remove more duplication

Not sure how the original "move code to adi_v5_swd.c" patch left
some code in the "arm_adi_v5.c" file, but a recent patch was only
a partial fix -- it didn't remove all the duplication.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c
index 4afd50cb5a824a1b06641850bf45acac063bafb3..01c274b3bfcfd22a268d7915e221832d43995661 100644 (file)
--- a/src/target/arm_adi_v5.c
+++ b/src/target/arm_adi_v5.c
@@ -1572,28 +1572,3 @@ const struct command_registration dap_command_handlers[] = {
 };
 
 
-/*
- * This represents the bits which must be sent out on TMS/SWDIO to
- * switch a DAP implemented using an SWJ-DP module into SWD mode.
- * These bits are stored (and transmitted) LSB-first.
- *
- * See the DAP-Lite specification, section 2.2.5 for information
- * about making the debug link select SWD or JTAG.  (Similar info
- * is in a few other ARM documents.)
- */
-static const uint8_t jtag2swd_bitseq[] = {
-       /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
-        * putting both JTAG and SWD logic into reset state.
-        */
-       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-       /* Switching sequence enables SWD and disables JTAG
-        * NOTE: bits in the DP's IDCODE may expose the need for
-        * an old/deprecated sequence (0xb6 0xed).
-        */
-       0x9e, 0xe7,
-       /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
-        * putting both JTAG and SWD logic into reset state.
-        */
-       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-};
-