MIPS32 Fix typos

I suppose 0xff300008 is the correct value for EJTAG_V20_DBS.
20 miliseconds is too much for scan delay, 2ms is enough in mips_m4k scan_delay handler.
mips32 scan_delay has the correct value.

Change-Id: Ie9dc650065a58e845687058a4c930f85909beec9
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/2271
Tested-by: jenkins
Reviewed-by: Kent Brinkley <jkbrinkley.imgtec@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/src/target/mips_ejtag.h b/src/target/mips_ejtag.h
index 3e0d83101e5e121af274835be2da413691498be4..16918a20d41b4530c9b6597f4b1a28a369245dd1 100644 (file)
--- a/src/target/mips_ejtag.h
+++ b/src/target/mips_ejtag.h
@@ -144,7 +144,7 @@
 #define EJTAG_V20_IBC_OFFS             0x4     /* IBC Offset */
 #define EJTAG_V20_IBM_OFFS             0x8
 #define EJTAG_V20_IBAn_STEP            0x10    /* Offset for next channel */
-#define EJTAG_V20_DBS                  0xFF30008
+#define EJTAG_V20_DBS                  0xFF300008
 #define EJTAG_V20_DBA0                 0xFF300200
 #define EJTAG_V20_DBC_OFFS             0x4
 #define EJTAG_V20_DBM_OFFS             0x8

diff --git a/src/target/mips_m4k.c b/src/target/mips_m4k.c
index 650f7992554a0ed80d7d740702cb9397281e8799..e8a38b96f507a3d8c5deb0a11616c44da51f0744 100644 (file)
--- a/src/target/mips_m4k.c
+++ b/src/target/mips_m4k.c
@@ -1341,7 +1341,7 @@ COMMAND_HANDLER(mips_m4k_handle_scan_delay_command)
                        return ERROR_COMMAND_SYNTAX_ERROR;
 
        command_print(CMD_CTX, "scan delay: %d nsec", ejtag_info->scan_delay);
-       if (ejtag_info->scan_delay >= 20000000) {
+       if (ejtag_info->scan_delay >= 2000000) {
                ejtag_info->mode = 0;
                command_print(CMD_CTX, "running in legacy mode");
        } else {