git.gag.com Git - fw/cortex-toolchain/blob - summon-arm-toolchain

   1 #!/bin/bash
   2 # Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
   3 # Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
   4
   5 TARGET=arm-none-eabi            # Or: TARGET=arm-elf
   6 PREFIX=${HOME}/arm-none-eabi    # Install location of your final toolchain
   7 PARALLEL=""                     # Or: PARALLEL="-j 5" for 4 CPUs
   8 DARWIN_OPT_PATH=/opt/local      # Path in which MacPorts or Fink is installed
   9
  10 BINUTILS=binutils-2.19.1
  11 GCC=gcc-4.4.2
  12 NEWLIB=newlib-1.17.0
  13 GDB=gdb-7.1
  14 LIBCMSIS=v1.10-2
  15 LIBSTM32=v3.0.0-1
  16 LIBSTM32USB=v3.0.1-1
  17 LIBOPENSTM32=master
  18 LIBSTM32_EN=0
  19 LIBOPENSTM32_EN=0
  20
  21 SUMMON_DIR=$(pwd)
  22 SOURCES=${SUMMON_DIR}/sources
  23
  24 export PATH="${PREFIX}/bin:${PATH}"
  25
  26 GCCFLAGS=
  27 GDBFLAGS=
  28 BINUTILFLAGS=
  29
  30 case "$(uname)" in
  31         Linux)
  32         echo "Found Linux OS."
  33         ;;
  34         Darwin)
  35         echo "Found Darwin OS."
  36         GCCFLAGS="--with-gmp=${DARWIN_OPT_PATH} \
  37                   --with-mpfr=${DARWIN_OPT_PATH} \
  38                   -with-libiconv-prefix=${DARWIN_OPT_PATH}"
  39         ;;
  40         *)
  41         echo "Found unknown OS. Aborting!"
  42         exit 1
  43         ;;
  44 esac
  45
  46 if [ ! -e ${SOURCES} ]; then
  47     mkdir ${SOURCES}
  48 fi
  49
  50 cd ${SOURCES}
  51
  52 echo "Downloading binutils sources..."
  53 wget -c http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
  54
  55 echo "Downloading gcc sources..."
  56 wget -c http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.bz2
  57
  58 echo "Downloading newlib sources..."
  59 wget -c --no-passive-ftp ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
  60
  61 echo "Downloading gdb sources..."
  62 wget -c http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
  63
  64 if [ ${LIBSTM32_EN} != 0 ]; then
  65 if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
  66         echo "Cloning libcmsis sources..."
  67         git clone git://git.open-bldc.org/libcmsis.git
  68         cd libcmsis
  69         git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \
  70             bzip2 --stdout > ../libcmsis-${LIBCMSIS}.tar.bz2
  71         cd ..
  72         rm -rf libcmsis
  73 fi
  74
  75 if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
  76         echo "Cloning libstm32 sources..."
  77         git clone git://git.open-bldc.org/libstm32.git
  78         cd libstm32
  79         git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \
  80             bzip2 --stdout > ../libstm32-${LIBSTM32}.tar.bz2
  81         cd ..
  82         rm -rf libstm32
  83 fi
  84
  85 if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then
  86         echo "Cloning libstm32usb sources..."
  87         git clone git://git.open-bldc.org/libstm32usb.git
  88         cd libstm32usb
  89         git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \
  90             bzip2 --stdout > ../libstm32usb-${LIBSTM32USB}.tar.bz2
  91         cd ..
  92         rm -rf libstm32usb
  93 fi
  94 fi
  95
  96 if [ ${LIBOPENSTM32_EN} != 0 ]; then
  97 if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
  98         echo "Cloning libopenstm32 sources..."
  99         git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
 100         cd libopenstm32
 101         git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
 102             bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2
 103         cd ..
 104         rm -rf libopenstm32
 105 fi
 106 fi
 107
 108 cd ${SUMMON_DIR}
 109
 110 if [ ! -e build ]; then
 111     mkdir build
 112 fi
 113
 114 if [ ! -e .${BINUTILS}.build ]; then
 115     echo "******************************************************************"
 116     echo "* Unpacking ${BINUTILS}"
 117     echo "******************************************************************"
 118     tar xfvj ${SOURCES}/${BINUTILS}.tar.bz2
 119     cd build
 120     echo "******************************************************************"
 121     echo "* Configuring ${BINUTILS}"
 122     echo "******************************************************************"
 123     ../${BINUTILS}/configure --target=${TARGET} \
 124                            --prefix=${PREFIX} \
 125                            --enable-interwork \
 126                            --enable-multilib \
 127                            --with-gnu-as \
 128                            --with-gnu-ld \
 129                            --disable-nls \
 130                            --disable-werror \
 131                            ${BINUTILFLAGS} || exit
 132     echo "******************************************************************"
 133     echo "* Building ${BINUTILS}"
 134     echo "******************************************************************"
 135     make ${PARALLEL} || exit
 136     echo "******************************************************************"
 137     echo "* Installing ${BINUTILS}"
 138     echo "******************************************************************"
 139     make install || exit
 140     cd ..
 141     echo "******************************************************************"
 142     echo "* Cleaning up ${BINUTILS}"
 143     echo "******************************************************************"
 144     touch .${BINUTILS}.build
 145     rm -rf build/* ${BINUTILS}
 146 fi
 147
 148 if [ ! -e .${GCC}-boot.build ]; then
 149     echo "******************************************************************"
 150     echo "* Unpacking ${GCC}-boot"
 151     echo "******************************************************************"
 152     tar xfvj ${SOURCES}/${GCC}.tar.bz2
 153     cd build
 154     echo "******************************************************************"
 155     echo "* Configuring ${GCC}-boot"
 156     echo "******************************************************************"
 157     ../${GCC}/configure --target=${TARGET} \
 158                       --prefix=${PREFIX} \
 159                       --enable-interwork \
 160                       --enable-multilib \
 161                       --enable-languages="c" \
 162                       --with-newlib \
 163                       --without-headers \
 164                       --disable-shared \
 165                       --with-gnu-as \
 166                       --with-gnu-ld \
 167                       --disable-nls \
 168                       --disable-werror \
 169                       ${GCCFLAGS} || exit
 170     echo "******************************************************************"
 171     echo "* Building ${GCC}-boot"
 172     echo "******************************************************************"
 173     make ${PARALLEL} all-gcc || exit
 174     echo "******************************************************************"
 175     echo "* Installing ${GCC}-boot"
 176     echo "******************************************************************"
 177     make install-gcc || exit
 178     cd ..
 179     echo "******************************************************************"
 180     echo "* Cleaning up ${GCC}-boot"
 181     echo "******************************************************************"
 182     touch .${GCC}-boot.build
 183     rm -rf build/* ${GCC}
 184 fi
 185
 186 if [ ! -e .${NEWLIB}.build ]; then
 187     echo "******************************************************************"
 188     echo "* Unpacking ${NEWLIB}"
 189     echo "******************************************************************"
 190     tar xfvz ${SOURCES}/${NEWLIB}.tar.gz
 191     cd build
 192     echo "******************************************************************"
 193     echo "* Configuring ${NEWLIB}"
 194     echo "******************************************************************"
 195     ../${NEWLIB}/configure --target=${TARGET} \
 196                          --prefix=${PREFIX} \
 197                          --enable-interwork \
 198                          --enable-multilib \
 199                          --with-gnu-as \
 200                          --with-gnu-ld \
 201                          --disable-nls \
 202                          --disable-werror \
 203                          --disable-newlib-supplied-syscalls || exit
 204     echo "******************************************************************"
 205     echo "* Building ${NEWLIB}"
 206     echo "******************************************************************"
 207     make ${PARALLEL} || exit
 208     echo "******************************************************************"
 209     echo "* Installing ${NEWLIB}"
 210     echo "******************************************************************"
 211     make install || exit
 212     cd ..
 213     echo "******************************************************************"
 214     echo "* Cleaning up ${NEWLIB}"
 215     echo "******************************************************************"
 216     touch .${NEWLIB}.build
 217     rm -rf build/* ${NEWLIB}
 218 fi
 219
 220 # Yes, you need to build gcc again!
 221 if [ ! -e .${GCC}.build ]; then
 222     echo "******************************************************************"
 223     echo "* Unpacking ${GCC}"
 224     echo "******************************************************************"
 225     tar xfvj ${SOURCES}/${GCC}.tar.bz2
 226     cd build
 227     echo "******************************************************************"
 228     echo "* Configuring ${GCC}"
 229     echo "******************************************************************"
 230     ../${GCC}/configure --target=${TARGET} \
 231                       --prefix=${PREFIX} \
 232                       --enable-interwork \
 233                       --enable-multilib \
 234                       --enable-languages="c,c++" \
 235                       --with-newlib \
 236                       --disable-shared \
 237                       --with-gnu-as \
 238                       --with-gnu-ld \
 239                       --disable-nls \
 240                       --disable-werror \
 241                      ${GCCFLAGS} || exit
 242     echo "******************************************************************"
 243     echo "* Building ${GCC}"
 244     echo "******************************************************************"
 245     make ${PARALLEL} || exit
 246     echo "******************************************************************"
 247     echo "* Installing ${GCC}"
 248     echo "******************************************************************"
 249     make install || exit
 250     cd ..
 251     echo "******************************************************************"
 252     echo "* Cleaning up ${GCC}"
 253     echo "******************************************************************"
 254     touch .${GCC}.build
 255     rm -rf build/* ${GCC}
 256 fi
 257
 258 if [ ! -e .${GDB}.build ]; then
 259     echo "******************************************************************"
 260     echo "* Unpacking ${GDB}"
 261     echo "******************************************************************"
 262     tar xfvj ${SOURCES}/${GDB}.tar.bz2
 263     cd build
 264     echo "******************************************************************"
 265     echo "* Configuring ${GDB}"
 266     echo "******************************************************************"
 267     ../${GDB}/configure --target=${TARGET} \
 268                       --prefix=${PREFIX} \
 269                       --enable-interwork \
 270                       --enable-multilib \
 271                       --disable-werror \
 272                       ${GDBFLAGS} || exit
 273     echo "******************************************************************"
 274     echo "* Building ${GDB}"
 275     echo "******************************************************************"
 276     make ${PARALLEL} || exit
 277     echo "******************************************************************"
 278     echo "* Installing ${GDB}"
 279     echo "******************************************************************"
 280     make install || exit
 281     cd ..
 282     echo "******************************************************************"
 283     echo "* Cleaning up ${GDB}"
 284     echo "******************************************************************"
 285     touch .${GDB}.build
 286     rm -rf build/* ${GDB}
 287 fi
 288
 289 if [ ${LIBSTM32_EN} != 0 ]; then
 290 if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
 291     echo "******************************************************************"
 292     echo "* Unpacking libcmsis-${LIBCMSIS}"
 293     echo "******************************************************************"
 294     tar xfvj ${SOURCES}/libcmsis-${LIBCMSIS}.tar.bz2
 295     cd libcmsis-${LIBCMSIS}
 296     echo "******************************************************************"
 297     echo "* Building libcmsis-${LIBCMSIS}"
 298     echo "******************************************************************"
 299     make arch_prefix=${TARGET} prefix=${PREFIX} || exit
 300     echo "******************************************************************"
 301     echo "* Installing libcmsis-${LIBCMSIS}"
 302     echo "******************************************************************"
 303     make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
 304     cd ..
 305     echo "******************************************************************"
 306     echo "* Cleaning up libcmsis-${LIBCMSIS}"
 307     echo "******************************************************************"
 308     touch .libcmsis-${LIBCMSIS}.build
 309     rm -rf libcmsis-${LIBCMSIS}
 310 fi
 311
 312 if [ ! -e .libstm32-${LIBSTM32}.build ]; then
 313     echo "******************************************************************"
 314     echo "* Unpacking libstm32-${LIBSTM32}"
 315     echo "******************************************************************"
 316     tar xfvj ${SOURCES}/libstm32-${LIBSTM32}.tar.bz2
 317     cd libstm32-${LIBSTM32}
 318     echo "******************************************************************"
 319     echo "* Building libstm32-${LIBSTM32}"
 320     echo "******************************************************************"
 321     make arch_prefix=${TARGET} prefix=${PREFIX} || exit
 322     echo "******************************************************************"
 323     echo "* Installing libstm32-${LIBSTM32}"
 324     echo "******************************************************************"
 325     make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
 326     cd ..
 327     echo "******************************************************************"
 328     echo "* Cleaning up libstm32-${LIBSTM32}"
 329     echo "******************************************************************"
 330     touch .libstm32-${LIBSTM32}.build
 331     rm -rf libstm32-${LIBSTM32}
 332 fi
 333
 334 if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
 335     echo "******************************************************************"
 336     echo "* Unpacking libstm32usb-${LIBSTM32USB}"
 337     echo "******************************************************************"
 338     tar xfvj ${SOURCES}/libstm32usb-${LIBSTM32USB}.tar.bz2
 339     cd libstm32usb-${LIBSTM32USB}
 340     echo "******************************************************************"
 341     echo "* Building libstm32usb-${LIBSTM32USB}"
 342     echo "******************************************************************"
 343     make arch_prefix=${TARGET} prefix=${PREFIX} || exit
 344     echo "******************************************************************"
 345     echo "* Installing libstm32usb-${LIBSTM32USB}"
 346     echo "******************************************************************"
 347     make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
 348     cd ..
 349     echo "******************************************************************"
 350     echo "* Cleaning up libstm32usb-${LIBSTM32USB}"
 351     echo "******************************************************************"
 352     touch .libstm32usb-${LIBSTM32USB}.build
 353     rm -rf libstm32usb-${LIBSTM32USB}
 354 fi
 355 fi
 356
 357 if [ $LIBOPENSTM32_EN != 0 ]; then
 358     echo "******************************************************************"
 359     echo "* Unpacking libopenstm32-${LIBOPENSTM32}"
 360     echo "******************************************************************"
 361     tar xfvj ${SOURCES}/libopenstm32-${LIBOPENSTM32}.tar.bz2
 362     cd libopenstm32-${LIBOPENSTM32}
 363     echo "******************************************************************"
 364     echo "* Building libopenstm32-${LIBOPENSTM32}"
 365     echo "******************************************************************"
 366     make PREFIX=${TARGET} DESTDIR=${PREFIX} || exit
 367     echo "******************************************************************"
 368     echo "* Installing libopenstm32-${LIBOPENSTM32}"
 369     echo "******************************************************************"
 370     make PREFIX=${TARGET} DESTDIR=${PREFIX} install || exit
 371     cd ..
 372     echo "******************************************************************"
 373     echo "* Cleaning up libopenstm32-${LIBOPENSTM32}"
 374     echo "******************************************************************"
 375     touch .libopenstm32-${LIBOPENSTM32}.build
 376     rm -rf libopenstm32-${LIBOPENSTM32}
 377 fi