source archive release.
JTAG Layer:
- * add debug level 4 for verbose I/O debug
- * bitbang, add read buffer to improve performance
- * Cadence SystemVerilog Direct Programming Interface (DPI) adapter driver
- * CMSIS-DAP v2 (USB bulk based) adapter driver
- * Cypress KitProg adapter driver
- * FTDI FT232R sync bitbang adapter driver
- * Linux GPIOD bitbang adapter driver through libgpiod
- * Mellanox rshim USB or PCIe adapter driver
- * Nuvoton Nu-Link and Nu-Link2 adapter drivers
- * NXP IMX GPIO mmap based adapter driver
- * ST-Link consolidate all versions in single config
- * ST-Link read properly old USB serial numbers
- * STLink/V3 support (for ST devices only !)
- * STM8 SWIM transport
- * TI XDS110 adapter driver
- * Xilinx XVC/PCIe adapter driver
Boundary Scan:
Target Layer:
- * 64 bit address support
- * ARCv2 target support
- * ARM Cortex-A hypervisor mode support
- * ARM Cortex-M fast PC sampling support for profiling
- * ARM generic CTI support
- * ARM generic mem-ap target support
- * ARMv7-A MMU tools
- * ARMv7m traces add TCP stream server
- * ARMv8 AARCH64 target support and semihosting support
- * ARMv8 AARCH64 disassembler support through capstone library
- * ARMv8-M target support
- * EnSilica eSi-RISC target support, including instruction tracing
- eSi-Trace support
- * MIPS64 target support
- * Motorola SREC S6 record image file support
- * RISC-V target support
- * SEGGER Real Time Transfer (RTT) initial support (for single target,
- Cortex-M only)
- * ST STM8 target support
- * Various MIPS32 target improvements
Flash Layer:
- * Atheros (ath79) SPI interface support
- * Atmel atmega128rfa1 support
- * Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support
- * Atmel SAMC2?N* support
- * Cypress PSoC5LP, PSoC6 support
- * EnSilica eSi-RISC support
- * Foshan Synwit Tech SWM050 support
- * Maxim Integrated MAX32XXX support
- * Nordic Semiconductor nRF51822, nRF52810, nRF52832 support
- * NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support
- * Renesas RPC HF support
- * SH QSPI support
- * SiFive Freedom E support
- * Silicon Labs EFR-family, EZR32HG support
- * ST BlueNRG support
- * ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and EEPROM
- * ST STM32F72x, STM32F4x3, STM32H7xx support
- * ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support
- * ST STM32L5x support (non secure mode)
- * TI CC13xx, CC26xx, CC32xx support
- * TI MSP432 support
- * Winner Micro w600 support
- * Xilinx XCF platform support
- * Various discrete SPI NOR flashes support
Board, Target, and Interface Configuration Scripts:
- * 8devices LIMA board config
- * Achilles Instant-Development Kit Arria 10 board config
- * Amazon Kindle 2 and DX board config
- * Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config
- * Andes Technology ADP-XC7KFF676 board config
- * Andes Technology Corvette-F1 board config
- * ARM Musca A board config
- * Arty Spartan 7 FPGA board config
- * Atmel SAMD10 Xplained mini board config
- * Atmel SAMD11 Xplained Pro board config
- * Atmel SAM G55 Xplained Pro board config
- * AVNET UltraZED EG StarterKit board config
- * Blue Pill STM32F103C8 board config
- * DP Busblaster v4.1a board config
- * DPTechnics DPT-Board-v1 board config
- * Emcraft imx8 SOM BSB board config
- * Globalscale ESPRESSObin board config
- * Kasli board config
- * Kintex Ultrascale XCKU040 board config
- * Knovative KC-100 board config
- * LeMaker HiKey board config
- * Microchip (Atmel) SAME54 Xplained Pro board config
- * Microchip (Atmel) SAML11 Xplained Pro board config
- * Nordic module NRF52 board config
- * Numato Lab Mimas A7 board config
- * NXP Freedom FRDM-LS1012A board config
- * NXP IMX7SABRE board config
- * NXP IMX8MP-EVK board config
- * NXP MC-IMX8M-EVK board config
- * QuickLogic QuickFeather board config
- * Renesas R-Car E2, H2, M2 board config
- * Renesas R-Car Salvator-X(S) board config
- * Renesas RZ/A1H GR-Peach board config
- * Rigado BMD-300 board config
- * Sayma AMC board config
- * Sifive e31arty, e51arty, hifive1 board config
- * ST B-L475E-IOT01A board config
- * ST BlueNRG idb007v1, idb008v1, idb011v1 board config
- * ST STM32F412g discovery board config
- * ST STM32F413h discovery board config
- * ST STM32F469i discovery board config
- * ST STM32F7 Nucleo board config
- * ST STM32F723e discovery board config
- * ST STM32F746g discovery board config
- * ST STM32F769i discovery board config
- * ST STM32H735g discovery board config
- * ST STM32H743zi Nucleo board config
- * ST STM32H745i discovery board config
- * ST STM32H747i discovery board config
- * ST STM32H750b discovery board config
- * ST STM32H7b3i discovery board config
- * ST STM32H7x_dual_qspi board config
- * ST STM32H7x3i Eval boards config
- * ST STM32L073 Nucleo board config
- * ST STM32L476g discovery board config
- * ST STM32L496g discovery board config
- * ST STM32L4p5g discovery board config
- * ST STM32L4r9i discovery board config
- * ST STM32L5 Nucleo board config
- * ST STM32MP15x DK2 board config
- * ST STM32WB Nucleo board config
- * ST STM8L152R8 Nucleo board config
- * Synopsys DesignWare ARC EM board config
- * Synopsys DesignWare ARC HSDK board config
- * TI BeagleBone family boards config
- * TI CC13xx, CC26xx, CC32xx LaunchPad board config
- * TI MSP432 LaunchPad board config
- * Tocoding Poplar board config
- * TP-Link WDR4300 board config
- * Allwinner V3s target config
- * Andes Technology NDS V5 target config
- * Atmel atmega128rfa1 target config
- * ARM corelink SSE-200 target config
- * Atheros_ar9344 target config
- * Cypress PSoC5LP, PSoC6 target config
- * EnSilica eSi-RISC target config
- * Foshan Synwit Tech SWM050 target config
- * GigaDevice GD32VF103 target config
- * Hisilicon Hi3798 target config
- * Hisilicon Hi6220 target config
- * Infineon TLE987x target config
- * Marvell Armada 3700 target config
- * Maxim Integrated MAX32XXX target config
- * Mellanox BlueField target config
- * Microchip (Atmel) SAME5x, SAML1x target config
- * NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config
- * NXP Kinetis KE1xZ, KE1xF target config
- * NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config
- * Qualcomm QCA4531 target config
- * QuickLogic EOS S3 target config
- * Renesas R-Car E2, H2, M2 target config
- * Renesas R-Car Gen3 target config
- * Renesas RZ/A1H target config
- * Rockchip RK3308 target config
- * ST BlueNRG target config
- * ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config
- * ST STM32MP15x target config
- * ST STM32WBx, STM32WLEx target config
- * ST STM8L152, S003, S103, S105 target config
- * Synopsys DesignWare ARC EM target config
- * Synopsys DesignWare ARC HS Development Kit SoC target config
- * TI CC13xx, CC26xx, CC32xx target config
- * TI TNETC4401 target config
- * Xilinx UltraScale+ target config
- * Altera 5M570Z (MAXV family) CPLD config
- * Xilinx Ultrascale, XCF CPLD config
- * Intel (Altera) Arria10 FPGA config
- * Cadence SystemVerilog Direct Programming Interface (DPI) interface config
- * Cypress KitProg interface config
- * Digilent SMT2 NC interface config
- * DLN-2 example of Linux GPIOD interface config
- * FTDI C232HM interface config
- * HIE JTAG Debugger interface config
- * In-Circuit's ICprog interface config
- * isodebug isolated JTAG/SWD+UART interface config
- * Mellanox rshim USB or PCIe interface config
- * Nuvoton Nu-Link interface config
- * NXP IMX GPIO mmap based interface config
- * Steppenprobe open hardware interface config
- * TI XDS110 interface config
Server Layer:
- * 64 bit address support
- * default bind to IPv4 localhost
- * gdb: allow multiple connections
- * gdb: architecture element support
- * gdb: vCont, vRun support
- * telnet: handle Ctrl+A, Ctrl+E and Ctrl+K
RTOS:
- * Chromium-EC rtos support
- * hwthread pseudo rtos support
- * NuttX rtos support
- * RIOT rtos support
Documentation:
- * Improve STM32 flash driver
- * Various typo fix and improvements
Build and Release:
- * Add libutil to support jimtcl version 0.80
- * Clang warning fixes
- * GitHub workflow for Win32 snapshot binaries
- * Handle Tcl return values consistently
- * Mitigation for CVE-2018-5704: Prevent some forms of Cross
- Protocol Scripting attacks
- * Support for libftdi 1.5
- * Travis-CI basic support
- * Update libjaylink to version 0.2.0
- * Update jimtcl to version 0.79
- * Use external (optional) library capstone for ARM and AARCH64 disassembly
This release also contains a number of other important functional and
cosmetic bugfixes. For more details about what has changed since the
last release, see the git repository history:
-http://sourceforge.net/p/openocd/code/ci/v0.11.0/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=
For older NEWS, see the NEWS files associated with each release
--- /dev/null
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
+
+JTAG Layer:
+ * add debug level 4 for verbose I/O debug
+ * bitbang, add read buffer to improve performance
+ * Cadence SystemVerilog Direct Programming Interface (DPI) adapter driver
+ * CMSIS-DAP v2 (USB bulk based) adapter driver
+ * Cypress KitProg adapter driver
+ * FTDI FT232R sync bitbang adapter driver
+ * Linux GPIOD bitbang adapter driver through libgpiod
+ * Mellanox rshim USB or PCIe adapter driver
+ * Nuvoton Nu-Link and Nu-Link2 adapter drivers
+ * NXP IMX GPIO mmap based adapter driver
+ * ST-Link consolidate all versions in single config
+ * ST-Link read properly old USB serial numbers
+ * STLink/V3 support (for ST devices only !)
+ * STM8 SWIM transport
+ * TI XDS110 adapter driver
+ * Xilinx XVC/PCIe adapter driver
+
+Boundary Scan:
+
+Target Layer:
+ * 64 bit address support
+ * ARCv2 target support
+ * ARM Cortex-A hypervisor mode support
+ * ARM Cortex-M fast PC sampling support for profiling
+ * ARM generic CTI support
+ * ARM generic mem-ap target support
+ * ARMv7-A MMU tools
+ * ARMv7m traces add TCP stream server
+ * ARMv8 AARCH64 target support and semihosting support
+ * ARMv8 AARCH64 disassembler support through capstone library
+ * ARMv8-M target support
+ * EnSilica eSi-RISC target support, including instruction tracing
+ eSi-Trace support
+ * MIPS64 target support
+ * Motorola SREC S6 record image file support
+ * RISC-V target support
+ * SEGGER Real Time Transfer (RTT) initial support (for single target,
+ Cortex-M only)
+ * ST STM8 target support
+ * Various MIPS32 target improvements
+
+Flash Layer:
+ * Atheros (ath79) SPI interface support
+ * Atmel atmega128rfa1 support
+ * Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support
+ * Atmel SAMC2?N* support
+ * Cypress PSoC5LP, PSoC6 support
+ * EnSilica eSi-RISC support
+ * Foshan Synwit Tech SWM050 support
+ * Maxim Integrated MAX32XXX support
+ * Nordic Semiconductor nRF51822, nRF52810, nRF52832 support
+ * NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support
+ * Renesas RPC HF support
+ * SH QSPI support
+ * SiFive Freedom E support
+ * Silicon Labs EFR-family, EZR32HG support
+ * ST BlueNRG support
+ * ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and EEPROM
+ * ST STM32F72x, STM32F4x3, STM32H7xx support
+ * ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support
+ * ST STM32L5x support (non secure mode)
+ * TI CC13xx, CC26xx, CC32xx support
+ * TI MSP432 support
+ * Winner Micro w600 support
+ * Xilinx XCF platform support
+ * Various discrete SPI NOR flashes support
+
+Board, Target, and Interface Configuration Scripts:
+ * 8devices LIMA board config
+ * Achilles Instant-Development Kit Arria 10 board config
+ * Amazon Kindle 2 and DX board config
+ * Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config
+ * Andes Technology ADP-XC7KFF676 board config
+ * Andes Technology Corvette-F1 board config
+ * ARM Musca A board config
+ * Arty Spartan 7 FPGA board config
+ * Atmel SAMD10 Xplained mini board config
+ * Atmel SAMD11 Xplained Pro board config
+ * Atmel SAM G55 Xplained Pro board config
+ * AVNET UltraZED EG StarterKit board config
+ * Blue Pill STM32F103C8 board config
+ * DP Busblaster v4.1a board config
+ * DPTechnics DPT-Board-v1 board config
+ * Emcraft imx8 SOM BSB board config
+ * Globalscale ESPRESSObin board config
+ * Kasli board config
+ * Kintex Ultrascale XCKU040 board config
+ * Knovative KC-100 board config
+ * LeMaker HiKey board config
+ * Microchip (Atmel) SAME54 Xplained Pro board config
+ * Microchip (Atmel) SAML11 Xplained Pro board config
+ * Nordic module NRF52 board config
+ * Numato Lab Mimas A7 board config
+ * NXP Freedom FRDM-LS1012A board config
+ * NXP IMX7SABRE board config
+ * NXP IMX8MP-EVK board config
+ * NXP MC-IMX8M-EVK board config
+ * QuickLogic QuickFeather board config
+ * Renesas R-Car E2, H2, M2 board config
+ * Renesas R-Car Salvator-X(S) board config
+ * Renesas RZ/A1H GR-Peach board config
+ * Rigado BMD-300 board config
+ * Sayma AMC board config
+ * Sifive e31arty, e51arty, hifive1 board config
+ * ST B-L475E-IOT01A board config
+ * ST BlueNRG idb007v1, idb008v1, idb011v1 board config
+ * ST STM32F412g discovery board config
+ * ST STM32F413h discovery board config
+ * ST STM32F469i discovery board config
+ * ST STM32F7 Nucleo board config
+ * ST STM32F723e discovery board config
+ * ST STM32F746g discovery board config
+ * ST STM32F769i discovery board config
+ * ST STM32H735g discovery board config
+ * ST STM32H743zi Nucleo board config
+ * ST STM32H745i discovery board config
+ * ST STM32H747i discovery board config
+ * ST STM32H750b discovery board config
+ * ST STM32H7b3i discovery board config
+ * ST STM32H7x_dual_qspi board config
+ * ST STM32H7x3i Eval boards config
+ * ST STM32L073 Nucleo board config
+ * ST STM32L476g discovery board config
+ * ST STM32L496g discovery board config
+ * ST STM32L4p5g discovery board config
+ * ST STM32L4r9i discovery board config
+ * ST STM32L5 Nucleo board config
+ * ST STM32MP15x DK2 board config
+ * ST STM32WB Nucleo board config
+ * ST STM8L152R8 Nucleo board config
+ * Synopsys DesignWare ARC EM board config
+ * Synopsys DesignWare ARC HSDK board config
+ * TI BeagleBone family boards config
+ * TI CC13xx, CC26xx, CC32xx LaunchPad board config
+ * TI MSP432 LaunchPad board config
+ * Tocoding Poplar board config
+ * TP-Link WDR4300 board config
+ * Allwinner V3s target config
+ * Andes Technology NDS V5 target config
+ * Atmel atmega128rfa1 target config
+ * ARM corelink SSE-200 target config
+ * Atheros_ar9344 target config
+ * Cypress PSoC5LP, PSoC6 target config
+ * EnSilica eSi-RISC target config
+ * Foshan Synwit Tech SWM050 target config
+ * GigaDevice GD32VF103 target config
+ * Hisilicon Hi3798 target config
+ * Hisilicon Hi6220 target config
+ * Infineon TLE987x target config
+ * Marvell Armada 3700 target config
+ * Maxim Integrated MAX32XXX target config
+ * Mellanox BlueField target config
+ * Microchip (Atmel) SAME5x, SAML1x target config
+ * NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config
+ * NXP Kinetis KE1xZ, KE1xF target config
+ * NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config
+ * Qualcomm QCA4531 target config
+ * QuickLogic EOS S3 target config
+ * Renesas R-Car E2, H2, M2 target config
+ * Renesas R-Car Gen3 target config
+ * Renesas RZ/A1H target config
+ * Rockchip RK3308 target config
+ * ST BlueNRG target config
+ * ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config
+ * ST STM32MP15x target config
+ * ST STM32WBx, STM32WLEx target config
+ * ST STM8L152, S003, S103, S105 target config
+ * Synopsys DesignWare ARC EM target config
+ * Synopsys DesignWare ARC HS Development Kit SoC target config
+ * TI CC13xx, CC26xx, CC32xx target config
+ * TI TNETC4401 target config
+ * Xilinx UltraScale+ target config
+ * Altera 5M570Z (MAXV family) CPLD config
+ * Xilinx Ultrascale, XCF CPLD config
+ * Intel (Altera) Arria10 FPGA config
+ * Cadence SystemVerilog Direct Programming Interface (DPI) interface config
+ * Cypress KitProg interface config
+ * Digilent SMT2 NC interface config
+ * DLN-2 example of Linux GPIOD interface config
+ * FTDI C232HM interface config
+ * HIE JTAG Debugger interface config
+ * In-Circuit's ICprog interface config
+ * isodebug isolated JTAG/SWD+UART interface config
+ * Mellanox rshim USB or PCIe interface config
+ * Nuvoton Nu-Link interface config
+ * NXP IMX GPIO mmap based interface config
+ * Steppenprobe open hardware interface config
+ * TI XDS110 interface config
+
+Server Layer:
+ * 64 bit address support
+ * default bind to IPv4 localhost
+ * gdb: allow multiple connections
+ * gdb: architecture element support
+ * gdb: vCont, vRun support
+ * telnet: handle Ctrl+A, Ctrl+E and Ctrl+K
+
+RTOS:
+ * Chromium-EC rtos support
+ * hwthread pseudo rtos support
+ * NuttX rtos support
+ * RIOT rtos support
+
+Documentation:
+ * Improve STM32 flash driver
+ * Various typo fix and improvements
+
+Build and Release:
+ * Add libutil to support jimtcl version 0.80
+ * Clang warning fixes
+ * GitHub workflow for Win32 snapshot binaries
+ * Handle Tcl return values consistently
+ * Mitigation for CVE-2018-5704: Prevent some forms of Cross
+ Protocol Scripting attacks
+ * Support for libftdi 1.5
+ * Travis-CI basic support
+ * Update libjaylink to version 0.2.0
+ * Update jimtcl to version 0.79
+ * Use external (optional) library capstone for ARM and AARCH64 disassembly
+
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.11.0/log/?path=
+
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
+
+For more information about contributing test reports, bug fixes, or new
+features and device support, please read the new Developer Manual (or
+the BUGS and PATCHES.txt files in the source archive).
AC_PREREQ(2.64)
-AC_INIT([openocd], [0.11.0],
+AC_INIT([openocd], [0.11.0+dev],
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
AC_CONFIG_SRCDIR([src/openocd.c])
AC_CONFIG_AUX_DIR([.])
projects / fw / openocd / commitdiff