There are still few adapter_khz, ftdi_location, jtag_nsrst_delay
and xds110_serial strolling around ...
Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6270
Tested-by: jenkins
# https://raw.githubusercontent.com/dergraaf/busblaster_v4/master/ktlink/ktlink.svf
#
# To reprogram the on-board CPLD do:
-# openocd -f board/dp_busblaster_v4.cfg -c "adapter_khz 1000; init; svf <path_to_svf>; shutdown"
+# openocd -f board/dp_busblaster_v4.cfg -c "adapter speed 1000; init; svf <path_to_svf>; shutdown"
#
source [find interface/ftdi/dp_busblaster.cfg]
jtag_rclk 1000
$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
-#jtag_nsrst_delay 200
+#adapter srst delay 200
#jtag_ntrst_delay 200
$_TARGETNAME configure -event "reset-assert" {
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0008 0x000b
-# ftdi_location 1:8
+# adapter usb location 1:8
reset_config none
transport select jtag
# ADP-Corvette-F1 R2.0
# http://www.andestech.com/en/products-solutions/andeshape-platforms/corvette-f1-r2/
-adapter_khz 10000
+adapter speed 10000
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
# Use this to distinguish multiple boards by topology
-#ftdi_location 5:1
+#adapter usb location 5:1
# sampling on falling edge generally seems to work and accelerates things but
# is not fully tested
#ftdi_tdo_sample_edge falling
#
source [find interface/ftdi/snps_sdp.cfg]
-adapter_khz 10000
+adapter speed 10000
# ARCs supports only JTAG.
transport select jtag
# Use serial number option to use a specific XDS110
# when more than one are connected to the host.
-#xds110_serial 00000000
+#xds110 serial 00000000