git.gag.com Git - fw/openocd/blob - src/target/arm_adi_v5.c

   1 /***************************************************************************
   2  *   Copyright (C) 2006 by Magnus Lundin                                   *
   3  *   lundin@mlu.mine.nu                                                    *
   4  *                                                                         *
   5  *   Copyright (C) 2008 by Spencer Oliver                                  *
   6  *   spen@spen-soft.co.uk                                                  *
   7  *                                                                         *
   8  *   Copyright (C) 2009-2010 by Oyvind Harboe                              *
   9  *   oyvind.harboe@zylin.com                                               *
  10  *                                                                         *
  11  *   Copyright (C) 2009-2010 by David Brownell                             *
  12  *                                                                         *
  13  *   This program is free software; you can redistribute it and/or modify  *
  14  *   it under the terms of the GNU General Public License as published by  *
  15  *   the Free Software Foundation; either version 2 of the License, or     *
  16  *   (at your option) any later version.                                   *
  17  *                                                                         *
  18  *   This program is distributed in the hope that it will be useful,       *
  19  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  20  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  21  *   GNU General Public License for more details.                          *
  22  *                                                                         *
  23  *   You should have received a copy of the GNU General Public License     *
  24  *   along with this program; if not, write to the                         *
  25  *   Free Software Foundation, Inc.,                                       *
  26  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  27  ***************************************************************************/
  28
  29 /**
  30  * @file
  31  * This file implements support for the ARM Debug Interface version 5 (ADIv5)
  32  * debugging architecture.  Compared with previous versions, this includes
  33  * a low pin-count Serial Wire Debug (SWD) alternative to JTAG for message
  34  * transport, and focusses on memory mapped resources as defined by the
  35  * CoreSight architecture.
  36  *
  37  * A key concept in ADIv5 is the Debug Access Port, or DAP.  A DAP has two
  38  * basic components:  a Debug Port (DP) transporting messages to and from a
  39  * debugger, and an Access Port (AP) accessing resources.  Three types of DP
  40  * are defined.  One uses only JTAG for communication, and is called JTAG-DP.
  41  * One uses only SWD for communication, and is called SW-DP.  The third can
  42  * use either SWD or JTAG, and is called SWJ-DP.  The most common type of AP
  43  * is used to access memory mapped resources and is called a MEM-AP.  Also a
  44  * JTAG-AP is also defined, bridging to JTAG resources; those are uncommon.
  45  *
  46  * This programming interface allows DAP pipelined operations through a
  47  * transaction queue.  This primarily affects AP operations (such as using
  48  * a MEM-AP to access memory or registers).  If the current transaction has
  49  * not finished by the time the next one must begin, and the ORUNDETECT bit
  50  * is set in the DP_CTRL_STAT register, the SSTICKYORUN status is set and
  51  * further AP operations will fail.  There are two basic methods to avoid
  52  * such overrun errors.  One involves polling for status instead of using
  53  * transaction piplining.  The other involves adding delays to ensure the
  54  * AP has enough time to complete one operation before starting the next
  55  * one.  (For JTAG these delays are controlled by memaccess_tck.)
  56  */
  57
  58 /*
  59  * Relevant specifications from ARM include:
  60  *
  61  * ARM(tm) Debug Interface v5 Architecture Specification    ARM IHI 0031A
  62  * CoreSight(tm) v1.0 Architecture Specification            ARM IHI 0029B
  63  *
  64  * CoreSight(tm) DAP-Lite TRM, ARM DDI 0316D
  65  * Cortex-M3(tm) TRM, ARM DDI 0337G
  66  */
  67
  68 #ifdef HAVE_CONFIG_H
  69 #include "config.h"
  70 #endif
  71
  72 #include "jtag/interface.h"
  73 #include "arm.h"
  74 #include "arm_adi_v5.h"
  75 #include <helper/time_support.h>
  76
  77 /* ARM ADI Specification requires at least 10 bits used for TAR autoincrement  */
  78
  79 /*
  80         uint32_t tar_block_size(uint32_t address)
  81         Return the largest block starting at address that does not cross a tar block size alignment boundary
  82 */
  83 static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, uint32_t address)
  84 {
  85         return (tar_autoincr_block - ((tar_autoincr_block - 1) & address)) >> 2;
  86 }
  87
  88 /***************************************************************************
  89  *                                                                         *
  90  * DP and MEM-AP  register access  through APACC and DPACC                 *
  91  *                                                                         *
  92 ***************************************************************************/
  93
  94 /**
  95  * Select one of the APs connected to the specified DAP.  The
  96  * selection is implicitly used with future AP transactions.
  97  * This is a NOP if the specified AP is already selected.
  98  *
  99  * @param dap The DAP
 100  * @param apsel Number of the AP to (implicitly) use with further
 101  *      transactions.  This normally identifies a MEM-AP.
 102  */
 103 void dap_ap_select(struct adiv5_dap *dap, uint8_t ap)
 104 {
 105         uint32_t new_ap = (ap << 24) & 0xFF000000;
 106
 107         if (new_ap != dap->ap_current) {
 108                 dap->ap_current = new_ap;
 109                 /* Switching AP invalidates cached values.
 110                  * Values MUST BE UPDATED BEFORE AP ACCESS.
 111                  */
 112                 dap->ap_bank_value = -1;
 113                 dap->ap_csw_value = -1;
 114                 dap->ap_tar_value = -1;
 115         }
 116 }
 117
 118 /**
 119  * Queue transactions setting up transfer parameters for the
 120  * currently selected MEM-AP.
 121  *
 122  * Subsequent transfers using registers like AP_REG_DRW or AP_REG_BD2
 123  * initiate data reads or writes using memory or peripheral addresses.
 124  * If the CSW is configured for it, the TAR may be automatically
 125  * incremented after each transfer.
 126  *
 127  * @todo Rename to reflect it being specifically a MEM-AP function.
 128  *
 129  * @param dap The DAP connected to the MEM-AP.
 130  * @param csw MEM-AP Control/Status Word (CSW) register to assign.  If this
 131  *      matches the cached value, the register is not changed.
 132  * @param tar MEM-AP Transfer Address Register (TAR) to assign.  If this
 133  *      matches the cached address, the register is not changed.
 134  *
 135  * @return ERROR_OK if the transaction was properly queued, else a fault code.
 136  */
 137 int dap_setup_accessport(struct adiv5_dap *dap, uint32_t csw, uint32_t tar)
 138 {
 139         int retval;
 140
 141         csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT;
 142         if (csw != dap->ap_csw_value) {
 143                 /* LOG_DEBUG("DAP: Set CSW %x",csw); */
 144                 retval = dap_queue_ap_write(dap, AP_REG_CSW, csw);
 145                 if (retval != ERROR_OK)
 146                         return retval;
 147                 dap->ap_csw_value = csw;
 148         }
 149         if (tar != dap->ap_tar_value) {
 150                 /* LOG_DEBUG("DAP: Set TAR %x",tar); */
 151                 retval = dap_queue_ap_write(dap, AP_REG_TAR, tar);
 152                 if (retval != ERROR_OK)
 153                         return retval;
 154                 dap->ap_tar_value = tar;
 155         }
 156         /* Disable TAR cache when autoincrementing */
 157         if (csw & CSW_ADDRINC_MASK)
 158                 dap->ap_tar_value = -1;
 159         return ERROR_OK;
 160 }
 161
 162 /**
 163  * Asynchronous (queued) read of a word from memory or a system register.
 164  *
 165  * @param dap The DAP connected to the MEM-AP performing the read.
 166  * @param address Address of the 32-bit word to read; it must be
 167  *      readable by the currently selected MEM-AP.
 168  * @param value points to where the word will be stored when the
 169  *      transaction queue is flushed (assuming no errors).
 170  *
 171  * @return ERROR_OK for success.  Otherwise a fault code.
 172  */
 173 int mem_ap_read_u32(struct adiv5_dap *dap, uint32_t address,
 174                 uint32_t *value)
 175 {
 176         int retval;
 177
 178         /* Use banked addressing (REG_BDx) to avoid some link traffic
 179          * (updating TAR) when reading several consecutive addresses.
 180          */
 181         retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
 182                         address & 0xFFFFFFF0);
 183         if (retval != ERROR_OK)
 184                 return retval;
 185
 186         return dap_queue_ap_read(dap, AP_REG_BD0 | (address & 0xC), value);
 187 }
 188
 189 /**
 190  * Synchronous read of a word from memory or a system register.
 191  * As a side effect, this flushes any queued transactions.
 192  *
 193  * @param dap The DAP connected to the MEM-AP performing the read.
 194  * @param address Address of the 32-bit word to read; it must be
 195  *      readable by the currently selected MEM-AP.
 196  * @param value points to where the result will be stored.
 197  *
 198  * @return ERROR_OK for success; *value holds the result.
 199  * Otherwise a fault code.
 200  */
 201 int mem_ap_read_atomic_u32(struct adiv5_dap *dap, uint32_t address,
 202                 uint32_t *value)
 203 {
 204         int retval;
 205
 206         retval = mem_ap_read_u32(dap, address, value);
 207         if (retval != ERROR_OK)
 208                 return retval;
 209
 210         return dap_run(dap);
 211 }
 212
 213 /**
 214  * Asynchronous (queued) write of a word to memory or a system register.
 215  *
 216  * @param dap The DAP connected to the MEM-AP.
 217  * @param address Address to be written; it must be writable by
 218  *      the currently selected MEM-AP.
 219  * @param value Word that will be written to the address when transaction
 220  *      queue is flushed (assuming no errors).
 221  *
 222  * @return ERROR_OK for success.  Otherwise a fault code.
 223  */
 224 int mem_ap_write_u32(struct adiv5_dap *dap, uint32_t address,
 225                 uint32_t value)
 226 {
 227         int retval;
 228
 229         /* Use banked addressing (REG_BDx) to avoid some link traffic
 230          * (updating TAR) when writing several consecutive addresses.
 231          */
 232         retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
 233                         address & 0xFFFFFFF0);
 234         if (retval != ERROR_OK)
 235                 return retval;
 236
 237         return dap_queue_ap_write(dap, AP_REG_BD0 | (address & 0xC),
 238                         value);
 239 }
 240
 241 /**
 242  * Synchronous write of a word to memory or a system register.
 243  * As a side effect, this flushes any queued transactions.
 244  *
 245  * @param dap The DAP connected to the MEM-AP.
 246  * @param address Address to be written; it must be writable by
 247  *      the currently selected MEM-AP.
 248  * @param value Word that will be written.
 249  *
 250  * @return ERROR_OK for success; the data was written.  Otherwise a fault code.
 251  */
 252 int mem_ap_write_atomic_u32(struct adiv5_dap *dap, uint32_t address,
 253                 uint32_t value)
 254 {
 255         int retval = mem_ap_write_u32(dap, address, value);
 256
 257         if (retval != ERROR_OK)
 258                 return retval;
 259
 260         return dap_run(dap);
 261 }
 262
 263 /*****************************************************************************
 264 *                                                                            *
 265 * mem_ap_write_buf(struct adiv5_dap *dap, uint8_t *buffer, int count, uint32_t address) *
 266 *                                                                            *
 267 * Write a buffer in target order (little endian)                             *
 268 *                                                                            *
 269 *****************************************************************************/
 270 int mem_ap_write_buf_u32(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
 271 {
 272         int wcount, blocksize, writecount, errorcount = 0, retval = ERROR_OK;
 273         uint32_t adr = address;
 274         const uint8_t *pBuffer = buffer;
 275
 276         count >>= 2;
 277         wcount = count;
 278
 279         /* if we have an unaligned access - reorder data */
 280         if (adr & 0x3u) {
 281                 for (writecount = 0; writecount < count; writecount++) {
 282                         int i;
 283                         uint32_t outvalue;
 284                         memcpy(&outvalue, pBuffer, sizeof(uint32_t));
 285
 286                         for (i = 0; i < 4; i++) {
 287                                 *((uint8_t *)pBuffer + (adr & 0x3)) = outvalue;
 288                                 outvalue >>= 8;
 289                                 adr++;
 290                         }
 291                         pBuffer += sizeof(uint32_t);
 292                 }
 293         }
 294
 295         while (wcount > 0) {
 296                 /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
 297                 blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
 298                 if (wcount < blocksize)
 299                         blocksize = wcount;
 300
 301                 /* handle unaligned data at 4k boundary */
 302                 if (blocksize == 0)
 303                         blocksize = 1;
 304
 305                 retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_SINGLE, address);
 306                 if (retval != ERROR_OK)
 307                         return retval;
 308
 309                 for (writecount = 0; writecount < blocksize; writecount++) {
 310                         retval = dap_queue_ap_write(dap, AP_REG_DRW,
 311                                 *(uint32_t *) ((void *) (buffer + 4 * writecount)));
 312                         if (retval != ERROR_OK)
 313                                 break;
 314                 }
 315
 316                 retval = dap_run(dap);
 317                 if (retval == ERROR_OK) {
 318                         wcount = wcount - blocksize;
 319                         address = address + 4 * blocksize;
 320                         buffer = buffer + 4 * blocksize;
 321                 } else
 322                         errorcount++;
 323
 324                 if (errorcount > 1) {
 325                         LOG_WARNING("Block write error address 0x%" PRIx32 ", wcount 0x%x", address, wcount);
 326                         return retval;
 327                 }
 328         }
 329
 330         return retval;
 331 }
 332
 333 static int mem_ap_write_buf_packed_u16(struct adiv5_dap *dap,
 334                 const uint8_t *buffer, int count, uint32_t address)
 335 {
 336         int retval = ERROR_OK;
 337         int wcount, blocksize, writecount, i;
 338
 339         wcount = count >> 1;
 340
 341         while (wcount > 0) {
 342                 int nbytes;
 343
 344                 /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
 345                 blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
 346
 347                 if (wcount < blocksize)
 348                         blocksize = wcount;
 349
 350                 /* handle unaligned data at 4k boundary */
 351                 if (blocksize == 0)
 352                         blocksize = 1;
 353
 354                 retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_PACKED, address);
 355                 if (retval != ERROR_OK)
 356                         return retval;
 357                 writecount = blocksize;
 358
 359                 do {
 360                         nbytes = MIN((writecount << 1), 4);
 361
 362                         if (nbytes < 4) {
 363                                 retval = mem_ap_write_buf_u16(dap, buffer,
 364                                                 nbytes, address);
 365                                 if (retval != ERROR_OK) {
 366                                         LOG_WARNING("Block write error address "
 367                                                 "0x%" PRIx32 ", count 0x%x",
 368                                                 address, count);
 369                                         return retval;
 370                                 }
 371
 372                                 address += nbytes >> 1;
 373                         } else {
 374                                 uint32_t outvalue;
 375                                 memcpy(&outvalue, buffer, sizeof(uint32_t));
 376
 377                                 for (i = 0; i < nbytes; i++) {
 378                                         *((uint8_t *)buffer + (address & 0x3)) = outvalue;
 379                                         outvalue >>= 8;
 380                                         address++;
 381                                 }
 382
 383                                 memcpy(&outvalue, buffer, sizeof(uint32_t));
 384                                 retval = dap_queue_ap_write(dap,
 385                                                 AP_REG_DRW, outvalue);
 386                                 if (retval != ERROR_OK)
 387                                         break;
 388
 389                                 retval = dap_run(dap);
 390                                 if (retval != ERROR_OK) {
 391                                         LOG_WARNING("Block write error address "
 392                                                 "0x%" PRIx32 ", count 0x%x",
 393                                                 address, count);
 394                                         return retval;
 395                                 }
 396                         }
 397
 398                         buffer += nbytes >> 1;
 399                         writecount -= nbytes >> 1;
 400
 401                 } while (writecount);
 402                 wcount -= blocksize;
 403         }
 404
 405         return retval;
 406 }
 407
 408 int mem_ap_write_buf_u16(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
 409 {
 410         int retval = ERROR_OK;
 411
 412         if (count >= 4)
 413                 return mem_ap_write_buf_packed_u16(dap, buffer, count, address);
 414
 415         while (count > 0) {
 416                 retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
 417                 if (retval != ERROR_OK)
 418                         return retval;
 419                 uint16_t svalue;
 420                 memcpy(&svalue, buffer, sizeof(uint16_t));
 421                 uint32_t outvalue = (uint32_t)svalue << 8 * (address & 0x3);
 422                 retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
 423                 if (retval != ERROR_OK)
 424                         break;
 425
 426                 retval = dap_run(dap);
 427                 if (retval != ERROR_OK)
 428                         break;
 429
 430                 count -= 2;
 431                 address += 2;
 432                 buffer += 2;
 433         }
 434
 435         return retval;
 436 }
 437
 438 static int mem_ap_write_buf_packed_u8(struct adiv5_dap *dap,
 439                 const uint8_t *buffer, int count, uint32_t address)
 440 {
 441         int retval = ERROR_OK;
 442         int wcount, blocksize, writecount, i;
 443
 444         wcount = count;
 445
 446         while (wcount > 0) {
 447                 int nbytes;
 448
 449                 /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
 450                 blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
 451
 452                 if (wcount < blocksize)
 453                         blocksize = wcount;
 454
 455                 retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, address);
 456                 if (retval != ERROR_OK)
 457                         return retval;
 458                 writecount = blocksize;
 459
 460                 do {
 461                         nbytes = MIN(writecount, 4);
 462
 463                         if (nbytes < 4) {
 464                                 retval = mem_ap_write_buf_u8(dap, buffer, nbytes, address);
 465                                 if (retval != ERROR_OK) {
 466                                         LOG_WARNING("Block write error address "
 467                                                 "0x%" PRIx32 ", count 0x%x",
 468                                                 address, count);
 469                                         return retval;
 470                                 }
 471
 472                                 address += nbytes;
 473                         } else {
 474                                 uint32_t outvalue;
 475                                 memcpy(&outvalue, buffer, sizeof(uint32_t));
 476
 477                                 for (i = 0; i < nbytes; i++) {
 478                                         *((uint8_t *)buffer + (address & 0x3)) = outvalue;
 479                                         outvalue >>= 8;
 480                                         address++;
 481                                 }
 482
 483                                 memcpy(&outvalue, buffer, sizeof(uint32_t));
 484                                 retval = dap_queue_ap_write(dap,
 485                                                 AP_REG_DRW, outvalue);
 486                                 if (retval != ERROR_OK)
 487                                         break;
 488
 489                                 retval = dap_run(dap);
 490                                 if (retval != ERROR_OK) {
 491                                         LOG_WARNING("Block write error address "
 492                                                 "0x%" PRIx32 ", count 0x%x",
 493                                                 address, count);
 494                                         return retval;
 495                                 }
 496                         }
 497
 498                         buffer += nbytes;
 499                         writecount -= nbytes;
 500
 501                 } while (writecount);
 502                 wcount -= blocksize;
 503         }
 504
 505         return retval;
 506 }
 507
 508 int mem_ap_write_buf_u8(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
 509 {
 510         int retval = ERROR_OK;
 511
 512         if (count >= 4)
 513                 return mem_ap_write_buf_packed_u8(dap, buffer, count, address);
 514
 515         while (count > 0) {
 516                 retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
 517                 if (retval != ERROR_OK)
 518                         return retval;
 519                 uint32_t outvalue = (uint32_t)*buffer << 8 * (address & 0x3);
 520                 retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
 521                 if (retval != ERROR_OK)
 522                         break;
 523
 524                 retval = dap_run(dap);
 525                 if (retval != ERROR_OK)
 526                         break;
 527
 528                 count--;
 529                 address++;
 530                 buffer++;
 531         }
 532
 533         return retval;
 534 }
 535
 536 /* FIXME don't import ... this is a temporary workaround for the
 537  * mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific.
 538  */
 539 extern int adi_jtag_dp_scan(struct adiv5_dap *dap,
 540                 uint8_t instr, uint8_t reg_addr, uint8_t RnW,
 541                 uint8_t *outvalue, uint8_t *invalue, uint8_t *ack);
 542
 543 /**
 544  * Synchronously read a block of 32-bit words into a buffer
 545  * @param dap The DAP connected to the MEM-AP.
 546  * @param buffer where the words will be stored (in host byte order).
 547  * @param count How many words to read.
 548  * @param address Memory address from which to read words; all the
 549  *      words must be readable by the currently selected MEM-AP.
 550  */
 551 int mem_ap_read_buf_u32(struct adiv5_dap *dap, uint8_t *buffer,
 552                 int count, uint32_t address)
 553 {
 554         int wcount, blocksize, readcount, errorcount = 0, retval = ERROR_OK;
 555         uint32_t adr = address;
 556         uint8_t *pBuffer = buffer;
 557
 558         count >>= 2;
 559         wcount = count;
 560
 561         while (wcount > 0) {
 562                 /* Adjust to read blocks within boundaries aligned to the
 563                  * TAR autoincrement size (at least 2^10).  Autoincrement
 564                  * mode avoids an extra per-word roundtrip to update TAR.
 565                  */
 566                 blocksize = max_tar_block_size(dap->tar_autoincr_block,
 567                                 address);
 568                 if (wcount < blocksize)
 569                         blocksize = wcount;
 570
 571                 /* handle unaligned data at 4k boundary */
 572                 if (blocksize == 0)
 573                         blocksize = 1;
 574
 575                 retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_SINGLE,
 576                                 address);
 577                 if (retval != ERROR_OK)
 578                         return retval;
 579
 580                 /* FIXME remove these three calls to adi_jtag_dp_scan(),
 581                  * so this routine becomes transport-neutral.  Be careful
 582                  * not to cause performance problems with JTAG; would it
 583                  * suffice to loop over dap_queue_ap_read(), or would that
 584                  * be slower when JTAG is the chosen transport?
 585                  */
 586
 587                 /* Scan out first read */
 588                 retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, AP_REG_DRW,
 589                                 DPAP_READ, 0, NULL, NULL);
 590                 if (retval != ERROR_OK)
 591                         return retval;
 592                 for (readcount = 0; readcount < blocksize - 1; readcount++) {
 593                         /* Scan out next read; scan in posted value for the
 594                          * previous one.  Assumes read is acked "OK/FAULT",
 595                          * and CTRL_STAT says that meant "OK".
 596                          */
 597                         retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, AP_REG_DRW,
 598                                         DPAP_READ, 0, buffer + 4 * readcount,
 599                                         &dap->ack);
 600                         if (retval != ERROR_OK)
 601                                 return retval;
 602                 }
 603
 604                 /* Scan in last posted value; RDBUFF has no other effect,
 605                  * assuming ack is OK/FAULT and CTRL_STAT says "OK".
 606                  */
 607                 retval = adi_jtag_dp_scan(dap, JTAG_DP_DPACC, DP_RDBUFF,
 608                                 DPAP_READ, 0, buffer + 4 * readcount,
 609                                 &dap->ack);
 610                 if (retval != ERROR_OK)
 611                         return retval;
 612
 613                 retval = dap_run(dap);
 614                 if (retval != ERROR_OK) {
 615                         errorcount++;
 616                         if (errorcount <= 1) {
 617                                 /* try again */
 618                                 continue;
 619                         }
 620                         LOG_WARNING("Block read error address 0x%" PRIx32, address);
 621                         return retval;
 622                 }
 623                 wcount = wcount - blocksize;
 624                 address += 4 * blocksize;
 625                 buffer += 4 * blocksize;
 626         }
 627
 628         /* if we have an unaligned access - reorder data */
 629         if (adr & 0x3u) {
 630                 for (readcount = 0; readcount < count; readcount++) {
 631                         int i;
 632                         uint32_t data;
 633                         memcpy(&data, pBuffer, sizeof(uint32_t));
 634
 635                         for (i = 0; i < 4; i++) {
 636                                 *((uint8_t *)pBuffer) =
 637                                                 (data >> 8 * (adr & 0x3));
 638                                 pBuffer++;
 639                                 adr++;
 640                         }
 641                 }
 642         }
 643
 644         return retval;
 645 }
 646
 647 static int mem_ap_read_buf_packed_u16(struct adiv5_dap *dap,
 648                 uint8_t *buffer, int count, uint32_t address)
 649 {
 650         uint32_t invalue;
 651         int retval = ERROR_OK;
 652         int wcount, blocksize, readcount, i;
 653
 654         wcount = count >> 1;
 655
 656         while (wcount > 0) {
 657                 int nbytes;
 658
 659                 /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
 660                 blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
 661                 if (wcount < blocksize)
 662                         blocksize = wcount;
 663
 664                 retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_PACKED, address);
 665                 if (retval != ERROR_OK)
 666                         return retval;
 667
 668                 /* handle unaligned data at 4k boundary */
 669                 if (blocksize == 0)
 670                         blocksize = 1;
 671                 readcount = blocksize;
 672
 673                 do {
 674                         retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
 675                         if (retval != ERROR_OK)
 676                                 return retval;
 677                         retval = dap_run(dap);
 678                         if (retval != ERROR_OK) {
 679                                 LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
 680                                 return retval;
 681                         }
 682
 683                         nbytes = MIN((readcount << 1), 4);
 684
 685                         for (i = 0; i < nbytes; i++) {
 686                                 *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
 687                                 buffer++;
 688                                 address++;
 689                         }
 690
 691                         readcount -= (nbytes >> 1);
 692                 } while (readcount);
 693                 wcount -= blocksize;
 694         }
 695
 696         return retval;
 697 }
 698
 699 /**
 700  * Synchronously read a block of 16-bit halfwords into a buffer
 701  * @param dap The DAP connected to the MEM-AP.
 702  * @param buffer where the halfwords will be stored (in host byte order).
 703  * @param count How many halfwords to read.
 704  * @param address Memory address from which to read words; all the
 705  *      words must be readable by the currently selected MEM-AP.
 706  */
 707 int mem_ap_read_buf_u16(struct adiv5_dap *dap, uint8_t *buffer,
 708                 int count, uint32_t address)
 709 {
 710         uint32_t invalue, i;
 711         int retval = ERROR_OK;
 712
 713         if (count >= 4)
 714                 return mem_ap_read_buf_packed_u16(dap, buffer, count, address);
 715
 716         while (count > 0) {
 717                 retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
 718                 if (retval != ERROR_OK)
 719                         return retval;
 720                 retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
 721                 if (retval != ERROR_OK)
 722                         break;
 723
 724                 retval = dap_run(dap);
 725                 if (retval != ERROR_OK)
 726                         break;
 727
 728                 if (address & 0x1) {
 729                         for (i = 0; i < 2; i++) {
 730                                 *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
 731                                 buffer++;
 732                                 address++;
 733                         }
 734                 } else {
 735                         uint16_t svalue = (invalue >> 8 * (address & 0x3));
 736                         memcpy(buffer, &svalue, sizeof(uint16_t));
 737                         address += 2;
 738                         buffer += 2;
 739                 }
 740                 count -= 2;
 741         }
 742
 743         return retval;
 744 }
 745
 746 /* FIX!!! is this a potential performance bottleneck w.r.t. requiring too many
 747  * roundtrips when jtag_execute_queue() has a large overhead(e.g. for USB)s?
 748  *
 749  * The solution is to arrange for a large out/in scan in this loop and
 750  * and convert data afterwards.
 751  */
 752 static int mem_ap_read_buf_packed_u8(struct adiv5_dap *dap,
 753                 uint8_t *buffer, int count, uint32_t address)
 754 {
 755         uint32_t invalue;
 756         int retval = ERROR_OK;
 757         int wcount, blocksize, readcount, i;
 758
 759         wcount = count;
 760
 761         while (wcount > 0) {
 762                 int nbytes;
 763
 764                 /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
 765                 blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
 766
 767                 if (wcount < blocksize)
 768                         blocksize = wcount;
 769
 770                 retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, address);
 771                 if (retval != ERROR_OK)
 772                         return retval;
 773                 readcount = blocksize;
 774
 775                 do {
 776                         retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
 777                         if (retval != ERROR_OK)
 778                                 return retval;
 779                         retval = dap_run(dap);
 780                         if (retval != ERROR_OK) {
 781                                 LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
 782                                 return retval;
 783                         }
 784
 785                         nbytes = MIN(readcount, 4);
 786
 787                         for (i = 0; i < nbytes; i++) {
 788                                 *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
 789                                 buffer++;
 790                                 address++;
 791                         }
 792
 793                         readcount -= nbytes;
 794                 } while (readcount);
 795                 wcount -= blocksize;
 796         }
 797
 798         return retval;
 799 }
 800
 801 /**
 802  * Synchronously read a block of bytes into a buffer
 803  * @param dap The DAP connected to the MEM-AP.
 804  * @param buffer where the bytes will be stored.
 805  * @param count How many bytes to read.
 806  * @param address Memory address from which to read data; all the
 807  *      data must be readable by the currently selected MEM-AP.
 808  */
 809 int mem_ap_read_buf_u8(struct adiv5_dap *dap, uint8_t *buffer,
 810                 int count, uint32_t address)
 811 {
 812         uint32_t invalue;
 813         int retval = ERROR_OK;
 814
 815         if (count >= 4)
 816                 return mem_ap_read_buf_packed_u8(dap, buffer, count, address);
 817
 818         while (count > 0) {
 819                 retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
 820                 if (retval != ERROR_OK)
 821                         return retval;
 822                 retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
 823                 if (retval != ERROR_OK)
 824                         return retval;
 825                 retval = dap_run(dap);
 826                 if (retval != ERROR_OK)
 827                         break;
 828
 829                 *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
 830                 count--;
 831                 address++;
 832                 buffer++;
 833         }
 834
 835         return retval;
 836 }
 837
 838 /*--------------------------------------------------------------------*/
 839 /*          Wrapping function with selection of AP                    */
 840 /*--------------------------------------------------------------------*/
 841 int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,
 842                 uint32_t address, uint32_t *value)
 843 {
 844         dap_ap_select(swjdp, ap);
 845         return mem_ap_read_u32(swjdp, address, value);
 846 }
 847
 848 int mem_ap_sel_write_u32(struct adiv5_dap *swjdp, uint8_t ap,
 849                 uint32_t address, uint32_t value)
 850 {
 851         dap_ap_select(swjdp, ap);
 852         return mem_ap_write_u32(swjdp, address, value);
 853 }
 854
 855 int mem_ap_sel_read_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
 856                 uint32_t address, uint32_t *value)
 857 {
 858         dap_ap_select(swjdp, ap);
 859         return mem_ap_read_atomic_u32(swjdp, address, value);
 860 }
 861
 862 int mem_ap_sel_write_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
 863                 uint32_t address, uint32_t value)
 864 {
 865         dap_ap_select(swjdp, ap);
 866         return mem_ap_write_atomic_u32(swjdp, address, value);
 867 }
 868
 869 int mem_ap_sel_read_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
 870                 uint8_t *buffer, int count, uint32_t address)
 871 {
 872         dap_ap_select(swjdp, ap);
 873         return mem_ap_read_buf_u8(swjdp, buffer, count, address);
 874 }
 875
 876 int mem_ap_sel_read_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
 877                 uint8_t *buffer, int count, uint32_t address)
 878 {
 879         dap_ap_select(swjdp, ap);
 880         return mem_ap_read_buf_u16(swjdp, buffer, count, address);
 881 }
 882
 883 int mem_ap_sel_read_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
 884                 uint8_t *buffer, int count, uint32_t address)
 885 {
 886         dap_ap_select(swjdp, ap);
 887         return mem_ap_read_buf_u32(swjdp, buffer, count, address);
 888 }
 889
 890 int mem_ap_sel_write_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
 891                 const uint8_t *buffer, int count, uint32_t address)
 892 {
 893         dap_ap_select(swjdp, ap);
 894         return mem_ap_write_buf_u8(swjdp, buffer, count, address);
 895 }
 896
 897 int mem_ap_sel_write_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
 898                 const uint8_t *buffer, int count, uint32_t address)
 899 {
 900         dap_ap_select(swjdp, ap);
 901         return mem_ap_write_buf_u16(swjdp, buffer, count, address);
 902 }
 903
 904 int mem_ap_sel_write_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
 905                 const uint8_t *buffer, int count, uint32_t address)
 906 {
 907         dap_ap_select(swjdp, ap);
 908         return mem_ap_write_buf_u32(swjdp, buffer, count, address);
 909 }
 910
 911 #define MDM_REG_STAT            0x00
 912 #define MDM_REG_CTRL            0x04
 913 #define MDM_REG_ID              0xfc
 914
 915 #define MDM_STAT_FMEACK         (1<<0)
 916 #define MDM_STAT_FREADY         (1<<1)
 917 #define MDM_STAT_SYSSEC         (1<<2)
 918 #define MDM_STAT_SYSRES         (1<<3)
 919 #define MDM_STAT_FMEEN          (1<<5)
 920 #define MDM_STAT_BACKDOOREN     (1<<6)
 921 #define MDM_STAT_LPEN           (1<<7)
 922 #define MDM_STAT_VLPEN          (1<<8)
 923 #define MDM_STAT_LLSMODEXIT     (1<<9)
 924 #define MDM_STAT_VLLSXMODEXIT   (1<<10)
 925 #define MDM_STAT_CORE_HALTED    (1<<16)
 926 #define MDM_STAT_CORE_SLEEPDEEP (1<<17)
 927 #define MDM_STAT_CORESLEEPING   (1<<18)
 928
 929 #define MEM_CTRL_FMEIP          (1<<0)
 930 #define MEM_CTRL_DBG_DIS        (1<<1)
 931 #define MEM_CTRL_DBG_REQ        (1<<2)
 932 #define MEM_CTRL_SYS_RES_REQ    (1<<3)
 933 #define MEM_CTRL_CORE_HOLD_RES  (1<<4)
 934 #define MEM_CTRL_VLLSX_DBG_REQ  (1<<5)
 935 #define MEM_CTRL_VLLSX_DBG_ACK  (1<<6)
 936 #define MEM_CTRL_VLLSX_STAT_ACK (1<<7)
 937
 938 /**
 939  *
 940  */
 941 int dap_syssec_kinetis_mdmap(struct adiv5_dap *dap)
 942 {
 943         uint32_t val;
 944         int retval;
 945         enum reset_types jtag_reset_config = jtag_get_reset_config();
 946
 947         dap_ap_select(dap, 1);
 948
 949         /* first check mdm-ap id register */
 950         retval = dap_queue_ap_read(dap, MDM_REG_ID, &val);
 951         if (retval != ERROR_OK)
 952                 return retval;
 953         dap_run(dap);
 954
 955         if (val != 0x001C0000) {
 956                 LOG_DEBUG("id doesn't match %08X != 0x001C0000", val);
 957                 dap_ap_select(dap, 0);
 958                 return ERROR_FAIL;
 959         }
 960
 961         /* read and parse status register
 962          * it's important that the device is out of
 963          * reset here
 964          */
 965         retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
 966         if (retval != ERROR_OK)
 967                 return retval;
 968         dap_run(dap);
 969
 970         LOG_DEBUG("MDM_REG_STAT %08X", val);
 971
 972         if ((val & (MDM_STAT_SYSSEC|MDM_STAT_FREADY)) != (MDM_STAT_FREADY)) {
 973                 LOG_DEBUG("MDMAP: system is secured, masserase needed");
 974
 975                 if (!(val & MDM_STAT_FMEEN))
 976                         LOG_DEBUG("MDMAP: masserase is disabled");
 977                 else {
 978                         /* we need to assert reset */
 979                         if (jtag_reset_config & RESET_HAS_SRST) {
 980                                 /* default to asserting srst */
 981                                 adapter_assert_reset();
 982                         } else {
 983                                 LOG_DEBUG("SRST not configured");
 984                                 dap_ap_select(dap, 0);
 985                                 return ERROR_FAIL;
 986                         }
 987
 988                         while (1) {
 989                                 retval = dap_queue_ap_write(dap, MDM_REG_CTRL, MEM_CTRL_FMEIP);
 990                                 if (retval != ERROR_OK)
 991                                         return retval;
 992                                 dap_run(dap);
 993                                 /* read status register and wait for ready */
 994                                 retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
 995                                 if (retval != ERROR_OK)
 996                                         return retval;
 997                                 dap_run(dap);
 998                                 LOG_DEBUG("MDM_REG_STAT %08X", val);
 999
1000                                 if ((val & 1))
1001                                         break;
1002                         }
1003
1004                         while (1) {
1005                                 retval = dap_queue_ap_write(dap, MDM_REG_CTRL, 0);
1006                                 if (retval != ERROR_OK)
1007                                         return retval;
1008                                 dap_run(dap);
1009                                 /* read status register */
1010                                 retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
1011                                 if (retval != ERROR_OK)
1012                                         return retval;
1013                                 dap_run(dap);
1014                                 LOG_DEBUG("MDM_REG_STAT %08X", val);
1015                                 /* read control register and wait for ready */
1016                                 retval = dap_queue_ap_read(dap, MDM_REG_CTRL, &val);
1017                                 if (retval != ERROR_OK)
1018                                         return retval;
1019                                 dap_run(dap);
1020                                 LOG_DEBUG("MDM_REG_CTRL %08X", val);
1021
1022                                 if (val == 0x00)
1023                                         break;
1024                         }
1025                 }
1026         }
1027
1028         dap_ap_select(dap, 0);
1029
1030         return ERROR_OK;
1031 }
1032
1033 /** */
1034 struct dap_syssec_filter {
1035         /** */
1036         uint32_t idcode;
1037         /** */
1038         int (*dap_init)(struct adiv5_dap *dap);
1039 };
1040
1041 /** */
1042 static struct dap_syssec_filter dap_syssec_filter_data[] = {
1043         { 0x4BA00477, dap_syssec_kinetis_mdmap }
1044 };
1045
1046 /**
1047  *
1048  */
1049 int dap_syssec(struct adiv5_dap *dap)
1050 {
1051         unsigned int i;
1052         struct jtag_tap *tap;
1053
1054         for (i = 0; i < sizeof(dap_syssec_filter_data); i++) {
1055                 tap = dap->jtag_info->tap;
1056
1057                 while (tap != NULL) {
1058                         if (tap->hasidcode && (dap_syssec_filter_data[i].idcode == tap->idcode)) {
1059                                 LOG_DEBUG("DAP: mdmap_init for idcode: %08x", tap->idcode);
1060                                 dap_syssec_filter_data[i].dap_init(dap);
1061                         }
1062                         tap = tap->next_tap;
1063                 }
1064         }
1065
1066         return ERROR_OK;
1067 }
1068
1069 /*--------------------------------------------------------------------------*/
1070
1071
1072 /* FIXME don't import ... just initialize as
1073  * part of DAP transport setup
1074 */
1075 extern const struct dap_ops jtag_dp_ops;
1076
1077 /*--------------------------------------------------------------------------*/
1078
1079 /**
1080  * Initialize a DAP.  This sets up the power domains, prepares the DP
1081  * for further use, and arranges to use AP #0 for all AP operations
1082  * until dap_ap-select() changes that policy.
1083  *
1084  * @param dap The DAP being initialized.
1085  *
1086  * @todo Rename this.  We also need an initialization scheme which account
1087  * for SWD transports not just JTAG; that will need to address differences
1088  * in layering.  (JTAG is useful without any debug target; but not SWD.)
1089  * And this may not even use an AHB-AP ... e.g. DAP-Lite uses an APB-AP.
1090  */
1091 int ahbap_debugport_init(struct adiv5_dap *dap)
1092 {
1093         uint32_t ctrlstat;
1094         int cnt = 0;
1095         int retval;
1096
1097         LOG_DEBUG(" ");
1098
1099         /* JTAG-DP or SWJ-DP, in JTAG mode
1100          * ... for SWD mode this is patched as part
1101          * of link switchover
1102          */
1103         if (!dap->ops)
1104                 dap->ops = &jtag_dp_ops;
1105
1106         /* Default MEM-AP setup.
1107          *
1108          * REVISIT AP #0 may be an inappropriate default for this.
1109          * Should we probe, or take a hint from the caller?
1110          * Presumably we can ignore the possibility of multiple APs.
1111          */
1112         dap->ap_current = !0;
1113         dap_ap_select(dap, 0);
1114
1115         /* DP initialization */
1116
1117         retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
1118         if (retval != ERROR_OK)
1119                 return retval;
1120
1121         retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
1122         if (retval != ERROR_OK)
1123                 return retval;
1124
1125         retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
1126         if (retval != ERROR_OK)
1127                 return retval;
1128
1129         dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
1130         retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
1131         if (retval != ERROR_OK)
1132                 return retval;
1133
1134         retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
1135         if (retval != ERROR_OK)
1136                 return retval;
1137         retval = dap_run(dap);
1138         if (retval != ERROR_OK)
1139                 return retval;
1140
1141         /* Check that we have debug power domains activated */
1142         while (!(ctrlstat & CDBGPWRUPACK) && (cnt++ < 10)) {
1143                 LOG_DEBUG("DAP: wait CDBGPWRUPACK");
1144                 retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
1145                 if (retval != ERROR_OK)
1146                         return retval;
1147                 retval = dap_run(dap);
1148                 if (retval != ERROR_OK)
1149                         return retval;
1150                 alive_sleep(10);
1151         }
1152
1153         while (!(ctrlstat & CSYSPWRUPACK) && (cnt++ < 10)) {
1154                 LOG_DEBUG("DAP: wait CSYSPWRUPACK");
1155                 retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
1156                 if (retval != ERROR_OK)
1157                         return retval;
1158                 retval = dap_run(dap);
1159                 if (retval != ERROR_OK)
1160                         return retval;
1161                 alive_sleep(10);
1162         }
1163
1164         retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
1165         if (retval != ERROR_OK)
1166                 return retval;
1167         /* With debug power on we can activate OVERRUN checking */
1168         dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
1169         retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
1170         if (retval != ERROR_OK)
1171                 return retval;
1172         retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
1173         if (retval != ERROR_OK)
1174                 return retval;
1175
1176         dap_syssec(dap);
1177
1178         return ERROR_OK;
1179 }
1180
1181 /* CID interpretation -- see ARM IHI 0029B section 3
1182  * and ARM IHI 0031A table 13-3.
1183  */
1184 static const char *class_description[16] = {
1185         "Reserved", "ROM table", "Reserved", "Reserved",
1186         "Reserved", "Reserved", "Reserved", "Reserved",
1187         "Reserved", "CoreSight component", "Reserved", "Peripheral Test Block",
1188         "Reserved", "OptimoDE DESS",
1189         "Generic IP component", "PrimeCell or System component"
1190 };
1191
1192 static bool is_dap_cid_ok(uint32_t cid3, uint32_t cid2, uint32_t cid1, uint32_t cid0)
1193 {
1194         return cid3 == 0xb1 && cid2 == 0x05
1195                         && ((cid1 & 0x0f) == 0) && cid0 == 0x0d;
1196 }
1197
1198 int dap_get_debugbase(struct adiv5_dap *dap, int ap,
1199                         uint32_t *out_dbgbase, uint32_t *out_apid)
1200 {
1201         uint32_t ap_old;
1202         int retval;
1203         uint32_t dbgbase, apid;
1204
1205         /* AP address is in bits 31:24 of DP_SELECT */
1206         if (ap >= 256)
1207                 return ERROR_COMMAND_SYNTAX_ERROR;
1208
1209         ap_old = dap->ap_current;
1210         dap_ap_select(dap, ap);
1211
1212         retval = dap_queue_ap_read(dap, AP_REG_BASE, &dbgbase);
1213         if (retval != ERROR_OK)
1214                 return retval;
1215         retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
1216         if (retval != ERROR_OK)
1217                 return retval;
1218         retval = dap_run(dap);
1219         if (retval != ERROR_OK)
1220                 return retval;
1221
1222         /* Excavate the device ID code */
1223         struct jtag_tap *tap = dap->jtag_info->tap;
1224         while (tap != NULL) {
1225                 if (tap->hasidcode)
1226                         break;
1227                 tap = tap->next_tap;
1228         }
1229         if (tap == NULL || !tap->hasidcode)
1230                 return ERROR_OK;
1231
1232         dap_ap_select(dap, ap_old);
1233
1234         /* The asignment happens only here to prevent modification of these
1235          * values before they are certain. */
1236         *out_dbgbase = dbgbase;
1237         *out_apid = apid;
1238
1239         return ERROR_OK;
1240 }
1241
1242 int dap_lookup_cs_component(struct adiv5_dap *dap, int ap,
1243                         uint32_t dbgbase, uint8_t type, uint32_t *addr)
1244 {
1245         uint32_t ap_old;
1246         uint32_t romentry, entry_offset = 0, component_base, devtype;
1247         int retval = ERROR_FAIL;
1248
1249         if (ap >= 256)
1250                 return ERROR_COMMAND_SYNTAX_ERROR;
1251
1252         ap_old = dap->ap_current;
1253         dap_ap_select(dap, ap);
1254
1255         do {
1256                 retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) |
1257                                                 entry_offset, &romentry);
1258                 if (retval != ERROR_OK)
1259                         return retval;
1260
1261                 component_base = (dbgbase & 0xFFFFF000)
1262                         + (romentry & 0xFFFFF000);
1263
1264                 if (romentry & 0x1) {
1265                         retval = mem_ap_read_atomic_u32(dap,
1266                                         (component_base & 0xfffff000) | 0xfcc,
1267                                         &devtype);
1268                         if ((devtype & 0xff) == type) {
1269                                 *addr = component_base;
1270                                 retval = ERROR_OK;
1271                                 break;
1272                         }
1273                 }
1274                 entry_offset += 4;
1275         } while (romentry > 0);
1276
1277         dap_ap_select(dap, ap_old);
1278
1279         return retval;
1280 }
1281
1282 static int dap_info_command(struct command_context *cmd_ctx,
1283                 struct adiv5_dap *dap, int ap)
1284 {
1285         int retval;
1286         uint32_t dbgbase = 0, apid = 0; /* Silence gcc by initializing */
1287         int romtable_present = 0;
1288         uint8_t mem_ap;
1289         uint32_t ap_old;
1290
1291         retval = dap_get_debugbase(dap, ap, &dbgbase, &apid);
1292         if (retval != ERROR_OK)
1293                 return retval;
1294
1295         ap_old = dap->ap_current;
1296         dap_ap_select(dap, ap);
1297
1298         /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec  */
1299         mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
1300         command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
1301         if (apid) {
1302                 switch (apid&0x0F) {
1303                         case 0:
1304                                 command_print(cmd_ctx, "\tType is JTAG-AP");
1305                                 break;
1306                         case 1:
1307                                 command_print(cmd_ctx, "\tType is MEM-AP AHB");
1308                                 break;
1309                         case 2:
1310                                 command_print(cmd_ctx, "\tType is MEM-AP APB");
1311                                 break;
1312                         default:
1313                                 command_print(cmd_ctx, "\tUnknown AP type");
1314                                 break;
1315                 }
1316
1317                 /* NOTE: a MEM-AP may have a single CoreSight component that's
1318                  * not a ROM table ... or have no such components at all.
1319                  */
1320                 if (mem_ap)
1321                         command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32, dbgbase);
1322         } else
1323                 command_print(cmd_ctx, "No AP found at this ap 0x%x", ap);
1324
1325         romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
1326         if (romtable_present) {
1327                 uint32_t cid0, cid1, cid2, cid3, memtype, romentry;
1328                 uint16_t entry_offset;
1329
1330                 /* bit 16 of apid indicates a memory access port */
1331                 if (dbgbase & 0x02)
1332                         command_print(cmd_ctx, "\tValid ROM table present");
1333                 else
1334                         command_print(cmd_ctx, "\tROM table in legacy format");
1335
1336                 /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec  */
1337                 retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
1338                 if (retval != ERROR_OK)
1339                         return retval;
1340                 retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
1341                 if (retval != ERROR_OK)
1342                         return retval;
1343                 retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
1344                 if (retval != ERROR_OK)
1345                         return retval;
1346                 retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
1347                 if (retval != ERROR_OK)
1348                         return retval;
1349                 retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
1350                 if (retval != ERROR_OK)
1351                         return retval;
1352                 retval = dap_run(dap);
1353                 if (retval != ERROR_OK)
1354                         return retval;
1355
1356                 if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
1357                         command_print(cmd_ctx, "\tCID3 0x%2.2x"
1358                                         ", CID2 0x%2.2x"
1359                                         ", CID1 0x%2.2x"
1360                                         ", CID0 0x%2.2x",
1361                                         (unsigned) cid3, (unsigned)cid2,
1362                                         (unsigned) cid1, (unsigned) cid0);
1363                 if (memtype & 0x01)
1364                         command_print(cmd_ctx, "\tMEMTYPE system memory present on bus");
1365                 else
1366                         command_print(cmd_ctx, "\tMEMTYPE System memory not present. "
1367                                         "Dedicated debug bus.");
1368
1369                 /* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
1370                 entry_offset = 0;
1371                 do {
1372                         retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
1373                         if (retval != ERROR_OK)
1374                                 return retval;
1375                         command_print(cmd_ctx, "\tROMTABLE[0x%x] = 0x%" PRIx32 "", entry_offset, romentry);
1376                         if (romentry & 0x01) {
1377                                 uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
1378                                 uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
1379                                 uint32_t component_base;
1380                                 unsigned part_num;
1381                                 char *type, *full;
1382
1383                                 component_base = (dbgbase & 0xFFFFF000) + (romentry & 0xFFFFF000);
1384
1385                                 /* IDs are in last 4K section */
1386                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE0, &c_pid0);
1387                                 if (retval != ERROR_OK)
1388                                         return retval;
1389                                 c_pid0 &= 0xff;
1390                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE4, &c_pid1);
1391                                 if (retval != ERROR_OK)
1392                                         return retval;
1393                                 c_pid1 &= 0xff;
1394                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE8, &c_pid2);
1395                                 if (retval != ERROR_OK)
1396                                         return retval;
1397                                 c_pid2 &= 0xff;
1398                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFEC, &c_pid3);
1399                                 if (retval != ERROR_OK)
1400                                         return retval;
1401                                 c_pid3 &= 0xff;
1402                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFD0, &c_pid4);
1403                                 if (retval != ERROR_OK)
1404                                         return retval;
1405                                 c_pid4 &= 0xff;
1406
1407                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF0, &c_cid0);
1408                                 if (retval != ERROR_OK)
1409                                         return retval;
1410                                 c_cid0 &= 0xff;
1411                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF4, &c_cid1);
1412                                 if (retval != ERROR_OK)
1413                                         return retval;
1414                                 c_cid1 &= 0xff;
1415                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF8, &c_cid2);
1416                                 if (retval != ERROR_OK)
1417                                         return retval;
1418                                 c_cid2 &= 0xff;
1419                                 retval = mem_ap_read_atomic_u32(dap, component_base + 0xFFC, &c_cid3);
1420                                 if (retval != ERROR_OK)
1421                                         return retval;
1422                                 c_cid3 &= 0xff;
1423
1424                                 command_print(cmd_ctx, "\t\tComponent base address 0x%" PRIx32 ","
1425                                                 "start address 0x%" PRIx32, component_base,
1426                                 /* component may take multiple 4K pages */
1427                                 component_base - 0x1000*(c_pid4 >> 4));
1428                                 command_print(cmd_ctx, "\t\tComponent class is 0x%x, %s",
1429                                                 (int) (c_cid1 >> 4) & 0xf,
1430                                                 /* See ARM IHI 0029B Table 3-3 */
1431                                                 class_description[(c_cid1 >> 4) & 0xf]);
1432
1433                                 /* CoreSight component? */
1434                                 if (((c_cid1 >> 4) & 0x0f) == 9) {
1435                                         uint32_t devtype;
1436                                         unsigned minor;
1437                                         char *major = "Reserved", *subtype = "Reserved";
1438
1439                                         retval = mem_ap_read_atomic_u32(dap,
1440                                                         (component_base & 0xfffff000) | 0xfcc,
1441                                                         &devtype);
1442                                         if (retval != ERROR_OK)
1443                                                 return retval;
1444                                         minor = (devtype >> 4) & 0x0f;
1445                                         switch (devtype & 0x0f) {
1446                                         case 0:
1447                                                 major = "Miscellaneous";
1448                                                 switch (minor) {
1449                                                 case 0:
1450                                                         subtype = "other";
1451                                                         break;
1452                                                 case 4:
1453                                                         subtype = "Validation component";
1454                                                         break;
1455                                                 }
1456                                                 break;
1457                                         case 1:
1458                                                 major = "Trace Sink";
1459                                                 switch (minor) {
1460                                                 case 0:
1461                                                         subtype = "other";
1462                                                         break;
1463                                                 case 1:
1464                                                         subtype = "Port";
1465                                                         break;
1466                                                 case 2:
1467                                                         subtype = "Buffer";
1468                                                         break;
1469                                                 }
1470                                                 break;
1471                                         case 2:
1472                                                 major = "Trace Link";
1473                                                 switch (minor) {
1474                                                 case 0:
1475                                                         subtype = "other";
1476                                                         break;
1477                                                 case 1:
1478                                                         subtype = "Funnel, router";
1479                                                         break;
1480                                                 case 2:
1481                                                         subtype = "Filter";
1482                                                         break;
1483                                                 case 3:
1484                                                         subtype = "FIFO, buffer";
1485                                                         break;
1486                                                 }
1487                                                 break;
1488                                         case 3:
1489                                                 major = "Trace Source";
1490                                                 switch (minor) {
1491                                                 case 0:
1492                                                         subtype = "other";
1493                                                         break;
1494                                                 case 1:
1495                                                         subtype = "Processor";
1496                                                         break;
1497                                                 case 2:
1498                                                         subtype = "DSP";
1499                                                         break;
1500                                                 case 3:
1501                                                         subtype = "Engine/Coprocessor";
1502                                                         break;
1503                                                 case 4:
1504                                                         subtype = "Bus";
1505                                                         break;
1506                                                 }
1507                                                 break;
1508                                         case 4:
1509                                                 major = "Debug Control";
1510                                                 switch (minor) {
1511                                                 case 0:
1512                                                         subtype = "other";
1513                                                         break;
1514                                                 case 1:
1515                                                         subtype = "Trigger Matrix";
1516                                                         break;
1517                                                 case 2:
1518                                                         subtype = "Debug Auth";
1519                                                         break;
1520                                                 }
1521                                                 break;
1522                                         case 5:
1523                                                 major = "Debug Logic";
1524                                                 switch (minor) {
1525                                                 case 0:
1526                                                         subtype = "other";
1527                                                         break;
1528                                                 case 1:
1529                                                         subtype = "Processor";
1530                                                         break;
1531                                                 case 2:
1532                                                         subtype = "DSP";
1533                                                         break;
1534                                                 case 3:
1535                                                         subtype = "Engine/Coprocessor";
1536                                                         break;
1537                                                 }
1538                                                 break;
1539                                         }
1540                                         command_print(cmd_ctx, "\t\tType is 0x%2.2x, %s, %s",
1541                                                         (unsigned) (devtype & 0xff),
1542                                                         major, subtype);
1543                                         /* REVISIT also show 0xfc8 DevId */
1544                                 }
1545
1546                                 if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
1547                                         command_print(cmd_ctx,
1548                                                         "\t\tCID3 0%2.2x"
1549                                                         ", CID2 0%2.2x"
1550                                                         ", CID1 0%2.2x"
1551                                                         ", CID0 0%2.2x",
1552                                                         (int) c_cid3,
1553                                                         (int) c_cid2,
1554                                                         (int)c_cid1,
1555                                                         (int)c_cid0);
1556                                 command_print(cmd_ctx,
1557                                 "\t\tPeripheral ID[4..0] = hex "
1558                                 "%2.2x %2.2x %2.2x %2.2x %2.2x",
1559                                 (int) c_pid4, (int) c_pid3, (int) c_pid2,
1560                                 (int) c_pid1, (int) c_pid0);
1561
1562                                 /* Part number interpretations are from Cortex
1563                                  * core specs, the CoreSight components TRM
1564                                  * (ARM DDI 0314H), CoreSight System Design
1565                                  * Guide (ARM DGI 0012D) and ETM specs; also
1566                                  * from chip observation (e.g. TI SDTI).
1567                                  */
1568                                 part_num = (c_pid0 & 0xff);
1569                                 part_num |= (c_pid1 & 0x0f) << 8;
1570                                 switch (part_num) {
1571                                 case 0x000:
1572                                         type = "Cortex-M3 NVIC";
1573                                         full = "(Interrupt Controller)";
1574                                         break;
1575                                 case 0x001:
1576                                         type = "Cortex-M3 ITM";
1577                                         full = "(Instrumentation Trace Module)";
1578                                         break;
1579                                 case 0x002:
1580                                         type = "Cortex-M3 DWT";
1581                                         full = "(Data Watchpoint and Trace)";
1582                                         break;
1583                                 case 0x003:
1584                                         type = "Cortex-M3 FBP";
1585                                         full = "(Flash Patch and Breakpoint)";
1586                                         break;
1587                                 case 0x00d:
1588                                         type = "CoreSight ETM11";
1589                                         full = "(Embedded Trace)";
1590                                         break;
1591                                 /* case 0x113: what? */
1592                                 case 0x120:             /* from OMAP3 memmap */
1593                                         type = "TI SDTI";
1594                                         full = "(System Debug Trace Interface)";
1595                                         break;
1596                                 case 0x343:             /* from OMAP3 memmap */
1597                                         type = "TI DAPCTL";
1598                                         full = "";
1599                                         break;
1600                                 case 0x906:
1601                                         type = "Coresight CTI";
1602                                         full = "(Cross Trigger)";
1603                                         break;
1604                                 case 0x907:
1605                                         type = "Coresight ETB";
1606                                         full = "(Trace Buffer)";
1607                                         break;
1608                                 case 0x908:
1609                                         type = "Coresight CSTF";
1610                                         full = "(Trace Funnel)";
1611                                         break;
1612                                 case 0x910:
1613                                         type = "CoreSight ETM9";
1614                                         full = "(Embedded Trace)";
1615                                         break;
1616                                 case 0x912:
1617                                         type = "Coresight TPIU";
1618                                         full = "(Trace Port Interface Unit)";
1619                                         break;
1620                                 case 0x921:
1621                                         type = "Cortex-A8 ETM";
1622                                         full = "(Embedded Trace)";
1623                                         break;
1624                                 case 0x922:
1625                                         type = "Cortex-A8 CTI";
1626                                         full = "(Cross Trigger)";
1627                                         break;
1628                                 case 0x923:
1629                                         type = "Cortex-M3 TPIU";
1630                                         full = "(Trace Port Interface Unit)";
1631                                         break;
1632                                 case 0x924:
1633                                         type = "Cortex-M3 ETM";
1634                                         full = "(Embedded Trace)";
1635                                         break;
1636                                 case 0x930:
1637                                         type = "Cortex-R4 ETM";
1638                                         full = "(Embedded Trace)";
1639                                         break;
1640                                 case 0xc08:
1641                                         type = "Cortex-A8 Debug";
1642                                         full = "(Debug Unit)";
1643                                         break;
1644                                 default:
1645                                         type = "-*- unrecognized -*-";
1646                                         full = "";
1647                                         break;
1648                                 }
1649                                 command_print(cmd_ctx, "\t\tPart is %s %s",
1650                                                 type, full);
1651                         } else {
1652                                 if (romentry)
1653                                         command_print(cmd_ctx, "\t\tComponent not present");
1654                                 else
1655                                         command_print(cmd_ctx, "\t\tEnd of ROM table");
1656                         }
1657                         entry_offset += 4;
1658                 } while (romentry > 0);
1659         } else
1660                 command_print(cmd_ctx, "\tNo ROM table present");
1661         dap_ap_select(dap, ap_old);
1662
1663         return ERROR_OK;
1664 }
1665
1666 COMMAND_HANDLER(handle_dap_info_command)
1667 {
1668         struct target *target = get_current_target(CMD_CTX);
1669         struct arm *arm = target_to_arm(target);
1670         struct adiv5_dap *dap = arm->dap;
1671         uint32_t apsel;
1672
1673         switch (CMD_ARGC) {
1674         case 0:
1675                 apsel = dap->apsel;
1676                 break;
1677         case 1:
1678                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
1679                 break;
1680         default:
1681                 return ERROR_COMMAND_SYNTAX_ERROR;
1682         }
1683
1684         return dap_info_command(CMD_CTX, dap, apsel);
1685 }
1686
1687 COMMAND_HANDLER(dap_baseaddr_command)
1688 {
1689         struct target *target = get_current_target(CMD_CTX);
1690         struct arm *arm = target_to_arm(target);
1691         struct adiv5_dap *dap = arm->dap;
1692
1693         uint32_t apsel, baseaddr;
1694         int retval;
1695
1696         switch (CMD_ARGC) {
1697         case 0:
1698                 apsel = dap->apsel;
1699                 break;
1700         case 1:
1701                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
1702                 /* AP address is in bits 31:24 of DP_SELECT */
1703                 if (apsel >= 256)
1704                         return ERROR_COMMAND_SYNTAX_ERROR;
1705                 break;
1706         default:
1707                 return ERROR_COMMAND_SYNTAX_ERROR;
1708         }
1709
1710         dap_ap_select(dap, apsel);
1711
1712         /* NOTE:  assumes we're talking to a MEM-AP, which
1713          * has a base address.  There are other kinds of AP,
1714          * though they're not common for now.  This should
1715          * use the ID register to verify it's a MEM-AP.
1716          */
1717         retval = dap_queue_ap_read(dap, AP_REG_BASE, &baseaddr);
1718         if (retval != ERROR_OK)
1719                 return retval;
1720         retval = dap_run(dap);
1721         if (retval != ERROR_OK)
1722                 return retval;
1723
1724         command_print(CMD_CTX, "0x%8.8" PRIx32, baseaddr);
1725
1726         return retval;
1727 }
1728
1729 COMMAND_HANDLER(dap_memaccess_command)
1730 {
1731         struct target *target = get_current_target(CMD_CTX);
1732         struct arm *arm = target_to_arm(target);
1733         struct adiv5_dap *dap = arm->dap;
1734
1735         uint32_t memaccess_tck;
1736
1737         switch (CMD_ARGC) {
1738         case 0:
1739                 memaccess_tck = dap->memaccess_tck;
1740                 break;
1741         case 1:
1742                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], memaccess_tck);
1743                 break;
1744         default:
1745                 return ERROR_COMMAND_SYNTAX_ERROR;
1746         }
1747         dap->memaccess_tck = memaccess_tck;
1748
1749         command_print(CMD_CTX, "memory bus access delay set to %" PRIi32 " tck",
1750                         dap->memaccess_tck);
1751
1752         return ERROR_OK;
1753 }
1754
1755 COMMAND_HANDLER(dap_apsel_command)
1756 {
1757         struct target *target = get_current_target(CMD_CTX);
1758         struct arm *arm = target_to_arm(target);
1759         struct adiv5_dap *dap = arm->dap;
1760
1761         uint32_t apsel, apid;
1762         int retval;
1763
1764         switch (CMD_ARGC) {
1765         case 0:
1766                 apsel = 0;
1767                 break;
1768         case 1:
1769                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
1770                 /* AP address is in bits 31:24 of DP_SELECT */
1771                 if (apsel >= 256)
1772                         return ERROR_COMMAND_SYNTAX_ERROR;
1773                 break;
1774         default:
1775                 return ERROR_COMMAND_SYNTAX_ERROR;
1776         }
1777
1778         dap->apsel = apsel;
1779         dap_ap_select(dap, apsel);
1780
1781         retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
1782         if (retval != ERROR_OK)
1783                 return retval;
1784         retval = dap_run(dap);
1785         if (retval != ERROR_OK)
1786                 return retval;
1787
1788         command_print(CMD_CTX, "ap %" PRIi32 " selected, identification register 0x%8.8" PRIx32,
1789                         apsel, apid);
1790
1791         return retval;
1792 }
1793
1794 COMMAND_HANDLER(dap_apid_command)
1795 {
1796         struct target *target = get_current_target(CMD_CTX);
1797         struct arm *arm = target_to_arm(target);
1798         struct adiv5_dap *dap = arm->dap;
1799
1800         uint32_t apsel, apid;
1801         int retval;
1802
1803         switch (CMD_ARGC) {
1804         case 0:
1805                 apsel = dap->apsel;
1806                 break;
1807         case 1:
1808                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
1809                 /* AP address is in bits 31:24 of DP_SELECT */
1810                 if (apsel >= 256)
1811                         return ERROR_COMMAND_SYNTAX_ERROR;
1812                 break;
1813         default:
1814                 return ERROR_COMMAND_SYNTAX_ERROR;
1815         }
1816
1817         dap_ap_select(dap, apsel);
1818
1819         retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
1820         if (retval != ERROR_OK)
1821                 return retval;
1822         retval = dap_run(dap);
1823         if (retval != ERROR_OK)
1824                 return retval;
1825
1826         command_print(CMD_CTX, "0x%8.8" PRIx32, apid);
1827
1828         return retval;
1829 }
1830
1831 static const struct command_registration dap_commands[] = {
1832         {
1833                 .name = "info",
1834                 .handler = handle_dap_info_command,
1835                 .mode = COMMAND_EXEC,
1836                 .help = "display ROM table for MEM-AP "
1837                         "(default currently selected AP)",
1838                 .usage = "[ap_num]",
1839         },
1840         {
1841                 .name = "apsel",
1842                 .handler = dap_apsel_command,
1843                 .mode = COMMAND_EXEC,
1844                 .help = "Set the currently selected AP (default 0) "
1845                         "and display the result",
1846                 .usage = "[ap_num]",
1847         },
1848         {
1849                 .name = "apid",
1850                 .handler = dap_apid_command,
1851                 .mode = COMMAND_EXEC,
1852                 .help = "return ID register from AP "
1853                         "(default currently selected AP)",
1854                 .usage = "[ap_num]",
1855         },
1856         {
1857                 .name = "baseaddr",
1858                 .handler = dap_baseaddr_command,
1859                 .mode = COMMAND_EXEC,
1860                 .help = "return debug base address from MEM-AP "
1861                         "(default currently selected AP)",
1862                 .usage = "[ap_num]",
1863         },
1864         {
1865                 .name = "memaccess",
1866                 .handler = dap_memaccess_command,
1867                 .mode = COMMAND_EXEC,
1868                 .help = "set/get number of extra tck for MEM-AP memory "
1869                         "bus access [0-255]",
1870                 .usage = "[cycles]",
1871         },
1872         COMMAND_REGISTRATION_DONE
1873 };
1874
1875 const struct command_registration dap_command_handlers[] = {
1876         {
1877                 .name = "dap",
1878                 .mode = COMMAND_EXEC,
1879                 .help = "DAP command group",
1880                 .usage = "",
1881                 .chain = dap_commands,
1882         },
1883         COMMAND_REGISTRATION_DONE
1884 };