arm_adi_v5: Split ahbap_debugport_init
authorAndreas Fritiofson <andreas.fritiofson@gmail.com>
Sun, 6 Dec 2015 13:04:24 +0000 (14:04 +0100)
committerAndreas Fritiofson <andreas.fritiofson@gmail.com>
Tue, 29 Dec 2015 20:29:46 +0000 (20:29 +0000)
This function does two separate things, powering up the DP and setting
up a MEM-AP. But the DP needs to be powered before even searching for a
MEM-AP to initialize and targets may have multiple MEM-APs that need
initializing.

Split the function into dap_dp_init() and mem_ap_init() and change all
call sites to use the appropriate one.

Change-Id: I92f55e09754a93f3f01dd8e5aa1ffdf60c856126
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3151
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
src/target/adi_v5_swd.c
src/target/arm_adi_v5.c
src/target/arm_adi_v5.h
src/target/cortex_a.c
src/target/cortex_m.c

index f83214229bfa65dd2e8f01c45d5d5e4fe3d0482e..9bd1f93e62c2532e6b702d13ca12b3d902fe0d93 100644 (file)
@@ -112,7 +112,9 @@ static int swd_connect(struct adiv5_dap *dap)
        /* Note, debugport_init() does setup too */
        jtag_interface->swd->switch_seq(JTAG_TO_SWD);
 
+       /* Make sure we don't try to perform any other accesses before the DPIDR read. */
        dap->do_reconnect = false;
+       dap->dp_bank_value = 0;
 
        swd_queue_dp_read(dap, DP_IDCODE, &idcode);
 
index 5d55d516114f5e3c9a264843c81df7db1c8958e9..0cc1b5c10e3a711d2cb43d6378884c22e93aa2a1 100644 (file)
@@ -645,45 +645,33 @@ struct adiv5_dap *dap_init(void)
                /* Number of bits for tar autoincrement, impl. dep. at least 10 */
                dap->ap[i].tar_autoincr_block = (1<<10);
        }
+       dap->ap_current = -1;
+       dap->ap_bank_value = -1;
+       dap->dp_bank_value = -1;
        return dap;
 }
 
 /**
  * Initialize a DAP.  This sets up the power domains, prepares the DP
- * for further use, and arranges to use AP #0 for all AP operations
- * until dap_ap-select() changes that policy.
+ * for further use and activates overrun checking.
  *
  * @param dap The DAP being initialized.
- *
- * @todo Rename this.  We also need an initialization scheme which account
- * for SWD transports not just JTAG; that will need to address differences
- * in layering.  (JTAG is useful without any debug target; but not SWD.)
- * And this may not even use an AHB-AP ... e.g. DAP-Lite uses an APB-AP.
  */
-int ahbap_debugport_init(struct adiv5_ap *ap)
+int dap_dp_init(struct adiv5_dap *dap)
 {
-       /* check that we support packed transfers */
-       uint32_t csw, cfg;
        int retval;
-       struct adiv5_dap *dap = ap->dap;
 
        LOG_DEBUG(" ");
-
        /* JTAG-DP or SWJ-DP, in JTAG mode
         * ... for SWD mode this is patched as part
         * of link switchover
+        * FIXME: This should already be setup by the respective transport specific DAP creation.
         */
        if (!dap->ops)
                dap->ops = &jtag_dp_ops;
 
-       /* Default MEM-AP setup.
-        *
-        * REVISIT AP #0 may be an inappropriate default for this.
-        * Should we probe, or take a hint from the caller?
-        * Presumably we can ignore the possibility of multiple APs.
-        */
        dap->ap_current = -1;
-       dap_ap_select(dap, ap->ap_num);
+       dap->ap_bank_value = -1;
        dap->last_read = NULL;
 
        for (size_t i = 0; i < 10; i++) {
@@ -726,6 +714,7 @@ int ahbap_debugport_init(struct adiv5_ap *ap)
                retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
                if (retval != ERROR_OK)
                        continue;
+
                /* With debug power on we can activate OVERRUN checking */
                dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
                retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
@@ -735,18 +724,6 @@ int ahbap_debugport_init(struct adiv5_ap *ap)
                if (retval != ERROR_OK)
                        continue;
 
-               retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
-               if (retval != ERROR_OK)
-                       continue;
-
-               retval = dap_queue_ap_read(dap, MEM_AP_REG_CSW, &csw);
-               if (retval != ERROR_OK)
-                       continue;
-
-               retval = dap_queue_ap_read(dap, MEM_AP_REG_CFG, &cfg);
-               if (retval != ERROR_OK)
-                       continue;
-
                retval = dap_run(dap);
                if (retval != ERROR_OK)
                        continue;
@@ -754,6 +731,38 @@ int ahbap_debugport_init(struct adiv5_ap *ap)
                break;
        }
 
+       return retval;
+}
+
+/**
+ * Initialize a DAP.  This sets up the power domains, prepares the DP
+ * for further use, and arranges to use AP #0 for all AP operations
+ * until dap_ap-select() changes that policy.
+ *
+ * @param ap The MEM-AP being initialized.
+ */
+int mem_ap_init(struct adiv5_ap *ap)
+{
+       /* check that we support packed transfers */
+       uint32_t csw, cfg;
+       int retval;
+       struct adiv5_dap *dap = ap->dap;
+
+       dap_ap_select(dap, ap->ap_num);
+
+       retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
+       if (retval != ERROR_OK)
+               return retval;
+
+       retval = dap_queue_ap_read(dap, MEM_AP_REG_CSW, &csw);
+       if (retval != ERROR_OK)
+               return retval;
+
+       retval = dap_queue_ap_read(dap, MEM_AP_REG_CFG, &cfg);
+       if (retval != ERROR_OK)
+               return retval;
+
+       retval = dap_run(dap);
        if (retval != ERROR_OK)
                return retval;
 
index faf725fca816c52c19d2e9f0569ef6eca186f245..8672036fa3fdff9a2a23bcf6af56897beb6dcb5e 100644 (file)
@@ -488,7 +488,8 @@ int mem_ap_sel_write_buf_noincr(struct adiv5_ap *ap,
 struct adiv5_dap *dap_init(void);
 
 /* Initialisation of the debug system, power domains and registers */
-int ahbap_debugport_init(struct adiv5_ap *ap);
+int dap_dp_init(struct adiv5_dap *dap);
+int mem_ap_init(struct adiv5_ap *ap);
 
 /* Probe the AP for ROM Table location */
 int dap_get_debugbase(struct adiv5_ap *ap,
index f95985a746c8d0f51e14dd9df967d39fa5c3b920..0923f880c0c1eccff9bee989eaddd4a9857dc15c 100644 (file)
@@ -2910,6 +2910,12 @@ static int cortex_a_examine_first(struct target *target)
        int retval = ERROR_OK;
        uint32_t didr, ctypr, ttypr, cpuid, dbg_osreg;
 
+       retval = dap_dp_init(swjdp);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("Could not initialize the debug port");
+               return retval;
+       }
+
        /* Search for the APB-AB - it is needed for access to debug registers */
        retval = dap_find_ap(swjdp, AP_TYPE_APB_AP, &armv7a->debug_ap);
        if (retval != ERROR_OK) {
@@ -2917,24 +2923,28 @@ static int cortex_a_examine_first(struct target *target)
                return retval;
        }
 
-       /* We do one extra read to ensure DAP is configured,
-        * we call ahbap_debugport_init(swjdp) instead
-        */
-       retval = ahbap_debugport_init(armv7a->debug_ap);
-       if (retval != ERROR_OK)
+       retval = mem_ap_init(armv7a->debug_ap);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("Could not initialize the APB-AP");
                return retval;
+       }
 
-       /* Search for the AHB-AB */
+       /* Search for the AHB-AB.
+        * REVISIT: We should search for AXI-AP as well and make sure the AP's MEMTYPE says it
+        * can access system memory. */
+       armv7a->memory_ap_available = false;
        retval = dap_find_ap(swjdp, AP_TYPE_AHB_AP, &armv7a->memory_ap);
-       if (retval != ERROR_OK) {
+       if (retval == ERROR_OK) {
+               retval = mem_ap_init(armv7a->memory_ap);
+               if (retval == ERROR_OK)
+                       armv7a->memory_ap_available = true;
+               else
+                       LOG_WARNING("Could not initialize AHB-AP for memory access - using APB-AP");
+       } else {
                /* AHB-AP not found - use APB-AP */
                LOG_DEBUG("Could not find AHB-AP - using APB-AP for memory access");
-               armv7a->memory_ap_available = false;
-       } else {
-               armv7a->memory_ap_available = true;
        }
 
-
        if (!target->dbgbase_set) {
                uint32_t dbgbase;
                /* Get ROM Table base */
index d92cfce2b1493549afa9b1d71cf972af049f9027..ca230f370dda46301d5952f04a361c61eb5f52c1 100644 (file)
@@ -1063,7 +1063,7 @@ static int cortex_m_assert_reset(struct target *target)
                if (retval != ERROR_OK)
                        LOG_DEBUG("Ignoring AP write error right after reset");
 
-               retval = ahbap_debugport_init(armv7m->debug_ap);
+               retval = dap_dp_init(armv7m->debug_ap->dap);
                if (retval != ERROR_OK) {
                        LOG_ERROR("DP initialisation failed");
                        return retval;
@@ -1109,7 +1109,7 @@ static int cortex_m_deassert_reset(struct target *target)
 
        if ((jtag_reset_config & RESET_HAS_SRST) &&
            !(jtag_reset_config & RESET_SRST_NO_GATING)) {
-               int retval = ahbap_debugport_init(armv7m->debug_ap);
+               int retval = dap_dp_init(armv7m->debug_ap->dap);
                if (retval != ERROR_OK) {
                        LOG_ERROR("DP initialisation failed");
                        return retval;
@@ -1891,6 +1891,12 @@ int cortex_m_examine(struct target *target)
        struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
        struct armv7m_common *armv7m = target_to_armv7m(target);
 
+       retval = dap_dp_init(swjdp);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("Could not initialize the debug port");
+               return retval;
+       }
+
        /* Search for the MEM-AP */
        retval = dap_find_ap(swjdp, AP_TYPE_AHB_AP, &armv7m->debug_ap);
        if (retval != ERROR_OK) {
@@ -1904,7 +1910,7 @@ int cortex_m_examine(struct target *target)
        /* stlink shares the examine handler but does not support
         * all its calls */
        if (!armv7m->stlink) {
-               retval = ahbap_debugport_init(armv7m->debug_ap);
+               retval = mem_ap_init(armv7m->debug_ap);
                if (retval != ERROR_OK)
                        return retval;
        }