luminary: add new targets
[fw/openocd] / src / flash / nor / stellaris.c
1 /***************************************************************************
2  *   Copyright (C) 2006 by Magnus Lundin                                   *
3  *   lundin@mlu.mine.nu                                                    *
4  *                                                                         *
5  *   Copyright (C) 2008 by Spencer Oliver                                  *
6  *   spen@spen-soft.co.uk                                                  *
7  *                                                                         *
8  *   This program is free software; you can redistribute it and/or modify  *
9  *   it under the terms of the GNU General Public License as published by  *
10  *   the Free Software Foundation; either version 2 of the License, or     *
11  *   (at your option) any later version.                                   *
12  *                                                                         *
13  *   This program is distributed in the hope that it will be useful,       *
14  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
15  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
16  *   GNU General Public License for more details.                          *
17  *                                                                         *
18  *   You should have received a copy of the GNU General Public License     *
19  *   along with this program; if not, write to the                         *
20  *   Free Software Foundation, Inc.,                                       *
21  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
22  ***************************************************************************/
23
24 /***************************************************************************
25 * STELLARIS flash is tested on LM3S811, LM3S6965, LM3s3748, more.
26 ***************************************************************************/
27 #ifdef HAVE_CONFIG_H
28 #include "config.h"
29 #endif
30
31 #include "imp.h"
32 #include <target/algorithm.h>
33 #include <target/armv7m.h>
34
35
36 #define DID0_VER(did0) ((did0 >> 28)&0x07)
37
38 /* STELLARIS control registers */
39 #define SCB_BASE        0x400FE000
40 #define DID0            0x000
41 #define DID1            0x004
42 #define DC0                     0x008
43 #define DC1                     0x010
44 #define DC2                     0x014
45 #define DC3                     0x018
46 #define DC4                     0x01C
47
48 #define RIS                     0x050
49 #define RCC                     0x060
50 #define PLLCFG          0x064
51 #define RCC2            0x070
52 #define NVMSTAT         0x1a0
53
54 /* "legacy" flash memory protection registers (64KB max) */
55 #define FMPRE           0x130
56 #define FMPPE           0x134
57
58 /* new flash memory protection registers (for more than 64KB) */
59 #define FMPRE0          0x200           /* PRE1 = PRE0 + 4, etc */
60 #define FMPPE0          0x400           /* PPE1 = PPE0 + 4, etc */
61
62 #define USECRL          0x140
63
64 #define FLASH_CONTROL_BASE      0x400FD000
65 #define FLASH_FMA       (FLASH_CONTROL_BASE | 0x000)
66 #define FLASH_FMD       (FLASH_CONTROL_BASE | 0x004)
67 #define FLASH_FMC       (FLASH_CONTROL_BASE | 0x008)
68 #define FLASH_CRIS      (FLASH_CONTROL_BASE | 0x00C)
69 #define FLASH_CIM       (FLASH_CONTROL_BASE | 0x010)
70 #define FLASH_MISC      (FLASH_CONTROL_BASE | 0x014)
71
72 #define AMISC   1
73 #define PMISC   2
74
75 #define AMASK   1
76 #define PMASK   2
77
78 /* Flash Controller Command bits */
79 #define FMC_WRKEY       (0xA442 << 16)
80 #define FMC_COMT        (1 << 3)
81 #define FMC_MERASE      (1 << 2)
82 #define FMC_ERASE       (1 << 1)
83 #define FMC_WRITE       (1 << 0)
84
85 /* STELLARIS constants */
86
87 /* values to write in FMA to commit write-"once" values */
88 #define FLASH_FMA_PRE(x)        (2 * (x))       /* for FMPPREx */
89 #define FLASH_FMA_PPE(x)        (2 * (x) + 1)   /* for FMPPPEx */
90
91
92 static void stellaris_read_clock_info(struct flash_bank *bank);
93 static int stellaris_mass_erase(struct flash_bank *bank);
94
95 struct stellaris_flash_bank
96 {
97         /* chip id register */
98         uint32_t did0;
99         uint32_t did1;
100         uint32_t dc0;
101         uint32_t dc1;
102
103         const char * target_name;
104
105         uint32_t sramsiz;
106         uint32_t flshsz;
107         /* flash geometry */
108         uint32_t num_pages;
109         uint32_t pagesize;
110         uint32_t pages_in_lockregion;
111
112         /* nv memory bits */
113         uint16_t num_lockbits;
114
115         /* main clock status */
116         uint32_t rcc;
117         uint32_t rcc2;
118         uint8_t  mck_valid;
119         uint8_t  xtal_mask;
120         uint32_t iosc_freq;
121         uint32_t mck_freq;
122         const char *iosc_desc;
123         const char *mck_desc;
124 };
125
126 // Autogenerated by contrib/gen-stellaris-part-header.pl
127 // From Stellaris Firmware Development Package revision 8049
128 static struct {
129         uint32_t partno;
130         const char *partname;
131 }       StellarisParts[] =
132 {
133         {0x0001,"LM3S101"},
134         {0x0002,"LM3S102"},
135         {0x0019,"LM3S300"},
136         {0x0011,"LM3S301"},
137         {0x001A,"LM3S308"},
138         {0x0012,"LM3S310"},
139         {0x0013,"LM3S315"},
140         {0x0014,"LM3S316"},
141         {0x0017,"LM3S317"},
142         {0x0015,"LM3S328"},
143         {0x002A,"LM3S600"},
144         {0x0021,"LM3S601"},
145         {0x002B,"LM3S608"},
146         {0x0022,"LM3S610"},
147         {0x0023,"LM3S611"},
148         {0x0024,"LM3S612"},
149         {0x0025,"LM3S613"},
150         {0x0026,"LM3S615"},
151         {0x0028,"LM3S617"},
152         {0x0029,"LM3S618"},
153         {0x0027,"LM3S628"},
154         {0x0038,"LM3S800"},
155         {0x0031,"LM3S801"},
156         {0x0039,"LM3S808"},
157         {0x0032,"LM3S811"},
158         {0x0033,"LM3S812"},
159         {0x0034,"LM3S815"},
160         {0x0036,"LM3S817"},
161         {0x0037,"LM3S818"},
162         {0x0035,"LM3S828"},
163         {0x10BF,"LM3S1110"},
164         {0x10C3,"LM3S1133"},
165         {0x10C5,"LM3S1138"},
166         {0x10C1,"LM3S1150"},
167         {0x10C4,"LM3S1162"},
168         {0x10C2,"LM3S1165"},
169         {0x10EC,"LM3S1166"},
170         {0x10C6,"LM3S1332"},
171         {0x10BC,"LM3S1435"},
172         {0x10BA,"LM3S1439"},
173         {0x10BB,"LM3S1512"},
174         {0x10C7,"LM3S1538"},
175         {0x10DB,"LM3S1601"},
176         {0x1006,"LM3S1607"},
177         {0x10DA,"LM3S1608"},
178         {0x10C0,"LM3S1620"},
179         {0x10CD,"LM3S1621"},
180         {0x1003,"LM3S1625"},
181         {0x1004,"LM3S1626"},
182         {0x1005,"LM3S1627"},
183         {0x10B3,"LM3S1635"},
184         {0x10EB,"LM3S1636"},
185         {0x10BD,"LM3S1637"},
186         {0x10B1,"LM3S1651"},
187         {0x10B9,"LM3S1751"},
188         {0x1010,"LM3S1776"},
189         {0x1016,"LM3S1811"},
190         {0x103D,"LM3S1816"},
191         {0x10B4,"LM3S1850"},
192         {0x10DD,"LM3S1911"},
193         {0x10DC,"LM3S1918"},
194         {0x10B7,"LM3S1937"},
195         {0x10BE,"LM3S1958"},
196         {0x10B5,"LM3S1960"},
197         {0x10B8,"LM3S1968"},
198         {0x10EA,"LM3S1969"},
199         {0x10CE,"LM3S1B21"},
200         {0x10CA,"LM3S1C21"},
201         {0x10CB,"LM3S1C26"},
202         {0x1098,"LM3S1C58"},
203         {0x10B0,"LM3S1D21"},
204         {0x10CC,"LM3S1D26"},
205         {0x101D,"LM3S1F11"},
206         {0x101B,"LM3S1F16"},
207         {0x10AF,"LM3S1G21"},
208         {0x1095,"LM3S1G58"},
209         {0x101E,"LM3S1H11"},
210         {0x101C,"LM3S1H16"},
211         {0x100F,"LM3S1J11"},
212         {0x103C,"LM3S1J16"},
213         {0x100E,"LM3S1N11"},
214         {0x103B,"LM3S1N16"},
215         {0x10B2,"LM3S1P51"},
216         {0x109E,"LM3S1R21"},
217         {0x10C9,"LM3S1R26"},
218         {0x1030,"LM3S1W16"},
219         {0x102F,"LM3S1Z16"},
220         {0x10D4,"LM3S2016"},
221         {0x1051,"LM3S2110"},
222         {0x1084,"LM3S2139"},
223         {0x1039,"LM3S2276"},
224         {0x10A2,"LM3S2410"},
225         {0x1059,"LM3S2412"},
226         {0x1056,"LM3S2432"},
227         {0x105A,"LM3S2533"},
228         {0x10E1,"LM3S2601"},
229         {0x10E0,"LM3S2608"},
230         {0x1033,"LM3S2616"},
231         {0x1057,"LM3S2620"},
232         {0x1085,"LM3S2637"},
233         {0x1053,"LM3S2651"},
234         {0x1080,"LM3S2671"},
235         {0x1050,"LM3S2678"},
236         {0x10A4,"LM3S2730"},
237         {0x1052,"LM3S2739"},
238         {0x103A,"LM3S2776"},
239         {0x106D,"LM3S2793"},
240         {0x10E3,"LM3S2911"},
241         {0x10E2,"LM3S2918"},
242         {0x10ED,"LM3S2919"},
243         {0x1054,"LM3S2939"},
244         {0x108F,"LM3S2948"},
245         {0x1058,"LM3S2950"},
246         {0x1055,"LM3S2965"},
247         {0x106C,"LM3S2B93"},
248         {0x1094,"LM3S2D93"},
249         {0x1093,"LM3S2U93"},
250         {0x1008,"LM3S3634"},
251         {0x1043,"LM3S3651"},
252         {0x10C8,"LM3S3654"},
253         {0x1044,"LM3S3739"},
254         {0x1049,"LM3S3748"},
255         {0x1045,"LM3S3749"},
256         {0x1042,"LM3S3826"},
257         {0x1041,"LM3S3J26"},
258         {0x1040,"LM3S3N26"},
259         {0x103F,"LM3S3W26"},
260         {0x103E,"LM3S3Z26"},
261         {0x1081,"LM3S5632"},
262         {0x100C,"LM3S5651"},
263         {0x108A,"LM3S5652"},
264         {0x104D,"LM3S5656"},
265         {0x1091,"LM3S5662"},
266         {0x1096,"LM3S5732"},
267         {0x1097,"LM3S5737"},
268         {0x10A0,"LM3S5739"},
269         {0x1099,"LM3S5747"},
270         {0x10A7,"LM3S5749"},
271         {0x109A,"LM3S5752"},
272         {0x109C,"LM3S5762"},
273         {0x1069,"LM3S5791"},
274         {0x100B,"LM3S5951"},
275         {0x104E,"LM3S5956"},
276         {0x1068,"LM3S5B91"},
277         {0x102E,"LM3S5C31"},
278         {0x102C,"LM3S5C36"},
279         {0x105E,"LM3S5C51"},
280         {0x105B,"LM3S5C56"},
281         {0x105F,"LM3S5D51"},
282         {0x105C,"LM3S5D56"},
283         {0x1087,"LM3S5D91"},
284         {0x102D,"LM3S5G31"},
285         {0x101F,"LM3S5G36"},
286         {0x105D,"LM3S5G51"},
287         {0x104F,"LM3S5G56"},
288         {0x1009,"LM3S5K31"},
289         {0x104A,"LM3S5K36"},
290         {0x100A,"LM3S5P31"},
291         {0x1048,"LM3S5P36"},
292         {0x10B6,"LM3S5P3B"},
293         {0x100D,"LM3S5P51"},
294         {0x104C,"LM3S5P56"},
295         {0x1007,"LM3S5R31"},
296         {0x104B,"LM3S5R36"},
297         {0x1047,"LM3S5T36"},
298         {0x107F,"LM3S5U91"},
299         {0x1046,"LM3S5Y36"},
300         {0x10A1,"LM3S6100"},
301         {0x1074,"LM3S6110"},
302         {0x10A5,"LM3S6420"},
303         {0x1082,"LM3S6422"},
304         {0x1075,"LM3S6432"},
305         {0x1076,"LM3S6537"},
306         {0x1071,"LM3S6610"},
307         {0x10E7,"LM3S6611"},
308         {0x10E6,"LM3S6618"},
309         {0x1083,"LM3S6633"},
310         {0x108B,"LM3S6637"},
311         {0x10A3,"LM3S6730"},
312         {0x1077,"LM3S6753"},
313         {0x10D1,"LM3S6816"},
314         {0x10E9,"LM3S6911"},
315         {0x10D3,"LM3S6916"},
316         {0x10E8,"LM3S6918"},
317         {0x1089,"LM3S6938"},
318         {0x1072,"LM3S6950"},
319         {0x1078,"LM3S6952"},
320         {0x1073,"LM3S6965"},
321         {0x10AA,"LM3S6C11"},
322         {0x10AC,"LM3S6C65"},
323         {0x109F,"LM3S6G11"},
324         {0x10AB,"LM3S6G65"},
325         {0x1064,"LM3S8530"},
326         {0x108E,"LM3S8538"},
327         {0x1061,"LM3S8630"},
328         {0x1063,"LM3S8730"},
329         {0x108D,"LM3S8733"},
330         {0x1086,"LM3S8738"},
331         {0x1065,"LM3S8930"},
332         {0x108C,"LM3S8933"},
333         {0x1088,"LM3S8938"},
334         {0x10A6,"LM3S8962"},
335         {0x1062,"LM3S8970"},
336         {0x10D7,"LM3S8971"},
337         {0x10AE,"LM3S8C62"},
338         {0x10AD,"LM3S8G62"},
339         {0x10CF,"LM3S9781"},
340         {0x1067,"LM3S9790"},
341         {0x106B,"LM3S9792"},
342         {0x102D,"LM3S9971"},
343         {0x1020,"LM3S9997"},
344         {0x10D0,"LM3S9B81"},
345         {0x1066,"LM3S9B90"},
346         {0x106A,"LM3S9B92"},
347         {0x106E,"LM3S9B95"},
348         {0x106F,"LM3S9B96"},
349         {0x101D,"LM3S9BN2"},
350         {0x101E,"LM3S9BN5"},
351         {0x101F,"LM3S9BN6"},
352         {0x1070,"LM3S9C97"},
353         {0x107A,"LM3S9CN5"},
354         {0x10A9,"LM3S9D81"},
355         {0x107E,"LM3S9D90"},
356         {0x1092,"LM3S9D92"},
357         {0x10C8,"LM3S9D95"},
358         {0x109D,"LM3S9D96"},
359         {0x107B,"LM3S9DN5"},
360         {0x107C,"LM3S9DN6"},
361         {0x1060,"LM3S9G97"},
362         {0x1079,"LM3S9GN5"},
363         {0x101B,"LM3S9L71"},
364         {0x1018,"LM3S9L97"},
365         {0x10A8,"LM3S9U81"},
366         {0x107D,"LM3S9U90"},
367         {0x1090,"LM3S9U92"},
368         {0x10B7,"LM3S9U95"},
369         {0x109B,"LM3S9U96"},
370         {0,"Unknown part"}
371 };
372
373 static char * StellarisClassname[7] =
374 {
375         "Sandstorm",
376         "Fury",
377         "Unknown",
378         "DustDevil",
379         "Tempest",
380         "Unknown",
381         "Firestorm"
382 };
383
384 /***************************************************************************
385 *       openocd command interface                                              *
386 ***************************************************************************/
387
388 /* flash_bank stellaris <base> <size> 0 0 <target#>
389  */
390 FLASH_BANK_COMMAND_HANDLER(stellaris_flash_bank_command)
391 {
392         struct stellaris_flash_bank *stellaris_info;
393
394         if (CMD_ARGC < 6)
395         {
396                 LOG_WARNING("incomplete flash_bank stellaris configuration");
397                 return ERROR_FLASH_BANK_INVALID;
398         }
399
400         stellaris_info = calloc(sizeof(struct stellaris_flash_bank), 1);
401         bank->base = 0x0;
402         bank->driver_priv = stellaris_info;
403
404         stellaris_info->target_name = "Unknown target";
405
406         /* part wasn't probed for info yet */
407         stellaris_info->did1 = 0;
408
409         /* TODO Specify the main crystal speed in kHz using an optional
410          * argument; ditto, the speed of an external oscillator used
411          * instead of a crystal.  Avoid programming flash using IOSC.
412          */
413         return ERROR_OK;
414 }
415
416 static int get_stellaris_info(struct flash_bank *bank, char *buf, int buf_size)
417 {
418         int printed, device_class;
419         struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
420
421         if (stellaris_info->did1 == 0)
422                 return ERROR_FLASH_BANK_NOT_PROBED;
423
424         /* Read main and master clock freqency register */
425         stellaris_read_clock_info(bank);
426
427         if (DID0_VER(stellaris_info->did0) > 0)
428         {
429                 device_class = (stellaris_info->did0 >> 16) & 0xFF;
430         }
431         else
432         {
433                 device_class = 0;
434         }
435         printed = snprintf(buf,
436                            buf_size,
437                            "\nTI/LMI Stellaris information: Chip is "
438                            "class %i (%s) %s rev %c%i\n",
439                            device_class,
440                            StellarisClassname[device_class],
441                            stellaris_info->target_name,
442                            (int)('A' + ((stellaris_info->did0 >> 8) & 0xFF)),
443                            (int)((stellaris_info->did0) & 0xFF));
444         buf += printed;
445         buf_size -= printed;
446
447         printed = snprintf(buf,
448                            buf_size,
449                            "did1: 0x%8.8" PRIx32 ", arch: 0x%4.4" PRIx32
450                            ", eproc: %s, ramsize: %ik, flashsize: %ik\n",
451                            stellaris_info->did1,
452                            stellaris_info->did1,
453                            "ARMv7M",
454                            (int)((1 + ((stellaris_info->dc0 >> 16) & 0xFFFF))/4),
455                            (int)((1 + (stellaris_info->dc0 & 0xFFFF))*2));
456         buf += printed;
457         buf_size -= printed;
458
459         printed = snprintf(buf,
460                            buf_size,
461                            "master clock: %ikHz%s, "
462                            "rcc is 0x%" PRIx32 ", rcc2 is 0x%" PRIx32 "\n",
463                            (int)(stellaris_info->mck_freq / 1000),
464                            stellaris_info->mck_desc,
465                            stellaris_info->rcc,
466                            stellaris_info->rcc2);
467         buf += printed;
468         buf_size -= printed;
469
470         if (stellaris_info->num_lockbits > 0)
471         {
472                 printed = snprintf(buf,
473                                 buf_size,
474                                 "pagesize: %" PRIi32 ", pages: %d, "
475                                 "lockbits: %i, pages per lockbit: %i\n",
476                                 stellaris_info->pagesize,
477                                 (unsigned) stellaris_info->num_pages,
478                                 stellaris_info->num_lockbits,
479                                 (unsigned) stellaris_info->pages_in_lockregion);
480                 buf += printed;
481                 buf_size -= printed;
482         }
483         return ERROR_OK;
484 }
485
486 /***************************************************************************
487 *       chip identification and status                                         *
488 ***************************************************************************/
489
490 /* Set the flash timimg register to match current clocking */
491 static void stellaris_set_flash_timing(struct flash_bank *bank)
492 {
493         struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
494         struct target *target = bank->target;
495         uint32_t usecrl = (stellaris_info->mck_freq/1000000ul-1);
496
497         LOG_DEBUG("usecrl = %i",(int)(usecrl));
498         target_write_u32(target, SCB_BASE | USECRL, usecrl);
499 }
500
501 static const unsigned rcc_xtal[32] = {
502         [0x00] = 1000000,               /* no pll */
503         [0x01] = 1843200,               /* no pll */
504         [0x02] = 2000000,               /* no pll */
505         [0x03] = 2457600,               /* no pll */
506
507         [0x04] = 3579545,
508         [0x05] = 3686400,
509         [0x06] = 4000000,               /* usb */
510         [0x07] = 4096000,
511
512         [0x08] = 4915200,
513         [0x09] = 5000000,               /* usb */
514         [0x0a] = 5120000,
515         [0x0b] = 6000000,               /* (reset) usb */
516
517         [0x0c] = 6144000,
518         [0x0d] = 7372800,
519         [0x0e] = 8000000,               /* usb */
520         [0x0f] = 8192000,
521
522         /* parts before DustDevil use just 4 bits for xtal spec */
523
524         [0x10] = 10000000,              /* usb */
525         [0x11] = 12000000,              /* usb */
526         [0x12] = 12288000,
527         [0x13] = 13560000,
528
529         [0x14] = 14318180,
530         [0x15] = 16000000,              /* usb */
531         [0x16] = 16384000,
532 };
533
534 /** Read clock configuration and set stellaris_info->usec_clocks. */
535 static void stellaris_read_clock_info(struct flash_bank *bank)
536 {
537         struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
538         struct target *target = bank->target;
539         uint32_t rcc, rcc2, pllcfg, sysdiv, usesysdiv, bypass, oscsrc;
540         unsigned xtal;
541         unsigned long mainfreq;
542
543         target_read_u32(target, SCB_BASE | RCC, &rcc);
544         LOG_DEBUG("Stellaris RCC %" PRIx32 "", rcc);
545
546         target_read_u32(target, SCB_BASE | RCC2, &rcc2);
547         LOG_DEBUG("Stellaris RCC2 %" PRIx32 "", rcc);
548
549         target_read_u32(target, SCB_BASE | PLLCFG, &pllcfg);
550         LOG_DEBUG("Stellaris PLLCFG %" PRIx32 "", pllcfg);
551
552         stellaris_info->rcc = rcc;
553         stellaris_info->rcc = rcc2;
554
555         sysdiv = (rcc >> 23) & 0xF;
556         usesysdiv = (rcc >> 22) & 0x1;
557         bypass = (rcc >> 11) & 0x1;
558         oscsrc = (rcc >> 4) & 0x3;
559         xtal = (rcc >> 6) & stellaris_info->xtal_mask;
560
561         /* NOTE: post-Sandstorm parts have RCC2 which may override
562          * parts of RCC ... with more sysdiv options, option for
563          * 32768 Hz mainfreq, PLL controls.  On Sandstorm it reads
564          * as zero, so the "use RCC2" flag is always clear.
565          */
566         if (rcc2 & (1 << 31)) {
567                 sysdiv = (rcc2 >> 23) & 0x3F;
568                 bypass = (rcc2 >> 11) & 0x1;
569                 oscsrc = (rcc2 >> 4) & 0x7;
570
571                 /* FIXME Tempest parts have an additional lsb for
572                  * fractional sysdiv (200 MHz / 2.5 == 80 MHz)
573                  */
574         }
575
576         stellaris_info->mck_desc = "";
577
578         switch (oscsrc)
579         {
580                 case 0:                         /* MOSC */
581                         mainfreq = rcc_xtal[xtal];
582                         break;
583                 case 1:                         /* IOSC */
584                         mainfreq = stellaris_info->iosc_freq;
585                         stellaris_info->mck_desc = stellaris_info->iosc_desc;
586                         break;
587                 case 2:                         /* IOSC/4 */
588                         mainfreq = stellaris_info->iosc_freq / 4;
589                         stellaris_info->mck_desc = stellaris_info->iosc_desc;
590                         break;
591                 case 3:                         /* lowspeed */
592                         /* Sandstorm doesn't have this 30K +/- 30% osc */
593                         mainfreq = 30000;
594                         stellaris_info->mck_desc = " (±30%)";
595                         break;
596                 case 8:                         /* hibernation osc */
597                         /* not all parts support hibernation */
598                         mainfreq = 32768;
599                         break;
600
601                 default: /* NOTREACHED */
602                         mainfreq = 0;
603                         break;
604         }
605
606         /* PLL is used if it's not bypassed; its output is 200 MHz
607          * even when it runs at 400 MHz (adds divide-by-two stage).
608          */
609         if (!bypass)
610                 mainfreq = 200000000;
611
612         if (usesysdiv)
613                 stellaris_info->mck_freq = mainfreq/(1 + sysdiv);
614         else
615                 stellaris_info->mck_freq = mainfreq;
616 }
617
618 /* Read device id register, main clock frequency register and fill in driver info structure */
619 static int stellaris_read_part_info(struct flash_bank *bank)
620 {
621         struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
622         struct target *target = bank->target;
623         uint32_t did0, did1, ver, fam;
624         int i;
625
626         /* Read and parse chip identification register */
627         target_read_u32(target, SCB_BASE | DID0, &did0);
628         target_read_u32(target, SCB_BASE | DID1, &did1);
629         target_read_u32(target, SCB_BASE | DC0, &stellaris_info->dc0);
630         target_read_u32(target, SCB_BASE | DC1, &stellaris_info->dc1);
631         LOG_DEBUG("did0 0x%" PRIx32 ", did1 0x%" PRIx32 ", dc0 0x%" PRIx32 ", dc1 0x%" PRIx32 "",
632                   did0, did1, stellaris_info->dc0, stellaris_info->dc1);
633
634         ver = did0 >> 28;
635         if ((ver != 0) && (ver != 1))
636         {
637                 LOG_WARNING("Unknown did0 version, cannot identify target");
638                 return ERROR_FLASH_OPERATION_FAILED;
639         }
640
641         if (did1 == 0)
642         {
643                 LOG_WARNING("Cannot identify target as a Stellaris");
644                 return ERROR_FLASH_OPERATION_FAILED;
645         }
646
647         ver = did1 >> 28;
648         fam = (did1 >> 24) & 0xF;
649         if (((ver != 0) && (ver != 1)) || (fam != 0))
650         {
651                 LOG_WARNING("Unknown did1 version/family.");
652                 return ERROR_FLASH_OPERATION_FAILED;
653         }
654
655         /* For Sandstorm, Fury, DustDevil:  current data sheets say IOSC
656          * is 12 MHz, but some older parts have 15 MHz.  A few data sheets
657          * even give _both_ numbers!  We'll use current numbers; IOSC is
658          * always approximate.
659          *
660          * For Tempest:  IOSC is calibrated, 16 MHz
661          */
662         stellaris_info->iosc_freq = 12000000;
663         stellaris_info->iosc_desc = " (±30%)";
664         stellaris_info->xtal_mask = 0x0f;
665
666         switch ((did0 >> 28) & 0x7) {
667         case 0:                         /* Sandstorm */
668                 /*
669                  * Current (2009-August) parts seem to be rev C2 and use 12 MHz.
670                  * Parts before rev C0 used 15 MHz; some C0 parts use 15 MHz
671                  * (LM3S618), but some other C0 parts are 12 MHz (LM3S811).
672                  */
673                 if (((did0 >> 8) & 0xff) < 2) {
674                         stellaris_info->iosc_freq = 15000000;
675                         stellaris_info->iosc_desc = " (±50%)";
676                 }
677                 break;
678         case 1:
679                 switch ((did0 >> 16) & 0xff) {
680                 case 1:                 /* Fury */
681                         break;
682                 case 4:                 /* Tempest */
683                         stellaris_info->iosc_freq = 16000000;   /* +/- 1% */
684                         stellaris_info->iosc_desc = " (±1%)";
685                         /* FALL THROUGH */
686                 case 3:                 /* DustDevil */
687                         stellaris_info->xtal_mask = 0x1f;
688                         break;
689                 default:
690                         LOG_WARNING("Unknown did0 class");
691                 }
692                 break;
693         default:
694                 LOG_WARNING("Unknown did0 version");
695                 break;
696         }
697
698         for (i = 0; StellarisParts[i].partno; i++)
699         {
700                 if (StellarisParts[i].partno == ((did1 >> 16) & 0xFFFF))
701                         break;
702         }
703
704         stellaris_info->target_name = StellarisParts[i].partname;
705
706         stellaris_info->did0 = did0;
707         stellaris_info->did1 = did1;
708
709         stellaris_info->num_lockbits = 1 + (stellaris_info->dc0 & 0xFFFF);
710         stellaris_info->num_pages = 2 *(1 + (stellaris_info->dc0 & 0xFFFF));
711         stellaris_info->pagesize = 1024;
712         stellaris_info->pages_in_lockregion = 2;
713
714         /* REVISIT for at least Tempest parts, read NVMSTAT.FWB too.
715          * That exposes a 32-word Flash Write Buffer ... enabling
716          * writes of more than one word at a time.
717          */
718
719         return ERROR_OK;
720 }
721
722 /***************************************************************************
723 *       flash operations                                                       *
724 ***************************************************************************/
725
726 static int stellaris_protect_check(struct flash_bank *bank)
727 {
728         struct stellaris_flash_bank *stellaris = bank->driver_priv;
729         int status = ERROR_OK;
730         unsigned i;
731         unsigned page;
732
733         if (stellaris->did1 == 0)
734                 return ERROR_FLASH_BANK_NOT_PROBED;
735
736         for (i = 0; i < (unsigned) bank->num_sectors; i++)
737                 bank->sectors[i].is_protected = -1;
738
739         /* Read each Flash Memory Protection Program Enable (FMPPE) register
740          * to report any pages that we can't write.  Ignore the Read Enable
741          * register (FMPRE).
742          */
743         for (i = 0, page = 0;
744                         i < DIV_ROUND_UP(stellaris->num_lockbits, 32u);
745                         i++) {
746                 uint32_t lockbits;
747
748                 status = target_read_u32(bank->target,
749                                 SCB_BASE + (i ? (FMPPE0 + 4 * i) : FMPPE),
750                                 &lockbits);
751                 LOG_DEBUG("FMPPE%d = %#8.8x (status %d)", i,
752                                 (unsigned) lockbits, status);
753                 if (status != ERROR_OK)
754                         goto done;
755
756                 for (unsigned j = 0; j < 32; j++) {
757                         unsigned k;
758
759                         for (k = 0; k < stellaris->pages_in_lockregion; k++) {
760                                 if (page >= (unsigned) bank->num_sectors)
761                                         goto done;
762                                 bank->sectors[page++].is_protected =
763                                                 !(lockbits & (1 << j));
764                         }
765                 }
766         }
767
768 done:
769         return status;
770 }
771
772 static int stellaris_erase(struct flash_bank *bank, int first, int last)
773 {
774         int banknr;
775         uint32_t flash_fmc, flash_cris;
776         struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
777         struct target *target = bank->target;
778
779         if (bank->target->state != TARGET_HALTED)
780         {
781                 LOG_ERROR("Target not halted");
782                 return ERROR_TARGET_NOT_HALTED;
783         }
784
785         if (stellaris_info->did1 == 0)
786                 return ERROR_FLASH_BANK_NOT_PROBED;
787
788         if ((first < 0) || (last < first) || (last >= (int)stellaris_info->num_pages))
789         {
790                 return ERROR_FLASH_SECTOR_INVALID;
791         }
792
793         if ((first == 0) && (last == ((int)stellaris_info->num_pages-1)))
794         {
795                 return stellaris_mass_erase(bank);
796         }
797
798         /* Refresh flash controller timing */
799         stellaris_read_clock_info(bank);
800         stellaris_set_flash_timing(bank);
801
802         /* Clear and disable flash programming interrupts */
803         target_write_u32(target, FLASH_CIM, 0);
804         target_write_u32(target, FLASH_MISC, PMISC | AMISC);
805
806         /* REVISIT this clobbers state set by any halted firmware ...
807          * it might want to process those IRQs.
808          */
809
810         for (banknr = first; banknr <= last; banknr++)
811         {
812                 /* Address is first word in page */
813                 target_write_u32(target, FLASH_FMA, banknr * stellaris_info->pagesize);
814                 /* Write erase command */
815                 target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_ERASE);
816                 /* Wait until erase complete */
817                 do
818                 {
819                         target_read_u32(target, FLASH_FMC, &flash_fmc);
820                 }
821                 while (flash_fmc & FMC_ERASE);
822
823                 /* Check acess violations */
824                 target_read_u32(target, FLASH_CRIS, &flash_cris);
825                 if (flash_cris & (AMASK))
826                 {
827                         LOG_WARNING("Error erasing flash page %i,  flash_cris 0x%" PRIx32 "", banknr, flash_cris);
828                         target_write_u32(target, FLASH_CRIS, 0);
829                         return ERROR_FLASH_OPERATION_FAILED;
830                 }
831
832                 bank->sectors[banknr].is_erased = 1;
833         }
834
835         return ERROR_OK;
836 }
837
838 static int stellaris_protect(struct flash_bank *bank, int set, int first, int last)
839 {
840         uint32_t fmppe, flash_fmc, flash_cris;
841         int lockregion;
842
843         struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
844         struct target *target = bank->target;
845
846         if (bank->target->state != TARGET_HALTED)
847         {
848                 LOG_ERROR("Target not halted");
849                 return ERROR_TARGET_NOT_HALTED;
850         }
851
852         if (!set)
853         {
854                 LOG_ERROR("Hardware doesn't support page-level unprotect. "
855                         "Try the 'recover' command.");
856                 return ERROR_INVALID_ARGUMENTS;
857         }
858
859         if (stellaris_info->did1 == 0)
860                 return ERROR_FLASH_BANK_NOT_PROBED;
861
862         /* lockregions are 2 pages ... must protect [even..odd] */
863         if ((first < 0) || (first & 1)
864                         || (last < first) || !(last & 1)
865                         || (last >= 2 * stellaris_info->num_lockbits))
866         {
867                 LOG_ERROR("Can't protect unaligned or out-of-range pages.");
868                 return ERROR_FLASH_SECTOR_INVALID;
869         }
870
871         /* Refresh flash controller timing */
872         stellaris_read_clock_info(bank);
873         stellaris_set_flash_timing(bank);
874
875         /* convert from pages to lockregions */
876         first /= 2;
877         last /= 2;
878
879         /* FIXME this assumes single FMPPE, for a max of 64K of flash!!
880          * Current parts can be much bigger.
881          */
882         if (last >= 32) {
883                 LOG_ERROR("No support yet for protection > 64K");
884                 return ERROR_FLASH_OPERATION_FAILED;
885         }
886
887         target_read_u32(target, SCB_BASE | FMPPE, &fmppe);
888
889         for (lockregion = first; lockregion <= last; lockregion++)
890                 fmppe &= ~(1 << lockregion);
891
892         /* Clear and disable flash programming interrupts */
893         target_write_u32(target, FLASH_CIM, 0);
894         target_write_u32(target, FLASH_MISC, PMISC | AMISC);
895
896         /* REVISIT this clobbers state set by any halted firmware ...
897          * it might want to process those IRQs.
898          */
899
900         LOG_DEBUG("fmppe 0x%" PRIx32 "",fmppe);
901         target_write_u32(target, SCB_BASE | FMPPE, fmppe);
902
903         /* Commit FMPPE */
904         target_write_u32(target, FLASH_FMA, 1);
905
906         /* Write commit command */
907         /* REVISIT safety check, since this cannot be undone
908          * except by the "Recover a locked device" procedure.
909          * REVISIT DustDevil-A0 parts have an erratum making FMPPE commits
910          * inadvisable ... it makes future mass erase operations fail.
911          */
912         LOG_WARNING("Flash protection cannot be removed once committed, commit is NOT executed !");
913         /* target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_COMT); */
914
915         /* Wait until erase complete */
916         do
917         {
918                 target_read_u32(target, FLASH_FMC, &flash_fmc);
919         }
920         while (flash_fmc & FMC_COMT);
921
922         /* Check acess violations */
923         target_read_u32(target, FLASH_CRIS, &flash_cris);
924         if (flash_cris & (AMASK))
925         {
926                 LOG_WARNING("Error setting flash page protection,  flash_cris 0x%" PRIx32 "", flash_cris);
927                 target_write_u32(target, FLASH_CRIS, 0);
928                 return ERROR_FLASH_OPERATION_FAILED;
929         }
930
931         return ERROR_OK;
932 }
933
934 /* see contib/loaders/flash/stellaris.s for src */
935
936 static const uint8_t stellaris_write_code[] =
937 {
938 /*
939         Call with :
940         r0 = buffer address
941         r1 = destination address
942         r2 = bytecount (in) - endaddr (work)
943
944         Used registers:
945         r3 = pFLASH_CTRL_BASE
946         r4 = FLASHWRITECMD
947         r5 = #1
948         r6 = bytes written
949         r7 = temp reg
950 */
951         0x07,0x4B,                      /* ldr r3,pFLASH_CTRL_BASE */
952         0x08,0x4C,                      /* ldr r4,FLASHWRITECMD */
953         0x01,0x25,                      /* movs r5, 1 */
954         0x00,0x26,                      /* movs r6, #0 */
955 /* mainloop: */
956         0x19,0x60,                      /* str  r1, [r3, #0] */
957         0x87,0x59,                      /* ldr  r7, [r0, r6] */
958         0x5F,0x60,                      /* str  r7, [r3, #4] */
959         0x9C,0x60,                      /* str  r4, [r3, #8] */
960 /* waitloop: */
961         0x9F,0x68,                      /* ldr  r7, [r3, #8] */
962         0x2F,0x42,                      /* tst  r7, r5 */
963         0xFC,0xD1,                      /* bne  waitloop */
964         0x04,0x31,                      /* adds r1, r1, #4 */
965         0x04,0x36,                      /* adds r6, r6, #4 */
966         0x96,0x42,                      /* cmp  r6, r2 */
967         0xF4,0xD1,                      /* bne  mainloop */
968         0x00,0xBE,              /* bkpt #0 */
969 /* pFLASH_CTRL_BASE: */
970         0x00,0xD0,0x0F,0x40,    /* .word        0x400FD000 */
971 /* FLASHWRITECMD: */
972         0x01,0x00,0x42,0xA4     /* .word        0xA4420001 */
973 };
974
975 static int stellaris_write_block(struct flash_bank *bank,
976                 uint8_t *buffer, uint32_t offset, uint32_t wcount)
977 {
978         struct target *target = bank->target;
979         uint32_t buffer_size = 16384;
980         struct working_area *source;
981         struct working_area *write_algorithm;
982         uint32_t address = bank->base + offset;
983         struct reg_param reg_params[3];
984         struct armv7m_algorithm armv7m_info;
985         int retval = ERROR_OK;
986
987         /* power of two, and multiple of word size */
988         static const unsigned buf_min = 128;
989
990         /* for small buffers it's faster not to download an algorithm */
991         if (wcount * 4 < buf_min)
992                 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
993
994         LOG_DEBUG("(bank=%p buffer=%p offset=%08" PRIx32 " wcount=%08" PRIx32 "",
995                         bank, buffer, offset, wcount);
996
997         /* flash write code */
998         if (target_alloc_working_area(target, sizeof(stellaris_write_code), &write_algorithm) != ERROR_OK)
999         {
1000                 LOG_DEBUG("no working area for block memory writes");
1001                 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1002         };
1003
1004         /* plus a buffer big enough for this data */
1005         if (wcount * 4 < buffer_size)
1006                 buffer_size = wcount * 4;
1007
1008         /* memory buffer */
1009         while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK)
1010         {
1011                 buffer_size /= 2;
1012                 if (buffer_size <= buf_min)
1013                 {
1014                         target_free_working_area(target, write_algorithm);
1015                         return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1016                 }
1017                 LOG_DEBUG("retry target_alloc_working_area(%s, size=%u)",
1018                                 target_name(target), (unsigned) buffer_size);
1019         };
1020
1021         retval = target_write_buffer(target, write_algorithm->address,
1022                         sizeof(stellaris_write_code),
1023                         (uint8_t *) stellaris_write_code);
1024
1025         armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
1026         armv7m_info.core_mode = ARMV7M_MODE_ANY;
1027
1028         init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
1029         init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
1030         init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
1031
1032         while (wcount > 0)
1033         {
1034                 uint32_t thisrun_count = (wcount > (buffer_size / 4)) ? (buffer_size / 4) : wcount;
1035
1036                 target_write_buffer(target, source->address, thisrun_count * 4, buffer);
1037
1038                 buf_set_u32(reg_params[0].value, 0, 32, source->address);
1039                 buf_set_u32(reg_params[1].value, 0, 32, address);
1040                 buf_set_u32(reg_params[2].value, 0, 32, 4*thisrun_count);
1041                 LOG_DEBUG("Algorithm flash write %u words to 0x%" PRIx32
1042                                 ", %u remaining",
1043                                 (unsigned) thisrun_count, address,
1044                                 (unsigned) (wcount - thisrun_count));
1045                 retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
1046                                 write_algorithm->address,
1047                                 0,
1048                                 10000, &armv7m_info);
1049                 if (retval != ERROR_OK)
1050                 {
1051                         LOG_ERROR("error %d executing stellaris "
1052                                         "flash write algorithm",
1053                                         retval);
1054                         retval = ERROR_FLASH_OPERATION_FAILED;
1055                         break;
1056                 }
1057
1058                 buffer += thisrun_count * 4;
1059                 address += thisrun_count * 4;
1060                 wcount -= thisrun_count;
1061         }
1062
1063         /* REVISIT we could speed up writing multi-section images by
1064          * not freeing the initialized write_algorithm this way.
1065          */
1066
1067         target_free_working_area(target, write_algorithm);
1068         target_free_working_area(target, source);
1069
1070         destroy_reg_param(&reg_params[0]);
1071         destroy_reg_param(&reg_params[1]);
1072         destroy_reg_param(&reg_params[2]);
1073
1074         return retval;
1075 }
1076
1077 static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
1078 {
1079         struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
1080         struct target *target = bank->target;
1081         uint32_t address = offset;
1082         uint32_t flash_cris, flash_fmc;
1083         uint32_t words_remaining = (count / 4);
1084         uint32_t bytes_remaining = (count & 0x00000003);
1085         uint32_t bytes_written = 0;
1086         int retval;
1087
1088         if (bank->target->state != TARGET_HALTED)
1089         {
1090                 LOG_ERROR("Target not halted");
1091                 return ERROR_TARGET_NOT_HALTED;
1092         }
1093
1094         LOG_DEBUG("(bank=%p buffer=%p offset=%08" PRIx32 " count=%08" PRIx32 "",
1095                         bank, buffer, offset, count);
1096
1097         if (stellaris_info->did1 == 0)
1098                 return ERROR_FLASH_BANK_NOT_PROBED;
1099
1100         if (offset & 0x3)
1101         {
1102                 LOG_WARNING("offset size must be word aligned");
1103                 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
1104         }
1105
1106         if (offset + count > bank->size)
1107                 return ERROR_FLASH_DST_OUT_OF_BANK;
1108
1109         /* Refresh flash controller timing */
1110         stellaris_read_clock_info(bank);
1111         stellaris_set_flash_timing(bank);
1112
1113         /* Clear and disable flash programming interrupts */
1114         target_write_u32(target, FLASH_CIM, 0);
1115         target_write_u32(target, FLASH_MISC, PMISC | AMISC);
1116
1117         /* REVISIT this clobbers state set by any halted firmware ...
1118          * it might want to process those IRQs.
1119          */
1120
1121         /* multiple words to be programmed? */
1122         if (words_remaining > 0)
1123         {
1124                 /* try using a block write */
1125                 retval = stellaris_write_block(bank, buffer, offset,
1126                                 words_remaining);
1127                 if (retval != ERROR_OK)
1128                 {
1129                         if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
1130                         {
1131                                 LOG_DEBUG("writing flash word-at-a-time");
1132                         }
1133                         else if (retval == ERROR_FLASH_OPERATION_FAILED)
1134                         {
1135                                 /* if an error occured, we examine the reason, and quit */
1136                                 target_read_u32(target, FLASH_CRIS, &flash_cris);
1137
1138                                 LOG_ERROR("flash writing failed with CRIS: 0x%" PRIx32 "", flash_cris);
1139                                 return ERROR_FLASH_OPERATION_FAILED;
1140                         }
1141                 }
1142                 else
1143                 {
1144                         buffer += words_remaining * 4;
1145                         address += words_remaining * 4;
1146                         words_remaining = 0;
1147                 }
1148         }
1149
1150         while (words_remaining > 0)
1151         {
1152                 if (!(address & 0xff))
1153                         LOG_DEBUG("0x%" PRIx32 "", address);
1154
1155                 /* Program one word */
1156                 target_write_u32(target, FLASH_FMA, address);
1157                 target_write_buffer(target, FLASH_FMD, 4, buffer);
1158                 target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_WRITE);
1159                 /* LOG_DEBUG("0x%x 0x%x 0x%x",address,buf_get_u32(buffer, 0, 32),FMC_WRKEY | FMC_WRITE); */
1160                 /* Wait until write complete */
1161                 do
1162                 {
1163                         target_read_u32(target, FLASH_FMC, &flash_fmc);
1164                 } while (flash_fmc & FMC_WRITE);
1165
1166                 buffer += 4;
1167                 address += 4;
1168                 words_remaining--;
1169         }
1170
1171         if (bytes_remaining)
1172         {
1173                 uint8_t last_word[4] = {0xff, 0xff, 0xff, 0xff};
1174                 int i = 0;
1175
1176                 while (bytes_remaining > 0)
1177                 {
1178                         last_word[i++] = *(buffer + bytes_written);
1179                         bytes_remaining--;
1180                         bytes_written++;
1181                 }
1182
1183                 if (!(address & 0xff))
1184                         LOG_DEBUG("0x%" PRIx32 "", address);
1185
1186                 /* Program one word */
1187                 target_write_u32(target, FLASH_FMA, address);
1188                 target_write_buffer(target, FLASH_FMD, 4, last_word);
1189                 target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_WRITE);
1190                 /* LOG_DEBUG("0x%x 0x%x 0x%x",address,buf_get_u32(buffer, 0, 32),FMC_WRKEY | FMC_WRITE); */
1191                 /* Wait until write complete */
1192                 do
1193                 {
1194                         target_read_u32(target, FLASH_FMC, &flash_fmc);
1195                 } while (flash_fmc & FMC_WRITE);
1196         }
1197
1198         /* Check access violations */
1199         target_read_u32(target, FLASH_CRIS, &flash_cris);
1200         if (flash_cris & (AMASK))
1201         {
1202                 LOG_DEBUG("flash_cris 0x%" PRIx32 "", flash_cris);
1203                 return ERROR_FLASH_OPERATION_FAILED;
1204         }
1205         return ERROR_OK;
1206 }
1207
1208 static int stellaris_probe(struct flash_bank *bank)
1209 {
1210         struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
1211         int retval;
1212
1213         /* If this is a stellaris chip, it has flash; probe() is just
1214          * to figure out how much is present.  Only do it once.
1215          */
1216         if (stellaris_info->did1 != 0)
1217                 return ERROR_OK;
1218
1219         /* stellaris_read_part_info() already handled error checking and
1220          * reporting.  Note that it doesn't write, so we don't care about
1221          * whether the target is halted or not.
1222          */
1223         retval = stellaris_read_part_info(bank);
1224         if (retval != ERROR_OK)
1225                 return retval;
1226
1227         if (bank->sectors)
1228         {
1229                 free(bank->sectors);
1230                 bank->sectors = NULL;
1231         }
1232
1233         /* provide this for the benefit of the NOR flash framework */
1234         bank->size = 1024 * stellaris_info->num_pages;
1235         bank->num_sectors = stellaris_info->num_pages;
1236         bank->sectors = calloc(bank->num_sectors, sizeof(struct flash_sector));
1237         for (int i = 0; i < bank->num_sectors; i++)
1238         {
1239                 bank->sectors[i].offset = i * stellaris_info->pagesize;
1240                 bank->sectors[i].size = stellaris_info->pagesize;
1241                 bank->sectors[i].is_erased = -1;
1242                 bank->sectors[i].is_protected = -1;
1243         }
1244
1245         return retval;
1246 }
1247
1248 static int stellaris_mass_erase(struct flash_bank *bank)
1249 {
1250         struct target *target = NULL;
1251         struct stellaris_flash_bank *stellaris_info = NULL;
1252         uint32_t flash_fmc;
1253
1254         stellaris_info = bank->driver_priv;
1255         target = bank->target;
1256
1257         if (target->state != TARGET_HALTED)
1258         {
1259                 LOG_ERROR("Target not halted");
1260                 return ERROR_TARGET_NOT_HALTED;
1261         }
1262
1263         if (stellaris_info->did1 == 0)
1264                 return ERROR_FLASH_BANK_NOT_PROBED;
1265
1266         /* Refresh flash controller timing */
1267         stellaris_read_clock_info(bank);
1268         stellaris_set_flash_timing(bank);
1269
1270         /* Clear and disable flash programming interrupts */
1271         target_write_u32(target, FLASH_CIM, 0);
1272         target_write_u32(target, FLASH_MISC, PMISC | AMISC);
1273
1274         /* REVISIT this clobbers state set by any halted firmware ...
1275          * it might want to process those IRQs.
1276          */
1277
1278         target_write_u32(target, FLASH_FMA, 0);
1279         target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE);
1280         /* Wait until erase complete */
1281         do
1282         {
1283                 target_read_u32(target, FLASH_FMC, &flash_fmc);
1284         }
1285         while (flash_fmc & FMC_MERASE);
1286
1287         /* if device has > 128k, then second erase cycle is needed
1288          * this is only valid for older devices, but will not hurt */
1289         if (stellaris_info->num_pages * stellaris_info->pagesize > 0x20000)
1290         {
1291                 target_write_u32(target, FLASH_FMA, 0x20000);
1292                 target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE);
1293                 /* Wait until erase complete */
1294                 do
1295                 {
1296                         target_read_u32(target, FLASH_FMC, &flash_fmc);
1297                 }
1298                 while (flash_fmc & FMC_MERASE);
1299         }
1300
1301         return ERROR_OK;
1302 }
1303
1304 COMMAND_HANDLER(stellaris_handle_mass_erase_command)
1305 {
1306         int i;
1307
1308         if (CMD_ARGC < 1)
1309         {
1310                 command_print(CMD_CTX, "stellaris mass_erase <bank>");
1311                 return ERROR_OK;
1312         }
1313
1314         struct flash_bank *bank;
1315         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1316         if (ERROR_OK != retval)
1317                 return retval;
1318
1319         if (stellaris_mass_erase(bank) == ERROR_OK)
1320         {
1321                 /* set all sectors as erased */
1322                 for (i = 0; i < bank->num_sectors; i++)
1323                 {
1324                         bank->sectors[i].is_erased = 1;
1325                 }
1326
1327                 command_print(CMD_CTX, "stellaris mass erase complete");
1328         }
1329         else
1330         {
1331                 command_print(CMD_CTX, "stellaris mass erase failed");
1332         }
1333
1334         return ERROR_OK;
1335 }
1336
1337 /**
1338  * Perform the Stellaris "Recovering a 'Locked' Device procedure.
1339  * This performs a mass erase and then restores all nonvolatile registers
1340  * (including USER_* registers and flash lock bits) to their defaults.
1341  * Accordingly, flash can be reprogrammed, and JTAG can be used.
1342  *
1343  * NOTE that DustDevil parts (at least rev A0 silicon) have errata which
1344  * can affect this operation if flash protection has been enabled.
1345  */
1346 COMMAND_HANDLER(stellaris_handle_recover_command)
1347 {
1348         struct flash_bank *bank;
1349         int retval;
1350
1351         retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1352         if (retval != ERROR_OK)
1353                 return retval;
1354
1355         /* REVISIT ... it may be worth sanity checking that the AP is
1356          * inactive before we start.  ARM documents that switching a DP's
1357          * mode while it's active can cause fault modes that need a power
1358          * cycle to recover.
1359          */
1360
1361         /* assert SRST */
1362         if (!(jtag_get_reset_config() & RESET_HAS_SRST)) {
1363                 LOG_ERROR("Can't recover Stellaris flash without SRST");
1364                 return ERROR_FAIL;
1365         }
1366         jtag_add_reset(0, 1);
1367
1368         for (int i = 0; i < 5; i++) {
1369                 retval = dap_to_swd(bank->target);
1370                 if (retval != ERROR_OK)
1371                         goto done;
1372
1373                 retval = dap_to_jtag(bank->target);
1374                 if (retval != ERROR_OK)
1375                         goto done;
1376         }
1377
1378         /* de-assert SRST */
1379         jtag_add_reset(0, 0);
1380         retval = jtag_execute_queue();
1381
1382         /* wait 400+ msec ... OK, "1+ second" is simpler */
1383         usleep(1000);
1384
1385         /* USER INTERVENTION required for the power cycle
1386          * Restarting OpenOCD is likely needed because of mode switching.
1387          */
1388         LOG_INFO("USER ACTION:  "
1389                 "power cycle Stellaris chip, then restart OpenOCD.");
1390
1391 done:
1392         return retval;
1393 }
1394
1395 static const struct command_registration stellaris_exec_command_handlers[] = {
1396         {
1397                 .name = "mass_erase",
1398                 .handler = stellaris_handle_mass_erase_command,
1399                 .mode = COMMAND_EXEC,
1400                 .usage = "bank_id",
1401                 .help = "erase entire device",
1402         },
1403         {
1404                 .name = "recover",
1405                 .handler = stellaris_handle_recover_command,
1406                 .mode = COMMAND_EXEC,
1407                 .usage = "bank_id",
1408                 .help = "recover (and erase) locked device",
1409         },
1410         COMMAND_REGISTRATION_DONE
1411 };
1412 static const struct command_registration stellaris_command_handlers[] = {
1413         {
1414                 .name = "stellaris",
1415                 .mode = COMMAND_EXEC,
1416                 .help = "Stellaris flash command group",
1417                 .chain = stellaris_exec_command_handlers,
1418         },
1419         COMMAND_REGISTRATION_DONE
1420 };
1421
1422 struct flash_driver stellaris_flash = {
1423         .name = "stellaris",
1424         .commands = stellaris_command_handlers,
1425         .flash_bank_command = stellaris_flash_bank_command,
1426         .erase = stellaris_erase,
1427         .protect = stellaris_protect,
1428         .write = stellaris_write,
1429         .read = default_flash_read,
1430         .probe = stellaris_probe,
1431         .auto_probe = stellaris_probe,
1432         .erase_check = default_flash_mem_blank_check,
1433         .protect_check = stellaris_protect_check,
1434         .info = get_stellaris_info,
1435 };