-#daemon configuration\r
-telnet_port 4444\r
-gdb_port 3333\r
-\r
-# tell gdb our flash memory map\r
-gdb_memory_map enable\r
-# enable flash programming\r
-gdb_flash_program enable\r
-\r
-#interface\r
-interface ft2232\r
-ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"\r
-ft2232_layout turtelizer2\r
-ft2232_vid_pid 0x0403 0xbdc8\r
-jtag_speed 0\r
-jtag_nsrst_delay 200\r
-jtag_ntrst_delay 200\r
-\r
-#use combined on interfaces or targets that can't set TRST/SRST separately\r
-reset_config srst_only\r
-\r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#target configuration\r
-daemon_startup reset\r
-\r
-#target <type> <startup mode>\r
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>\r
-target arm7tdmi little run_and_init 0 arm7tdmi\r
-run_and_halt_time 0 30\r
-\r
-target_script 0 reset .\prj\at91r40008_reset.script\r
-\r
-working_area 0 0x3C000 0x4000 nobackup \r
-flash bank cfi 0x10000000 0x400000 2 2 0\r
-\r
-# For more information about the configuration files, take a look at:\r
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger\r
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+gdb_memory_map enable
+# enable flash programming
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"
+ft2232_layout turtelizer2
+ft2232_vid_pid 0x0403 0xbdc8
+jtag_speed 0
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_init 0 arm7tdmi
+run_and_halt_time 0 30
+
+target_script 0 reset .\prj\at91r40008_reset.script
+
+working_area 0 0x3C000 0x4000 nobackup
+flash bank cfi 0x10000000 0x400000 2 2 0
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
-/****************************************************************************\r
-* Copyright (c) 2006 by Michael Fischer. All rights reserved.\r
-*\r
-* Redistribution and use in source and binary forms, with or without \r
-* modification, are permitted provided that the following conditions \r
-* are met:\r
-* \r
-* 1. Redistributions of source code must retain the above copyright \r
-* notice, this list of conditions and the following disclaimer.\r
-* 2. Redistributions in binary form must reproduce the above copyright\r
-* notice, this list of conditions and the following disclaimer in the \r
-* documentation and/or other materials provided with the distribution.\r
-* 3. Neither the name of the author nor the names of its contributors may \r
-* be used to endorse or promote products derived from this software \r
-* without specific prior written permission.\r
-*\r
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS \r
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT \r
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS \r
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL \r
-* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, \r
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, \r
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS \r
-* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED \r
-* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, \r
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF \r
-* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF \r
-* SUCH DAMAGE.\r
-*\r
-****************************************************************************\r
-*\r
-* History:\r
-*\r
-* 09.04.06 mifi First Version\r
-****************************************************************************/\r
-\r
-\r
-ENTRY(ResetHandler)\r
-SEARCH_DIR(.)\r
-\r
-/*\r
- * Define stack size here\r
- */\r
-FIQ_STACK_SIZE = 0x0100;\r
-IRQ_STACK_SIZE = 0x0100;\r
-ABT_STACK_SIZE = 0x0100;\r
-UND_STACK_SIZE = 0x0100;\r
-SVC_STACK_SIZE = 0x0400;\r
-\r
-/*\r
- * This file, ethernut3_ram.ld, locate the program in the internal\r
- * ram of the AT91R40008. For more information about the memory of the \r
- * AT91R40008 take a look in the AT91 ARM data sheet.\r
- * Reference is made to Rev. 1354D-ATARM-08/02\r
- *\r
- * Take a look at page 15, Memory Map, Figure 3\r
- */\r
- \r
-MEMORY\r
-{\r
- ram : org = 0x00000000, len = 256k\r
-}\r
-\r
-/*\r
- * Do not change the next code\r
- */\r
-SECTIONS\r
-{\r
- .text :\r
- {\r
- *(.vectors);\r
- . = ALIGN(4);\r
- *(.init);\r
- . = ALIGN(4);\r
- *(.text);\r
- . = ALIGN(4);\r
- *(.rodata);\r
- . = ALIGN(4);\r
- *(.rodata*);\r
- . = ALIGN(4);\r
- *(.glue_7t);\r
- . = ALIGN(4);\r
- *(.glue_7);\r
- . = ALIGN(4);\r
- etext = .;\r
- } > ram\r
-\r
- .data :\r
- {\r
- PROVIDE (__data_start = .);\r
- *(.data)\r
- . = ALIGN(4);\r
- edata = .;\r
- _edata = .;\r
- PROVIDE (__data_end = .);\r
- } > ram\r
-\r
- .bss :\r
- {\r
- PROVIDE (__bss_start = .);\r
- *(.bss)\r
- *(COMMON)\r
- . = ALIGN(4);\r
- PROVIDE (__bss_end = .);\r
- \r
- . = ALIGN(256);\r
- \r
- PROVIDE (__stack_start = .);\r
- \r
- PROVIDE (__stack_fiq_start = .);\r
- . += FIQ_STACK_SIZE;\r
- . = ALIGN(4);\r
- PROVIDE (__stack_fiq_end = .);\r
-\r
- PROVIDE (__stack_irq_start = .);\r
- . += IRQ_STACK_SIZE;\r
- . = ALIGN(4);\r
- PROVIDE (__stack_irq_end = .);\r
-\r
- PROVIDE (__stack_abt_start = .);\r
- . += ABT_STACK_SIZE;\r
- . = ALIGN(4);\r
- PROVIDE (__stack_abt_end = .);\r
-\r
- PROVIDE (__stack_und_start = .);\r
- . += UND_STACK_SIZE;\r
- . = ALIGN(4);\r
- PROVIDE (__stack_und_end = .);\r
-\r
- PROVIDE (__stack_svc_start = .);\r
- . += SVC_STACK_SIZE;\r
- . = ALIGN(4);\r
- PROVIDE (__stack_svc_end = .);\r
- PROVIDE (__stack_end = .);\r
- PROVIDE (__heap_start = .); \r
- } > ram\r
- \r
-}\r
-/*** EOF ***/\r
-\r
+/****************************************************************************
+* Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* 1. Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* 3. Neither the name of the author nor the names of its contributors may
+* be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+* SUCH DAMAGE.
+*
+****************************************************************************
+*
+* History:
+*
+* 09.04.06 mifi First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+/*
+ * This file, ethernut3_ram.ld, locate the program in the internal
+ * ram of the AT91R40008. For more information about the memory of the
+ * AT91R40008 take a look in the AT91 ARM data sheet.
+ * Reference is made to Rev. 1354D-ATARM-08/02
+ *
+ * Take a look at page 15, Memory Map, Figure 3
+ */
+
+MEMORY
+{
+ ram : org = 0x00000000, len = 256k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+ .text :
+ {
+ *(.vectors);
+ . = ALIGN(4);
+ *(.init);
+ . = ALIGN(4);
+ *(.text);
+ . = ALIGN(4);
+ *(.rodata);
+ . = ALIGN(4);
+ *(.rodata*);
+ . = ALIGN(4);
+ *(.glue_7t);
+ . = ALIGN(4);
+ *(.glue_7);
+ . = ALIGN(4);
+ etext = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE (__data_start = .);
+ *(.data)
+ . = ALIGN(4);
+ edata = .;
+ _edata = .;
+ PROVIDE (__data_end = .);
+ } > ram
+
+ .bss :
+ {
+ PROVIDE (__bss_start = .);
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE (__bss_end = .);
+
+ . = ALIGN(256);
+
+ PROVIDE (__stack_start = .);
+
+ PROVIDE (__stack_fiq_start = .);
+ . += FIQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_fiq_end = .);
+
+ PROVIDE (__stack_irq_start = .);
+ . += IRQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_irq_end = .);
+
+ PROVIDE (__stack_abt_start = .);
+ . += ABT_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_abt_end = .);
+
+ PROVIDE (__stack_und_start = .);
+ . += UND_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_und_end = .);
+
+ PROVIDE (__stack_svc_start = .);
+ . += SVC_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_svc_end = .);
+ PROVIDE (__stack_end = .);
+ PROVIDE (__heap_start = .);
+ } > ram
+
+}
+/*** EOF ***/
+
projects / fw / openocd / commitdiff