altos/telemega-v1.0: Adjust config params to make flight erase work

[fw/altos] / src / telemega-v1.0 / ao_pins.h

diff --git a/src/telemega-v1.0/ao_pins.h b/src/telemega-v1.0/ao_pins.h
index 95644dae03a1611b9e00197a980fa48e2af82f65..77b753d1edb3083cf56c6d917f30154438da864f 100644 (file)
--- a/src/telemega-v1.0/ao_pins.h
+++ b/src/telemega-v1.0/ao_pins.h
@@ -65,12 +65,17 @@
 #define ao_gps_fifo            (ao_stm_usart3.rx_fifo)
 
 #define AO_CONFIG_DEFAULT_FLIGHT_LOG_MAX       (1024 * 1024)
+#define AO_CONFIG_MAX_SIZE                     1024
+#define LOG_ERASE_MARK                         0x55
+#define LOG_MAX_ERASE                          128
+
 #define HAS_EEPROM             1
 #define USE_INTERNAL_FLASH     0
 #define USE_EEPROM_CONFIG      1
 #define USE_STORAGE_CONFIG     0
 #define HAS_USB                        1
 #define HAS_BEEP               1
+#define HAS_BATTERY_REPORT     1
 #define HAS_RADIO              1
 #define HAS_TELEMETRY          1
 #define HAS_APRS               1
@@ -249,6 +254,23 @@ struct ao_adc {
 #define AO_ADC_SQ8             AO_ADC_V_PBATT
 #define AO_ADC_SQ9             AO_ADC_TEMP
 
+/*
+ * Voltage divider on ADC battery sampler
+ */
+#define AO_BATTERY_DIV_PLUS    56      /* 5.6k */
+#define AO_BATTERY_DIV_MINUS   100     /* 10k */
+
+/*
+ * Voltage divider on ADC igniter samplers
+ */
+#define AO_IGNITE_DIV_PLUS     100     /* 100k */
+#define AO_IGNITE_DIV_MINUS    27      /* 27k */
+
+/*
+ * ADC reference in decivolts
+ */
+#define AO_ADC_REFERENCE_DV    33
+
 /*
  * Pressure sensor settings
  */