tcl: Add support for NDS V5 target and xc7/Corvette-F1

The "Corvette-F1" is an Arduino-compatible evaluation platform,
which fully supports AndesCore. The board has FTDI FT2232 to
connected to FPGA's JTAG interface.

The "ADP-XC7KFF676" is a development and prototyping board that
provides capacity for evaluation of AndesCore processors.
It works with AICE in-circuit debugging tools.

This patch also include target/nds32v5.cfg to support AndesCore
N22/N25F and AndeShape Platform AE250.

Change-Id: I144d5063d5086d00ec44634a5028b5ea5d2eba33
Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com>
Reviewed-on: http://openocd.zylin.com/5338
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

diff --git a/tcl/board/nds32_corvettef1.cfg b/tcl/board/nds32_corvettef1.cfg
new file mode 100644 (file)
index 0000000..1a3782c
--- /dev/null
+++ b/tcl/board/nds32_corvettef1.cfg
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# ADP-Corvette-F1 R1.0
+# http://www.andestech.com/en/products-solutions/andeshape-platforms/corvette-f1-r1/
+# ADP-Corvette-F1 R2.0
+# http://www.andestech.com/en/products-solutions/andeshape-platforms/corvette-f1-r2/
+
+adapter_khz     10000
+
+adapter driver ftdi
+ftdi_device_desc "Dual RS232-HS"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0c08 0x0f1b
+ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
+ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
+reset_config srst_only
+
+source [find target/nds32v5.cfg]

diff --git a/tcl/board/nds32_xc7.cfg b/tcl/board/nds32_xc7.cfg
new file mode 100644 (file)
index 0000000..82c00ac
--- /dev/null
+++ b/tcl/board/nds32_xc7.cfg
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# ADP-XC7K160/410
+# http://www.andestech.com/en/products-solutions/andeshape-platforms/adp-xc7k160-410/
+
+source [find target/nds32v5.cfg]

diff --git a/tcl/target/nds32v5.cfg b/tcl/target/nds32v5.cfg
new file mode 100644 (file)
index 0000000..56b5fed
--- /dev/null
+++ b/tcl/target/nds32v5.cfg
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Andes Core
+#
+# http://www.andestech.com
+#
+
+set _CHIPNAME nds
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x1000563D
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME riscv -chain-position $_TARGETNAME