1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * Copyright (C) 2011 by Clement Burin des Roziers *
9 * clement.burin-des-roziers@hikob.com *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
32 #include <helper/binarybuffer.h>
33 #include <target/algorithm.h>
34 #include <target/armv7m.h>
36 /* stm32lx flash register locations */
38 #define FLASH_BASE 0x40023C00
39 #define FLASH_ACR 0x40023C00
40 #define FLASH_PECR 0x40023C04
41 #define FLASH_PDKEYR 0x40023C08
42 #define FLASH_PEKEYR 0x40023C0C
43 #define FLASH_PRGKEYR 0x40023C10
44 #define FLASH_OPTKEYR 0x40023C14
45 #define FLASH_SR 0x40023C18
46 #define FLASH_OBR 0x40023C1C
47 #define FLASH_WRPR 0x40023C20
50 #define FLASH_ACR__LATENCY (1<<0)
51 #define FLASH_ACR__PRFTEN (1<<1)
52 #define FLASH_ACR__ACC64 (1<<2)
53 #define FLASH_ACR__SLEEP_PD (1<<3)
54 #define FLASH_ACR__RUN_PD (1<<4)
57 #define FLASH_PECR__PELOCK (1<<0)
58 #define FLASH_PECR__PRGLOCK (1<<1)
59 #define FLASH_PECR__OPTLOCK (1<<2)
60 #define FLASH_PECR__PROG (1<<3)
61 #define FLASH_PECR__DATA (1<<4)
62 #define FLASH_PECR__FTDW (1<<8)
63 #define FLASH_PECR__ERASE (1<<9)
64 #define FLASH_PECR__FPRG (1<<10)
65 #define FLASH_PECR__EOPIE (1<<16)
66 #define FLASH_PECR__ERRIE (1<<17)
67 #define FLASH_PECR__OBL_LAUNCH (1<<18)
70 #define FLASH_SR__BSY (1<<0)
71 #define FLASH_SR__EOP (1<<1)
72 #define FLASH_SR__ENDHV (1<<2)
73 #define FLASH_SR__READY (1<<3)
74 #define FLASH_SR__WRPERR (1<<8)
75 #define FLASH_SR__PGAERR (1<<9)
76 #define FLASH_SR__SIZERR (1<<10)
77 #define FLASH_SR__OPTVERR (1<<11)
80 #define PEKEY1 0x89ABCDEF
81 #define PEKEY2 0x02030405
82 #define PRGKEY1 0x8C9DAEBF
83 #define PRGKEY2 0x13141516
84 #define OPTKEY1 0xFBEAD9C8
85 #define OPTKEY2 0x24252627
88 #define DBGMCU_IDCODE 0xE0042000
89 #define F_SIZE 0x1FF8004C
92 #define FLASH_PAGE_SIZE 256
93 #define FLASH_SECTOR_SIZE 4096
94 #define FLASH_PAGES_PER_SECTOR 16
95 #define FLASH_BANK0_ADDRESS 0x08000000
97 /* stm32lx option byte register location */
98 #define OB_RDP 0x1FF80000
99 #define OB_USER 0x1FF80004
100 #define OB_WRP0_1 0x1FF80008
101 #define OB_WRP2_3 0x1FF8000C
104 #define OB_RDP__LEVEL0 0xFF5500AA
105 #define OB_RDP__LEVEL1 0xFFFF0000
107 /* stm32lx RCC register locations */
108 #define RCC_CR 0x40023800
109 #define RCC_ICSCR 0x40023804
110 #define RCC_CFGR 0x40023808
113 #define RCC_ICSCR__MSIRANGE_MASK (7<<13)
115 static int stm32lx_unlock_program_memory(struct flash_bank *bank);
116 static int stm32lx_lock_program_memory(struct flash_bank *bank);
117 static int stm32lx_enable_write_half_page(struct flash_bank *bank);
118 static int stm32lx_erase_sector(struct flash_bank *bank, int sector);
119 static int stm32lx_wait_until_bsy_clear(struct flash_bank *bank);
121 struct stm32lx_flash_bank {
125 /* flash bank stm32lx <base> <size> 0 0 <target#>
127 FLASH_BANK_COMMAND_HANDLER(stm32lx_flash_bank_command)
129 struct stm32lx_flash_bank *stm32lx_info;
131 return ERROR_COMMAND_SYNTAX_ERROR;
133 /* Create the bank structure */
134 stm32lx_info = malloc(sizeof(struct stm32lx_flash_bank));
136 /* Check allocation */
137 if (stm32lx_info == NULL) {
138 LOG_ERROR("failed to allocate bank structure");
142 bank->driver_priv = stm32lx_info;
144 stm32lx_info->probed = 0;
149 static int stm32lx_protect_check(struct flash_bank *bank)
152 struct target *target = bank->target;
156 if (target->state != TARGET_HALTED) {
157 LOG_ERROR("Target not halted");
158 return ERROR_TARGET_NOT_HALTED;
162 * Read the WRPR word, and check each bit (corresponding to each
165 retval = target_read_u32(target, FLASH_WRPR, &wrpr);
166 if (retval != ERROR_OK)
169 for (int i = 0; i < 32; i++) {
171 bank->sectors[i].is_protected = 1;
173 bank->sectors[i].is_protected = 0;
178 static int stm32lx_erase(struct flash_bank *bank, int first, int last)
183 * It could be possible to do a mass erase if all sectors must be
184 * erased, but it is not implemented yet.
187 if (bank->target->state != TARGET_HALTED) {
188 LOG_ERROR("Target not halted");
189 return ERROR_TARGET_NOT_HALTED;
193 * Loop over the selected sectors and erase them
195 for (int i = first; i <= last; i++) {
196 retval = stm32lx_erase_sector(bank, i);
197 if (retval != ERROR_OK)
199 bank->sectors[i].is_erased = 1;
204 static int stm32lx_protect(struct flash_bank *bank, int set, int first,
207 LOG_WARNING("protection of the STM32L flash is not implemented");
211 static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer,
212 uint32_t offset, uint32_t count)
214 struct target *target = bank->target;
215 uint32_t buffer_size = 4096 * 4;
216 struct working_area *write_algorithm;
217 struct working_area *source;
218 uint32_t address = bank->base + offset;
220 struct reg_param reg_params[5];
221 struct armv7m_algorithm armv7m_info;
223 int retval = ERROR_OK;
226 /* see contib/loaders/flash/stm32lx.s for src */
228 static const uint16_t stm32lx_flash_write_code_16[] = {
229 /* 00000000 <write_word-0x4>: */
230 0x2300, /* 0: 2300 movs r3, #0 */
231 0xe004, /* 2: e004 b.n e <test_done> */
233 /* 00000004 <write_word>: */
234 0xf851, 0xcb04, /* 4: f851 cb04 ldr.w ip, [r1], #4 */
235 0xf840, 0xcb04, /* 8: f840 cb04 str.w ip, [r0], #4 */
236 0x3301, /* c: 3301 adds r3, #1 */
238 /* 0000000e <test_done>: */
239 0x4293, /* e: 4293 cmp r3, r2 */
240 0xd3f8, /* 10: d3f8 bcc.n 4 <write_word> */
241 0xbe00, /* 12: be00 bkpt 0x0000 */
246 uint8_t stm32lx_flash_write_code[sizeof(stm32lx_flash_write_code_16)];
247 for (unsigned int i = 0; i < sizeof(stm32lx_flash_write_code_16) / 2; i++) {
248 stm32lx_flash_write_code[i * 2 + 0] = stm32lx_flash_write_code_16[i]
250 stm32lx_flash_write_code[i * 2 + 1] = (stm32lx_flash_write_code_16[i]
253 /* Check if there is an even number of half pages (128bytes) */
255 LOG_ERROR("there should be an even number "
256 "of half pages = 128 bytes (count = %" PRIi32 " bytes)", count);
260 /* Allocate working area */
261 reg32 = sizeof(stm32lx_flash_write_code);
262 /* Add bytes to make 4byte aligned */
263 reg32 += (4 - (reg32 % 4)) % 4;
264 retval = target_alloc_working_area(target, reg32,
266 if (retval != ERROR_OK)
269 /* Write the flashing code */
270 retval = target_write_buffer(target,
271 write_algorithm->address,
272 sizeof(stm32lx_flash_write_code),
273 (uint8_t *)stm32lx_flash_write_code);
274 if (retval != ERROR_OK) {
275 target_free_working_area(target, write_algorithm);
279 /* Allocate half pages memory */
280 while (target_alloc_working_area_try(target, buffer_size, &source)
282 if (buffer_size > 1024)
287 if (buffer_size <= 256) {
288 /* we already allocated the writing code, but failed to get a
289 * buffer, free the algorithm */
290 target_free_working_area(target, write_algorithm);
292 LOG_WARNING("no large enough working area available, can't do block memory writes");
293 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
296 LOG_DEBUG("allocated working area for data (%" PRIx32 " bytes)", buffer_size);
298 armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
299 armv7m_info.core_mode = ARMV7M_MODE_ANY;
300 init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
301 init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
302 init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
303 init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT);
304 init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
306 /* Enable half-page write */
307 retval = stm32lx_enable_write_half_page(bank);
308 if (retval != ERROR_OK) {
309 target_free_working_area(target, source);
310 target_free_working_area(target, write_algorithm);
312 destroy_reg_param(®_params[0]);
313 destroy_reg_param(®_params[1]);
314 destroy_reg_param(®_params[2]);
315 destroy_reg_param(®_params[3]);
319 /* Loop while there are bytes to write */
322 this_count = (count > buffer_size) ? buffer_size : count;
324 /* Write the next half pages */
325 retval = target_write_buffer(target, source->address, this_count,
327 if (retval != ERROR_OK)
330 /* 4: Store useful information in the registers */
331 /* the destination address of the copy (R0) */
332 buf_set_u32(reg_params[0].value, 0, 32, address);
333 /* The source address of the copy (R1) */
334 buf_set_u32(reg_params[1].value, 0, 32, source->address);
335 /* The length of the copy (R2) */
336 buf_set_u32(reg_params[2].value, 0, 32, this_count / 4);
338 /* 5: Execute the bunch of code */
339 retval = target_run_algorithm(target, 0, NULL, sizeof(reg_params)
340 / sizeof(*reg_params), reg_params,
341 write_algorithm->address, 0, 20000, &armv7m_info);
342 if (retval != ERROR_OK)
345 /* 6: Wait while busy */
346 retval = stm32lx_wait_until_bsy_clear(bank);
347 if (retval != ERROR_OK)
350 buffer += this_count;
351 address += this_count;
355 if (retval == ERROR_OK)
356 retval = stm32lx_lock_program_memory(bank);
358 target_free_working_area(target, source);
359 target_free_working_area(target, write_algorithm);
361 destroy_reg_param(®_params[0]);
362 destroy_reg_param(®_params[1]);
363 destroy_reg_param(®_params[2]);
364 destroy_reg_param(®_params[3]);
368 static int stm32lx_write(struct flash_bank *bank, uint8_t *buffer,
369 uint32_t offset, uint32_t count)
371 struct target *target = bank->target;
373 uint32_t halfpages_number;
374 uint32_t words_remaining;
375 uint32_t bytes_remaining;
376 uint32_t address = bank->base + offset;
377 uint32_t bytes_written = 0;
380 uint8_t *start = buffer;
381 uint32_t start_address = address;
382 uint32_t start_count = count;
386 if (bank->target->state != TARGET_HALTED) {
387 LOG_ERROR("Target not halted");
388 return ERROR_TARGET_NOT_HALTED;
392 LOG_ERROR("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
393 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
396 /* Check if there are some full half pages */
397 if (((offset % 128) == 0) && (count >= 128)) {
398 halfpages_number = count / 128;
399 words_remaining = (count - 128 * halfpages_number) / 4;
400 bytes_remaining = (count & 0x3);
402 halfpages_number = 0;
403 words_remaining = (count / 4);
404 bytes_remaining = (count & 0x3);
407 if (halfpages_number) {
408 retval = stm32lx_write_half_pages(bank, buffer, offset, 128
410 if (retval != ERROR_OK)
414 bytes_written = 128 * halfpages_number;
415 address += bytes_written;
417 retval = stm32lx_unlock_program_memory(bank);
418 if (retval != ERROR_OK)
421 while (words_remaining > 0) {
423 uint8_t *p = buffer + bytes_written;
425 /* Prepare the word, Little endian conversion */
426 value = p[0] + (p[1] << 8) + (p[2] << 16) + (p[3] << 24);
428 retval = target_write_u32(target, address, value);
429 if (retval != ERROR_OK)
436 retval = stm32lx_wait_until_bsy_clear(bank);
437 if (retval != ERROR_OK)
441 if (bytes_remaining) {
442 uint8_t last_word[4] = {0xff, 0xff, 0xff, 0xff};
444 /* copy the last remaining bytes into the write buffer */
445 memcpy(last_word, buffer+bytes_written, bytes_remaining);
447 retval = target_write_buffer(target, address, 4, last_word);
448 if (retval != ERROR_OK)
451 retval = stm32lx_wait_until_bsy_clear(bank);
452 if (retval != ERROR_OK)
456 retval = stm32lx_lock_program_memory(bank);
457 if (retval != ERROR_OK)
460 validate = malloc (start_count);
462 retval = target_read_buffer(target, start_address, start_count, validate);
463 if (retval != ERROR_OK) {
468 for (check = 0; check < start_count; check++) {
469 if (validate[check] != start[check]) {
470 LOG_ERROR ("flash corrupted at 0x%08x (%02x != %02x)\n",
471 start_address + check, start[check], validate[check]);
482 static int stm32lx_probe(struct flash_bank *bank)
484 struct target *target = bank->target;
485 struct stm32lx_flash_bank *stm32lx_info = bank->driver_priv;
487 uint16_t flash_size_in_kb;
488 uint16_t max_flash_size_in_kb;
491 stm32lx_info->probed = 0;
493 /* read stm32 device id register */
494 int retval = target_read_u32(target, DBGMCU_IDCODE, &device_id);
495 if (retval != ERROR_OK)
498 LOG_DEBUG("device id = 0x%08" PRIx32 "", device_id);
500 /* set max flash size depending on family */
501 switch (device_id & 0xfff) {
503 max_flash_size_in_kb = 128;
506 max_flash_size_in_kb = 384;
509 LOG_WARNING("Cannot identify target as a STM32L family.");
513 /* get flash size from target. */
514 retval = target_read_u16(target, F_SIZE, &flash_size_in_kb);
516 /* failed reading flash size or flash size invalid (early silicon),
517 * default to max target family */
518 if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
519 LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
520 max_flash_size_in_kb);
521 flash_size_in_kb = max_flash_size_in_kb;
524 /* STM32L - we have 32 sectors, 16 pages per sector -> 512 pages
525 * 16 pages for a protection area */
527 /* calculate numbers of sectors (4kB per sector) */
528 int num_sectors = (flash_size_in_kb * 1024) / FLASH_SECTOR_SIZE;
529 LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
533 bank->sectors = NULL;
536 bank->base = FLASH_BANK0_ADDRESS;
537 bank->size = flash_size_in_kb * 1024;
538 bank->num_sectors = num_sectors;
539 bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
540 if (bank->sectors == NULL) {
541 LOG_ERROR("failed to allocate bank sectors");
545 for (i = 0; i < num_sectors; i++) {
546 bank->sectors[i].offset = i * FLASH_SECTOR_SIZE;
547 bank->sectors[i].size = FLASH_SECTOR_SIZE;
548 bank->sectors[i].is_erased = -1;
549 bank->sectors[i].is_protected = 1;
552 stm32lx_info->probed = 1;
557 static int stm32lx_auto_probe(struct flash_bank *bank)
559 struct stm32lx_flash_bank *stm32lx_info = bank->driver_priv;
561 if (stm32lx_info->probed)
564 return stm32lx_probe(bank);
567 static int stm32lx_erase_check(struct flash_bank *bank)
569 struct target *target = bank->target;
570 const int buffer_size = 4096;
573 int retval = ERROR_OK;
575 if (bank->target->state != TARGET_HALTED) {
576 LOG_ERROR("Target not halted");
577 return ERROR_TARGET_NOT_HALTED;
580 uint8_t *buffer = malloc(buffer_size);
581 if (buffer == NULL) {
582 LOG_ERROR("failed to allocate read buffer");
586 for (i = 0; i < bank->num_sectors; i++) {
588 bank->sectors[i].is_erased = 1;
590 /* Loop chunk by chunk over the sector */
591 for (j = 0; j < bank->sectors[i].size; j += buffer_size) {
594 if (chunk > (j - bank->sectors[i].size))
595 chunk = (j - bank->sectors[i].size);
597 retval = target_read_memory(target, bank->base
598 + bank->sectors[i].offset + j, 4, chunk / 4, buffer);
599 if (retval != ERROR_OK)
602 for (nBytes = 0; nBytes < chunk; nBytes++) {
603 if (buffer[nBytes] != 0x00) {
604 bank->sectors[i].is_erased = 0;
609 if (retval != ERROR_OK)
617 static int stm32lx_get_info(struct flash_bank *bank, char *buf, int buf_size)
619 /* This method must return a string displaying information about the bank */
621 struct target *target = bank->target;
625 /* read stm32 device id register */
626 int retval = target_read_u32(target, DBGMCU_IDCODE, &device_id);
627 if (retval != ERROR_OK)
630 if ((device_id & 0xfff) == 0x416) {
631 printed = snprintf(buf, buf_size, "stm32lx - Rev: ");
635 switch (device_id >> 16) {
637 snprintf(buf, buf_size, "A");
641 snprintf(buf, buf_size, "Y");
645 snprintf(buf, buf_size, "X");
649 snprintf(buf, buf_size, "W");
653 snprintf(buf, buf_size, "V");
657 snprintf(buf, buf_size, "unknown");
660 } else if ((device_id & 0xfff) == 0x436) {
661 printed = snprintf(buf, buf_size, "stm32lx (HD) - Rev: ");
665 switch (device_id >> 16) {
667 snprintf(buf, buf_size, "A");
671 snprintf(buf, buf_size, "Z");
675 snprintf(buf, buf_size, "unknown");
679 snprintf(buf, buf_size, "Cannot identify target as a stm32lx");
686 static const struct command_registration stm32lx_exec_command_handlers[] = {
687 COMMAND_REGISTRATION_DONE
690 static const struct command_registration stm32lx_command_handlers[] = {
694 .help = "stm32lx flash command group",
696 .chain = stm32lx_exec_command_handlers,
698 COMMAND_REGISTRATION_DONE
701 struct flash_driver stm32lx_flash = {
703 .commands = stm32lx_command_handlers,
704 .flash_bank_command = stm32lx_flash_bank_command,
705 .erase = stm32lx_erase,
706 .protect = stm32lx_protect,
707 .write = stm32lx_write,
708 .read = default_flash_read,
709 .probe = stm32lx_probe,
710 .auto_probe = stm32lx_auto_probe,
711 .erase_check = stm32lx_erase_check,
712 .protect_check = stm32lx_protect_check,
713 .info = stm32lx_get_info,
716 /* Static methods implementation */
717 static int stm32lx_unlock_program_memory(struct flash_bank *bank)
719 struct target *target = bank->target;
724 * Unlocking the program memory is done by unlocking the PECR,
725 * then by writing the 2 PRGKEY to the PRGKEYR register
728 /* To unlock the PECR write the 2 PEKEY to the PEKEYR register */
729 retval = target_write_u32(target, FLASH_PEKEYR, PEKEY1);
730 if (retval != ERROR_OK)
733 retval = target_write_u32(target, FLASH_PEKEYR, PEKEY2);
734 if (retval != ERROR_OK)
737 /* Make sure it worked */
738 retval = target_read_u32(target, FLASH_PECR, ®32);
739 if (retval != ERROR_OK)
742 if (reg32 & FLASH_PECR__PELOCK) {
743 LOG_ERROR("PELOCK is not cleared :(");
744 return ERROR_FLASH_OPERATION_FAILED;
747 retval = target_write_u32(target, FLASH_PRGKEYR, PRGKEY1);
748 if (retval != ERROR_OK)
750 retval = target_write_u32(target, FLASH_PRGKEYR, PRGKEY2);
751 if (retval != ERROR_OK)
754 /* Make sure it worked */
755 retval = target_read_u32(target, FLASH_PECR, ®32);
756 if (retval != ERROR_OK)
759 if (reg32 & FLASH_PECR__PRGLOCK) {
760 LOG_ERROR("PRGLOCK is not cleared :(");
761 return ERROR_FLASH_OPERATION_FAILED;
766 static int stm32lx_enable_write_half_page(struct flash_bank *bank)
768 struct target *target = bank->target;
773 * Unlock the program memory, then set the FPRG bit in the PECR register.
775 retval = stm32lx_unlock_program_memory(bank);
776 if (retval != ERROR_OK)
779 retval = target_read_u32(target, FLASH_PECR, ®32);
780 if (retval != ERROR_OK)
783 reg32 |= FLASH_PECR__FPRG;
784 retval = target_write_u32(target, FLASH_PECR, reg32);
785 if (retval != ERROR_OK)
788 retval = target_read_u32(target, FLASH_PECR, ®32);
789 if (retval != ERROR_OK)
792 reg32 |= FLASH_PECR__PROG;
793 retval = target_write_u32(target, FLASH_PECR, reg32);
798 static int stm32lx_lock_program_memory(struct flash_bank *bank)
800 struct target *target = bank->target;
804 /* To lock the program memory, simply set the lock bit and lock PECR */
806 retval = target_read_u32(target, FLASH_PECR, ®32);
807 if (retval != ERROR_OK)
810 reg32 |= FLASH_PECR__PRGLOCK;
811 retval = target_write_u32(target, FLASH_PECR, reg32);
812 if (retval != ERROR_OK)
815 retval = target_read_u32(target, FLASH_PECR, ®32);
816 if (retval != ERROR_OK)
819 reg32 |= FLASH_PECR__PELOCK;
820 retval = target_write_u32(target, FLASH_PECR, reg32);
821 if (retval != ERROR_OK)
827 static int stm32lx_erase_sector(struct flash_bank *bank, int sector)
829 struct target *target = bank->target;
834 * To erase a sector (i.e. FLASH_PAGES_PER_SECTOR pages),
835 * first unlock the memory, loop over the pages of this sector
836 * and write 0x0 to its first word.
839 retval = stm32lx_unlock_program_memory(bank);
840 if (retval != ERROR_OK)
843 for (int page = 0; page < FLASH_PAGES_PER_SECTOR; page++) {
844 reg32 = FLASH_PECR__PROG | FLASH_PECR__ERASE;
845 retval = target_write_u32(target, FLASH_PECR, reg32);
846 if (retval != ERROR_OK)
849 retval = stm32lx_wait_until_bsy_clear(bank);
850 if (retval != ERROR_OK)
853 uint32_t addr = bank->base + bank->sectors[sector].offset + (page
855 retval = target_write_u32(target, addr, 0x0);
856 if (retval != ERROR_OK)
859 retval = stm32lx_wait_until_bsy_clear(bank);
860 if (retval != ERROR_OK)
864 retval = stm32lx_lock_program_memory(bank);
865 if (retval != ERROR_OK)
871 static int stm32lx_wait_until_bsy_clear(struct flash_bank *bank)
873 struct target *target = bank->target;
875 int retval = ERROR_OK;
878 /* wait for busy to clear */
880 retval = target_read_u32(target, FLASH_SR, &status);
881 if (retval != ERROR_OK)
884 if ((status & FLASH_SR__BSY) == 0)
886 if (timeout-- <= 0) {
887 LOG_ERROR("timed out waiting for flash");
893 if (status & FLASH_SR__WRPERR) {
894 LOG_ERROR("access denied / write protected");
898 if (status & FLASH_SR__PGAERR) {
899 LOG_ERROR("invalid program address");