doc: document CMSIS-DAP v2

Change-Id: Ie54e855901c079b456c26a6239177c7678cdcac7
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5930
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 84ed320602841e045eefe748c1134ce7d5c8b9df..292bbd77c0a84d3f3e3882c6f868f22d6624ea70 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2429,7 +2429,8 @@ and a specific set of GPIOs is used.
 @end deffn
 
 @deffn {Interface Driver} {cmsis-dap}
-ARM CMSIS-DAP compliant based adapter.
+ARM CMSIS-DAP compliant based adapter v1 (USB HID based)
+or v2 (USB bulk).
 
 @deffn {Config Command} {cmsis_dap_vid_pid} [vid pid]+
 The vendor ID and product ID of the CMSIS-DAP device. If not specified
@@ -2445,6 +2446,23 @@ Specifies the @var{serial} of the CMSIS-DAP device to use.
 If not specified, serial numbers are not considered.
 @end deffn
 
+@deffn {Config Command} {cmsis_dap_backend} [@option{auto}|@option{usb_bulk}|@option{hid}]
+Specifies how to communicate with the adapter:
+
+@itemize @minus
+@item @option{hid} Use HID generic reports - CMSIS-DAP v1
+@item @option{usb_bulk} Use USB bulk - CMSIS-DAP v2
+@item @option{auto} First try USB bulk CMSIS-DAP v2, if not found try HID CMSIS-DAP v1.
+This is the default if @command{cmsis_dap_backend} is not specified.
+@end itemize
+@end deffn
+
+@deffn {Config Command} {cmsis_dap_usb interface} [number]
+Specifies the @var{number} of the USB interface to use in v2 mode (USB bulk).
+In most cases need not to be specified and interfaces are searched by
+interface string or for user class interface.
+@end deffn
+
 @deffn {Command} {cmsis-dap info}
 Display various device information, like hardware version, firmware version, current bus status.
 @end deffn