1 /* SPDX-License-Identifier: GPL-2.0-or-later */
4 * Support for RISC-V, debug version 0.13, which is currently (2/4/17) the
16 #include "target/target.h"
17 #include "target/algorithm.h"
18 #include "target/target_type.h"
19 #include <helper/log.h>
20 #include "jtag/jtag.h"
21 #include "target/register.h"
22 #include "target/breakpoints.h"
23 #include "helper/time_support.h"
24 #include "helper/list.h"
26 #include "debug_defines.h"
27 #include "rtos/rtos.h"
32 static int riscv013_on_step_or_resume(struct target *target, bool step);
33 static int riscv013_step_or_resume_current_hart(struct target *target,
34 bool step, bool use_hasel);
35 static void riscv013_clear_abstract_error(struct target *target);
37 /* Implementations of the functions in riscv_info_t. */
38 static int riscv013_get_register(struct target *target,
39 riscv_reg_t *value, int rid);
40 static int riscv013_set_register(struct target *target, int regid, uint64_t value);
41 static int riscv013_select_current_hart(struct target *target);
42 static int riscv013_halt_prep(struct target *target);
43 static int riscv013_halt_go(struct target *target);
44 static int riscv013_resume_go(struct target *target);
45 static int riscv013_step_current_hart(struct target *target);
46 static int riscv013_on_halt(struct target *target);
47 static int riscv013_on_step(struct target *target);
48 static int riscv013_resume_prep(struct target *target);
49 static bool riscv013_is_halted(struct target *target);
50 static enum riscv_halt_reason riscv013_halt_reason(struct target *target);
51 static int riscv013_write_debug_buffer(struct target *target, unsigned index,
53 static riscv_insn_t riscv013_read_debug_buffer(struct target *target, unsigned
55 static int riscv013_execute_debug_buffer(struct target *target);
56 static void riscv013_fill_dmi_write_u64(struct target *target, char *buf, int a, uint64_t d);
57 static void riscv013_fill_dmi_read_u64(struct target *target, char *buf, int a);
58 static int riscv013_dmi_write_u64_bits(struct target *target);
59 static void riscv013_fill_dmi_nop_u64(struct target *target, char *buf);
60 static int register_read(struct target *target, uint64_t *value, uint32_t number);
61 static int register_read_direct(struct target *target, uint64_t *value, uint32_t number);
62 static int register_write_direct(struct target *target, unsigned number,
64 static int read_memory(struct target *target, target_addr_t address,
65 uint32_t size, uint32_t count, uint8_t *buffer, uint32_t increment);
66 static int write_memory(struct target *target, target_addr_t address,
67 uint32_t size, uint32_t count, const uint8_t *buffer);
68 static int riscv013_test_sba_config_reg(struct target *target, target_addr_t legal_address,
69 uint32_t num_words, target_addr_t illegal_address, bool run_sbbusyerror_test);
70 void write_memory_sba_simple(struct target *target, target_addr_t addr, uint32_t *write_data,
71 uint32_t write_size, uint32_t sbcs);
72 void read_memory_sba_simple(struct target *target, target_addr_t addr,
73 uint32_t *rd_buf, uint32_t read_size, uint32_t sbcs);
76 * Since almost everything can be accomplish by scanning the dbus register, all
77 * functions here assume dbus is already selected. The exception are functions
78 * called directly by OpenOCD, which can't assume anything about what's
79 * currently in IR. They should set IR to dbus explicitly.
82 #define get_field(reg, mask) (((reg) & (mask)) / ((mask) & ~((mask) << 1)))
83 #define set_field(reg, mask, val) (((reg) & ~(mask)) | (((val) * ((mask) & ~((mask) << 1))) & (mask)))
85 #define CSR_DCSR_CAUSE_SWBP 1
86 #define CSR_DCSR_CAUSE_TRIGGER 2
87 #define CSR_DCSR_CAUSE_DEBUGINT 3
88 #define CSR_DCSR_CAUSE_STEP 4
89 #define CSR_DCSR_CAUSE_HALT 5
90 #define CSR_DCSR_CAUSE_GROUP 6
92 #define RISCV013_INFO(r) riscv013_info_t *r = get_info(target)
94 /*** JTAG registers. ***/
102 DMI_STATUS_SUCCESS = 0,
103 DMI_STATUS_FAILED = 2,
113 /*** Debug Bus registers. ***/
115 #define CMDERR_NONE 0
116 #define CMDERR_BUSY 1
117 #define CMDERR_NOT_SUPPORTED 2
118 #define CMDERR_EXCEPTION 3
119 #define CMDERR_HALT_RESUME 4
120 #define CMDERR_OTHER 7
122 /*** Info about the core being debugged. ***/
129 bool read, write, execute;
140 struct list_head list;
141 int abs_chain_position;
143 /* The number of harts connected to this DM. */
145 /* Indicates we already reset this DM, so don't need to do it again. */
147 /* Targets that are connected to this DM. */
148 struct list_head target_list;
149 /* The currently selected hartid on this DM. */
151 bool hasel_supported;
153 /* The program buffer stores executable code. 0 is an illegal instruction,
154 * so we use 0 to mean the cached value is invalid. */
155 uint32_t progbuf_cache[16];
159 struct list_head list;
160 struct target *target;
164 /* The indexed used to address this hart in its DM. */
166 /* Number of address bits in the dbus register. */
168 /* Number of abstract command data registers. */
170 /* Number of words in the Program Buffer. */
171 unsigned progbufsize;
173 /* We cache the read-only bits of sbcs here. */
176 yes_no_maybe_t progbuf_writable;
177 /* We only need the address so that we know the alignment of the buffer. */
178 riscv_addr_t progbuf_address;
180 /* Number of run-test/idle cycles the target requests we do after each dbus
182 unsigned int dtmcs_idle;
184 /* This value is incremented every time a dbus access comes back as "busy".
185 * It's used to determine how many run-test/idle cycles to feed the target
186 * in between accesses. */
187 unsigned int dmi_busy_delay;
189 /* Number of run-test/idle cycles to add between consecutive bus master
190 * reads/writes respectively. */
191 unsigned int bus_master_write_delay, bus_master_read_delay;
193 /* This value is increased every time we tried to execute two commands
194 * consecutively, and the second one failed because the previous hadn't
195 * completed yet. It's used to add extra run-test/idle cycles after
196 * starting a command, so we don't have to waste time checking for busy to
198 unsigned int ac_busy_delay;
200 bool abstract_read_csr_supported;
201 bool abstract_write_csr_supported;
202 bool abstract_read_fpr_supported;
203 bool abstract_write_fpr_supported;
205 yes_no_maybe_t has_aampostincrement;
207 /* When a function returns some error due to a failure indicated by the
208 * target in cmderr, the caller can look here to see what that error was.
209 * (Compare with errno.) */
212 /* Some fields from hartinfo. */
217 /* The width of the hartsel field. */
220 /* DM that provides access to this target. */
226 static riscv013_info_t *get_info(const struct target *target)
228 riscv_info_t *info = (riscv_info_t *) target->arch_info;
230 assert(info->version_specific);
231 return (riscv013_info_t *) info->version_specific;
235 * Return the DM structure for this target. If there isn't one, find it in the
236 * global list of DMs. If it's not in there, then create one and initialize it
239 dm013_info_t *get_dm(struct target *target)
245 int abs_chain_position = target->tap->abs_chain_position;
248 dm013_info_t *dm = NULL;
249 list_for_each_entry(entry, &dm_list, list) {
250 if (entry->abs_chain_position == abs_chain_position) {
257 LOG_DEBUG("[%d] Allocating new DM", target->coreid);
258 dm = calloc(1, sizeof(dm013_info_t));
261 dm->abs_chain_position = abs_chain_position;
262 dm->current_hartid = -1;
264 INIT_LIST_HEAD(&dm->target_list);
265 list_add(&dm->list, &dm_list);
269 target_list_t *target_entry;
270 list_for_each_entry(target_entry, &dm->target_list, list) {
271 if (target_entry->target == target)
274 target_entry = calloc(1, sizeof(*target_entry));
279 target_entry->target = target;
280 list_add(&target_entry->list, &dm->target_list);
285 static uint32_t set_hartsel(uint32_t initial, uint32_t index)
287 initial &= ~DM_DMCONTROL_HARTSELLO;
288 initial &= ~DM_DMCONTROL_HARTSELHI;
290 uint32_t index_lo = index & ((1 << DM_DMCONTROL_HARTSELLO_LENGTH) - 1);
291 initial |= index_lo << DM_DMCONTROL_HARTSELLO_OFFSET;
292 uint32_t index_hi = index >> DM_DMCONTROL_HARTSELLO_LENGTH;
293 assert(index_hi < 1 << DM_DMCONTROL_HARTSELHI_LENGTH);
294 initial |= index_hi << DM_DMCONTROL_HARTSELHI_OFFSET;
299 static void decode_dmi(char *text, unsigned address, unsigned data)
301 static const struct {
306 { DM_DMCONTROL, DM_DMCONTROL_HALTREQ, "haltreq" },
307 { DM_DMCONTROL, DM_DMCONTROL_RESUMEREQ, "resumereq" },
308 { DM_DMCONTROL, DM_DMCONTROL_HARTRESET, "hartreset" },
309 { DM_DMCONTROL, DM_DMCONTROL_HASEL, "hasel" },
310 { DM_DMCONTROL, DM_DMCONTROL_HARTSELHI, "hartselhi" },
311 { DM_DMCONTROL, DM_DMCONTROL_HARTSELLO, "hartsello" },
312 { DM_DMCONTROL, DM_DMCONTROL_NDMRESET, "ndmreset" },
313 { DM_DMCONTROL, DM_DMCONTROL_DMACTIVE, "dmactive" },
314 { DM_DMCONTROL, DM_DMCONTROL_ACKHAVERESET, "ackhavereset" },
316 { DM_DMSTATUS, DM_DMSTATUS_IMPEBREAK, "impebreak" },
317 { DM_DMSTATUS, DM_DMSTATUS_ALLHAVERESET, "allhavereset" },
318 { DM_DMSTATUS, DM_DMSTATUS_ANYHAVERESET, "anyhavereset" },
319 { DM_DMSTATUS, DM_DMSTATUS_ALLRESUMEACK, "allresumeack" },
320 { DM_DMSTATUS, DM_DMSTATUS_ANYRESUMEACK, "anyresumeack" },
321 { DM_DMSTATUS, DM_DMSTATUS_ALLNONEXISTENT, "allnonexistent" },
322 { DM_DMSTATUS, DM_DMSTATUS_ANYNONEXISTENT, "anynonexistent" },
323 { DM_DMSTATUS, DM_DMSTATUS_ALLUNAVAIL, "allunavail" },
324 { DM_DMSTATUS, DM_DMSTATUS_ANYUNAVAIL, "anyunavail" },
325 { DM_DMSTATUS, DM_DMSTATUS_ALLRUNNING, "allrunning" },
326 { DM_DMSTATUS, DM_DMSTATUS_ANYRUNNING, "anyrunning" },
327 { DM_DMSTATUS, DM_DMSTATUS_ALLHALTED, "allhalted" },
328 { DM_DMSTATUS, DM_DMSTATUS_ANYHALTED, "anyhalted" },
329 { DM_DMSTATUS, DM_DMSTATUS_AUTHENTICATED, "authenticated" },
330 { DM_DMSTATUS, DM_DMSTATUS_AUTHBUSY, "authbusy" },
331 { DM_DMSTATUS, DM_DMSTATUS_HASRESETHALTREQ, "hasresethaltreq" },
332 { DM_DMSTATUS, DM_DMSTATUS_CONFSTRPTRVALID, "confstrptrvalid" },
333 { DM_DMSTATUS, DM_DMSTATUS_VERSION, "version" },
335 { DM_ABSTRACTCS, DM_ABSTRACTCS_PROGBUFSIZE, "progbufsize" },
336 { DM_ABSTRACTCS, DM_ABSTRACTCS_BUSY, "busy" },
337 { DM_ABSTRACTCS, DM_ABSTRACTCS_CMDERR, "cmderr" },
338 { DM_ABSTRACTCS, DM_ABSTRACTCS_DATACOUNT, "datacount" },
340 { DM_COMMAND, DM_COMMAND_CMDTYPE, "cmdtype" },
342 { DM_SBCS, DM_SBCS_SBVERSION, "sbversion" },
343 { DM_SBCS, DM_SBCS_SBBUSYERROR, "sbbusyerror" },
344 { DM_SBCS, DM_SBCS_SBBUSY, "sbbusy" },
345 { DM_SBCS, DM_SBCS_SBREADONADDR, "sbreadonaddr" },
346 { DM_SBCS, DM_SBCS_SBACCESS, "sbaccess" },
347 { DM_SBCS, DM_SBCS_SBAUTOINCREMENT, "sbautoincrement" },
348 { DM_SBCS, DM_SBCS_SBREADONDATA, "sbreadondata" },
349 { DM_SBCS, DM_SBCS_SBERROR, "sberror" },
350 { DM_SBCS, DM_SBCS_SBASIZE, "sbasize" },
351 { DM_SBCS, DM_SBCS_SBACCESS128, "sbaccess128" },
352 { DM_SBCS, DM_SBCS_SBACCESS64, "sbaccess64" },
353 { DM_SBCS, DM_SBCS_SBACCESS32, "sbaccess32" },
354 { DM_SBCS, DM_SBCS_SBACCESS16, "sbaccess16" },
355 { DM_SBCS, DM_SBCS_SBACCESS8, "sbaccess8" },
359 for (unsigned i = 0; i < ARRAY_SIZE(description); i++) {
360 if (description[i].address == address) {
361 uint64_t mask = description[i].mask;
362 unsigned value = get_field(data, mask);
366 if (mask & (mask >> 1)) {
367 /* If the field is more than 1 bit wide. */
368 sprintf(text, "%s=%d", description[i].name, value);
370 strcpy(text, description[i].name);
372 text += strlen(text);
378 static void dump_field(int idle, const struct scan_field *field)
380 static const char * const op_string[] = {"-", "r", "w", "?"};
381 static const char * const status_string[] = {"+", "?", "F", "b"};
383 if (debug_level < LOG_LVL_DEBUG)
386 uint64_t out = buf_get_u64(field->out_value, 0, field->num_bits);
387 unsigned int out_op = get_field(out, DTM_DMI_OP);
388 unsigned int out_data = get_field(out, DTM_DMI_DATA);
389 unsigned int out_address = out >> DTM_DMI_ADDRESS_OFFSET;
391 uint64_t in = buf_get_u64(field->in_value, 0, field->num_bits);
392 unsigned int in_op = get_field(in, DTM_DMI_OP);
393 unsigned int in_data = get_field(in, DTM_DMI_DATA);
394 unsigned int in_address = in >> DTM_DMI_ADDRESS_OFFSET;
396 log_printf_lf(LOG_LVL_DEBUG,
397 __FILE__, __LINE__, "scan",
398 "%db %s %08x @%02x -> %s %08x @%02x; %di",
399 field->num_bits, op_string[out_op], out_data, out_address,
400 status_string[in_op], in_data, in_address, idle);
404 decode_dmi(out_text, out_address, out_data);
405 decode_dmi(in_text, in_address, in_data);
406 if (in_text[0] || out_text[0]) {
407 log_printf_lf(LOG_LVL_DEBUG, __FILE__, __LINE__, "scan", "%s -> %s",
412 /*** Utility functions. ***/
414 static void select_dmi(struct target *target)
416 if (bscan_tunnel_ir_width != 0) {
417 select_dmi_via_bscan(target);
420 jtag_add_ir_scan(target->tap, &select_dbus, TAP_IDLE);
423 static uint32_t dtmcontrol_scan(struct target *target, uint32_t out)
425 struct scan_field field;
427 uint8_t out_value[4] = { 0 };
429 if (bscan_tunnel_ir_width != 0)
430 return dtmcontrol_scan_via_bscan(target, out);
432 buf_set_u32(out_value, 0, 32, out);
434 jtag_add_ir_scan(target->tap, &select_dtmcontrol, TAP_IDLE);
437 field.out_value = out_value;
438 field.in_value = in_value;
439 jtag_add_dr_scan(target->tap, 1, &field, TAP_IDLE);
441 /* Always return to dmi. */
444 int retval = jtag_execute_queue();
445 if (retval != ERROR_OK) {
446 LOG_ERROR("failed jtag scan: %d", retval);
450 uint32_t in = buf_get_u32(field.in_value, 0, 32);
451 LOG_DEBUG("DTMCS: 0x%x -> 0x%x", out, in);
456 static void increase_dmi_busy_delay(struct target *target)
458 riscv013_info_t *info = get_info(target);
459 info->dmi_busy_delay += info->dmi_busy_delay / 10 + 1;
460 LOG_DEBUG("dtmcs_idle=%d, dmi_busy_delay=%d, ac_busy_delay=%d",
461 info->dtmcs_idle, info->dmi_busy_delay,
462 info->ac_busy_delay);
464 dtmcontrol_scan(target, DTM_DTMCS_DMIRESET);
468 * exec: If this is set, assume the scan results in an execution, so more
469 * run-test/idle cycles may be required.
471 static dmi_status_t dmi_scan(struct target *target, uint32_t *address_in,
472 uint32_t *data_in, dmi_op_t op, uint32_t address_out, uint32_t data_out,
475 riscv013_info_t *info = get_info(target);
477 unsigned num_bits = info->abits + DTM_DMI_OP_LENGTH + DTM_DMI_DATA_LENGTH;
478 size_t num_bytes = (num_bits + 7) / 8;
479 uint8_t in[num_bytes];
480 uint8_t out[num_bytes];
481 struct scan_field field = {
482 .num_bits = num_bits,
486 riscv_bscan_tunneled_scan_context_t bscan_ctxt;
488 if (r->reset_delays_wait >= 0) {
489 r->reset_delays_wait--;
490 if (r->reset_delays_wait < 0) {
491 info->dmi_busy_delay = 0;
492 info->ac_busy_delay = 0;
496 memset(in, 0, num_bytes);
497 memset(out, 0, num_bytes);
499 assert(info->abits != 0);
501 buf_set_u32(out, DTM_DMI_OP_OFFSET, DTM_DMI_OP_LENGTH, op);
502 buf_set_u32(out, DTM_DMI_DATA_OFFSET, DTM_DMI_DATA_LENGTH, data_out);
503 buf_set_u32(out, DTM_DMI_ADDRESS_OFFSET, info->abits, address_out);
505 /* I wanted to place this code in a different function, but the way JTAG command
506 queueing works in the jtag handling functions, the scan fields either have to be
507 heap allocated, global/static, or else they need to stay on the stack until
508 the jtag_execute_queue() call. Heap or static fields in this case doesn't seem
509 the best fit. Declaring stack based field values in a subsidiary function call wouldn't
511 if (bscan_tunnel_ir_width != 0) {
512 riscv_add_bscan_tunneled_scan(target, &field, &bscan_ctxt);
514 /* Assume dbus is already selected. */
515 jtag_add_dr_scan(target->tap, 1, &field, TAP_IDLE);
518 int idle_count = info->dmi_busy_delay;
520 idle_count += info->ac_busy_delay;
523 jtag_add_runtest(idle_count, TAP_IDLE);
525 int retval = jtag_execute_queue();
526 if (retval != ERROR_OK) {
527 LOG_ERROR("dmi_scan failed jtag scan");
530 return DMI_STATUS_FAILED;
533 if (bscan_tunnel_ir_width != 0) {
534 /* need to right-shift "in" by one bit, because of clock skew between BSCAN TAP and DM TAP */
535 buffer_shr(in, num_bytes, 1);
539 *data_in = buf_get_u32(in, DTM_DMI_DATA_OFFSET, DTM_DMI_DATA_LENGTH);
542 *address_in = buf_get_u32(in, DTM_DMI_ADDRESS_OFFSET, info->abits);
543 dump_field(idle_count, &field);
544 return buf_get_u32(in, DTM_DMI_OP_OFFSET, DTM_DMI_OP_LENGTH);
549 * @param data_in The data we received from the target.
550 * @param dmi_busy_encountered
551 * If non-NULL, will be updated to reflect whether DMI busy was
552 * encountered while executing this operation or not.
553 * @param dmi_op The operation to perform (read/write/nop).
554 * @param address The address argument to that operation.
555 * @param data_out The data to send to the target.
557 * @param exec When true, this scan will execute something, so extra RTI
558 * cycles may be added.
559 * @param ensure_success
560 * Scan a nop after the requested operation, ensuring the
561 * DMI operation succeeded.
563 static int dmi_op_timeout(struct target *target, uint32_t *data_in,
564 bool *dmi_busy_encountered, int dmi_op, uint32_t address,
565 uint32_t data_out, int timeout_sec, bool exec, bool ensure_success)
572 if (dmi_busy_encountered)
573 *dmi_busy_encountered = false;
587 LOG_ERROR("Invalid DMI operation: %d", dmi_op);
593 time_t start = time(NULL);
594 /* This first loop performs the request. Note that if for some reason this
595 * stays busy, it is actually due to the previous access. */
597 status = dmi_scan(target, NULL, NULL, dmi_op, address, data_out,
599 if (status == DMI_STATUS_BUSY) {
600 increase_dmi_busy_delay(target);
601 if (dmi_busy_encountered)
602 *dmi_busy_encountered = true;
603 } else if (status == DMI_STATUS_SUCCESS) {
606 LOG_ERROR("failed %s at 0x%x, status=%d", op_name, address, status);
609 if (time(NULL) - start > timeout_sec)
610 return ERROR_TIMEOUT_REACHED;
613 if (status != DMI_STATUS_SUCCESS) {
614 LOG_ERROR("Failed %s at 0x%x; status=%d", op_name, address, status);
618 if (ensure_success) {
619 /* This second loop ensures the request succeeded, and gets back data.
620 * Note that NOP can result in a 'busy' result as well, but that would be
621 * noticed on the next DMI access we do. */
623 status = dmi_scan(target, &address_in, data_in, DMI_OP_NOP, address, 0,
625 if (status == DMI_STATUS_BUSY) {
626 increase_dmi_busy_delay(target);
627 if (dmi_busy_encountered)
628 *dmi_busy_encountered = true;
629 } else if (status == DMI_STATUS_SUCCESS) {
633 LOG_ERROR("Failed %s (NOP) at 0x%x; value=0x%x, status=%d",
634 op_name, address, *data_in, status);
636 LOG_ERROR("Failed %s (NOP) at 0x%x; status=%d", op_name, address,
641 if (time(NULL) - start > timeout_sec)
642 return ERROR_TIMEOUT_REACHED;
649 static int dmi_op(struct target *target, uint32_t *data_in,
650 bool *dmi_busy_encountered, int dmi_op, uint32_t address,
651 uint32_t data_out, bool exec, bool ensure_success)
653 int result = dmi_op_timeout(target, data_in, dmi_busy_encountered, dmi_op,
654 address, data_out, riscv_command_timeout_sec, exec, ensure_success);
655 if (result == ERROR_TIMEOUT_REACHED) {
656 LOG_ERROR("DMI operation didn't complete in %d seconds. The target is "
657 "either really slow or broken. You could increase the "
658 "timeout with riscv set_command_timeout_sec.",
659 riscv_command_timeout_sec);
665 static int dmi_read(struct target *target, uint32_t *value, uint32_t address)
667 return dmi_op(target, value, NULL, DMI_OP_READ, address, 0, false, true);
670 static int dmi_read_exec(struct target *target, uint32_t *value, uint32_t address)
672 return dmi_op(target, value, NULL, DMI_OP_READ, address, 0, true, true);
675 static int dmi_write(struct target *target, uint32_t address, uint32_t value)
677 return dmi_op(target, NULL, NULL, DMI_OP_WRITE, address, value, false, true);
680 static int dmi_write_exec(struct target *target, uint32_t address,
681 uint32_t value, bool ensure_success)
683 return dmi_op(target, NULL, NULL, DMI_OP_WRITE, address, value, true, ensure_success);
686 int dmstatus_read_timeout(struct target *target, uint32_t *dmstatus,
687 bool authenticated, unsigned timeout_sec)
689 int result = dmi_op_timeout(target, dmstatus, NULL, DMI_OP_READ,
690 DM_DMSTATUS, 0, timeout_sec, false, true);
691 if (result != ERROR_OK)
693 int dmstatus_version = get_field(*dmstatus, DM_DMSTATUS_VERSION);
694 if (dmstatus_version != 2 && dmstatus_version != 3) {
695 LOG_ERROR("OpenOCD only supports Debug Module version 2 (0.13) and 3 (1.0), not "
696 "%d (dmstatus=0x%x). This error might be caused by a JTAG "
697 "signal issue. Try reducing the JTAG clock speed.",
698 get_field(*dmstatus, DM_DMSTATUS_VERSION), *dmstatus);
699 } else if (authenticated && !get_field(*dmstatus, DM_DMSTATUS_AUTHENTICATED)) {
700 LOG_ERROR("Debugger is not authenticated to target Debug Module. "
701 "(dmstatus=0x%x). Use `riscv authdata_read` and "
702 "`riscv authdata_write` commands to authenticate.", *dmstatus);
708 int dmstatus_read(struct target *target, uint32_t *dmstatus,
711 return dmstatus_read_timeout(target, dmstatus, authenticated,
712 riscv_command_timeout_sec);
715 static void increase_ac_busy_delay(struct target *target)
717 riscv013_info_t *info = get_info(target);
718 info->ac_busy_delay += info->ac_busy_delay / 10 + 1;
719 LOG_DEBUG("dtmcs_idle=%d, dmi_busy_delay=%d, ac_busy_delay=%d",
720 info->dtmcs_idle, info->dmi_busy_delay,
721 info->ac_busy_delay);
724 uint32_t abstract_register_size(unsigned width)
728 return set_field(0, AC_ACCESS_REGISTER_AARSIZE, 2);
730 return set_field(0, AC_ACCESS_REGISTER_AARSIZE, 3);
732 return set_field(0, AC_ACCESS_REGISTER_AARSIZE, 4);
734 LOG_ERROR("Unsupported register width: %d", width);
739 static int wait_for_idle(struct target *target, uint32_t *abstractcs)
742 time_t start = time(NULL);
744 if (dmi_read(target, abstractcs, DM_ABSTRACTCS) != ERROR_OK)
747 if (get_field(*abstractcs, DM_ABSTRACTCS_BUSY) == 0)
750 if (time(NULL) - start > riscv_command_timeout_sec) {
751 info->cmderr = get_field(*abstractcs, DM_ABSTRACTCS_CMDERR);
752 if (info->cmderr != CMDERR_NONE) {
753 const char *errors[8] = {
763 LOG_ERROR("Abstract command ended in error '%s' (abstractcs=0x%x)",
764 errors[info->cmderr], *abstractcs);
767 LOG_ERROR("Timed out after %ds waiting for busy to go low (abstractcs=0x%x). "
768 "Increase the timeout with riscv set_command_timeout_sec.",
769 riscv_command_timeout_sec,
776 static int execute_abstract_command(struct target *target, uint32_t command)
779 if (debug_level >= LOG_LVL_DEBUG) {
780 switch (get_field(command, DM_COMMAND_CMDTYPE)) {
782 LOG_DEBUG("command=0x%x; access register, size=%d, postexec=%d, "
783 "transfer=%d, write=%d, regno=0x%x",
785 8 << get_field(command, AC_ACCESS_REGISTER_AARSIZE),
786 get_field(command, AC_ACCESS_REGISTER_POSTEXEC),
787 get_field(command, AC_ACCESS_REGISTER_TRANSFER),
788 get_field(command, AC_ACCESS_REGISTER_WRITE),
789 get_field(command, AC_ACCESS_REGISTER_REGNO));
792 LOG_DEBUG("command=0x%x", command);
797 if (dmi_write_exec(target, DM_COMMAND, command, false) != ERROR_OK)
800 uint32_t abstractcs = 0;
801 int result = wait_for_idle(target, &abstractcs);
803 info->cmderr = get_field(abstractcs, DM_ABSTRACTCS_CMDERR);
804 if (info->cmderr != 0 || result != ERROR_OK) {
805 LOG_DEBUG("command 0x%x failed; abstractcs=0x%x", command, abstractcs);
806 /* Clear the error. */
807 dmi_write(target, DM_ABSTRACTCS, DM_ABSTRACTCS_CMDERR);
814 static riscv_reg_t read_abstract_arg(struct target *target, unsigned index,
817 riscv_reg_t value = 0;
819 unsigned offset = index * size_bits / 32;
822 LOG_ERROR("Unsupported size: %d bits", size_bits);
825 dmi_read(target, &v, DM_DATA0 + offset + 1);
826 value |= ((uint64_t) v) << 32;
829 dmi_read(target, &v, DM_DATA0 + offset);
835 static int write_abstract_arg(struct target *target, unsigned index,
836 riscv_reg_t value, unsigned size_bits)
838 unsigned offset = index * size_bits / 32;
841 LOG_ERROR("Unsupported size: %d bits", size_bits);
844 dmi_write(target, DM_DATA0 + offset + 1, value >> 32);
847 dmi_write(target, DM_DATA0 + offset, value);
855 static uint32_t access_register_command(struct target *target, uint32_t number,
856 unsigned size, uint32_t flags)
858 uint32_t command = set_field(0, DM_COMMAND_CMDTYPE, 0);
861 command = set_field(command, AC_ACCESS_REGISTER_AARSIZE, 2);
864 command = set_field(command, AC_ACCESS_REGISTER_AARSIZE, 3);
867 LOG_ERROR("%d-bit register %s not supported.", size,
868 gdb_regno_name(number));
872 if (number <= GDB_REGNO_XPR31) {
873 command = set_field(command, AC_ACCESS_REGISTER_REGNO,
874 0x1000 + number - GDB_REGNO_ZERO);
875 } else if (number >= GDB_REGNO_FPR0 && number <= GDB_REGNO_FPR31) {
876 command = set_field(command, AC_ACCESS_REGISTER_REGNO,
877 0x1020 + number - GDB_REGNO_FPR0);
878 } else if (number >= GDB_REGNO_CSR0 && number <= GDB_REGNO_CSR4095) {
879 command = set_field(command, AC_ACCESS_REGISTER_REGNO,
880 number - GDB_REGNO_CSR0);
881 } else if (number >= GDB_REGNO_COUNT) {
882 /* Custom register. */
883 assert(target->reg_cache->reg_list[number].arch_info);
884 riscv_reg_info_t *reg_info = target->reg_cache->reg_list[number].arch_info;
886 command = set_field(command, AC_ACCESS_REGISTER_REGNO,
887 0xc000 + reg_info->custom_number);
897 static int register_read_abstract(struct target *target, uint64_t *value,
898 uint32_t number, unsigned size)
902 if (number >= GDB_REGNO_FPR0 && number <= GDB_REGNO_FPR31 &&
903 !info->abstract_read_fpr_supported)
905 if (number >= GDB_REGNO_CSR0 && number <= GDB_REGNO_CSR4095 &&
906 !info->abstract_read_csr_supported)
908 /* The spec doesn't define abstract register numbers for vector registers. */
909 if (number >= GDB_REGNO_V0 && number <= GDB_REGNO_V31)
912 uint32_t command = access_register_command(target, number, size,
913 AC_ACCESS_REGISTER_TRANSFER);
915 int result = execute_abstract_command(target, command);
916 if (result != ERROR_OK) {
917 if (info->cmderr == CMDERR_NOT_SUPPORTED) {
918 if (number >= GDB_REGNO_FPR0 && number <= GDB_REGNO_FPR31) {
919 info->abstract_read_fpr_supported = false;
920 LOG_INFO("Disabling abstract command reads from FPRs.");
921 } else if (number >= GDB_REGNO_CSR0 && number <= GDB_REGNO_CSR4095) {
922 info->abstract_read_csr_supported = false;
923 LOG_INFO("Disabling abstract command reads from CSRs.");
930 *value = read_abstract_arg(target, 0, size);
935 static int register_write_abstract(struct target *target, uint32_t number,
936 uint64_t value, unsigned size)
940 if (number >= GDB_REGNO_FPR0 && number <= GDB_REGNO_FPR31 &&
941 !info->abstract_write_fpr_supported)
943 if (number >= GDB_REGNO_CSR0 && number <= GDB_REGNO_CSR4095 &&
944 !info->abstract_write_csr_supported)
947 uint32_t command = access_register_command(target, number, size,
948 AC_ACCESS_REGISTER_TRANSFER |
949 AC_ACCESS_REGISTER_WRITE);
951 if (write_abstract_arg(target, 0, value, size) != ERROR_OK)
954 int result = execute_abstract_command(target, command);
955 if (result != ERROR_OK) {
956 if (info->cmderr == CMDERR_NOT_SUPPORTED) {
957 if (number >= GDB_REGNO_FPR0 && number <= GDB_REGNO_FPR31) {
958 info->abstract_write_fpr_supported = false;
959 LOG_INFO("Disabling abstract command writes to FPRs.");
960 } else if (number >= GDB_REGNO_CSR0 && number <= GDB_REGNO_CSR4095) {
961 info->abstract_write_csr_supported = false;
962 LOG_INFO("Disabling abstract command writes to CSRs.");
972 * Sets the AAMSIZE field of a memory access abstract command based on
975 static uint32_t abstract_memory_size(unsigned width)
979 return set_field(0, AC_ACCESS_MEMORY_AAMSIZE, 0);
981 return set_field(0, AC_ACCESS_MEMORY_AAMSIZE, 1);
983 return set_field(0, AC_ACCESS_MEMORY_AAMSIZE, 2);
985 return set_field(0, AC_ACCESS_MEMORY_AAMSIZE, 3);
987 return set_field(0, AC_ACCESS_MEMORY_AAMSIZE, 4);
989 LOG_ERROR("Unsupported memory width: %d", width);
995 * Creates a memory access abstract command.
997 static uint32_t access_memory_command(struct target *target, bool virtual,
998 unsigned width, bool postincrement, bool write)
1000 uint32_t command = set_field(0, AC_ACCESS_MEMORY_CMDTYPE, 2);
1001 command = set_field(command, AC_ACCESS_MEMORY_AAMVIRTUAL, virtual);
1002 command |= abstract_memory_size(width);
1003 command = set_field(command, AC_ACCESS_MEMORY_AAMPOSTINCREMENT,
1005 command = set_field(command, AC_ACCESS_MEMORY_WRITE, write);
1010 static int examine_progbuf(struct target *target)
1012 riscv013_info_t *info = get_info(target);
1014 if (info->progbuf_writable != YNM_MAYBE)
1017 /* Figure out if progbuf is writable. */
1019 if (info->progbufsize < 1) {
1020 info->progbuf_writable = YNM_NO;
1021 LOG_INFO("No program buffer present.");
1026 if (register_read(target, &s0, GDB_REGNO_S0) != ERROR_OK)
1029 struct riscv_program program;
1030 riscv_program_init(&program, target);
1031 riscv_program_insert(&program, auipc(S0));
1032 if (riscv_program_exec(&program, target) != ERROR_OK)
1035 if (register_read_direct(target, &info->progbuf_address, GDB_REGNO_S0) != ERROR_OK)
1038 riscv_program_init(&program, target);
1039 riscv_program_insert(&program, sw(S0, S0, 0));
1040 int result = riscv_program_exec(&program, target);
1042 if (register_write_direct(target, GDB_REGNO_S0, s0) != ERROR_OK)
1045 if (result != ERROR_OK) {
1046 /* This program might have failed if the program buffer is not
1048 info->progbuf_writable = YNM_NO;
1053 if (dmi_read(target, &written, DM_PROGBUF0) != ERROR_OK)
1055 if (written == (uint32_t) info->progbuf_address) {
1056 LOG_INFO("progbuf is writable at 0x%" PRIx64,
1057 info->progbuf_address);
1058 info->progbuf_writable = YNM_YES;
1061 LOG_INFO("progbuf is not writeable at 0x%" PRIx64,
1062 info->progbuf_address);
1063 info->progbuf_writable = YNM_NO;
1069 static int is_fpu_reg(uint32_t gdb_regno)
1071 return (gdb_regno >= GDB_REGNO_FPR0 && gdb_regno <= GDB_REGNO_FPR31) ||
1072 (gdb_regno == GDB_REGNO_CSR0 + CSR_FFLAGS) ||
1073 (gdb_regno == GDB_REGNO_CSR0 + CSR_FRM) ||
1074 (gdb_regno == GDB_REGNO_CSR0 + CSR_FCSR);
1077 static int is_vector_reg(uint32_t gdb_regno)
1079 return (gdb_regno >= GDB_REGNO_V0 && gdb_regno <= GDB_REGNO_V31) ||
1080 gdb_regno == GDB_REGNO_VSTART ||
1081 gdb_regno == GDB_REGNO_VXSAT ||
1082 gdb_regno == GDB_REGNO_VXRM ||
1083 gdb_regno == GDB_REGNO_VL ||
1084 gdb_regno == GDB_REGNO_VTYPE ||
1085 gdb_regno == GDB_REGNO_VLENB;
1088 static int prep_for_register_access(struct target *target, uint64_t *mstatus,
1091 if (is_fpu_reg(regno) || is_vector_reg(regno)) {
1092 if (register_read(target, mstatus, GDB_REGNO_MSTATUS) != ERROR_OK)
1094 if (is_fpu_reg(regno) && (*mstatus & MSTATUS_FS) == 0) {
1095 if (register_write_direct(target, GDB_REGNO_MSTATUS,
1096 set_field(*mstatus, MSTATUS_FS, 1)) != ERROR_OK)
1098 } else if (is_vector_reg(regno) && (*mstatus & MSTATUS_VS) == 0) {
1099 if (register_write_direct(target, GDB_REGNO_MSTATUS,
1100 set_field(*mstatus, MSTATUS_VS, 1)) != ERROR_OK)
1109 static int cleanup_after_register_access(struct target *target,
1110 uint64_t mstatus, int regno)
1112 if ((is_fpu_reg(regno) && (mstatus & MSTATUS_FS) == 0) ||
1113 (is_vector_reg(regno) && (mstatus & MSTATUS_VS) == 0))
1114 if (register_write_direct(target, GDB_REGNO_MSTATUS, mstatus) != ERROR_OK)
1126 /* How can the debugger access this memory? */
1127 memory_space_t memory_space;
1128 /* Memory address to access the scratch memory from the hart. */
1129 riscv_addr_t hart_address;
1130 /* Memory address to access the scratch memory from the debugger. */
1131 riscv_addr_t debug_address;
1132 struct working_area *area;
1136 * Find some scratch memory to be used with the given program.
1138 static int scratch_reserve(struct target *target,
1139 scratch_mem_t *scratch,
1140 struct riscv_program *program,
1141 unsigned size_bytes)
1143 riscv_addr_t alignment = 1;
1144 while (alignment < size_bytes)
1147 scratch->area = NULL;
1149 riscv013_info_t *info = get_info(target);
1151 /* Option 1: See if data# registers can be used as the scratch memory */
1152 if (info->dataaccess == 1) {
1153 /* Sign extend dataaddr. */
1154 scratch->hart_address = info->dataaddr;
1155 if (info->dataaddr & (1<<11))
1156 scratch->hart_address |= 0xfffffffffffff000ULL;
1158 scratch->hart_address = (scratch->hart_address + alignment - 1) & ~(alignment - 1);
1160 if ((size_bytes + scratch->hart_address - info->dataaddr + 3) / 4 >=
1162 scratch->memory_space = SPACE_DM_DATA;
1163 scratch->debug_address = (scratch->hart_address - info->dataaddr) / 4;
1168 /* Option 2: See if progbuf can be used as the scratch memory */
1169 if (examine_progbuf(target) != ERROR_OK)
1172 /* Allow for ebreak at the end of the program. */
1173 unsigned program_size = (program->instruction_count + 1) * 4;
1174 scratch->hart_address = (info->progbuf_address + program_size + alignment - 1) &
1176 if ((info->progbuf_writable == YNM_YES) &&
1177 ((size_bytes + scratch->hart_address - info->progbuf_address + 3) / 4 >=
1178 info->progbufsize)) {
1179 scratch->memory_space = SPACE_DMI_PROGBUF;
1180 scratch->debug_address = (scratch->hart_address - info->progbuf_address) / 4;
1184 /* Option 3: User-configured memory area as scratch RAM */
1185 if (target_alloc_working_area(target, size_bytes + alignment - 1,
1186 &scratch->area) == ERROR_OK) {
1187 scratch->hart_address = (scratch->area->address + alignment - 1) &
1189 scratch->memory_space = SPACE_DMI_RAM;
1190 scratch->debug_address = scratch->hart_address;
1194 LOG_ERROR("Couldn't find %d bytes of scratch RAM to use. Please configure "
1195 "a work area with 'configure -work-area-phys'.", size_bytes);
1199 static int scratch_release(struct target *target,
1200 scratch_mem_t *scratch)
1202 return target_free_working_area(target, scratch->area);
1205 static int scratch_read64(struct target *target, scratch_mem_t *scratch,
1209 switch (scratch->memory_space) {
1211 if (dmi_read(target, &v, DM_DATA0 + scratch->debug_address) != ERROR_OK)
1214 if (dmi_read(target, &v, DM_DATA1 + scratch->debug_address) != ERROR_OK)
1216 *value |= ((uint64_t) v) << 32;
1218 case SPACE_DMI_PROGBUF:
1219 if (dmi_read(target, &v, DM_PROGBUF0 + scratch->debug_address) != ERROR_OK)
1222 if (dmi_read(target, &v, DM_PROGBUF1 + scratch->debug_address) != ERROR_OK)
1224 *value |= ((uint64_t) v) << 32;
1228 uint8_t buffer[8] = {0};
1229 if (read_memory(target, scratch->debug_address, 4, 2, buffer, 4) != ERROR_OK)
1231 *value = buffer[0] |
1232 (((uint64_t) buffer[1]) << 8) |
1233 (((uint64_t) buffer[2]) << 16) |
1234 (((uint64_t) buffer[3]) << 24) |
1235 (((uint64_t) buffer[4]) << 32) |
1236 (((uint64_t) buffer[5]) << 40) |
1237 (((uint64_t) buffer[6]) << 48) |
1238 (((uint64_t) buffer[7]) << 56);
1245 static int scratch_write64(struct target *target, scratch_mem_t *scratch,
1248 switch (scratch->memory_space) {
1250 dmi_write(target, DM_DATA0 + scratch->debug_address, value);
1251 dmi_write(target, DM_DATA1 + scratch->debug_address, value >> 32);
1253 case SPACE_DMI_PROGBUF:
1254 dmi_write(target, DM_PROGBUF0 + scratch->debug_address, value);
1255 dmi_write(target, DM_PROGBUF1 + scratch->debug_address, value >> 32);
1259 uint8_t buffer[8] = {
1269 if (write_memory(target, scratch->debug_address, 4, 2, buffer) != ERROR_OK)
1277 /** Return register size in bits. */
1278 static unsigned register_size(struct target *target, unsigned number)
1280 /* If reg_cache hasn't been initialized yet, make a guess. We need this for
1281 * when this function is called during examine(). */
1282 if (target->reg_cache)
1283 return target->reg_cache->reg_list[number].size;
1285 return riscv_xlen(target);
1288 static bool has_sufficient_progbuf(struct target *target, unsigned size)
1290 RISCV013_INFO(info);
1293 return info->progbufsize + r->impebreak >= size;
1297 * Immediately write the new value to the requested register. This mechanism
1298 * bypasses any caches.
1300 static int register_write_direct(struct target *target, unsigned number,
1303 LOG_DEBUG("{%d} %s <- 0x%" PRIx64, riscv_current_hartid(target),
1304 gdb_regno_name(number), value);
1306 int result = register_write_abstract(target, number, value,
1307 register_size(target, number));
1308 if (result == ERROR_OK || !has_sufficient_progbuf(target, 2) ||
1309 !riscv_is_halted(target))
1312 struct riscv_program program;
1313 riscv_program_init(&program, target);
1316 if (register_read(target, &s0, GDB_REGNO_S0) != ERROR_OK)
1320 if (prep_for_register_access(target, &mstatus, number) != ERROR_OK)
1323 scratch_mem_t scratch;
1324 bool use_scratch = false;
1325 if (number >= GDB_REGNO_FPR0 && number <= GDB_REGNO_FPR31 &&
1326 riscv_supports_extension(target, 'D') &&
1327 riscv_xlen(target) < 64) {
1328 /* There are no instructions to move all the bits from a register, so
1329 * we need to use some scratch RAM. */
1331 riscv_program_insert(&program, fld(number - GDB_REGNO_FPR0, S0, 0));
1333 if (scratch_reserve(target, &scratch, &program, 8) != ERROR_OK)
1336 if (register_write_direct(target, GDB_REGNO_S0, scratch.hart_address)
1338 scratch_release(target, &scratch);
1342 if (scratch_write64(target, &scratch, value) != ERROR_OK) {
1343 scratch_release(target, &scratch);
1347 } else if (number == GDB_REGNO_VTYPE) {
1348 riscv_program_insert(&program, csrr(S0, CSR_VL));
1349 riscv_program_insert(&program, vsetvli(ZERO, S0, value));
1352 if (register_write_direct(target, GDB_REGNO_S0, value) != ERROR_OK)
1355 if (number >= GDB_REGNO_FPR0 && number <= GDB_REGNO_FPR31) {
1356 if (riscv_supports_extension(target, 'D'))
1357 riscv_program_insert(&program, fmv_d_x(number - GDB_REGNO_FPR0, S0));
1359 riscv_program_insert(&program, fmv_w_x(number - GDB_REGNO_FPR0, S0));
1360 } else if (number == GDB_REGNO_VL) {
1361 /* "The XLEN-bit-wide read-only vl CSR can only be updated by the
1362 * vsetvli and vsetvl instructions, and the fault-only-rst vector
1363 * load instruction variants." */
1365 if (register_read(target, &vtype, GDB_REGNO_VTYPE) != ERROR_OK)
1367 if (riscv_program_insert(&program, vsetvli(ZERO, S0, vtype)) != ERROR_OK)
1369 } else if (number >= GDB_REGNO_CSR0 && number <= GDB_REGNO_CSR4095) {
1370 riscv_program_csrw(&program, S0, number);
1372 LOG_ERROR("Unsupported register (enum gdb_regno)(%d)", number);
1377 int exec_out = riscv_program_exec(&program, target);
1378 /* Don't message on error. Probably the register doesn't exist. */
1379 if (exec_out == ERROR_OK && target->reg_cache) {
1380 struct reg *reg = &target->reg_cache->reg_list[number];
1381 buf_set_u64(reg->value, 0, reg->size, value);
1385 scratch_release(target, &scratch);
1387 if (cleanup_after_register_access(target, mstatus, number) != ERROR_OK)
1391 if (register_write_direct(target, GDB_REGNO_S0, s0) != ERROR_OK)
1397 /** Read register value from the target. Also update the cached value. */
1398 static int register_read(struct target *target, uint64_t *value, uint32_t number)
1400 if (number == GDB_REGNO_ZERO) {
1404 int result = register_read_direct(target, value, number);
1405 if (result != ERROR_OK)
1407 if (target->reg_cache) {
1408 struct reg *reg = &target->reg_cache->reg_list[number];
1409 buf_set_u64(reg->value, 0, reg->size, *value);
1414 /** Actually read registers from the target right now. */
1415 static int register_read_direct(struct target *target, uint64_t *value, uint32_t number)
1417 int result = register_read_abstract(target, value, number,
1418 register_size(target, number));
1420 if (result != ERROR_OK &&
1421 has_sufficient_progbuf(target, 2) &&
1422 number > GDB_REGNO_XPR31) {
1423 struct riscv_program program;
1424 riscv_program_init(&program, target);
1426 scratch_mem_t scratch;
1427 bool use_scratch = false;
1430 if (register_read(target, &s0, GDB_REGNO_S0) != ERROR_OK)
1433 /* Write program to move data into s0. */
1436 if (prep_for_register_access(target, &mstatus, number) != ERROR_OK)
1439 if (number >= GDB_REGNO_FPR0 && number <= GDB_REGNO_FPR31) {
1440 if (riscv_supports_extension(target, 'D')
1441 && riscv_xlen(target) < 64) {
1442 /* There are no instructions to move all the bits from a
1443 * register, so we need to use some scratch RAM. */
1444 riscv_program_insert(&program, fsd(number - GDB_REGNO_FPR0, S0,
1447 if (scratch_reserve(target, &scratch, &program, 8) != ERROR_OK)
1451 if (register_write_direct(target, GDB_REGNO_S0,
1452 scratch.hart_address) != ERROR_OK) {
1453 scratch_release(target, &scratch);
1456 } else if (riscv_supports_extension(target, 'D')) {
1457 riscv_program_insert(&program, fmv_x_d(S0, number - GDB_REGNO_FPR0));
1459 riscv_program_insert(&program, fmv_x_w(S0, number - GDB_REGNO_FPR0));
1461 } else if (number >= GDB_REGNO_CSR0 && number <= GDB_REGNO_CSR4095) {
1462 riscv_program_csrr(&program, S0, number);
1464 LOG_ERROR("Unsupported register: %s", gdb_regno_name(number));
1468 /* Execute program. */
1469 result = riscv_program_exec(&program, target);
1470 /* Don't message on error. Probably the register doesn't exist. */
1473 result = scratch_read64(target, &scratch, value);
1474 scratch_release(target, &scratch);
1475 if (result != ERROR_OK)
1479 if (register_read_direct(target, value, GDB_REGNO_S0) != ERROR_OK)
1483 if (cleanup_after_register_access(target, mstatus, number) != ERROR_OK)
1487 if (register_write_direct(target, GDB_REGNO_S0, s0) != ERROR_OK)
1491 if (result == ERROR_OK) {
1492 LOG_DEBUG("{%d} %s = 0x%" PRIx64, riscv_current_hartid(target),
1493 gdb_regno_name(number), *value);
1499 static int wait_for_authbusy(struct target *target, uint32_t *dmstatus)
1501 time_t start = time(NULL);
1504 if (dmstatus_read(target, &value, false) != ERROR_OK)
1508 if (!get_field(value, DM_DMSTATUS_AUTHBUSY))
1510 if (time(NULL) - start > riscv_command_timeout_sec) {
1511 LOG_ERROR("Timed out after %ds waiting for authbusy to go low (dmstatus=0x%x). "
1512 "Increase the timeout with riscv set_command_timeout_sec.",
1513 riscv_command_timeout_sec,
1522 /*** OpenOCD target functions. ***/
1524 static void deinit_target(struct target *target)
1526 LOG_DEBUG("riscv_deinit_target()");
1527 riscv_info_t *info = (riscv_info_t *) target->arch_info;
1528 free(info->version_specific);
1529 /* TODO: free register arch_info */
1530 info->version_specific = NULL;
1533 static int set_haltgroup(struct target *target, bool *supported)
1535 uint32_t write = set_field(DM_DMCS2_HGWRITE, DM_DMCS2_GROUP, target->smp);
1536 if (dmi_write(target, DM_DMCS2, write) != ERROR_OK)
1539 if (dmi_read(target, &read, DM_DMCS2) != ERROR_OK)
1541 *supported = get_field(read, DM_DMCS2_GROUP) == (unsigned)target->smp;
1545 static int discover_vlenb(struct target *target)
1550 if (register_read(target, &vlenb, GDB_REGNO_VLENB) != ERROR_OK) {
1551 LOG_WARNING("Couldn't read vlenb for %s; vector register access won't work.",
1552 target_name(target));
1558 LOG_INFO("Vector support with vlenb=%d", r->vlenb);
1563 static int examine(struct target *target)
1565 /* Don't need to select dbus, since the first thing we do is read dtmcontrol. */
1567 uint32_t dtmcontrol = dtmcontrol_scan(target, 0);
1568 LOG_DEBUG("dtmcontrol=0x%x", dtmcontrol);
1569 LOG_DEBUG(" dmireset=%d", get_field(dtmcontrol, DTM_DTMCS_DMIRESET));
1570 LOG_DEBUG(" idle=%d", get_field(dtmcontrol, DTM_DTMCS_IDLE));
1571 LOG_DEBUG(" dmistat=%d", get_field(dtmcontrol, DTM_DTMCS_DMISTAT));
1572 LOG_DEBUG(" abits=%d", get_field(dtmcontrol, DTM_DTMCS_ABITS));
1573 LOG_DEBUG(" version=%d", get_field(dtmcontrol, DTM_DTMCS_VERSION));
1574 if (dtmcontrol == 0) {
1575 LOG_ERROR("dtmcontrol is 0. Check JTAG connectivity/board power.");
1578 if (get_field(dtmcontrol, DTM_DTMCS_VERSION) != 1) {
1579 LOG_ERROR("Unsupported DTM version %d. (dtmcontrol=0x%x)",
1580 get_field(dtmcontrol, DTM_DTMCS_VERSION), dtmcontrol);
1584 riscv013_info_t *info = get_info(target);
1585 /* TODO: This won't be true if there are multiple DMs. */
1586 info->index = target->coreid;
1587 info->abits = get_field(dtmcontrol, DTM_DTMCS_ABITS);
1588 info->dtmcs_idle = get_field(dtmcontrol, DTM_DTMCS_IDLE);
1590 /* Reset the Debug Module. */
1591 dm013_info_t *dm = get_dm(target);
1594 if (!dm->was_reset) {
1595 dmi_write(target, DM_DMCONTROL, 0);
1596 dmi_write(target, DM_DMCONTROL, DM_DMCONTROL_DMACTIVE);
1597 dm->was_reset = true;
1600 dmi_write(target, DM_DMCONTROL, DM_DMCONTROL_HARTSELLO |
1601 DM_DMCONTROL_HARTSELHI | DM_DMCONTROL_DMACTIVE |
1602 DM_DMCONTROL_HASEL);
1604 if (dmi_read(target, &dmcontrol, DM_DMCONTROL) != ERROR_OK)
1607 if (!get_field(dmcontrol, DM_DMCONTROL_DMACTIVE)) {
1608 LOG_ERROR("Debug Module did not become active. dmcontrol=0x%x",
1613 dm->hasel_supported = get_field(dmcontrol, DM_DMCONTROL_HASEL);
1616 if (dmstatus_read(target, &dmstatus, false) != ERROR_OK)
1618 LOG_DEBUG("dmstatus: 0x%08x", dmstatus);
1619 int dmstatus_version = get_field(dmstatus, DM_DMSTATUS_VERSION);
1620 if (dmstatus_version != 2 && dmstatus_version != 3) {
1621 /* Error was already printed out in dmstatus_read(). */
1626 (get_field(dmcontrol, DM_DMCONTROL_HARTSELHI) <<
1627 DM_DMCONTROL_HARTSELLO_LENGTH) |
1628 get_field(dmcontrol, DM_DMCONTROL_HARTSELLO);
1629 info->hartsellen = 0;
1630 while (hartsel & 1) {
1634 LOG_DEBUG("hartsellen=%d", info->hartsellen);
1637 if (dmi_read(target, &hartinfo, DM_HARTINFO) != ERROR_OK)
1640 info->datasize = get_field(hartinfo, DM_HARTINFO_DATASIZE);
1641 info->dataaccess = get_field(hartinfo, DM_HARTINFO_DATAACCESS);
1642 info->dataaddr = get_field(hartinfo, DM_HARTINFO_DATAADDR);
1644 if (!get_field(dmstatus, DM_DMSTATUS_AUTHENTICATED)) {
1645 LOG_ERROR("Debugger is not authenticated to target Debug Module. "
1646 "(dmstatus=0x%x). Use `riscv authdata_read` and "
1647 "`riscv authdata_write` commands to authenticate.", dmstatus);
1648 /* If we return ERROR_FAIL here, then in a multicore setup the next
1649 * core won't be examined, which means we won't set up the
1650 * authentication commands for them, which means the config script
1651 * needs to be a lot more complex. */
1655 if (dmi_read(target, &info->sbcs, DM_SBCS) != ERROR_OK)
1658 /* Check that abstract data registers are accessible. */
1659 uint32_t abstractcs;
1660 if (dmi_read(target, &abstractcs, DM_ABSTRACTCS) != ERROR_OK)
1662 info->datacount = get_field(abstractcs, DM_ABSTRACTCS_DATACOUNT);
1663 info->progbufsize = get_field(abstractcs, DM_ABSTRACTCS_PROGBUFSIZE);
1665 LOG_INFO("datacount=%d progbufsize=%d", info->datacount, info->progbufsize);
1668 r->impebreak = get_field(dmstatus, DM_DMSTATUS_IMPEBREAK);
1670 if (!has_sufficient_progbuf(target, 2)) {
1671 LOG_WARNING("We won't be able to execute fence instructions on this "
1672 "target. Memory may not always appear consistent. "
1673 "(progbufsize=%d, impebreak=%d)", info->progbufsize,
1677 if (info->progbufsize < 4 && riscv_enable_virtual) {
1678 LOG_ERROR("set_enable_virtual is not available on this target. It "
1679 "requires a program buffer size of at least 4. (progbufsize=%d) "
1680 "Use `riscv set_enable_virtual off` to continue."
1681 , info->progbufsize);
1684 /* Before doing anything else we must first enumerate the harts. */
1685 if (dm->hart_count < 0) {
1686 for (int i = 0; i < MIN(RISCV_MAX_HARTS, 1 << info->hartsellen); ++i) {
1687 r->current_hartid = i;
1688 if (riscv013_select_current_hart(target) != ERROR_OK)
1692 if (dmstatus_read(target, &s, true) != ERROR_OK)
1694 if (get_field(s, DM_DMSTATUS_ANYNONEXISTENT))
1696 dm->hart_count = i + 1;
1698 if (get_field(s, DM_DMSTATUS_ANYHAVERESET))
1699 dmi_write(target, DM_DMCONTROL,
1700 set_hartsel(DM_DMCONTROL_DMACTIVE | DM_DMCONTROL_ACKHAVERESET, i));
1703 LOG_DEBUG("Detected %d harts.", dm->hart_count);
1706 r->current_hartid = target->coreid;
1708 if (dm->hart_count == 0) {
1709 LOG_ERROR("No harts found!");
1713 /* Don't call any riscv_* functions until after we've counted the number of
1714 * cores and initialized registers. */
1716 if (riscv013_select_current_hart(target) != ERROR_OK)
1719 bool halted = riscv_is_halted(target);
1721 if (riscv013_halt_go(target) != ERROR_OK) {
1722 LOG_ERROR("Fatal: Hart %d failed to halt during examine()", r->current_hartid);
1727 /* Without knowing anything else we can at least mess with the
1728 * program buffer. */
1729 r->debug_buffer_size = info->progbufsize;
1731 int result = register_read_abstract(target, NULL, GDB_REGNO_S0, 64);
1732 if (result == ERROR_OK)
1737 if (register_read(target, &r->misa, GDB_REGNO_MISA)) {
1738 LOG_ERROR("Fatal: Failed to read MISA from hart %d.", r->current_hartid);
1742 if (riscv_supports_extension(target, 'V')) {
1743 if (discover_vlenb(target) != ERROR_OK)
1747 /* Now init registers based on what we discovered. */
1748 if (riscv_init_registers(target) != ERROR_OK)
1751 /* Display this as early as possible to help people who are using
1752 * really slow simulators. */
1753 LOG_DEBUG(" hart %d: XLEN=%d, misa=0x%" PRIx64, r->current_hartid, r->xlen,
1757 riscv013_step_or_resume_current_hart(target, false, false);
1759 target_set_examined(target);
1762 bool haltgroup_supported;
1763 if (set_haltgroup(target, &haltgroup_supported) != ERROR_OK)
1765 if (haltgroup_supported)
1766 LOG_INFO("Core %d made part of halt group %d.", target->coreid,
1769 LOG_INFO("Core %d could not be made part of halt group %d.",
1770 target->coreid, target->smp);
1773 /* Some regression suites rely on seeing 'Examined RISC-V core' to know
1774 * when they can connect with gdb/telnet.
1775 * We will need to update those suites if we want to change that text. */
1776 LOG_INFO("Examined RISC-V core; found %d harts",
1777 riscv_count_harts(target));
1778 LOG_INFO(" hart %d: XLEN=%d, misa=0x%" PRIx64, r->current_hartid, r->xlen,
1783 static int riscv013_authdata_read(struct target *target, uint32_t *value, unsigned int index)
1786 LOG_ERROR("Spec 0.13 only has a single authdata register.");
1790 if (wait_for_authbusy(target, NULL) != ERROR_OK)
1793 return dmi_read(target, value, DM_AUTHDATA);
1796 static int riscv013_authdata_write(struct target *target, uint32_t value, unsigned int index)
1799 LOG_ERROR("Spec 0.13 only has a single authdata register.");
1803 uint32_t before, after;
1804 if (wait_for_authbusy(target, &before) != ERROR_OK)
1807 dmi_write(target, DM_AUTHDATA, value);
1809 if (wait_for_authbusy(target, &after) != ERROR_OK)
1812 if (!get_field(before, DM_DMSTATUS_AUTHENTICATED) &&
1813 get_field(after, DM_DMSTATUS_AUTHENTICATED)) {
1814 LOG_INFO("authdata_write resulted in successful authentication");
1815 int result = ERROR_OK;
1816 dm013_info_t *dm = get_dm(target);
1819 target_list_t *entry;
1820 list_for_each_entry(entry, &dm->target_list, list) {
1821 if (examine(entry->target) != ERROR_OK)
1822 result = ERROR_FAIL;
1830 static int riscv013_hart_count(struct target *target)
1832 dm013_info_t *dm = get_dm(target);
1834 return dm->hart_count;
1837 /* Try to find out the widest memory access size depending on the selected memory access methods. */
1838 static unsigned riscv013_data_bits(struct target *target)
1840 RISCV013_INFO(info);
1843 for (unsigned int i = 0; i < RISCV_NUM_MEM_ACCESS_METHODS; i++) {
1844 int method = r->mem_access_methods[i];
1846 if (method == RISCV_MEM_ACCESS_PROGBUF) {
1847 if (has_sufficient_progbuf(target, 3))
1848 return riscv_xlen(target);
1849 } else if (method == RISCV_MEM_ACCESS_SYSBUS) {
1850 if (get_field(info->sbcs, DM_SBCS_SBACCESS128))
1852 if (get_field(info->sbcs, DM_SBCS_SBACCESS64))
1854 if (get_field(info->sbcs, DM_SBCS_SBACCESS32))
1856 if (get_field(info->sbcs, DM_SBCS_SBACCESS16))
1858 if (get_field(info->sbcs, DM_SBCS_SBACCESS8))
1860 } else if (method == RISCV_MEM_ACCESS_ABSTRACT) {
1861 /* TODO: Once there is a spec for discovering abstract commands, we can
1862 * take those into account as well. For now we assume abstract commands
1863 * support XLEN-wide accesses. */
1864 return riscv_xlen(target);
1865 } else if (method == RISCV_MEM_ACCESS_UNSPECIFIED)
1866 /* No further mem access method to try. */
1869 LOG_ERROR("Unable to determine supported data bits on this target. Assuming 32 bits.");
1873 COMMAND_HELPER(riscv013_print_info, struct target *target)
1875 RISCV013_INFO(info);
1877 /* Abstract description. */
1878 riscv_print_info_line(CMD, "target", "memory.read_while_running8", get_field(info->sbcs, DM_SBCS_SBACCESS8));
1879 riscv_print_info_line(CMD, "target", "memory.write_while_running8", get_field(info->sbcs, DM_SBCS_SBACCESS8));
1880 riscv_print_info_line(CMD, "target", "memory.read_while_running16", get_field(info->sbcs, DM_SBCS_SBACCESS16));
1881 riscv_print_info_line(CMD, "target", "memory.write_while_running16", get_field(info->sbcs, DM_SBCS_SBACCESS16));
1882 riscv_print_info_line(CMD, "target", "memory.read_while_running32", get_field(info->sbcs, DM_SBCS_SBACCESS32));
1883 riscv_print_info_line(CMD, "target", "memory.write_while_running32", get_field(info->sbcs, DM_SBCS_SBACCESS32));
1884 riscv_print_info_line(CMD, "target", "memory.read_while_running64", get_field(info->sbcs, DM_SBCS_SBACCESS64));
1885 riscv_print_info_line(CMD, "target", "memory.write_while_running64", get_field(info->sbcs, DM_SBCS_SBACCESS64));
1886 riscv_print_info_line(CMD, "target", "memory.read_while_running128", get_field(info->sbcs, DM_SBCS_SBACCESS128));
1887 riscv_print_info_line(CMD, "target", "memory.write_while_running128", get_field(info->sbcs, DM_SBCS_SBACCESS128));
1889 /* Lower level description. */
1890 riscv_print_info_line(CMD, "dm", "abits", info->abits);
1891 riscv_print_info_line(CMD, "dm", "progbufsize", info->progbufsize);
1892 riscv_print_info_line(CMD, "dm", "sbversion", get_field(info->sbcs, DM_SBCS_SBVERSION));
1893 riscv_print_info_line(CMD, "dm", "sbasize", get_field(info->sbcs, DM_SBCS_SBASIZE));
1894 riscv_print_info_line(CMD, "dm", "sbaccess128", get_field(info->sbcs, DM_SBCS_SBACCESS128));
1895 riscv_print_info_line(CMD, "dm", "sbaccess64", get_field(info->sbcs, DM_SBCS_SBACCESS64));
1896 riscv_print_info_line(CMD, "dm", "sbaccess32", get_field(info->sbcs, DM_SBCS_SBACCESS32));
1897 riscv_print_info_line(CMD, "dm", "sbaccess16", get_field(info->sbcs, DM_SBCS_SBACCESS16));
1898 riscv_print_info_line(CMD, "dm", "sbaccess8", get_field(info->sbcs, DM_SBCS_SBACCESS8));
1901 if (dmstatus_read(target, &dmstatus, false) == ERROR_OK)
1902 riscv_print_info_line(CMD, "dm", "authenticated", get_field(dmstatus, DM_DMSTATUS_AUTHENTICATED));
1907 static int prep_for_vector_access(struct target *target, uint64_t *vtype,
1908 uint64_t *vl, unsigned *debug_vl)
1911 /* TODO: this continuous save/restore is terrible for performance. */
1912 /* Write vtype and vl. */
1913 unsigned encoded_vsew;
1914 switch (riscv_xlen(target)) {
1922 LOG_ERROR("Unsupported xlen: %d", riscv_xlen(target));
1926 /* Save vtype and vl. */
1927 if (register_read(target, vtype, GDB_REGNO_VTYPE) != ERROR_OK)
1929 if (register_read(target, vl, GDB_REGNO_VL) != ERROR_OK)
1932 if (register_write_direct(target, GDB_REGNO_VTYPE, encoded_vsew << 3) != ERROR_OK)
1934 *debug_vl = DIV_ROUND_UP(r->vlenb * 8, riscv_xlen(target));
1935 if (register_write_direct(target, GDB_REGNO_VL, *debug_vl) != ERROR_OK)
1941 static int cleanup_after_vector_access(struct target *target, uint64_t vtype,
1944 /* Restore vtype and vl. */
1945 if (register_write_direct(target, GDB_REGNO_VTYPE, vtype) != ERROR_OK)
1947 if (register_write_direct(target, GDB_REGNO_VL, vl) != ERROR_OK)
1952 static int riscv013_get_register_buf(struct target *target,
1953 uint8_t *value, int regno)
1955 assert(regno >= GDB_REGNO_V0 && regno <= GDB_REGNO_V31);
1957 if (riscv_select_current_hart(target) != ERROR_OK)
1961 if (register_read(target, &s0, GDB_REGNO_S0) != ERROR_OK)
1965 if (prep_for_register_access(target, &mstatus, regno) != ERROR_OK)
1970 if (prep_for_vector_access(target, &vtype, &vl, &debug_vl) != ERROR_OK)
1973 unsigned vnum = regno - GDB_REGNO_V0;
1974 unsigned xlen = riscv_xlen(target);
1976 struct riscv_program program;
1977 riscv_program_init(&program, target);
1978 riscv_program_insert(&program, vmv_x_s(S0, vnum));
1979 riscv_program_insert(&program, vslide1down_vx(vnum, vnum, S0, true));
1981 int result = ERROR_OK;
1982 for (unsigned i = 0; i < debug_vl; i++) {
1983 /* Executing the program might result in an exception if there is some
1984 * issue with the vector implementation/instructions we're using. If that
1985 * happens, attempt to restore as usual. We may have clobbered the
1986 * vector register we tried to read already.
1987 * For other failures, we just return error because things are probably
1988 * so messed up that attempting to restore isn't going to help. */
1989 result = riscv_program_exec(&program, target);
1990 if (result == ERROR_OK) {
1992 if (register_read_direct(target, &v, GDB_REGNO_S0) != ERROR_OK)
1994 buf_set_u64(value, xlen * i, xlen, v);
2000 if (cleanup_after_vector_access(target, vtype, vl) != ERROR_OK)
2003 if (cleanup_after_register_access(target, mstatus, regno) != ERROR_OK)
2005 if (register_write_direct(target, GDB_REGNO_S0, s0) != ERROR_OK)
2011 static int riscv013_set_register_buf(struct target *target,
2012 int regno, const uint8_t *value)
2014 assert(regno >= GDB_REGNO_V0 && regno <= GDB_REGNO_V31);
2016 if (riscv_select_current_hart(target) != ERROR_OK)
2020 if (register_read(target, &s0, GDB_REGNO_S0) != ERROR_OK)
2024 if (prep_for_register_access(target, &mstatus, regno) != ERROR_OK)
2029 if (prep_for_vector_access(target, &vtype, &vl, &debug_vl) != ERROR_OK)
2032 unsigned vnum = regno - GDB_REGNO_V0;
2033 unsigned xlen = riscv_xlen(target);
2035 struct riscv_program program;
2036 riscv_program_init(&program, target);
2037 riscv_program_insert(&program, vslide1down_vx(vnum, vnum, S0, true));
2038 int result = ERROR_OK;
2039 for (unsigned i = 0; i < debug_vl; i++) {
2040 if (register_write_direct(target, GDB_REGNO_S0,
2041 buf_get_u64(value, xlen * i, xlen)) != ERROR_OK)
2043 result = riscv_program_exec(&program, target);
2044 if (result != ERROR_OK)
2048 if (cleanup_after_vector_access(target, vtype, vl) != ERROR_OK)
2051 if (cleanup_after_register_access(target, mstatus, regno) != ERROR_OK)
2053 if (register_write_direct(target, GDB_REGNO_S0, s0) != ERROR_OK)
2059 static uint32_t sb_sbaccess(unsigned int size_bytes)
2061 switch (size_bytes) {
2063 return set_field(0, DM_SBCS_SBACCESS, 0);
2065 return set_field(0, DM_SBCS_SBACCESS, 1);
2067 return set_field(0, DM_SBCS_SBACCESS, 2);
2069 return set_field(0, DM_SBCS_SBACCESS, 3);
2071 return set_field(0, DM_SBCS_SBACCESS, 4);
2077 static int sb_write_address(struct target *target, target_addr_t address,
2078 bool ensure_success)
2080 RISCV013_INFO(info);
2081 unsigned int sbasize = get_field(info->sbcs, DM_SBCS_SBASIZE);
2082 /* There currently is no support for >64-bit addresses in OpenOCD. */
2084 dmi_op(target, NULL, NULL, DMI_OP_WRITE, DM_SBADDRESS3, 0, false, false);
2086 dmi_op(target, NULL, NULL, DMI_OP_WRITE, DM_SBADDRESS2, 0, false, false);
2088 dmi_op(target, NULL, NULL, DMI_OP_WRITE, DM_SBADDRESS1, address >> 32, false, false);
2089 return dmi_op(target, NULL, NULL, DMI_OP_WRITE, DM_SBADDRESS0, address,
2090 false, ensure_success);
2093 static int batch_run(const struct target *target, struct riscv_batch *batch)
2095 RISCV013_INFO(info);
2097 if (r->reset_delays_wait >= 0) {
2098 r->reset_delays_wait -= batch->used_scans;
2099 if (r->reset_delays_wait <= 0) {
2100 batch->idle_count = 0;
2101 info->dmi_busy_delay = 0;
2102 info->ac_busy_delay = 0;
2105 return riscv_batch_run(batch);
2108 static int sba_supports_access(struct target *target, unsigned int size_bytes)
2110 RISCV013_INFO(info);
2111 switch (size_bytes) {
2113 return get_field(info->sbcs, DM_SBCS_SBACCESS8);
2115 return get_field(info->sbcs, DM_SBCS_SBACCESS16);
2117 return get_field(info->sbcs, DM_SBCS_SBACCESS32);
2119 return get_field(info->sbcs, DM_SBCS_SBACCESS64);
2121 return get_field(info->sbcs, DM_SBCS_SBACCESS128);
2127 static int sample_memory_bus_v1(struct target *target,
2128 struct riscv_sample_buf *buf,
2129 const riscv_sample_config_t *config,
2132 RISCV013_INFO(info);
2133 unsigned int sbasize = get_field(info->sbcs, DM_SBCS_SBASIZE);
2135 LOG_ERROR("Memory sampling is only implemented for sbasize <= 64.");
2136 return ERROR_NOT_IMPLEMENTED;
2139 if (get_field(info->sbcs, DM_SBCS_SBVERSION) != 1) {
2140 LOG_ERROR("Memory sampling is only implemented for SBA version 1.");
2141 return ERROR_NOT_IMPLEMENTED;
2145 uint32_t sbcs_valid = false;
2147 uint32_t sbaddress0 = 0;
2148 bool sbaddress0_valid = false;
2149 uint32_t sbaddress1 = 0;
2150 bool sbaddress1_valid = false;
2152 /* How often to read each value in a batch. */
2153 const unsigned int repeat = 5;
2155 unsigned int enabled_count = 0;
2156 for (unsigned int i = 0; i < ARRAY_SIZE(config->bucket); i++) {
2157 if (config->bucket[i].enabled)
2161 while (timeval_ms() < until_ms) {
2163 * batch_run() adds to the batch, so we can't simply reuse the same
2164 * batch over and over. So we create a new one every time through the
2167 struct riscv_batch *batch = riscv_batch_alloc(
2168 target, 1 + enabled_count * 5 * repeat,
2169 info->dmi_busy_delay + info->bus_master_read_delay);
2173 unsigned int result_bytes = 0;
2174 for (unsigned int n = 0; n < repeat; n++) {
2175 for (unsigned int i = 0; i < ARRAY_SIZE(config->bucket); i++) {
2176 if (config->bucket[i].enabled) {
2177 if (!sba_supports_access(target, config->bucket[i].size_bytes)) {
2178 LOG_ERROR("Hardware does not support SBA access for %d-byte memory sampling.",
2179 config->bucket[i].size_bytes);
2180 return ERROR_NOT_IMPLEMENTED;
2183 uint32_t sbcs_write = DM_SBCS_SBREADONADDR;
2184 if (enabled_count == 1)
2185 sbcs_write |= DM_SBCS_SBREADONDATA;
2186 sbcs_write |= sb_sbaccess(config->bucket[i].size_bytes);
2187 if (!sbcs_valid || sbcs_write != sbcs) {
2188 riscv_batch_add_dmi_write(batch, DM_SBCS, sbcs_write);
2194 (!sbaddress1_valid ||
2195 sbaddress1 != config->bucket[i].address >> 32)) {
2196 sbaddress1 = config->bucket[i].address >> 32;
2197 riscv_batch_add_dmi_write(batch, DM_SBADDRESS1, sbaddress1);
2198 sbaddress1_valid = true;
2200 if (!sbaddress0_valid ||
2201 sbaddress0 != (config->bucket[i].address & 0xffffffff)) {
2202 sbaddress0 = config->bucket[i].address;
2203 riscv_batch_add_dmi_write(batch, DM_SBADDRESS0, sbaddress0);
2204 sbaddress0_valid = true;
2206 if (config->bucket[i].size_bytes > 4)
2207 riscv_batch_add_dmi_read(batch, DM_SBDATA1);
2208 riscv_batch_add_dmi_read(batch, DM_SBDATA0);
2209 result_bytes += 1 + config->bucket[i].size_bytes;
2214 if (buf->used + result_bytes >= buf->size) {
2215 riscv_batch_free(batch);
2219 size_t sbcs_key = riscv_batch_add_dmi_read(batch, DM_SBCS);
2221 int result = batch_run(target, batch);
2222 if (result != ERROR_OK)
2225 uint32_t sbcs_read = riscv_batch_get_dmi_read_data(batch, sbcs_key);
2226 if (get_field(sbcs_read, DM_SBCS_SBBUSYERROR)) {
2227 /* Discard this batch (too much hassle to try to recover partial
2228 * data) and try again with a larger delay. */
2229 info->bus_master_read_delay += info->bus_master_read_delay / 10 + 1;
2230 dmi_write(target, DM_SBCS, sbcs_read | DM_SBCS_SBBUSYERROR | DM_SBCS_SBERROR);
2231 riscv_batch_free(batch);
2234 if (get_field(sbcs_read, DM_SBCS_SBERROR)) {
2235 /* The memory we're sampling was unreadable, somehow. Give up. */
2236 dmi_write(target, DM_SBCS, DM_SBCS_SBBUSYERROR | DM_SBCS_SBERROR);
2237 riscv_batch_free(batch);
2241 unsigned int read = 0;
2242 for (unsigned int n = 0; n < repeat; n++) {
2243 for (unsigned int i = 0; i < ARRAY_SIZE(config->bucket); i++) {
2244 if (config->bucket[i].enabled) {
2245 assert(i < RISCV_SAMPLE_BUF_TIMESTAMP_BEFORE);
2247 if (config->bucket[i].size_bytes > 4)
2248 value = ((uint64_t)riscv_batch_get_dmi_read_data(batch, read++)) << 32;
2249 value |= riscv_batch_get_dmi_read_data(batch, read++);
2251 buf->buf[buf->used] = i;
2252 buf_set_u64(buf->buf + buf->used + 1, 0, config->bucket[i].size_bytes * 8, value);
2253 buf->used += 1 + config->bucket[i].size_bytes;
2258 riscv_batch_free(batch);
2264 static int sample_memory(struct target *target,
2265 struct riscv_sample_buf *buf,
2266 riscv_sample_config_t *config,
2269 if (!config->enabled)
2272 return sample_memory_bus_v1(target, buf, config, until_ms);
2275 static int init_target(struct command_context *cmd_ctx,
2276 struct target *target)
2279 RISCV_INFO(generic_info);
2281 generic_info->get_register = &riscv013_get_register;
2282 generic_info->set_register = &riscv013_set_register;
2283 generic_info->get_register_buf = &riscv013_get_register_buf;
2284 generic_info->set_register_buf = &riscv013_set_register_buf;
2285 generic_info->select_current_hart = &riscv013_select_current_hart;
2286 generic_info->is_halted = &riscv013_is_halted;
2287 generic_info->resume_go = &riscv013_resume_go;
2288 generic_info->step_current_hart = &riscv013_step_current_hart;
2289 generic_info->on_halt = &riscv013_on_halt;
2290 generic_info->resume_prep = &riscv013_resume_prep;
2291 generic_info->halt_prep = &riscv013_halt_prep;
2292 generic_info->halt_go = &riscv013_halt_go;
2293 generic_info->on_step = &riscv013_on_step;
2294 generic_info->halt_reason = &riscv013_halt_reason;
2295 generic_info->read_debug_buffer = &riscv013_read_debug_buffer;
2296 generic_info->write_debug_buffer = &riscv013_write_debug_buffer;
2297 generic_info->execute_debug_buffer = &riscv013_execute_debug_buffer;
2298 generic_info->fill_dmi_write_u64 = &riscv013_fill_dmi_write_u64;
2299 generic_info->fill_dmi_read_u64 = &riscv013_fill_dmi_read_u64;
2300 generic_info->fill_dmi_nop_u64 = &riscv013_fill_dmi_nop_u64;
2301 generic_info->dmi_write_u64_bits = &riscv013_dmi_write_u64_bits;
2302 generic_info->authdata_read = &riscv013_authdata_read;
2303 generic_info->authdata_write = &riscv013_authdata_write;
2304 generic_info->dmi_read = &dmi_read;
2305 generic_info->dmi_write = &dmi_write;
2306 generic_info->read_memory = read_memory;
2307 generic_info->test_sba_config_reg = &riscv013_test_sba_config_reg;
2308 generic_info->hart_count = &riscv013_hart_count;
2309 generic_info->data_bits = &riscv013_data_bits;
2310 generic_info->print_info = &riscv013_print_info;
2311 if (!generic_info->version_specific) {
2312 generic_info->version_specific = calloc(1, sizeof(riscv013_info_t));
2313 if (!generic_info->version_specific)
2316 generic_info->sample_memory = sample_memory;
2317 riscv013_info_t *info = get_info(target);
2319 info->progbufsize = -1;
2321 info->dmi_busy_delay = 0;
2322 info->bus_master_read_delay = 0;
2323 info->bus_master_write_delay = 0;
2324 info->ac_busy_delay = 0;
2326 /* Assume all these abstract commands are supported until we learn
2328 * TODO: The spec allows eg. one CSR to be able to be accessed abstractly
2329 * while another one isn't. We don't track that this closely here, but in
2330 * the future we probably should. */
2331 info->abstract_read_csr_supported = true;
2332 info->abstract_write_csr_supported = true;
2333 info->abstract_read_fpr_supported = true;
2334 info->abstract_write_fpr_supported = true;
2336 info->has_aampostincrement = YNM_MAYBE;
2341 static int assert_reset(struct target *target)
2347 uint32_t control_base = set_field(0, DM_DMCONTROL_DMACTIVE, 1);
2349 if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
2350 /* Run the user-supplied script if there is one. */
2351 target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
2352 } else if (target->rtos) {
2353 /* There's only one target, and OpenOCD thinks each hart is a thread.
2354 * We must reset them all. */
2356 /* TODO: Try to use hasel in dmcontrol */
2358 /* Set haltreq for each hart. */
2359 uint32_t control = control_base;
2361 control = set_hartsel(control_base, target->coreid);
2362 control = set_field(control, DM_DMCONTROL_HALTREQ,
2363 target->reset_halt ? 1 : 0);
2364 dmi_write(target, DM_DMCONTROL, control);
2366 /* Assert ndmreset */
2367 control = set_field(control, DM_DMCONTROL_NDMRESET, 1);
2368 dmi_write(target, DM_DMCONTROL, control);
2371 /* Reset just this hart. */
2372 uint32_t control = set_hartsel(control_base, r->current_hartid);
2373 control = set_field(control, DM_DMCONTROL_HALTREQ,
2374 target->reset_halt ? 1 : 0);
2375 control = set_field(control, DM_DMCONTROL_NDMRESET, 1);
2376 dmi_write(target, DM_DMCONTROL, control);
2379 target->state = TARGET_RESET;
2381 dm013_info_t *dm = get_dm(target);
2385 /* The DM might have gotten reset if OpenOCD called us in some reset that
2386 * involves SRST being toggled. So clear our cache which may be out of
2388 memset(dm->progbuf_cache, 0, sizeof(dm->progbuf_cache));
2393 static int deassert_reset(struct target *target)
2396 RISCV013_INFO(info);
2399 /* Clear the reset, but make sure haltreq is still set */
2400 uint32_t control = 0, control_haltreq;
2401 control = set_field(control, DM_DMCONTROL_DMACTIVE, 1);
2402 control_haltreq = set_field(control, DM_DMCONTROL_HALTREQ, target->reset_halt ? 1 : 0);
2403 dmi_write(target, DM_DMCONTROL,
2404 set_hartsel(control_haltreq, r->current_hartid));
2407 int dmi_busy_delay = info->dmi_busy_delay;
2408 time_t start = time(NULL);
2410 for (int i = 0; i < riscv_count_harts(target); ++i) {
2413 if (index != target->coreid)
2415 dmi_write(target, DM_DMCONTROL,
2416 set_hartsel(control_haltreq, index));
2418 index = r->current_hartid;
2421 LOG_DEBUG("Waiting for hart %d to come out of reset.", index);
2423 int result = dmstatus_read_timeout(target, &dmstatus, true,
2424 riscv_reset_timeout_sec);
2425 if (result == ERROR_TIMEOUT_REACHED)
2426 LOG_ERROR("Hart %d didn't complete a DMI read coming out of "
2427 "reset in %ds; Increase the timeout with riscv "
2428 "set_reset_timeout_sec.",
2429 index, riscv_reset_timeout_sec);
2430 if (result != ERROR_OK)
2432 /* Certain debug modules, like the one in GD32VF103
2433 * MCUs, violate the specification's requirement that
2434 * each hart is in "exactly one of four states" and,
2435 * during reset, report harts as both unavailable and
2436 * halted/running. To work around this, we check for
2437 * the absence of the unavailable state rather than
2438 * the presence of any other state. */
2439 if (!get_field(dmstatus, DM_DMSTATUS_ALLUNAVAIL))
2441 if (time(NULL) - start > riscv_reset_timeout_sec) {
2442 LOG_ERROR("Hart %d didn't leave reset in %ds; "
2444 "Increase the timeout with riscv set_reset_timeout_sec.",
2445 index, riscv_reset_timeout_sec, dmstatus);
2449 target->state = TARGET_HALTED;
2451 if (get_field(dmstatus, DM_DMSTATUS_ALLHAVERESET)) {
2452 /* Ack reset and clear DM_DMCONTROL_HALTREQ if previously set */
2453 dmi_write(target, DM_DMCONTROL,
2454 set_hartsel(control, index) |
2455 DM_DMCONTROL_ACKHAVERESET);
2461 info->dmi_busy_delay = dmi_busy_delay;
2465 static int execute_fence(struct target *target)
2467 /* FIXME: For non-coherent systems we need to flush the caches right
2468 * here, but there's no ISA-defined way of doing that. */
2470 struct riscv_program program;
2471 riscv_program_init(&program, target);
2472 riscv_program_fence_i(&program);
2473 riscv_program_fence(&program);
2474 int result = riscv_program_exec(&program, target);
2475 if (result != ERROR_OK)
2476 LOG_DEBUG("Unable to execute pre-fence");
2482 static void log_memory_access(target_addr_t address, uint64_t value,
2483 unsigned size_bytes, bool read)
2485 if (debug_level < LOG_LVL_DEBUG)
2489 sprintf(fmt, "M[0x%" TARGET_PRIxADDR "] %ss 0x%%0%d" PRIx64,
2490 address, read ? "read" : "write", size_bytes * 2);
2491 switch (size_bytes) {
2499 value &= 0xffffffffUL;
2506 LOG_DEBUG(fmt, value);
2509 /* Read the relevant sbdata regs depending on size, and put the results into
2511 static int read_memory_bus_word(struct target *target, target_addr_t address,
2512 uint32_t size, uint8_t *buffer)
2516 static int sbdata[4] = { DM_SBDATA0, DM_SBDATA1, DM_SBDATA2, DM_SBDATA3 };
2518 for (int i = (size - 1) / 4; i >= 0; i--) {
2519 result = dmi_op(target, &value, NULL, DMI_OP_READ, sbdata[i], 0, false, true);
2520 if (result != ERROR_OK)
2522 buf_set_u32(buffer + i * 4, 0, 8 * MIN(size, 4), value);
2523 log_memory_access(address + i * 4, value, MIN(size, 4), true);
2528 static target_addr_t sb_read_address(struct target *target)
2530 RISCV013_INFO(info);
2531 unsigned sbasize = get_field(info->sbcs, DM_SBCS_SBASIZE);
2532 target_addr_t address = 0;
2535 dmi_read(target, &v, DM_SBADDRESS1);
2539 dmi_read(target, &v, DM_SBADDRESS0);
2544 static int read_sbcs_nonbusy(struct target *target, uint32_t *sbcs)
2546 time_t start = time(NULL);
2548 if (dmi_read(target, sbcs, DM_SBCS) != ERROR_OK)
2550 if (!get_field(*sbcs, DM_SBCS_SBBUSY))
2552 if (time(NULL) - start > riscv_command_timeout_sec) {
2553 LOG_ERROR("Timed out after %ds waiting for sbbusy to go low (sbcs=0x%x). "
2554 "Increase the timeout with riscv set_command_timeout_sec.",
2555 riscv_command_timeout_sec, *sbcs);
2561 static int modify_privilege(struct target *target, uint64_t *mstatus, uint64_t *mstatus_old)
2563 if (riscv_enable_virtual && has_sufficient_progbuf(target, 5)) {
2566 if (register_read(target, &dcsr, GDB_REGNO_DCSR) != ERROR_OK)
2569 /* Read and save MSTATUS */
2570 if (register_read(target, mstatus, GDB_REGNO_MSTATUS) != ERROR_OK)
2572 *mstatus_old = *mstatus;
2574 /* If we come from m-mode with mprv set, we want to keep mpp */
2575 if (get_field(dcsr, DCSR_PRV) < 3) {
2577 *mstatus = set_field(*mstatus, MSTATUS_MPP, get_field(dcsr, DCSR_PRV));
2580 *mstatus = set_field(*mstatus, MSTATUS_MPRV, 1);
2583 if (*mstatus != *mstatus_old)
2584 if (register_write_direct(target, GDB_REGNO_MSTATUS, *mstatus) != ERROR_OK)
2592 static int read_memory_bus_v0(struct target *target, target_addr_t address,
2593 uint32_t size, uint32_t count, uint8_t *buffer, uint32_t increment)
2595 if (size != increment) {
2596 LOG_ERROR("sba v0 reads only support size==increment");
2597 return ERROR_NOT_IMPLEMENTED;
2600 LOG_DEBUG("System Bus Access: size: %d\tcount:%d\tstart address: 0x%08"
2601 TARGET_PRIxADDR, size, count, address);
2602 uint8_t *t_buffer = buffer;
2603 riscv_addr_t cur_addr = address;
2604 riscv_addr_t fin_addr = address + (count * size);
2605 uint32_t access = 0;
2607 const int DM_SBCS_SBSINGLEREAD_OFFSET = 20;
2608 const uint32_t DM_SBCS_SBSINGLEREAD = (0x1U << DM_SBCS_SBSINGLEREAD_OFFSET);
2610 const int DM_SBCS_SBAUTOREAD_OFFSET = 15;
2611 const uint32_t DM_SBCS_SBAUTOREAD = (0x1U << DM_SBCS_SBAUTOREAD_OFFSET);
2613 /* ww favorise one off reading if there is an issue */
2615 for (uint32_t i = 0; i < count; i++) {
2616 if (dmi_read(target, &access, DM_SBCS) != ERROR_OK)
2618 dmi_write(target, DM_SBADDRESS0, cur_addr);
2619 /* size/2 matching the bit access of the spec 0.13 */
2620 access = set_field(access, DM_SBCS_SBACCESS, size/2);
2621 access = set_field(access, DM_SBCS_SBSINGLEREAD, 1);
2622 LOG_DEBUG("\r\nread_memory: sab: access: 0x%08x", access);
2623 dmi_write(target, DM_SBCS, access);
2626 if (dmi_read(target, &value, DM_SBDATA0) != ERROR_OK)
2628 LOG_DEBUG("\r\nread_memory: sab: value: 0x%08x", value);
2629 buf_set_u32(t_buffer, 0, 8 * size, value);
2636 /* has to be the same size if we want to read a block */
2637 LOG_DEBUG("reading block until final address 0x%" PRIx64, fin_addr);
2638 if (dmi_read(target, &access, DM_SBCS) != ERROR_OK)
2640 /* set current address */
2641 dmi_write(target, DM_SBADDRESS0, cur_addr);
2642 /* 2) write sbaccess=2, sbsingleread,sbautoread,sbautoincrement
2643 * size/2 matching the bit access of the spec 0.13 */
2644 access = set_field(access, DM_SBCS_SBACCESS, size/2);
2645 access = set_field(access, DM_SBCS_SBAUTOREAD, 1);
2646 access = set_field(access, DM_SBCS_SBSINGLEREAD, 1);
2647 access = set_field(access, DM_SBCS_SBAUTOINCREMENT, 1);
2648 LOG_DEBUG("\r\naccess: 0x%08x", access);
2649 dmi_write(target, DM_SBCS, access);
2651 while (cur_addr < fin_addr) {
2652 LOG_DEBUG("\r\nsab:autoincrement: \r\n size: %d\tcount:%d\taddress: 0x%08"
2653 PRIx64, size, count, cur_addr);
2656 if (dmi_read(target, &value, DM_SBDATA0) != ERROR_OK)
2658 buf_set_u32(t_buffer, 0, 8 * size, value);
2662 /* if we are reaching last address, we must clear autoread */
2663 if (cur_addr == fin_addr && count != 1) {
2664 dmi_write(target, DM_SBCS, 0);
2665 if (dmi_read(target, &value, DM_SBDATA0) != ERROR_OK)
2667 buf_set_u32(t_buffer, 0, 8 * size, value);
2672 if (dmi_read(target, &sbcs, DM_SBCS) != ERROR_OK)
2679 * Read the requested memory using the system bus interface.
2681 static int read_memory_bus_v1(struct target *target, target_addr_t address,
2682 uint32_t size, uint32_t count, uint8_t *buffer, uint32_t increment)
2684 if (increment != size && increment != 0) {
2685 LOG_ERROR("sba v1 reads only support increment of size or 0");
2686 return ERROR_NOT_IMPLEMENTED;
2689 RISCV013_INFO(info);
2690 target_addr_t next_address = address;
2691 target_addr_t end_address = address + count * size;
2693 while (next_address < end_address) {
2694 uint32_t sbcs_write = set_field(0, DM_SBCS_SBREADONADDR, 1);
2695 sbcs_write |= sb_sbaccess(size);
2696 if (increment == size)
2697 sbcs_write = set_field(sbcs_write, DM_SBCS_SBAUTOINCREMENT, 1);
2699 sbcs_write = set_field(sbcs_write, DM_SBCS_SBREADONDATA, count > 1);
2700 if (dmi_write(target, DM_SBCS, sbcs_write) != ERROR_OK)
2703 /* This address write will trigger the first read. */
2704 if (sb_write_address(target, next_address, true) != ERROR_OK)
2707 if (info->bus_master_read_delay) {
2708 jtag_add_runtest(info->bus_master_read_delay, TAP_IDLE);
2709 if (jtag_execute_queue() != ERROR_OK) {
2710 LOG_ERROR("Failed to scan idle sequence");
2715 /* First value has been read, and is waiting for us to issue a DMI read
2718 static int sbdata[4] = {DM_SBDATA0, DM_SBDATA1, DM_SBDATA2, DM_SBDATA3};
2720 target_addr_t next_read = address - 1;
2721 for (uint32_t i = (next_address - address) / size; i < count - 1; i++) {
2722 for (int j = (size - 1) / 4; j >= 0; j--) {
2724 unsigned attempt = 0;
2726 if (attempt++ > 100) {
2727 LOG_ERROR("DMI keeps being busy in while reading memory just past " TARGET_ADDR_FMT,
2732 dmi_status_t status = dmi_scan(target, NULL, &value,
2733 DMI_OP_READ, sbdata[j], 0, false);
2734 if (status == DMI_STATUS_BUSY)
2735 increase_dmi_busy_delay(target);
2736 else if (status == DMI_STATUS_SUCCESS)
2741 if (next_read != address - 1) {
2742 buf_set_u32(buffer + next_read - address, 0, 8 * MIN(size, 4), value);
2743 log_memory_access(next_read, value, MIN(size, 4), true);
2745 next_read = address + i * size + j * 4;
2749 uint32_t sbcs_read = 0;
2752 unsigned attempt = 0;
2754 if (attempt++ > 100) {
2755 LOG_ERROR("DMI keeps being busy in while reading memory just past " TARGET_ADDR_FMT,
2759 dmi_status_t status = dmi_scan(target, NULL, &value, DMI_OP_NOP, 0, 0, false);
2760 if (status == DMI_STATUS_BUSY)
2761 increase_dmi_busy_delay(target);
2762 else if (status == DMI_STATUS_SUCCESS)
2767 buf_set_u32(buffer + next_read - address, 0, 8 * MIN(size, 4), value);
2768 log_memory_access(next_read, value, MIN(size, 4), true);
2770 /* "Writes to sbcs while sbbusy is high result in undefined behavior.
2771 * A debugger must not write to sbcs until it reads sbbusy as 0." */
2772 if (read_sbcs_nonbusy(target, &sbcs_read) != ERROR_OK)
2775 sbcs_write = set_field(sbcs_write, DM_SBCS_SBREADONDATA, 0);
2776 if (dmi_write(target, DM_SBCS, sbcs_write) != ERROR_OK)
2780 /* Read the last word, after we disabled sbreadondata if necessary. */
2781 if (!get_field(sbcs_read, DM_SBCS_SBERROR) &&
2782 !get_field(sbcs_read, DM_SBCS_SBBUSYERROR)) {
2783 if (read_memory_bus_word(target, address + (count - 1) * size, size,
2784 buffer + (count - 1) * size) != ERROR_OK)
2787 if (read_sbcs_nonbusy(target, &sbcs_read) != ERROR_OK)
2791 if (get_field(sbcs_read, DM_SBCS_SBBUSYERROR)) {
2792 /* We read while the target was busy. Slow down and try again. */
2793 if (dmi_write(target, DM_SBCS, sbcs_read | DM_SBCS_SBBUSYERROR) != ERROR_OK)
2795 next_address = sb_read_address(target);
2796 info->bus_master_read_delay += info->bus_master_read_delay / 10 + 1;
2800 unsigned error = get_field(sbcs_read, DM_SBCS_SBERROR);
2802 next_address = end_address;
2804 /* Some error indicating the bus access failed, but not because of
2805 * something we did wrong. */
2806 if (dmi_write(target, DM_SBCS, DM_SBCS_SBERROR) != ERROR_OK)
2815 static void log_mem_access_result(struct target *target, bool success, int method, bool read)
2821 /* Compose the message */
2822 snprintf(msg, 60, "%s to %s memory via %s.",
2823 success ? "Succeeded" : "Failed",
2824 read ? "read" : "write",
2825 (method == RISCV_MEM_ACCESS_PROGBUF) ? "program buffer" :
2826 (method == RISCV_MEM_ACCESS_SYSBUS) ? "system bus" : "abstract access");
2828 /* Determine the log message severity. Show warnings only once. */
2830 if (method == RISCV_MEM_ACCESS_PROGBUF) {
2831 warn = r->mem_access_progbuf_warn;
2832 r->mem_access_progbuf_warn = false;
2834 if (method == RISCV_MEM_ACCESS_SYSBUS) {
2835 warn = r->mem_access_sysbus_warn;
2836 r->mem_access_sysbus_warn = false;
2838 if (method == RISCV_MEM_ACCESS_ABSTRACT) {
2839 warn = r->mem_access_abstract_warn;
2840 r->mem_access_abstract_warn = false;
2845 LOG_WARNING("%s", msg);
2847 LOG_DEBUG("%s", msg);
2850 static bool mem_should_skip_progbuf(struct target *target, target_addr_t address,
2851 uint32_t size, bool read, char **skip_reason)
2853 assert(skip_reason);
2855 if (!has_sufficient_progbuf(target, 3)) {
2856 LOG_DEBUG("Skipping mem %s via progbuf - insufficient progbuf size.",
2857 read ? "read" : "write");
2858 *skip_reason = "skipped (insufficient progbuf)";
2861 if (target->state != TARGET_HALTED) {
2862 LOG_DEBUG("Skipping mem %s via progbuf - target not halted.",
2863 read ? "read" : "write");
2864 *skip_reason = "skipped (target not halted)";
2867 if (riscv_xlen(target) < size * 8) {
2868 LOG_DEBUG("Skipping mem %s via progbuf - XLEN (%d) is too short for %d-bit memory access.",
2869 read ? "read" : "write", riscv_xlen(target), size * 8);
2870 *skip_reason = "skipped (XLEN too short)";
2874 LOG_DEBUG("Skipping mem %s via progbuf - unsupported size.",
2875 read ? "read" : "write");
2876 *skip_reason = "skipped (unsupported size)";
2879 if ((sizeof(address) * 8 > riscv_xlen(target)) && (address >> riscv_xlen(target))) {
2880 LOG_DEBUG("Skipping mem %s via progbuf - progbuf only supports %u-bit address.",
2881 read ? "read" : "write", riscv_xlen(target));
2882 *skip_reason = "skipped (too large address)";
2889 static bool mem_should_skip_sysbus(struct target *target, target_addr_t address,
2890 uint32_t size, uint32_t increment, bool read, char **skip_reason)
2892 assert(skip_reason);
2894 RISCV013_INFO(info);
2895 if (!sba_supports_access(target, size)) {
2896 LOG_DEBUG("Skipping mem %s via system bus - unsupported size.",
2897 read ? "read" : "write");
2898 *skip_reason = "skipped (unsupported size)";
2901 unsigned int sbasize = get_field(info->sbcs, DM_SBCS_SBASIZE);
2902 if ((sizeof(address) * 8 > sbasize) && (address >> sbasize)) {
2903 LOG_DEBUG("Skipping mem %s via system bus - sba only supports %u-bit address.",
2904 read ? "read" : "write", sbasize);
2905 *skip_reason = "skipped (too large address)";
2908 if (read && increment != size && (get_field(info->sbcs, DM_SBCS_SBVERSION) == 0 || increment != 0)) {
2909 LOG_DEBUG("Skipping mem read via system bus - "
2910 "sba reads only support size==increment or also size==0 for sba v1.");
2911 *skip_reason = "skipped (unsupported increment)";
2918 static bool mem_should_skip_abstract(struct target *target, target_addr_t address,
2919 uint32_t size, uint32_t increment, bool read, char **skip_reason)
2921 assert(skip_reason);
2924 /* TODO: Add 128b support if it's ever used. Involves modifying
2925 read/write_abstract_arg() to work on two 64b values. */
2926 LOG_DEBUG("Skipping mem %s via abstract access - unsupported size: %d bits",
2927 read ? "read" : "write", size * 8);
2928 *skip_reason = "skipped (unsupported size)";
2931 if ((sizeof(address) * 8 > riscv_xlen(target)) && (address >> riscv_xlen(target))) {
2932 LOG_DEBUG("Skipping mem %s via abstract access - abstract access only supports %u-bit address.",
2933 read ? "read" : "write", riscv_xlen(target));
2934 *skip_reason = "skipped (too large address)";
2937 if (read && size != increment) {
2938 LOG_ERROR("Skipping mem read via abstract access - "
2939 "abstract command reads only support size==increment.");
2940 *skip_reason = "skipped (unsupported increment)";
2948 * Performs a memory read using memory access abstract commands. The read sizes
2949 * supported are 1, 2, and 4 bytes despite the spec's support of 8 and 16 byte
2950 * aamsize fields in the memory access abstract command.
2952 static int read_memory_abstract(struct target *target, target_addr_t address,
2953 uint32_t size, uint32_t count, uint8_t *buffer, uint32_t increment)
2955 RISCV013_INFO(info);
2957 int result = ERROR_OK;
2958 bool use_aampostincrement = info->has_aampostincrement != YNM_NO;
2960 LOG_DEBUG("reading %d words of %d bytes from 0x%" TARGET_PRIxADDR, count,
2963 memset(buffer, 0, count * size);
2965 /* Convert the size (bytes) to width (bits) */
2966 unsigned width = size << 3;
2968 /* Create the command (physical address, postincrement, read) */
2969 uint32_t command = access_memory_command(target, false, width, use_aampostincrement, false);
2971 /* Execute the reads */
2972 uint8_t *p = buffer;
2973 bool updateaddr = true;
2974 unsigned int width32 = (width < 32) ? 32 : width;
2975 for (uint32_t c = 0; c < count; c++) {
2976 /* Update the address if it is the first time or aampostincrement is not supported by the target. */
2978 /* Set arg1 to the address: address + c * size */
2979 result = write_abstract_arg(target, 1, address + c * size, riscv_xlen(target));
2980 if (result != ERROR_OK) {
2981 LOG_ERROR("Failed to write arg1 during read_memory_abstract().");
2986 /* Execute the command */
2987 result = execute_abstract_command(target, command);
2989 if (info->has_aampostincrement == YNM_MAYBE) {
2990 if (result == ERROR_OK) {
2991 /* Safety: double-check that the address was really auto-incremented */
2992 riscv_reg_t new_address = read_abstract_arg(target, 1, riscv_xlen(target));
2993 if (new_address == address + size) {
2994 LOG_DEBUG("aampostincrement is supported on this target.");
2995 info->has_aampostincrement = YNM_YES;
2997 LOG_WARNING("Buggy aampostincrement! Address not incremented correctly.");
2998 info->has_aampostincrement = YNM_NO;
3001 /* Try the same access but with postincrement disabled. */
3002 command = access_memory_command(target, false, width, false, false);
3003 result = execute_abstract_command(target, command);
3004 if (result == ERROR_OK) {
3005 LOG_DEBUG("aampostincrement is not supported on this target.");
3006 info->has_aampostincrement = YNM_NO;
3011 if (result != ERROR_OK)
3014 /* Copy arg0 to buffer (rounded width up to nearest 32) */
3015 riscv_reg_t value = read_abstract_arg(target, 0, width32);
3016 buf_set_u64(p, 0, 8 * size, value);
3018 if (info->has_aampostincrement == YNM_YES)
3027 * Performs a memory write using memory access abstract commands. The write
3028 * sizes supported are 1, 2, and 4 bytes despite the spec's support of 8 and 16
3029 * byte aamsize fields in the memory access abstract command.
3031 static int write_memory_abstract(struct target *target, target_addr_t address,
3032 uint32_t size, uint32_t count, const uint8_t *buffer)
3034 RISCV013_INFO(info);
3035 int result = ERROR_OK;
3036 bool use_aampostincrement = info->has_aampostincrement != YNM_NO;
3038 LOG_DEBUG("writing %d words of %d bytes from 0x%" TARGET_PRIxADDR, count,
3041 /* Convert the size (bytes) to width (bits) */
3042 unsigned width = size << 3;
3044 /* Create the command (physical address, postincrement, write) */
3045 uint32_t command = access_memory_command(target, false, width, use_aampostincrement, true);
3047 /* Execute the writes */
3048 const uint8_t *p = buffer;
3049 bool updateaddr = true;
3050 for (uint32_t c = 0; c < count; c++) {
3051 /* Move data to arg0 */
3052 riscv_reg_t value = buf_get_u64(p, 0, 8 * size);
3053 result = write_abstract_arg(target, 0, value, riscv_xlen(target));
3054 if (result != ERROR_OK) {
3055 LOG_ERROR("Failed to write arg0 during write_memory_abstract().");
3059 /* Update the address if it is the first time or aampostincrement is not supported by the target. */
3061 /* Set arg1 to the address: address + c * size */
3062 result = write_abstract_arg(target, 1, address + c * size, riscv_xlen(target));
3063 if (result != ERROR_OK) {
3064 LOG_ERROR("Failed to write arg1 during write_memory_abstract().");
3069 /* Execute the command */
3070 result = execute_abstract_command(target, command);
3072 if (info->has_aampostincrement == YNM_MAYBE) {
3073 if (result == ERROR_OK) {
3074 /* Safety: double-check that the address was really auto-incremented */
3075 riscv_reg_t new_address = read_abstract_arg(target, 1, riscv_xlen(target));
3076 if (new_address == address + size) {
3077 LOG_DEBUG("aampostincrement is supported on this target.");
3078 info->has_aampostincrement = YNM_YES;
3080 LOG_WARNING("Buggy aampostincrement! Address not incremented correctly.");
3081 info->has_aampostincrement = YNM_NO;
3084 /* Try the same access but with postincrement disabled. */
3085 command = access_memory_command(target, false, width, false, true);
3086 result = execute_abstract_command(target, command);
3087 if (result == ERROR_OK) {
3088 LOG_DEBUG("aampostincrement is not supported on this target.");
3089 info->has_aampostincrement = YNM_NO;
3094 if (result != ERROR_OK)
3097 if (info->has_aampostincrement == YNM_YES)
3106 * Read the requested memory, taking care to execute every read exactly once,
3107 * even if cmderr=busy is encountered.
3109 static int read_memory_progbuf_inner(struct target *target, target_addr_t address,
3110 uint32_t size, uint32_t count, uint8_t *buffer, uint32_t increment)
3112 RISCV013_INFO(info);
3114 int result = ERROR_OK;
3116 /* Write address to S0. */
3117 result = register_write_direct(target, GDB_REGNO_S0, address);
3118 if (result != ERROR_OK)
3121 if (increment == 0 &&
3122 register_write_direct(target, GDB_REGNO_S2, 0) != ERROR_OK)
3125 uint32_t command = access_register_command(target, GDB_REGNO_S1,
3127 AC_ACCESS_REGISTER_TRANSFER | AC_ACCESS_REGISTER_POSTEXEC);
3128 if (execute_abstract_command(target, command) != ERROR_OK)
3131 /* First read has just triggered. Result is in s1. */
3134 if (register_read_direct(target, &value, GDB_REGNO_S1) != ERROR_OK)
3136 buf_set_u64(buffer, 0, 8 * size, value);
3137 log_memory_access(address, value, size, true);
3141 if (dmi_write(target, DM_ABSTRACTAUTO,
3142 1 << DM_ABSTRACTAUTO_AUTOEXECDATA_OFFSET) != ERROR_OK)
3144 /* Read garbage from dmi_data0, which triggers another execution of the
3145 * program. Now dmi_data0 contains the first good result, and s1 the next
3147 if (dmi_read_exec(target, NULL, DM_DATA0) != ERROR_OK)
3150 /* read_addr is the next address that the hart will read from, which is the
3153 while (index < count) {
3154 riscv_addr_t read_addr = address + index * increment;
3155 LOG_DEBUG("i=%d, count=%d, read_addr=0x%" PRIx64, index, count, read_addr);
3156 /* The pipeline looks like this:
3157 * memory -> s1 -> dm_data0 -> debugger
3159 * s0 contains read_addr
3160 * s1 contains mem[read_addr-size]
3161 * dm_data0 contains[read_addr-size*2]
3164 struct riscv_batch *batch = riscv_batch_alloc(target, 32,
3165 info->dmi_busy_delay + info->ac_busy_delay);
3170 for (unsigned j = index; j < count; j++) {
3172 riscv_batch_add_dmi_read(batch, DM_DATA1);
3173 riscv_batch_add_dmi_read(batch, DM_DATA0);
3176 if (riscv_batch_full(batch))
3180 batch_run(target, batch);
3182 /* Wait for the target to finish performing the last abstract command,
3183 * and update our copy of cmderr. If we see that DMI is busy here,
3184 * dmi_busy_delay will be incremented. */
3185 uint32_t abstractcs;
3186 if (dmi_read(target, &abstractcs, DM_ABSTRACTCS) != ERROR_OK)
3188 while (get_field(abstractcs, DM_ABSTRACTCS_BUSY))
3189 if (dmi_read(target, &abstractcs, DM_ABSTRACTCS) != ERROR_OK)
3191 info->cmderr = get_field(abstractcs, DM_ABSTRACTCS_CMDERR);
3193 unsigned next_index;
3194 unsigned ignore_last = 0;
3195 switch (info->cmderr) {
3197 LOG_DEBUG("successful (partial?) memory read");
3198 next_index = index + reads;
3201 LOG_DEBUG("memory read resulted in busy response");
3203 increase_ac_busy_delay(target);
3204 riscv013_clear_abstract_error(target);
3206 dmi_write(target, DM_ABSTRACTAUTO, 0);
3208 uint32_t dmi_data0, dmi_data1 = 0;
3209 /* This is definitely a good version of the value that we
3210 * attempted to read when we discovered that the target was
3212 if (dmi_read(target, &dmi_data0, DM_DATA0) != ERROR_OK) {
3213 riscv_batch_free(batch);
3216 if (size > 4 && dmi_read(target, &dmi_data1, DM_DATA1) != ERROR_OK) {
3217 riscv_batch_free(batch);
3221 /* See how far we got, clobbering dmi_data0. */
3222 if (increment == 0) {
3224 result = register_read_direct(target, &counter, GDB_REGNO_S2);
3225 next_index = counter;
3227 uint64_t next_read_addr;
3228 result = register_read_direct(target, &next_read_addr,
3230 next_index = (next_read_addr - address) / increment;
3232 if (result != ERROR_OK) {
3233 riscv_batch_free(batch);
3237 uint64_t value64 = (((uint64_t)dmi_data1) << 32) | dmi_data0;
3238 buf_set_u64(buffer + (next_index - 2) * size, 0, 8 * size, value64);
3239 log_memory_access(address + (next_index - 2) * size, value64, size, true);
3241 /* Restore the command, and execute it.
3242 * Now DM_DATA0 contains the next value just as it would if no
3243 * error had occurred. */
3244 dmi_write_exec(target, DM_COMMAND, command, true);
3247 dmi_write(target, DM_ABSTRACTAUTO,
3248 1 << DM_ABSTRACTAUTO_AUTOEXECDATA_OFFSET);
3254 LOG_DEBUG("error when reading memory, abstractcs=0x%08lx", (long)abstractcs);
3255 riscv013_clear_abstract_error(target);
3256 riscv_batch_free(batch);
3257 result = ERROR_FAIL;
3261 /* Now read whatever we got out of the batch. */
3262 dmi_status_t status = DMI_STATUS_SUCCESS;
3265 for (unsigned j = index - 2; j < index + reads; j++) {
3267 LOG_DEBUG("index=%d, reads=%d, next_index=%d, ignore_last=%d, j=%d",
3268 index, reads, next_index, ignore_last, j);
3269 if (j + 3 + ignore_last > next_index)
3272 status = riscv_batch_get_dmi_read_op(batch, read);
3273 uint64_t value = riscv_batch_get_dmi_read_data(batch, read);
3275 if (status != DMI_STATUS_SUCCESS) {
3276 /* If we're here because of busy count, dmi_busy_delay will
3277 * already have been increased and busy state will have been
3278 * cleared in dmi_read(). */
3279 /* In at least some implementations, we issue a read, and then
3280 * can get busy back when we try to scan out the read result,
3281 * and the actual read value is lost forever. Since this is
3282 * rare in any case, we return error here and rely on our
3283 * caller to reread the entire block. */
3284 LOG_WARNING("Batch memory read encountered DMI error %d. "
3285 "Falling back on slower reads.", status);
3286 riscv_batch_free(batch);
3287 result = ERROR_FAIL;
3291 status = riscv_batch_get_dmi_read_op(batch, read);
3292 if (status != DMI_STATUS_SUCCESS) {
3293 LOG_WARNING("Batch memory read encountered DMI error %d. "
3294 "Falling back on slower reads.", status);
3295 riscv_batch_free(batch);
3296 result = ERROR_FAIL;
3300 value |= riscv_batch_get_dmi_read_data(batch, read);
3303 riscv_addr_t offset = j * size;
3304 buf_set_u64(buffer + offset, 0, 8 * size, value);
3305 log_memory_access(address + j * increment, value, size, true);
3310 riscv_batch_free(batch);
3313 dmi_write(target, DM_ABSTRACTAUTO, 0);
3316 /* Read the penultimate word. */
3317 uint32_t dmi_data0, dmi_data1 = 0;
3318 if (dmi_read(target, &dmi_data0, DM_DATA0) != ERROR_OK)
3320 if (size > 4 && dmi_read(target, &dmi_data1, DM_DATA1) != ERROR_OK)
3322 uint64_t value64 = (((uint64_t)dmi_data1) << 32) | dmi_data0;
3323 buf_set_u64(buffer + size * (count - 2), 0, 8 * size, value64);
3324 log_memory_access(address + size * (count - 2), value64, size, true);
3327 /* Read the last word. */
3329 result = register_read_direct(target, &value, GDB_REGNO_S1);
3330 if (result != ERROR_OK)
3332 buf_set_u64(buffer + size * (count-1), 0, 8 * size, value);
3333 log_memory_access(address + size * (count-1), value, size, true);
3338 dmi_write(target, DM_ABSTRACTAUTO, 0);
3343 /* Only need to save/restore one GPR to read a single word, and the progbuf
3344 * program doesn't need to increment. */
3345 static int read_memory_progbuf_one(struct target *target, target_addr_t address,
3346 uint32_t size, uint8_t *buffer)
3348 uint64_t mstatus = 0;
3349 uint64_t mstatus_old = 0;
3350 if (modify_privilege(target, &mstatus, &mstatus_old) != ERROR_OK)
3354 int result = ERROR_FAIL;
3356 if (register_read(target, &s0, GDB_REGNO_S0) != ERROR_OK)
3357 goto restore_mstatus;
3359 /* Write the program (load, increment) */
3360 struct riscv_program program;
3361 riscv_program_init(&program, target);
3362 if (riscv_enable_virtual && has_sufficient_progbuf(target, 5) && get_field(mstatus, MSTATUS_MPRV))
3363 riscv_program_csrrsi(&program, GDB_REGNO_ZERO, CSR_DCSR_MPRVEN, GDB_REGNO_DCSR);
3366 riscv_program_lbr(&program, GDB_REGNO_S0, GDB_REGNO_S0, 0);
3369 riscv_program_lhr(&program, GDB_REGNO_S0, GDB_REGNO_S0, 0);
3372 riscv_program_lwr(&program, GDB_REGNO_S0, GDB_REGNO_S0, 0);
3375 riscv_program_ldr(&program, GDB_REGNO_S0, GDB_REGNO_S0, 0);
3378 LOG_ERROR("Unsupported size: %d", size);
3379 goto restore_mstatus;
3381 if (riscv_enable_virtual && has_sufficient_progbuf(target, 5) && get_field(mstatus, MSTATUS_MPRV))
3382 riscv_program_csrrci(&program, GDB_REGNO_ZERO, CSR_DCSR_MPRVEN, GDB_REGNO_DCSR);
3384 if (riscv_program_ebreak(&program) != ERROR_OK)
3385 goto restore_mstatus;
3386 if (riscv_program_write(&program) != ERROR_OK)
3387 goto restore_mstatus;
3389 /* Write address to S0, and execute buffer. */
3390 if (write_abstract_arg(target, 0, address, riscv_xlen(target)) != ERROR_OK)
3391 goto restore_mstatus;
3392 uint32_t command = access_register_command(target, GDB_REGNO_S0,
3393 riscv_xlen(target), AC_ACCESS_REGISTER_WRITE |
3394 AC_ACCESS_REGISTER_TRANSFER | AC_ACCESS_REGISTER_POSTEXEC);
3395 if (execute_abstract_command(target, command) != ERROR_OK)
3399 if (register_read(target, &value, GDB_REGNO_S0) != ERROR_OK)
3401 buf_set_u64(buffer, 0, 8 * size, value);
3402 log_memory_access(address, value, size, true);
3406 if (riscv_set_register(target, GDB_REGNO_S0, s0) != ERROR_OK)
3407 result = ERROR_FAIL;
3410 if (mstatus != mstatus_old)
3411 if (register_write_direct(target, GDB_REGNO_MSTATUS, mstatus_old))
3412 result = ERROR_FAIL;
3418 * Read the requested memory, silently handling memory access errors.
3420 static int read_memory_progbuf(struct target *target, target_addr_t address,
3421 uint32_t size, uint32_t count, uint8_t *buffer, uint32_t increment)
3423 if (riscv_xlen(target) < size * 8) {
3424 LOG_ERROR("XLEN (%d) is too short for %d-bit memory read.",
3425 riscv_xlen(target), size * 8);
3429 int result = ERROR_OK;
3431 LOG_DEBUG("reading %d words of %d bytes from 0x%" TARGET_PRIxADDR, count,
3436 memset(buffer, 0, count*size);
3438 if (execute_fence(target) != ERROR_OK)
3442 return read_memory_progbuf_one(target, address, size, buffer);
3444 uint64_t mstatus = 0;
3445 uint64_t mstatus_old = 0;
3446 if (modify_privilege(target, &mstatus, &mstatus_old) != ERROR_OK)
3449 /* s0 holds the next address to read from
3450 * s1 holds the next data value read
3451 * s2 is a counter in case increment is 0
3453 uint64_t s0, s1, s2;
3454 if (register_read(target, &s0, GDB_REGNO_S0) != ERROR_OK)
3456 if (register_read(target, &s1, GDB_REGNO_S1) != ERROR_OK)
3458 if (increment == 0 && register_read(target, &s2, GDB_REGNO_S2) != ERROR_OK)
3461 /* Write the program (load, increment) */
3462 struct riscv_program program;
3463 riscv_program_init(&program, target);
3464 if (riscv_enable_virtual && has_sufficient_progbuf(target, 5) && get_field(mstatus, MSTATUS_MPRV))
3465 riscv_program_csrrsi(&program, GDB_REGNO_ZERO, CSR_DCSR_MPRVEN, GDB_REGNO_DCSR);
3469 riscv_program_lbr(&program, GDB_REGNO_S1, GDB_REGNO_S0, 0);
3472 riscv_program_lhr(&program, GDB_REGNO_S1, GDB_REGNO_S0, 0);
3475 riscv_program_lwr(&program, GDB_REGNO_S1, GDB_REGNO_S0, 0);
3478 riscv_program_ldr(&program, GDB_REGNO_S1, GDB_REGNO_S0, 0);
3481 LOG_ERROR("Unsupported size: %d", size);
3485 if (riscv_enable_virtual && has_sufficient_progbuf(target, 5) && get_field(mstatus, MSTATUS_MPRV))
3486 riscv_program_csrrci(&program, GDB_REGNO_ZERO, CSR_DCSR_MPRVEN, GDB_REGNO_DCSR);
3488 riscv_program_addi(&program, GDB_REGNO_S2, GDB_REGNO_S2, 1);
3490 riscv_program_addi(&program, GDB_REGNO_S0, GDB_REGNO_S0, increment);
3492 if (riscv_program_ebreak(&program) != ERROR_OK)
3494 if (riscv_program_write(&program) != ERROR_OK)
3497 result = read_memory_progbuf_inner(target, address, size, count, buffer, increment);
3499 if (result != ERROR_OK) {
3500 /* The full read did not succeed, so we will try to read each word individually. */
3501 /* This will not be fast, but reading outside actual memory is a special case anyway. */
3502 /* It will make the toolchain happier, especially Eclipse Memory View as it reads ahead. */
3503 target_addr_t address_i = address;
3504 uint32_t count_i = 1;
3505 uint8_t *buffer_i = buffer;
3507 for (uint32_t i = 0; i < count; i++, address_i += increment, buffer_i += size) {
3508 /* TODO: This is much slower than it needs to be because we end up
3509 * writing the address to read for every word we read. */
3510 result = read_memory_progbuf_inner(target, address_i, size, count_i, buffer_i, increment);
3512 /* The read of a single word failed, so we will just return 0 for that instead */
3513 if (result != ERROR_OK) {
3514 LOG_DEBUG("error reading single word of %d bytes from 0x%" TARGET_PRIxADDR,
3517 buf_set_u64(buffer_i, 0, 8 * size, 0);
3523 riscv_set_register(target, GDB_REGNO_S0, s0);
3524 riscv_set_register(target, GDB_REGNO_S1, s1);
3526 riscv_set_register(target, GDB_REGNO_S2, s2);
3528 /* Restore MSTATUS */
3529 if (mstatus != mstatus_old)
3530 if (register_write_direct(target, GDB_REGNO_MSTATUS, mstatus_old))
3536 static int read_memory(struct target *target, target_addr_t address,
3537 uint32_t size, uint32_t count, uint8_t *buffer, uint32_t increment)
3542 if (size != 1 && size != 2 && size != 4 && size != 8 && size != 16) {
3543 LOG_ERROR("BUG: Unsupported size for memory read: %d", size);
3547 int ret = ERROR_FAIL;
3549 RISCV013_INFO(info);
3551 char *progbuf_result = "disabled";
3552 char *sysbus_result = "disabled";
3553 char *abstract_result = "disabled";
3555 for (unsigned int i = 0; i < RISCV_NUM_MEM_ACCESS_METHODS; i++) {
3556 int method = r->mem_access_methods[i];
3558 if (method == RISCV_MEM_ACCESS_PROGBUF) {
3559 if (mem_should_skip_progbuf(target, address, size, true, &progbuf_result))
3562 ret = read_memory_progbuf(target, address, size, count, buffer, increment);
3564 if (ret != ERROR_OK)
3565 progbuf_result = "failed";
3566 } else if (method == RISCV_MEM_ACCESS_SYSBUS) {
3567 if (mem_should_skip_sysbus(target, address, size, increment, true, &sysbus_result))
3570 if (get_field(info->sbcs, DM_SBCS_SBVERSION) == 0)
3571 ret = read_memory_bus_v0(target, address, size, count, buffer, increment);
3572 else if (get_field(info->sbcs, DM_SBCS_SBVERSION) == 1)
3573 ret = read_memory_bus_v1(target, address, size, count, buffer, increment);
3575 if (ret != ERROR_OK)
3576 sysbus_result = "failed";
3577 } else if (method == RISCV_MEM_ACCESS_ABSTRACT) {
3578 if (mem_should_skip_abstract(target, address, size, increment, true, &abstract_result))
3581 ret = read_memory_abstract(target, address, size, count, buffer, increment);
3583 if (ret != ERROR_OK)
3584 abstract_result = "failed";
3585 } else if (method == RISCV_MEM_ACCESS_UNSPECIFIED)
3586 /* No further mem access method to try. */
3589 log_mem_access_result(target, ret == ERROR_OK, method, true);
3591 if (ret == ERROR_OK)
3595 LOG_ERROR("Target %s: Failed to read memory (addr=0x%" PRIx64 ")", target_name(target), address);
3596 LOG_ERROR(" progbuf=%s, sysbus=%s, abstract=%s", progbuf_result, sysbus_result, abstract_result);
3600 static int write_memory_bus_v0(struct target *target, target_addr_t address,
3601 uint32_t size, uint32_t count, const uint8_t *buffer)
3603 /*1) write sbaddress: for singlewrite and autoincrement, we need to write the address once*/
3604 LOG_DEBUG("System Bus Access: size: %d\tcount:%d\tstart address: 0x%08"
3605 TARGET_PRIxADDR, size, count, address);
3606 dmi_write(target, DM_SBADDRESS0, address);
3609 riscv_addr_t offset = 0;
3610 riscv_addr_t t_addr = 0;
3611 const uint8_t *t_buffer = buffer + offset;
3613 /* B.8 Writing Memory, single write check if we write in one go */
3614 if (count == 1) { /* count is in bytes here */
3615 value = buf_get_u64(t_buffer, 0, 8 * size);
3618 access = set_field(access, DM_SBCS_SBACCESS, size/2);
3619 dmi_write(target, DM_SBCS, access);
3620 LOG_DEBUG("\r\naccess: 0x%08" PRIx64, access);
3621 LOG_DEBUG("\r\nwrite_memory:SAB: ONE OFF: value 0x%08" PRIx64, value);
3622 dmi_write(target, DM_SBDATA0, value);
3626 /*B.8 Writing Memory, using autoincrement*/
3629 access = set_field(access, DM_SBCS_SBACCESS, size/2);
3630 access = set_field(access, DM_SBCS_SBAUTOINCREMENT, 1);
3631 LOG_DEBUG("\r\naccess: 0x%08" PRIx64, access);
3632 dmi_write(target, DM_SBCS, access);
3634 /*2)set the value according to the size required and write*/
3635 for (riscv_addr_t i = 0; i < count; ++i) {
3637 /* for monitoring only */
3638 t_addr = address + offset;
3639 t_buffer = buffer + offset;
3641 value = buf_get_u64(t_buffer, 0, 8 * size);
3642 LOG_DEBUG("SAB:autoincrement: expected address: 0x%08x value: 0x%08x"
3643 PRIx64, (uint32_t)t_addr, (uint32_t)value);
3644 dmi_write(target, DM_SBDATA0, value);
3646 /*reset the autoincrement when finished (something weird is happening if this is not done at the end*/
3647 access = set_field(access, DM_SBCS_SBAUTOINCREMENT, 0);
3648 dmi_write(target, DM_SBCS, access);
3653 static int write_memory_bus_v1(struct target *target, target_addr_t address,
3654 uint32_t size, uint32_t count, const uint8_t *buffer)
3656 RISCV013_INFO(info);
3657 uint32_t sbcs = sb_sbaccess(size);
3658 sbcs = set_field(sbcs, DM_SBCS_SBAUTOINCREMENT, 1);
3659 dmi_write(target, DM_SBCS, sbcs);
3661 target_addr_t next_address = address;
3662 target_addr_t end_address = address + count * size;
3666 sb_write_address(target, next_address, true);
3667 while (next_address < end_address) {
3668 LOG_DEBUG("transferring burst starting at address 0x%" TARGET_PRIxADDR,
3671 struct riscv_batch *batch = riscv_batch_alloc(
3674 info->dmi_busy_delay + info->bus_master_write_delay);
3678 for (uint32_t i = (next_address - address) / size; i < count; i++) {
3679 const uint8_t *p = buffer + i * size;
3681 if (riscv_batch_available_scans(batch) < (size + 3) / 4)
3685 riscv_batch_add_dmi_write(batch, DM_SBDATA3,
3686 ((uint32_t) p[12]) |
3687 (((uint32_t) p[13]) << 8) |
3688 (((uint32_t) p[14]) << 16) |
3689 (((uint32_t) p[15]) << 24));
3692 riscv_batch_add_dmi_write(batch, DM_SBDATA2,
3694 (((uint32_t) p[9]) << 8) |
3695 (((uint32_t) p[10]) << 16) |
3696 (((uint32_t) p[11]) << 24));
3698 riscv_batch_add_dmi_write(batch, DM_SBDATA1,
3700 (((uint32_t) p[5]) << 8) |
3701 (((uint32_t) p[6]) << 16) |
3702 (((uint32_t) p[7]) << 24));
3703 uint32_t value = p[0];
3705 value |= ((uint32_t) p[2]) << 16;
3706 value |= ((uint32_t) p[3]) << 24;
3709 value |= ((uint32_t) p[1]) << 8;
3710 riscv_batch_add_dmi_write(batch, DM_SBDATA0, value);
3712 log_memory_access(address + i * size, value, size, false);
3713 next_address += size;
3716 /* Execute the batch of writes */
3717 result = batch_run(target, batch);
3718 riscv_batch_free(batch);
3719 if (result != ERROR_OK)
3723 * At the same time, detect if DMI busy has occurred during the batch write. */
3724 bool dmi_busy_encountered;
3725 if (dmi_op(target, &sbcs, &dmi_busy_encountered, DMI_OP_READ,
3726 DM_SBCS, 0, false, true) != ERROR_OK)
3728 if (dmi_busy_encountered)
3729 LOG_DEBUG("DMI busy encountered during system bus write.");
3731 /* Wait until sbbusy goes low */
3732 time_t start = time(NULL);
3733 while (get_field(sbcs, DM_SBCS_SBBUSY)) {
3734 if (time(NULL) - start > riscv_command_timeout_sec) {
3735 LOG_ERROR("Timed out after %ds waiting for sbbusy to go low (sbcs=0x%x). "
3736 "Increase the timeout with riscv set_command_timeout_sec.",
3737 riscv_command_timeout_sec, sbcs);
3740 if (dmi_read(target, &sbcs, DM_SBCS) != ERROR_OK)
3744 if (get_field(sbcs, DM_SBCS_SBBUSYERROR)) {
3745 /* We wrote while the target was busy. */
3746 LOG_DEBUG("Sbbusyerror encountered during system bus write.");
3747 /* Clear the sticky error flag. */
3748 dmi_write(target, DM_SBCS, sbcs | DM_SBCS_SBBUSYERROR);
3749 /* Slow down before trying again. */
3750 info->bus_master_write_delay += info->bus_master_write_delay / 10 + 1;
3753 if (get_field(sbcs, DM_SBCS_SBBUSYERROR) || dmi_busy_encountered) {
3754 /* Recover from the case when the write commands were issued too fast.
3755 * Determine the address from which to resume writing. */
3756 next_address = sb_read_address(target);
3757 if (next_address < address) {
3758 /* This should never happen, probably buggy hardware. */
3759 LOG_DEBUG("unexpected sbaddress=0x%" TARGET_PRIxADDR
3760 " - buggy sbautoincrement in hw?", next_address);
3761 /* Fail the whole operation. */
3764 /* Try again - resume writing. */
3768 unsigned int sberror = get_field(sbcs, DM_SBCS_SBERROR);
3770 /* Sberror indicates the bus access failed, but not because we issued the writes
3771 * too fast. Cannot recover. Sbaddress holds the address where the error occurred
3772 * (unless sbautoincrement in the HW is buggy).
3774 target_addr_t sbaddress = sb_read_address(target);
3775 LOG_DEBUG("System bus access failed with sberror=%u (sbaddress=0x%" TARGET_PRIxADDR ")",
3776 sberror, sbaddress);
3777 if (sbaddress < address) {
3778 /* This should never happen, probably buggy hardware.
3779 * Make a note to the user not to trust the sbaddress value. */
3780 LOG_DEBUG("unexpected sbaddress=0x%" TARGET_PRIxADDR
3781 " - buggy sbautoincrement in hw?", next_address);
3783 /* Clear the sticky error flag */
3784 dmi_write(target, DM_SBCS, DM_SBCS_SBERROR);
3785 /* Fail the whole operation */
3793 static int write_memory_progbuf(struct target *target, target_addr_t address,
3794 uint32_t size, uint32_t count, const uint8_t *buffer)
3796 RISCV013_INFO(info);
3798 if (riscv_xlen(target) < size * 8) {
3799 LOG_ERROR("XLEN (%d) is too short for %d-bit memory write.",
3800 riscv_xlen(target), size * 8);
3804 LOG_DEBUG("writing %d words of %d bytes to 0x%08lx", count, size, (long)address);
3808 uint64_t mstatus = 0;
3809 uint64_t mstatus_old = 0;
3810 if (modify_privilege(target, &mstatus, &mstatus_old) != ERROR_OK)
3813 /* s0 holds the next address to write to
3814 * s1 holds the next data value to write
3817 int result = ERROR_OK;
3819 if (register_read(target, &s0, GDB_REGNO_S0) != ERROR_OK)
3821 if (register_read(target, &s1, GDB_REGNO_S1) != ERROR_OK)
3824 /* Write the program (store, increment) */
3825 struct riscv_program program;
3826 riscv_program_init(&program, target);
3827 if (riscv_enable_virtual && has_sufficient_progbuf(target, 5) && get_field(mstatus, MSTATUS_MPRV))
3828 riscv_program_csrrsi(&program, GDB_REGNO_ZERO, CSR_DCSR_MPRVEN, GDB_REGNO_DCSR);
3832 riscv_program_sbr(&program, GDB_REGNO_S1, GDB_REGNO_S0, 0);
3835 riscv_program_shr(&program, GDB_REGNO_S1, GDB_REGNO_S0, 0);
3838 riscv_program_swr(&program, GDB_REGNO_S1, GDB_REGNO_S0, 0);
3841 riscv_program_sdr(&program, GDB_REGNO_S1, GDB_REGNO_S0, 0);
3844 LOG_ERROR("write_memory_progbuf(): Unsupported size: %d", size);
3845 result = ERROR_FAIL;
3849 if (riscv_enable_virtual && has_sufficient_progbuf(target, 5) && get_field(mstatus, MSTATUS_MPRV))
3850 riscv_program_csrrci(&program, GDB_REGNO_ZERO, CSR_DCSR_MPRVEN, GDB_REGNO_DCSR);
3851 riscv_program_addi(&program, GDB_REGNO_S0, GDB_REGNO_S0, size);
3853 result = riscv_program_ebreak(&program);
3854 if (result != ERROR_OK)
3856 riscv_program_write(&program);
3858 riscv_addr_t cur_addr = address;
3859 riscv_addr_t fin_addr = address + (count * size);
3860 bool setup_needed = true;
3861 LOG_DEBUG("writing until final address 0x%016" PRIx64, fin_addr);
3862 while (cur_addr < fin_addr) {
3863 LOG_DEBUG("transferring burst starting at address 0x%016" PRIx64,
3866 struct riscv_batch *batch = riscv_batch_alloc(
3869 info->dmi_busy_delay + info->ac_busy_delay);
3873 /* To write another word, we put it in S1 and execute the program. */
3874 unsigned start = (cur_addr - address) / size;
3875 for (unsigned i = start; i < count; ++i) {
3876 unsigned offset = size*i;
3877 const uint8_t *t_buffer = buffer + offset;
3879 uint64_t value = buf_get_u64(t_buffer, 0, 8 * size);
3881 log_memory_access(address + offset, value, size, false);
3885 result = register_write_direct(target, GDB_REGNO_S0,
3887 if (result != ERROR_OK) {
3888 riscv_batch_free(batch);
3894 dmi_write(target, DM_DATA1, value >> 32);
3895 dmi_write(target, DM_DATA0, value);
3897 /* Write and execute command that moves value into S1 and
3898 * executes program buffer. */
3899 uint32_t command = access_register_command(target,
3900 GDB_REGNO_S1, riscv_xlen(target),
3901 AC_ACCESS_REGISTER_POSTEXEC |
3902 AC_ACCESS_REGISTER_TRANSFER |
3903 AC_ACCESS_REGISTER_WRITE);
3904 result = execute_abstract_command(target, command);
3905 if (result != ERROR_OK) {
3906 riscv_batch_free(batch);
3910 /* Turn on autoexec */
3911 dmi_write(target, DM_ABSTRACTAUTO,
3912 1 << DM_ABSTRACTAUTO_AUTOEXECDATA_OFFSET);
3914 setup_needed = false;
3917 riscv_batch_add_dmi_write(batch, DM_DATA1, value >> 32);
3918 riscv_batch_add_dmi_write(batch, DM_DATA0, value);
3919 if (riscv_batch_full(batch))
3924 result = batch_run(target, batch);
3925 riscv_batch_free(batch);
3926 if (result != ERROR_OK)
3929 /* Note that if the scan resulted in a Busy DMI response, it
3930 * is this read to abstractcs that will cause the dmi_busy_delay
3931 * to be incremented if necessary. */
3933 uint32_t abstractcs;
3934 bool dmi_busy_encountered;
3935 result = dmi_op(target, &abstractcs, &dmi_busy_encountered,
3936 DMI_OP_READ, DM_ABSTRACTCS, 0, false, true);
3937 if (result != ERROR_OK)
3939 while (get_field(abstractcs, DM_ABSTRACTCS_BUSY))
3940 if (dmi_read(target, &abstractcs, DM_ABSTRACTCS) != ERROR_OK)
3942 info->cmderr = get_field(abstractcs, DM_ABSTRACTCS_CMDERR);
3943 if (info->cmderr == CMDERR_NONE && !dmi_busy_encountered) {
3944 LOG_DEBUG("successful (partial?) memory write");
3945 } else if (info->cmderr == CMDERR_BUSY || dmi_busy_encountered) {
3946 if (info->cmderr == CMDERR_BUSY)
3947 LOG_DEBUG("Memory write resulted in abstract command busy response.");
3948 else if (dmi_busy_encountered)
3949 LOG_DEBUG("Memory write resulted in DMI busy response.");
3950 riscv013_clear_abstract_error(target);
3951 increase_ac_busy_delay(target);
3953 dmi_write(target, DM_ABSTRACTAUTO, 0);
3954 result = register_read_direct(target, &cur_addr, GDB_REGNO_S0);
3955 if (result != ERROR_OK)
3957 setup_needed = true;
3959 LOG_ERROR("error when writing memory, abstractcs=0x%08lx", (long)abstractcs);
3960 riscv013_clear_abstract_error(target);
3961 result = ERROR_FAIL;
3967 dmi_write(target, DM_ABSTRACTAUTO, 0);
3969 if (register_write_direct(target, GDB_REGNO_S1, s1) != ERROR_OK)
3971 if (register_write_direct(target, GDB_REGNO_S0, s0) != ERROR_OK)
3974 /* Restore MSTATUS */
3975 if (mstatus != mstatus_old)
3976 if (register_write_direct(target, GDB_REGNO_MSTATUS, mstatus_old))
3979 if (execute_fence(target) != ERROR_OK)
3985 static int write_memory(struct target *target, target_addr_t address,
3986 uint32_t size, uint32_t count, const uint8_t *buffer)
3988 if (size != 1 && size != 2 && size != 4 && size != 8 && size != 16) {
3989 LOG_ERROR("BUG: Unsupported size for memory write: %d", size);
3993 int ret = ERROR_FAIL;
3995 RISCV013_INFO(info);
3997 char *progbuf_result = "disabled";
3998 char *sysbus_result = "disabled";
3999 char *abstract_result = "disabled";
4001 for (unsigned int i = 0; i < RISCV_NUM_MEM_ACCESS_METHODS; i++) {
4002 int method = r->mem_access_methods[i];
4004 if (method == RISCV_MEM_ACCESS_PROGBUF) {
4005 if (mem_should_skip_progbuf(target, address, size, false, &progbuf_result))
4008 ret = write_memory_progbuf(target, address, size, count, buffer);
4010 if (ret != ERROR_OK)
4011 progbuf_result = "failed";
4012 } else if (method == RISCV_MEM_ACCESS_SYSBUS) {
4013 if (mem_should_skip_sysbus(target, address, size, 0, false, &sysbus_result))
4016 if (get_field(info->sbcs, DM_SBCS_SBVERSION) == 0)
4017 ret = write_memory_bus_v0(target, address, size, count, buffer);
4018 else if (get_field(info->sbcs, DM_SBCS_SBVERSION) == 1)
4019 ret = write_memory_bus_v1(target, address, size, count, buffer);
4021 if (ret != ERROR_OK)
4022 sysbus_result = "failed";
4023 } else if (method == RISCV_MEM_ACCESS_ABSTRACT) {
4024 if (mem_should_skip_abstract(target, address, size, 0, false, &abstract_result))
4027 ret = write_memory_abstract(target, address, size, count, buffer);
4029 if (ret != ERROR_OK)
4030 abstract_result = "failed";
4031 } else if (method == RISCV_MEM_ACCESS_UNSPECIFIED)
4032 /* No further mem access method to try. */
4035 log_mem_access_result(target, ret == ERROR_OK, method, false);
4037 if (ret == ERROR_OK)
4041 LOG_ERROR("Target %s: Failed to write memory (addr=0x%" PRIx64 ")", target_name(target), address);
4042 LOG_ERROR(" progbuf=%s, sysbus=%s, abstract=%s", progbuf_result, sysbus_result, abstract_result);
4046 static int arch_state(struct target *target)
4051 struct target_type riscv013_target = {
4054 .init_target = init_target,
4055 .deinit_target = deinit_target,
4058 .poll = &riscv_openocd_poll,
4059 .halt = &riscv_halt,
4060 .step = &riscv_openocd_step,
4062 .assert_reset = assert_reset,
4063 .deassert_reset = deassert_reset,
4065 .write_memory = write_memory,
4067 .arch_state = arch_state
4070 /*** 0.13-specific implementations of various RISC-V helper functions. ***/
4071 static int riscv013_get_register(struct target *target,
4072 riscv_reg_t *value, int rid)
4074 LOG_DEBUG("[%s] reading register %s", target_name(target),
4075 gdb_regno_name(rid));
4077 if (riscv_select_current_hart(target) != ERROR_OK)
4080 int result = ERROR_OK;
4081 if (rid == GDB_REGNO_PC) {
4082 /* TODO: move this into riscv.c. */
4083 result = register_read(target, value, GDB_REGNO_DPC);
4084 LOG_DEBUG("[%d] read PC from DPC: 0x%" PRIx64, target->coreid, *value);
4085 } else if (rid == GDB_REGNO_PRIV) {
4087 /* TODO: move this into riscv.c. */
4088 result = register_read(target, &dcsr, GDB_REGNO_DCSR);
4089 *value = set_field(0, VIRT_PRIV_V, get_field(dcsr, CSR_DCSR_V));
4090 *value = set_field(*value, VIRT_PRIV_PRV, get_field(dcsr, CSR_DCSR_PRV));
4092 result = register_read(target, value, rid);
4093 if (result != ERROR_OK)
4100 static int riscv013_set_register(struct target *target, int rid, uint64_t value)
4102 riscv013_select_current_hart(target);
4103 LOG_DEBUG("[%d] writing 0x%" PRIx64 " to register %s",
4104 target->coreid, value, gdb_regno_name(rid));
4106 if (rid <= GDB_REGNO_XPR31) {
4107 return register_write_direct(target, rid, value);
4108 } else if (rid == GDB_REGNO_PC) {
4109 LOG_DEBUG("[%d] writing PC to DPC: 0x%" PRIx64, target->coreid, value);
4110 register_write_direct(target, GDB_REGNO_DPC, value);
4111 uint64_t actual_value;
4112 register_read_direct(target, &actual_value, GDB_REGNO_DPC);
4113 LOG_DEBUG("[%d] actual DPC written: 0x%016" PRIx64, target->coreid, actual_value);
4114 if (value != actual_value) {
4115 LOG_ERROR("Written PC (0x%" PRIx64 ") does not match read back "
4116 "value (0x%" PRIx64 ")", value, actual_value);
4119 } else if (rid == GDB_REGNO_PRIV) {
4121 register_read(target, &dcsr, GDB_REGNO_DCSR);
4122 dcsr = set_field(dcsr, CSR_DCSR_PRV, get_field(value, VIRT_PRIV_PRV));
4123 dcsr = set_field(dcsr, CSR_DCSR_V, get_field(value, VIRT_PRIV_V));
4124 return register_write_direct(target, GDB_REGNO_DCSR, dcsr);
4126 return register_write_direct(target, rid, value);
4132 static int riscv013_select_current_hart(struct target *target)
4136 dm013_info_t *dm = get_dm(target);
4139 if (r->current_hartid == dm->current_hartid)
4143 /* TODO: can't we just "dmcontrol = DMI_DMACTIVE"? */
4144 if (dmi_read(target, &dmcontrol, DM_DMCONTROL) != ERROR_OK)
4146 dmcontrol = set_hartsel(dmcontrol, r->current_hartid);
4147 int result = dmi_write(target, DM_DMCONTROL, dmcontrol);
4148 dm->current_hartid = r->current_hartid;
4152 /* Select all harts that were prepped and that are selectable, clearing the
4153 * prepped flag on the harts that actually were selected. */
4154 static int select_prepped_harts(struct target *target, bool *use_hasel)
4156 dm013_info_t *dm = get_dm(target);
4159 if (!dm->hasel_supported) {
4166 assert(dm->hart_count);
4167 unsigned hawindow_count = (dm->hart_count + 31) / 32;
4168 uint32_t hawindow[hawindow_count];
4170 memset(hawindow, 0, sizeof(uint32_t) * hawindow_count);
4172 target_list_t *entry;
4173 unsigned total_selected = 0;
4174 list_for_each_entry(entry, &dm->target_list, list) {
4175 struct target *t = entry->target;
4176 riscv_info_t *r = riscv_info(t);
4177 riscv013_info_t *info = get_info(t);
4178 unsigned index = info->index;
4179 LOG_DEBUG("index=%d, coreid=%d, prepped=%d", index, t->coreid, r->prepped);
4180 r->selected = r->prepped;
4182 hawindow[index / 32] |= 1 << (index % 32);
4189 /* Don't use hasel if we only need to talk to one hart. */
4190 if (total_selected <= 1) {
4195 for (unsigned i = 0; i < hawindow_count; i++) {
4196 if (dmi_write(target, DM_HAWINDOWSEL, i) != ERROR_OK)
4198 if (dmi_write(target, DM_HAWINDOW, hawindow[i]) != ERROR_OK)
4206 static int riscv013_halt_prep(struct target *target)
4211 static int riscv013_halt_go(struct target *target)
4213 bool use_hasel = false;
4214 if (select_prepped_harts(target, &use_hasel) != ERROR_OK)
4218 LOG_DEBUG("halting hart %d", r->current_hartid);
4220 /* Issue the halt command, and then wait for the current hart to halt. */
4221 uint32_t dmcontrol = DM_DMCONTROL_DMACTIVE | DM_DMCONTROL_HALTREQ;
4223 dmcontrol |= DM_DMCONTROL_HASEL;
4224 dmcontrol = set_hartsel(dmcontrol, r->current_hartid);
4225 dmi_write(target, DM_DMCONTROL, dmcontrol);
4226 for (size_t i = 0; i < 256; ++i)
4227 if (riscv_is_halted(target))
4230 if (!riscv_is_halted(target)) {
4232 if (dmstatus_read(target, &dmstatus, true) != ERROR_OK)
4234 if (dmi_read(target, &dmcontrol, DM_DMCONTROL) != ERROR_OK)
4237 LOG_ERROR("unable to halt hart %d", r->current_hartid);
4238 LOG_ERROR(" dmcontrol=0x%08x", dmcontrol);
4239 LOG_ERROR(" dmstatus =0x%08x", dmstatus);
4243 dmcontrol = set_field(dmcontrol, DM_DMCONTROL_HALTREQ, 0);
4244 dmi_write(target, DM_DMCONTROL, dmcontrol);
4247 target_list_t *entry;
4248 dm013_info_t *dm = get_dm(target);
4251 list_for_each_entry(entry, &dm->target_list, list) {
4252 struct target *t = entry->target;
4253 t->state = TARGET_HALTED;
4254 if (t->debug_reason == DBG_REASON_NOTHALTED)
4255 t->debug_reason = DBG_REASON_DBGRQ;
4258 /* The "else" case is handled in halt_go(). */
4263 static int riscv013_resume_go(struct target *target)
4265 bool use_hasel = false;
4266 if (select_prepped_harts(target, &use_hasel) != ERROR_OK)
4269 return riscv013_step_or_resume_current_hart(target, false, use_hasel);
4272 static int riscv013_step_current_hart(struct target *target)
4274 return riscv013_step_or_resume_current_hart(target, true, false);
4277 static int riscv013_resume_prep(struct target *target)
4279 return riscv013_on_step_or_resume(target, false);
4282 static int riscv013_on_step(struct target *target)
4284 return riscv013_on_step_or_resume(target, true);
4287 static int riscv013_on_halt(struct target *target)
4292 static bool riscv013_is_halted(struct target *target)
4295 if (dmstatus_read(target, &dmstatus, true) != ERROR_OK)
4297 if (get_field(dmstatus, DM_DMSTATUS_ANYUNAVAIL))
4298 LOG_ERROR("Hart %d is unavailable.", riscv_current_hartid(target));
4299 if (get_field(dmstatus, DM_DMSTATUS_ANYNONEXISTENT))
4300 LOG_ERROR("Hart %d doesn't exist.", riscv_current_hartid(target));
4301 if (get_field(dmstatus, DM_DMSTATUS_ANYHAVERESET)) {
4302 int hartid = riscv_current_hartid(target);
4303 LOG_INFO("Hart %d unexpectedly reset!", hartid);
4304 /* TODO: Can we make this more obvious to eg. a gdb user? */
4305 uint32_t dmcontrol = DM_DMCONTROL_DMACTIVE |
4306 DM_DMCONTROL_ACKHAVERESET;
4307 dmcontrol = set_hartsel(dmcontrol, hartid);
4308 /* If we had been halted when we reset, request another halt. If we
4309 * ended up running out of reset, then the user will (hopefully) get a
4310 * message that a reset happened, that the target is running, and then
4311 * that it is halted again once the request goes through.
4313 if (target->state == TARGET_HALTED)
4314 dmcontrol |= DM_DMCONTROL_HALTREQ;
4315 dmi_write(target, DM_DMCONTROL, dmcontrol);
4317 return get_field(dmstatus, DM_DMSTATUS_ALLHALTED);
4320 static enum riscv_halt_reason riscv013_halt_reason(struct target *target)
4323 int result = register_read(target, &dcsr, GDB_REGNO_DCSR);
4324 if (result != ERROR_OK)
4325 return RISCV_HALT_UNKNOWN;
4327 LOG_DEBUG("dcsr.cause: 0x%" PRIx64, get_field(dcsr, CSR_DCSR_CAUSE));
4329 switch (get_field(dcsr, CSR_DCSR_CAUSE)) {
4330 case CSR_DCSR_CAUSE_SWBP:
4331 return RISCV_HALT_BREAKPOINT;
4332 case CSR_DCSR_CAUSE_TRIGGER:
4333 /* We could get here before triggers are enumerated if a trigger was
4334 * already set when we connected. Force enumeration now, which has the
4335 * side effect of clearing any triggers we did not set. */
4336 riscv_enumerate_triggers(target);
4337 LOG_DEBUG("{%d} halted because of trigger", target->coreid);
4338 return RISCV_HALT_TRIGGER;
4339 case CSR_DCSR_CAUSE_STEP:
4340 return RISCV_HALT_SINGLESTEP;
4341 case CSR_DCSR_CAUSE_DEBUGINT:
4342 case CSR_DCSR_CAUSE_HALT:
4343 return RISCV_HALT_INTERRUPT;
4344 case CSR_DCSR_CAUSE_GROUP:
4345 return RISCV_HALT_GROUP;
4348 LOG_ERROR("Unknown DCSR cause field: 0x%" PRIx64, get_field(dcsr, CSR_DCSR_CAUSE));
4349 LOG_ERROR(" dcsr=0x%016lx", (long)dcsr);
4350 return RISCV_HALT_UNKNOWN;
4353 int riscv013_write_debug_buffer(struct target *target, unsigned index, riscv_insn_t data)
4355 dm013_info_t *dm = get_dm(target);
4358 if (dm->progbuf_cache[index] != data) {
4359 if (dmi_write(target, DM_PROGBUF0 + index, data) != ERROR_OK)
4361 dm->progbuf_cache[index] = data;
4363 LOG_DEBUG("cache hit for 0x%" PRIx32 " @%d", data, index);
4368 riscv_insn_t riscv013_read_debug_buffer(struct target *target, unsigned index)
4371 dmi_read(target, &value, DM_PROGBUF0 + index);
4375 int riscv013_execute_debug_buffer(struct target *target)
4377 uint32_t run_program = 0;
4378 run_program = set_field(run_program, AC_ACCESS_REGISTER_AARSIZE, 2);
4379 run_program = set_field(run_program, AC_ACCESS_REGISTER_POSTEXEC, 1);
4380 run_program = set_field(run_program, AC_ACCESS_REGISTER_TRANSFER, 0);
4381 run_program = set_field(run_program, AC_ACCESS_REGISTER_REGNO, 0x1000);
4383 return execute_abstract_command(target, run_program);
4386 void riscv013_fill_dmi_write_u64(struct target *target, char *buf, int a, uint64_t d)
4388 RISCV013_INFO(info);
4389 buf_set_u64((unsigned char *)buf, DTM_DMI_OP_OFFSET, DTM_DMI_OP_LENGTH, DMI_OP_WRITE);
4390 buf_set_u64((unsigned char *)buf, DTM_DMI_DATA_OFFSET, DTM_DMI_DATA_LENGTH, d);
4391 buf_set_u64((unsigned char *)buf, DTM_DMI_ADDRESS_OFFSET, info->abits, a);
4394 void riscv013_fill_dmi_read_u64(struct target *target, char *buf, int a)
4396 RISCV013_INFO(info);
4397 buf_set_u64((unsigned char *)buf, DTM_DMI_OP_OFFSET, DTM_DMI_OP_LENGTH, DMI_OP_READ);
4398 buf_set_u64((unsigned char *)buf, DTM_DMI_DATA_OFFSET, DTM_DMI_DATA_LENGTH, 0);
4399 buf_set_u64((unsigned char *)buf, DTM_DMI_ADDRESS_OFFSET, info->abits, a);
4402 void riscv013_fill_dmi_nop_u64(struct target *target, char *buf)
4404 RISCV013_INFO(info);
4405 buf_set_u64((unsigned char *)buf, DTM_DMI_OP_OFFSET, DTM_DMI_OP_LENGTH, DMI_OP_NOP);
4406 buf_set_u64((unsigned char *)buf, DTM_DMI_DATA_OFFSET, DTM_DMI_DATA_LENGTH, 0);
4407 buf_set_u64((unsigned char *)buf, DTM_DMI_ADDRESS_OFFSET, info->abits, 0);
4410 /* Helper function for riscv013_test_sba_config_reg */
4411 static int get_max_sbaccess(struct target *target)
4413 RISCV013_INFO(info);
4415 uint32_t sbaccess128 = get_field(info->sbcs, DM_SBCS_SBACCESS128);
4416 uint32_t sbaccess64 = get_field(info->sbcs, DM_SBCS_SBACCESS64);
4417 uint32_t sbaccess32 = get_field(info->sbcs, DM_SBCS_SBACCESS32);
4418 uint32_t sbaccess16 = get_field(info->sbcs, DM_SBCS_SBACCESS16);
4419 uint32_t sbaccess8 = get_field(info->sbcs, DM_SBCS_SBACCESS8);
4423 else if (sbaccess64)
4425 else if (sbaccess32)
4427 else if (sbaccess16)
4435 static uint32_t get_num_sbdata_regs(struct target *target)
4437 RISCV013_INFO(info);
4439 uint32_t sbaccess128 = get_field(info->sbcs, DM_SBCS_SBACCESS128);
4440 uint32_t sbaccess64 = get_field(info->sbcs, DM_SBCS_SBACCESS64);
4441 uint32_t sbaccess32 = get_field(info->sbcs, DM_SBCS_SBACCESS32);
4445 else if (sbaccess64)
4447 else if (sbaccess32)
4453 static int riscv013_test_sba_config_reg(struct target *target,
4454 target_addr_t legal_address, uint32_t num_words,
4455 target_addr_t illegal_address, bool run_sbbusyerror_test)
4457 LOG_INFO("Testing System Bus Access as defined by RISC-V Debug Spec v0.13");
4459 uint32_t tests_failed = 0;
4463 dmi_read(target, &sbcs_orig, DM_SBCS);
4465 uint32_t sbcs = sbcs_orig;
4468 int max_sbaccess = get_max_sbaccess(target);
4470 if (max_sbaccess == -1) {
4471 LOG_ERROR("System Bus Access not supported in this config.");
4475 if (get_field(sbcs, DM_SBCS_SBVERSION) != 1) {
4476 LOG_ERROR("System Bus Access unsupported SBVERSION (%d). Only version 1 is supported.",
4477 get_field(sbcs, DM_SBCS_SBVERSION));
4481 uint32_t num_sbdata_regs = get_num_sbdata_regs(target);
4482 assert(num_sbdata_regs);
4484 uint32_t rd_buf[num_sbdata_regs];
4486 /* Test 1: Simple write/read test */
4488 sbcs = set_field(sbcs_orig, DM_SBCS_SBAUTOINCREMENT, 0);
4489 dmi_write(target, DM_SBCS, sbcs);
4491 uint32_t test_patterns[4] = {0xdeadbeef, 0xfeedbabe, 0x12345678, 0x08675309};
4492 for (uint32_t sbaccess = 0; sbaccess <= (uint32_t)max_sbaccess; sbaccess++) {
4493 sbcs = set_field(sbcs, DM_SBCS_SBACCESS, sbaccess);
4494 dmi_write(target, DM_SBCS, sbcs);
4496 uint32_t compare_mask = (sbaccess == 0) ? 0xff : (sbaccess == 1) ? 0xffff : 0xffffffff;
4498 for (uint32_t i = 0; i < num_words; i++) {
4499 uint32_t addr = legal_address + (i << sbaccess);
4500 uint32_t wr_data[num_sbdata_regs];
4501 for (uint32_t j = 0; j < num_sbdata_regs; j++)
4502 wr_data[j] = test_patterns[j] + i;
4503 write_memory_sba_simple(target, addr, wr_data, num_sbdata_regs, sbcs);
4506 for (uint32_t i = 0; i < num_words; i++) {
4507 uint32_t addr = legal_address + (i << sbaccess);
4508 read_memory_sba_simple(target, addr, rd_buf, num_sbdata_regs, sbcs);
4509 for (uint32_t j = 0; j < num_sbdata_regs; j++) {
4510 if (((test_patterns[j]+i)&compare_mask) != (rd_buf[j]&compare_mask)) {
4511 LOG_ERROR("System Bus Access Test 1: Error reading non-autoincremented address %x,"
4512 "expected val = %x, read val = %x", addr, test_patterns[j]+i, rd_buf[j]);
4513 test_passed = false;
4520 LOG_INFO("System Bus Access Test 1: Simple write/read test PASSED.");
4522 /* Test 2: Address autoincrement test */
4523 target_addr_t curr_addr;
4524 target_addr_t prev_addr;
4526 sbcs = set_field(sbcs_orig, DM_SBCS_SBAUTOINCREMENT, 1);
4527 dmi_write(target, DM_SBCS, sbcs);
4529 for (uint32_t sbaccess = 0; sbaccess <= (uint32_t)max_sbaccess; sbaccess++) {
4530 sbcs = set_field(sbcs, DM_SBCS_SBACCESS, sbaccess);
4531 dmi_write(target, DM_SBCS, sbcs);
4533 dmi_write(target, DM_SBADDRESS0, legal_address);
4534 read_sbcs_nonbusy(target, &sbcs);
4535 curr_addr = legal_address;
4536 for (uint32_t i = 0; i < num_words; i++) {
4537 prev_addr = curr_addr;
4538 read_sbcs_nonbusy(target, &sbcs);
4539 curr_addr = sb_read_address(target);
4540 if ((curr_addr - prev_addr != (uint32_t)(1 << sbaccess)) && (i != 0)) {
4541 LOG_ERROR("System Bus Access Test 2: Error with address auto-increment, sbaccess = %x.", sbaccess);
4542 test_passed = false;
4545 dmi_write(target, DM_SBDATA0, i);
4548 read_sbcs_nonbusy(target, &sbcs);
4550 dmi_write(target, DM_SBADDRESS0, legal_address);
4553 sbcs = set_field(sbcs, DM_SBCS_SBREADONDATA, 1);
4554 dmi_write(target, DM_SBCS, sbcs);
4555 dmi_read(target, &val, DM_SBDATA0); /* Dummy read to trigger first system bus read */
4556 curr_addr = legal_address;
4557 for (uint32_t i = 0; i < num_words; i++) {
4558 prev_addr = curr_addr;
4559 read_sbcs_nonbusy(target, &sbcs);
4560 curr_addr = sb_read_address(target);
4561 if ((curr_addr - prev_addr != (uint32_t)(1 << sbaccess)) && (i != 0)) {
4562 LOG_ERROR("System Bus Access Test 2: Error with address auto-increment, sbaccess = %x", sbaccess);
4563 test_passed = false;
4566 dmi_read(target, &val, DM_SBDATA0);
4567 read_sbcs_nonbusy(target, &sbcs);
4569 LOG_ERROR("System Bus Access Test 2: Error reading auto-incremented address,"
4570 "expected val = %x, read val = %x.", i, val);
4571 test_passed = false;
4577 LOG_INFO("System Bus Access Test 2: Address auto-increment test PASSED.");
4579 /* Test 3: Read from illegal address */
4580 read_memory_sba_simple(target, illegal_address, rd_buf, 1, sbcs_orig);
4582 dmi_read(target, &rd_val, DM_SBCS);
4583 if (get_field(rd_val, DM_SBCS_SBERROR) == 2) {
4584 sbcs = set_field(sbcs_orig, DM_SBCS_SBERROR, 2);
4585 dmi_write(target, DM_SBCS, sbcs);
4586 dmi_read(target, &rd_val, DM_SBCS);
4587 if (get_field(rd_val, DM_SBCS_SBERROR) == 0)
4588 LOG_INFO("System Bus Access Test 3: Illegal address read test PASSED.");
4590 LOG_ERROR("System Bus Access Test 3: Illegal address read test FAILED, unable to clear to 0.");
4592 LOG_ERROR("System Bus Access Test 3: Illegal address read test FAILED, unable to set error code.");
4595 /* Test 4: Write to illegal address */
4596 write_memory_sba_simple(target, illegal_address, test_patterns, 1, sbcs_orig);
4598 dmi_read(target, &rd_val, DM_SBCS);
4599 if (get_field(rd_val, DM_SBCS_SBERROR) == 2) {
4600 sbcs = set_field(sbcs_orig, DM_SBCS_SBERROR, 2);
4601 dmi_write(target, DM_SBCS, sbcs);
4602 dmi_read(target, &rd_val, DM_SBCS);
4603 if (get_field(rd_val, DM_SBCS_SBERROR) == 0)
4604 LOG_INFO("System Bus Access Test 4: Illegal address write test PASSED.");
4606 LOG_ERROR("System Bus Access Test 4: Illegal address write test FAILED, unable to clear to 0.");
4610 LOG_ERROR("System Bus Access Test 4: Illegal address write test FAILED, unable to set error code.");
4614 /* Test 5: Write with unsupported sbaccess size */
4615 uint32_t sbaccess128 = get_field(sbcs_orig, DM_SBCS_SBACCESS128);
4618 LOG_INFO("System Bus Access Test 5: SBCS sbaccess error test PASSED, all sbaccess sizes supported.");
4620 sbcs = set_field(sbcs_orig, DM_SBCS_SBACCESS, 4);
4622 write_memory_sba_simple(target, legal_address, test_patterns, 1, sbcs);
4624 dmi_read(target, &rd_val, DM_SBCS);
4625 if (get_field(rd_val, DM_SBCS_SBERROR) == 4) {
4626 sbcs = set_field(sbcs_orig, DM_SBCS_SBERROR, 4);
4627 dmi_write(target, DM_SBCS, sbcs);
4628 dmi_read(target, &rd_val, DM_SBCS);
4629 if (get_field(rd_val, DM_SBCS_SBERROR) == 0)
4630 LOG_INFO("System Bus Access Test 5: SBCS sbaccess error test PASSED.");
4632 LOG_ERROR("System Bus Access Test 5: SBCS sbaccess error test FAILED, unable to clear to 0.");
4636 LOG_ERROR("System Bus Access Test 5: SBCS sbaccess error test FAILED, unable to set error code.");
4641 /* Test 6: Write to misaligned address */
4642 sbcs = set_field(sbcs_orig, DM_SBCS_SBACCESS, 1);
4644 write_memory_sba_simple(target, legal_address+1, test_patterns, 1, sbcs);
4646 dmi_read(target, &rd_val, DM_SBCS);
4647 if (get_field(rd_val, DM_SBCS_SBERROR) == 3) {
4648 sbcs = set_field(sbcs_orig, DM_SBCS_SBERROR, 3);
4649 dmi_write(target, DM_SBCS, sbcs);
4650 dmi_read(target, &rd_val, DM_SBCS);
4651 if (get_field(rd_val, DM_SBCS_SBERROR) == 0)
4652 LOG_INFO("System Bus Access Test 6: SBCS address alignment error test PASSED");
4654 LOG_ERROR("System Bus Access Test 6: SBCS address alignment error test FAILED, unable to clear to 0.");
4658 LOG_ERROR("System Bus Access Test 6: SBCS address alignment error test FAILED, unable to set error code.");
4662 /* Test 7: Set sbbusyerror, only run this case in simulation as it is likely
4663 * impossible to hit otherwise */
4664 if (run_sbbusyerror_test) {
4665 sbcs = set_field(sbcs_orig, DM_SBCS_SBREADONADDR, 1);
4666 dmi_write(target, DM_SBCS, sbcs);
4668 for (int i = 0; i < 16; i++)
4669 dmi_write(target, DM_SBDATA0, 0xdeadbeef);
4671 for (int i = 0; i < 16; i++)
4672 dmi_write(target, DM_SBADDRESS0, legal_address);
4674 dmi_read(target, &rd_val, DM_SBCS);
4675 if (get_field(rd_val, DM_SBCS_SBBUSYERROR)) {
4676 sbcs = set_field(sbcs_orig, DM_SBCS_SBBUSYERROR, 1);
4677 dmi_write(target, DM_SBCS, sbcs);
4678 dmi_read(target, &rd_val, DM_SBCS);
4679 if (get_field(rd_val, DM_SBCS_SBBUSYERROR) == 0)
4680 LOG_INFO("System Bus Access Test 7: SBCS sbbusyerror test PASSED.");
4682 LOG_ERROR("System Bus Access Test 7: SBCS sbbusyerror test FAILED, unable to clear to 0.");
4686 LOG_ERROR("System Bus Access Test 7: SBCS sbbusyerror test FAILED, unable to set error code.");
4691 if (tests_failed == 0) {
4692 LOG_INFO("ALL TESTS PASSED");
4695 LOG_ERROR("%d TESTS FAILED", tests_failed);
4701 void write_memory_sba_simple(struct target *target, target_addr_t addr,
4702 uint32_t *write_data, uint32_t write_size, uint32_t sbcs)
4704 RISCV013_INFO(info);
4707 uint32_t masked_addr;
4709 uint32_t sba_size = get_field(info->sbcs, DM_SBCS_SBASIZE);
4711 read_sbcs_nonbusy(target, &rd_sbcs);
4713 uint32_t sbcs_no_readonaddr = set_field(sbcs, DM_SBCS_SBREADONADDR, 0);
4714 dmi_write(target, DM_SBCS, sbcs_no_readonaddr);
4716 for (uint32_t i = 0; i < sba_size/32; i++) {
4717 masked_addr = (addr >> 32*i) & 0xffffffff;
4720 dmi_write(target, DM_SBADDRESS0+i, masked_addr);
4722 dmi_write(target, DM_SBADDRESS3, masked_addr);
4725 /* Write SBDATA registers starting with highest address, since write to
4726 * SBDATA0 triggers write */
4727 for (int i = write_size-1; i >= 0; i--)
4728 dmi_write(target, DM_SBDATA0+i, write_data[i]);
4731 void read_memory_sba_simple(struct target *target, target_addr_t addr,
4732 uint32_t *rd_buf, uint32_t read_size, uint32_t sbcs)
4734 RISCV013_INFO(info);
4737 uint32_t masked_addr;
4739 uint32_t sba_size = get_field(info->sbcs, DM_SBCS_SBASIZE);
4741 read_sbcs_nonbusy(target, &rd_sbcs);
4743 uint32_t sbcs_readonaddr = set_field(sbcs, DM_SBCS_SBREADONADDR, 1);
4744 dmi_write(target, DM_SBCS, sbcs_readonaddr);
4746 /* Write addresses starting with highest address register */
4747 for (int i = sba_size/32-1; i >= 0; i--) {
4748 masked_addr = (addr >> 32*i) & 0xffffffff;
4751 dmi_write(target, DM_SBADDRESS0+i, masked_addr);
4753 dmi_write(target, DM_SBADDRESS3, masked_addr);
4756 read_sbcs_nonbusy(target, &rd_sbcs);
4758 for (uint32_t i = 0; i < read_size; i++)
4759 dmi_read(target, &(rd_buf[i]), DM_SBDATA0+i);
4762 int riscv013_dmi_write_u64_bits(struct target *target)
4764 RISCV013_INFO(info);
4765 return info->abits + DTM_DMI_DATA_LENGTH + DTM_DMI_OP_LENGTH;
4768 static int maybe_execute_fence_i(struct target *target)
4770 if (has_sufficient_progbuf(target, 3))
4771 return execute_fence(target);
4775 /* Helper Functions. */
4776 static int riscv013_on_step_or_resume(struct target *target, bool step)
4778 if (maybe_execute_fence_i(target) != ERROR_OK)
4781 /* We want to twiddle some bits in the debug CSR so debugging works. */
4783 int result = register_read(target, &dcsr, GDB_REGNO_DCSR);
4784 if (result != ERROR_OK)
4786 dcsr = set_field(dcsr, CSR_DCSR_STEP, step);
4787 dcsr = set_field(dcsr, CSR_DCSR_EBREAKM, riscv_ebreakm);
4788 dcsr = set_field(dcsr, CSR_DCSR_EBREAKS, riscv_ebreaks);
4789 dcsr = set_field(dcsr, CSR_DCSR_EBREAKU, riscv_ebreaku);
4790 return riscv_set_register(target, GDB_REGNO_DCSR, dcsr);
4793 static int riscv013_step_or_resume_current_hart(struct target *target,
4794 bool step, bool use_hasel)
4797 LOG_DEBUG("resuming hart %d (for step?=%d)", r->current_hartid, step);
4798 if (!riscv_is_halted(target)) {
4799 LOG_ERROR("Hart %d is not halted!", r->current_hartid);
4803 /* Issue the resume command, and then wait for the current hart to resume. */
4804 uint32_t dmcontrol = DM_DMCONTROL_DMACTIVE | DM_DMCONTROL_RESUMEREQ;
4806 dmcontrol |= DM_DMCONTROL_HASEL;
4807 dmcontrol = set_hartsel(dmcontrol, r->current_hartid);
4808 dmi_write(target, DM_DMCONTROL, dmcontrol);
4810 dmcontrol = set_field(dmcontrol, DM_DMCONTROL_HASEL, 0);
4811 dmcontrol = set_field(dmcontrol, DM_DMCONTROL_RESUMEREQ, 0);
4814 for (size_t i = 0; i < 256; ++i) {
4816 if (dmstatus_read(target, &dmstatus, true) != ERROR_OK)
4818 if (get_field(dmstatus, DM_DMSTATUS_ALLRESUMEACK) == 0)
4820 if (step && get_field(dmstatus, DM_DMSTATUS_ALLHALTED) == 0)
4823 dmi_write(target, DM_DMCONTROL, dmcontrol);
4827 dmi_write(target, DM_DMCONTROL, dmcontrol);
4829 LOG_ERROR("unable to resume hart %d", r->current_hartid);
4830 if (dmstatus_read(target, &dmstatus, true) != ERROR_OK)
4832 LOG_ERROR(" dmstatus =0x%08x", dmstatus);
4835 LOG_ERROR(" was stepping, halting");
4843 void riscv013_clear_abstract_error(struct target *target)
4845 /* Wait for busy to go away. */
4846 time_t start = time(NULL);
4847 uint32_t abstractcs;
4848 dmi_read(target, &abstractcs, DM_ABSTRACTCS);
4849 while (get_field(abstractcs, DM_ABSTRACTCS_BUSY)) {
4850 dmi_read(target, &abstractcs, DM_ABSTRACTCS);
4852 if (time(NULL) - start > riscv_command_timeout_sec) {
4853 LOG_ERROR("abstractcs.busy is not going low after %d seconds "
4854 "(abstractcs=0x%x). The target is either really slow or "
4855 "broken. You could increase the timeout with riscv "
4856 "set_command_timeout_sec.",
4857 riscv_command_timeout_sec, abstractcs);
4861 /* Clear the error status. */
4862 dmi_write(target, DM_ABSTRACTCS, DM_ABSTRACTCS_CMDERR);