx, trace_cmd, "point", handle_trace_point_command,
COMMAND_EXEC, "display trace points, ['clear'] list of trace points, or add new tracepoint at [address]");
return ERROR_OK;
{
struct command *xscale_cmd;
- xscale_cmd = register_command(cmd_ctx, NULL, "xscale", NULL, COMMAND_ANY, "xscale specific commands");
+ xscale_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "xscale", NULL, COMMAND_ANY, "xscale specific commands");
-
register_command(cmd_ctx, xscale_cmd, "debug_handler", xscale_handle_debug_handler_command, COMMAND_ANY, "'xscale debug_handler <target#> <address>' command takes two required operands");
- register_command(cmd_ctx, xscale_cmd, "cache_clean_address", xscale_handle_cache_clean_address_command, COMMAND_ANY, NULL);
+
COMMAND_REGISTER(cmd_ctx, xscale_cmd, "debug_handler", xscale_handle_debug_handler_command, COMMAND_ANY, "'xscale debug_handler <target#> <address>' command takes two required operands");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "cache_clean_address", xscale_handle_cache_clean_address_command, COMMAND_ANY, NULL);
- register_command(cmd_ctx, xscale_cmd, "cache_info", xscale_handle_cache_info_command, COMMAND_EXEC, NULL);
- register_command(cmd_ctx, xscale_cmd, "mmu", xscale_handle_mmu_command, COMMAND_EXEC, "['enable'|'disable'] the MMU");
- register_command(cmd_ctx, xscale_cmd, "icache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the ICache");
- register_command(cmd_ctx, xscale_cmd, "dcache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the DCache");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "cache_info", xscale_handle_cache_info_command, COMMAND_EXEC, NULL);
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "mmu", xscale_handle_mmu_command, COMMAND_EXEC, "['enable'|'disable'] the MMU");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "icache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the ICache");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "dcache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the DCache");
- register_command(cmd_ctx, xscale_cmd, "vector_catch", xscale_handle_vector_catch_command, COMMAND_EXEC, "<mask> of vectors that should be catched");
- register_command(cmd_ctx, xscale_cmd, "vector_table", xscale_handle_vector_table_command, COMMAND_EXEC, "<high|low> <index> <code> set static code for exception handler entry");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "vector_catch", xscale_handle_vector_catch_command, COMMAND_EXEC, "<mask> of vectors that should be catched");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "vector_table", xscale_handle_vector_table_command, COMMAND_EXEC, "<high|low> <index> <code> set static code for exception handler entry");
- register_command(cmd_ctx, xscale_cmd, "trace_buffer", xscale_handle_trace_buffer_command, COMMAND_EXEC, "<enable | disable> ['fill' [n]|'wrap']");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "trace_buffer", xscale_handle_trace_buffer_command, COMMAND_EXEC, "<enable | disable> ['fill' [n]|'wrap']");
- register_command(cmd_ctx, xscale_cmd, "dump_trace", xscale_handle_dump_trace_command, COMMAND_EXEC, "dump content of trace buffer to <file>");
- register_command(cmd_ctx, xscale_cmd, "analyze_trace", xscale_handle_analyze_trace_buffer_command, COMMAND_EXEC, "analyze content of trace buffer");
- register_command(cmd_ctx, xscale_cmd, "trace_image", xscale_handle_trace_image_command,
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "dump_trace", xscale_handle_dump_trace_command, COMMAND_EXEC, "dump content of trace buffer to <file>");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "analyze_trace", xscale_handle_analyze_trace_buffer_command, COMMAND_EXEC, "analyze content of trace buffer");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "trace_image", xscale_handle_trace_image_command,
COMMAND_EXEC, "load image from <file> [base address]");
- register_command(cmd_ctx, xscale_cmd, "cp15", xscale_handle_cp15, COMMAND_EXEC, "access coproc 15 <register> [value]");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "cp15", xscale_handle_cp15, COMMAND_EXEC, "access coproc 15 <register> [value]");
armv4_5_register_commands(cmd_ctx);
int xsvf_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "xsvf",
+ COMMAND_REGISTER(cmd_ctx, NULL, "xsvf",
&handle_xsvf_command, COMMAND_EXEC,
"run xsvf <file> [virt2] [quiet]");
projects / fw / openocd / commitdiff