tcl: add SPDX tag
[fw/openocd] / tcl / test / syntax1.cfg
1 # SPDX-License-Identifier: GPL-2.0-or-later
2
3 adapter srst delay 200
4 jtag_ntrst_delay 200
5
6 #use combined on interfaces or targets that can't set TRST/SRST separately
7 reset_config trst_and_srst srst_pulls_trst
8
9 #LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
10 adapter assert trst assert srst
11 adapter deassert trst deassert srst
12
13 #jtag scan chain
14 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
15 jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f
16
17 #target configuration
18 #daemon_startup reset
19
20 set _TARGETNAME [format "%s.cpu" lpc2148]
21 target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-backup 0
22
23 $_TARGETNAME configure -event reset-init {
24 soft_reset_halt
25 mvb 0xE01FC040 0x01
26 }
27
28
29
30 set _FLASHNAME $_CHIPNAME.flash
31 flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765