at91: add at91sam9261 chip register definition

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

diff --git a/tcl/chip/atmel/at91/at91sam9261.cfg b/tcl/chip/atmel/at91/at91sam9261.cfg
new file mode 100644 (file)
index 0000000..61b0c0b
--- /dev/null
+++ b/tcl/chip/atmel/at91/at91sam9261.cfg
@@ -0,0 +1,90 @@
+#
+# Peripheral identifiers/interrupts.
+#
+set AT91_ID_FIQ                0       ;# Advanced Interrupt Controller (FIQ)
+set AT91_ID_SYS                1       ;# System Peripherals
+set AT91SAM9261_ID_PIOA        2       ;# Parallel IO Controller A
+set AT91SAM9261_ID_PIOB        3       ;# Parallel IO Controller B
+set AT91SAM9261_ID_PIOC        4       ;# Parallel IO Controller C
+set AT91SAM9261_ID_US0 6       ;# USART 0
+set AT91SAM9261_ID_US1 7       ;# USART 1
+set AT91SAM9261_ID_US2 8       ;# USART 2
+set AT91SAM9261_ID_MCI 9       ;# Multimedia Card Interface
+set AT91SAM9261_ID_UDP 10      ;# USB Device Port
+set AT91SAM9261_ID_TWI 11      ;# Two-Wire Interface
+set AT91SAM9261_ID_SPI0        12      ;# Serial Peripheral Interface 0
+set AT91SAM9261_ID_SPI1        13      ;# Serial Peripheral Interface 1
+set AT91SAM9261_ID_SSC0        14      ;# Serial Synchronous Controller 0
+set AT91SAM9261_ID_SSC1        15      ;# Serial Synchronous Controller 1
+set AT91SAM9261_ID_SSC2        16      ;# Serial Synchronous Controller 2
+set AT91SAM9261_ID_TC0 17      ;# Timer Counter 0
+set AT91SAM9261_ID_TC1 18      ;# Timer Counter 1
+set AT91SAM9261_ID_TC2 19      ;# Timer Counter 2
+set AT91SAM9261_ID_UHP 20      ;# USB Host port
+set AT91SAM9261_ID_LCDC        21      ;# LDC Controller
+set AT91SAM9261_ID_IRQ0        29      ;# Advanced Interrupt Controller (IRQ0)
+set AT91SAM9261_ID_IRQ1        30      ;# Advanced Interrupt Controller (IRQ1)
+set AT91SAM9261_ID_IRQ2        31      ;# Advanced Interrupt Controller (IRQ2)
+
+
+#
+# User Peripheral physical base addresses.
+#
+set AT91SAM9261_BASE_TCB0              0xfffa0000
+set AT91SAM9261_BASE_TC0               0xfffa0000
+set AT91SAM9261_BASE_TC1               0xfffa0040
+set AT91SAM9261_BASE_TC2               0xfffa0080
+set AT91SAM9261_BASE_UDP               0xfffa4000
+set AT91SAM9261_BASE_MCI               0xfffa8000
+set AT91SAM9261_BASE_TWI               0xfffac000
+set AT91SAM9261_BASE_US0               0xfffb0000
+set AT91SAM9261_BASE_US1               0xfffb4000
+set AT91SAM9261_BASE_US2               0xfffb8000
+set AT91SAM9261_BASE_SSC0              0xfffbc000
+set AT91SAM9261_BASE_SSC1              0xfffc0000
+set AT91SAM9261_BASE_SSC2              0xfffc4000
+set AT91SAM9261_BASE_SPI0              0xfffc8000
+set AT91SAM9261_BASE_SPI1              0xfffcc000
+set AT91_BASE_SYS                      0xffffea00
+
+
+#
+# System Peripherals (offset from AT91_BASE_SYS)
+#
+set AT91_SDRAMC        0xffffea00
+set AT91_SMC   0xffffec00
+set AT91_MATRIX        0xffffee00
+set AT91_AIC   0xfffff000
+set AT91_DBGU  0xfffff200
+set AT91_PIOA  0xfffff400
+set AT91_PIOB  0xfffff600
+set AT91_PIOC  0xfffff800
+set AT91_PMC   0xfffffc00
+set AT91_RSTC  0xfffffd00
+set AT91_SHDWC 0xfffffd10
+set AT91_RTT   0xfffffd20
+set AT91_PIT   0xfffffd30
+set AT91_WDT   0xfffffd40
+set AT91_GPBR  0xfffffd50
+
+set AT91_USART0        $AT91SAM9261_BASE_US0
+set AT91_USART1        $AT91SAM9261_BASE_US1
+set AT91_USART2        $AT91SAM9261_BASE_US2
+
+
+#
+# Internal Memory.
+#
+set AT91SAM9261_SRAM_BASE      0x00300000      ;# Internal SRAM base address
+set AT91SAM9261_SRAM_SIZE      0x00028000      ;# Internal SRAM size (160Kb)
+
+set AT91SAM9261_ROM_BASE       0x00400000      ;# Internal ROM base address
+set AT91SAM9261_ROM_SIZE       0x00008000      ;# Internal ROM size (32Kb)
+
+set AT91SAM9261_UHP_BASE       0x00500000      ;# USB Host controller
+set AT91SAM9261_LCDC_BASE      0x00600000      ;# LDC controller
+
+#
+# Cpu Name
+#
+set AT91_CPU_NAME      "AT91SAM9261"

diff --git a/tcl/chip/atmel/at91/at91sam9261_matrix.cfg b/tcl/chip/atmel/at91/at91sam9261_matrix.cfg
new file mode 100644 (file)
index 0000000..dc8de23
--- /dev/null
+++ b/tcl/chip/atmel/at91/at91sam9261_matrix.cfg
@@ -0,0 +1,46 @@
+
+set AT91_MATRIX_MCFG   [expr ($AT91_MATRIX + 0x00)]    ;# Master Configuration Register #
+set            AT91_MATRIX_RCB0        [expr (1 << 0)]         ;# Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master)
+set            AT91_MATRIX_RCB1        [expr (1 << 1)]         ;# Remap Command for AHB Master 1 (ARM926EJ-S Data Master)
+
+set AT91_MATRIX_SCFG0  [expr ($AT91_MATRIX + 0x04)]    ;# Slave Configuration Register 0
+set AT91_MATRIX_SCFG1  [expr ($AT91_MATRIX + 0x08)]    ;# Slave Configuration Register 1
+set AT91_MATRIX_SCFG2  [expr ($AT91_MATRIX + 0x0C)]    ;# Slave Configuration Register 2
+set AT91_MATRIX_SCFG3  [expr ($AT91_MATRIX + 0x10)]    ;# Slave Configuration Register 3
+set AT91_MATRIX_SCFG4  [expr ($AT91_MATRIX + 0x14)]    ;# Slave Configuration Register 4
+set            AT91_MATRIX_SLOT_CYCLE          [expr (0xff << 0)]      ;# Maximum Number of Allowed Cycles for a Burst
+set            AT91_MATRIX_DEFMSTR_TYPE        [expr (3    << 16)]     ;# Default Master Type
+set                    AT91_MATRIX_DEFMSTR_TYPE_NONE   [expr (0 << 16)]
+set                    AT91_MATRIX_DEFMSTR_TYPE_LAST   [expr (1 << 16)]
+set                    AT91_MATRIX_DEFMSTR_TYPE_FIXED  [expr (2 << 16)]
+set            AT91_MATRIX_FIXED_DEFMSTR       [expr (7    << 18)]     ;# Fixed Index of Default Master
+
+set AT91_MATRIX_TCR            [expr ($AT91_MATRIX + 0x24)]    ;# TCM Configuration Register
+set            AT91_MATRIX_ITCM_SIZE           [expr (0xf << 0)]       ;# Size of ITCM enabled memory block
+set                    AT91_MATRIX_ITCM_0              [expr (0 << 0)]
+set                    AT91_MATRIX_ITCM_16             [expr (5 << 0)]
+set                    AT91_MATRIX_ITCM_32             [expr (6 << 0)]
+set                    AT91_MATRIX_ITCM_64             [expr (7 << 0)]
+set            AT91_MATRIX_DTCM_SIZE           [expr (0xf << 4)]       ;# Size of DTCM enabled memory block
+set                    AT91_MATRIX_DTCM_0              [expr (0 << 4)]
+set                    AT91_MATRIX_DTCM_16             [expr (5 << 4)]
+set                    AT91_MATRIX_DTCM_32             [expr (6 << 4)]
+set                    AT91_MATRIX_DTCM_64             [expr (7 << 4)]
+
+set AT91_MATRIX_EBICSA [expr ($AT91_MATRIX + 0x30)]    ;# EBI Chip Select Assignment Register
+set            AT91_MATRIX_CS1A                [expr (1 << 1)] ;# Chip Select 1 Assignment
+set                    AT91_MATRIX_CS1A_SMC            [expr (0 << 1)]
+set                    AT91_MATRIX_CS1A_SDRAMC         [expr (1 << 1)]
+set            AT91_MATRIX_CS3A                [expr (1 << 3)] ;# Chip Select 3 Assignment
+set                    AT91_MATRIX_CS3A_SMC            [expr (0 << 3)]
+set                    AT91_MATRIX_CS3A_SMC_SMARTMEDIA [expr (1 << 3)]
+set            AT91_MATRIX_CS4A                [expr (1 << 4)] ;# Chip Select 4 Assignment
+set                    AT91_MATRIX_CS4A_SMC            [expr (0 << 4)]
+set                    AT91_MATRIX_CS4A_SMC_CF1        [expr (1 << 4)]
+set            AT91_MATRIX_CS5A                [expr (1 << 5)] ;# Chip Select 5 Assignment
+set                    AT91_MATRIX_CS5A_SMC            [expr (0 << 5)]
+set                    AT91_MATRIX_CS5A_SMC_CF2        [expr (1 << 5)]
+set            AT91_MATRIX_DBPUC               [expr (1 << 8)] ;# Data Bus Pull-up Configuration
+
+set AT91_MATRIX_USBPUCR        [expr ($AT91_MATRIX + 0x34)]    ;# USB Pad Pull-Up Control Register
+set            AT91_MATRIX_USBPUCR_PUON        [expr (1 << 30)]        ;# USB Device PAD Pull-up Enable