nor/niietcm4: fix indentation

After replace CMD_CTX with CMD, the indentation is incorrect.
Fix it.

This change was part of http://openocd.zylin.com/1815 from Paul
Fertser and has been extracted and rebased to simplify the review.

Change-Id: I5d7c40227ceda2e9db8dab88088d74012d2254c4
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5082
Tested-by: jenkins

diff --git a/src/flash/nor/niietcm4.c b/src/flash/nor/niietcm4.c
index 62549f206baf9a79dbabe1a366f27b8748f291b1..7b67bb8ad24d719e321c3b6b7a87a735bd5f5340 100644 (file)
--- a/src/flash/nor/niietcm4.c
+++ b/src/flash/nor/niietcm4.c
@@ -426,8 +426,8 @@ COMMAND_HANDLER(niietcm4_handle_uflash_read_byte_command)
        if (retval != ERROR_OK)
                return retval;
        command_print(CMD,  "Read userflash %s region:\n"
-                                                       "address = 0x%04x,\n"
-                                                       "value   = 0x%02x.", CMD_ARGV[0], uflash_addr, uflash_data);
+                                               "address = 0x%04x,\n"
+                                               "value   = 0x%02x.", CMD_ARGV[0], uflash_addr, uflash_data);
        return retval;
 }
 
@@ -468,9 +468,9 @@ COMMAND_HANDLER(niietcm4_handle_uflash_write_byte_command)
        int page_num = uflash_addr/USERFLASH_PAGE_SIZE;
 
        command_print(CMD, "Write userflash %s region:\n"
-                                                  "address = 0x%04x,\n"
-                                                  "value   = 0x%02x.\n"
-                                                  "Please wait ... ", CMD_ARGV[0], uflash_addr, uflash_data);
+                                          "address = 0x%04x,\n"
+                                          "value   = 0x%02x.\n"
+                                          "Please wait ... ", CMD_ARGV[0], uflash_addr, uflash_data);
        /* dump */
        uint32_t uflash_dump[USERFLASH_PAGE_SIZE];
        niietcm4_dump_uflash_page(bank, uflash_dump, page_num, mem_type);
@@ -815,10 +815,10 @@ COMMAND_HANDLER(niietcm4_handle_extmem_cfg_command)
                return ERROR_COMMAND_SYNTAX_ERROR;
 
        command_print(CMD,  "Try to configure external memory boot interface:\n"
-                                                       "port = %s\n"
-                                                       "pin  = %s\n"
-                                                       "func = %s\n"
-                                                       "Please wait ...", CMD_ARGV[0], CMD_ARGV[1], CMD_ARGV[2]);
+                                               "port = %s\n"
+                                               "pin  = %s\n"
+                                               "func = %s\n"
+                                               "Please wait ...", CMD_ARGV[0], CMD_ARGV[1], CMD_ARGV[2]);
        /* dump */
        uint32_t uflash_dump[USERFLASH_PAGE_SIZE];
        niietcm4_dump_uflash_page(bank, uflash_dump, 0, 1);