--- /dev/null
+/*
+ * Copyright © 2012 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+/* 8MHz High speed external crystal */
+#define AO_HSE 8000000
+
+/* PLLVCO = 96MHz (so that USB will work) */
+#define AO_PLLMUL 12
+#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
+
+/* SYSCLK = 32MHz (no need to go faster than CPU) */
+#define AO_PLLDIV 3
+#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
+
+/* HCLK = 32MHz (CPU clock) */
+#define AO_AHB_PRESCALER 1
+#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
+
+/* Run APB1 at 16MHz (HCLK/2) */
+#define AO_APB1_PRESCALER 2
+#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
+
+/* Run APB2 at 16MHz (HCLK/2) */
+#define AO_APB2_PRESCALER 2
+#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
+
+#define HAS_EEPROM 1
+#define USE_INTERNAL_FLASH 1
+#define HAS_USB 1
+#define HAS_BEEP 1
+#define HAS_RADIO 1
+#define HAS_TELEMETRY 0
+#define HAS_AES 1
+
+#define HAS_SPI_1 1
+#define SPI_1_PA5_PA6_PA7 1
+#define SPI_1_PB3_PB4_PB5 0
+#define SPI_1_PE13_PE14_PE15 0
+
+#define HAS_SPI_2 1
+#define SPI_2_PB13_PB14_PB15 1
+#define SPI_2_PD1_PD3_PD4 0
+#define SPI_2_GPIO (&stm_gpiob)
+#define SPI_2_SCK 13
+#define SPI_2_MISO 14
+#define SPI_2_MOSI 15
+
+#define HAS_I2C_1 0
+
+#define HAS_I2C_2 0
+
+#define PACKET_HAS_SLAVE 0
+#define PACKET_HAS_MASTER 0
+
+/*
+ * Radio is a cc1111 connected via SPI
+ */
+#define AO_RADIO_CAL_DEFAULT 1186611
+
+#define AO_RADIO_SPI_BUS AO_SPI_2_PB13_PB14_PB15
+#define AO_RADIO_CS_PORT (&stm_gpiob)
+#define AO_RADIO_CS_PIN 12
+
+#define AO_RADIO_INT_PORT (&stm_gpioc)
+#define AO_RADIO_INT_PIN 14
+
+#define LOW_LEVEL_DEBUG 0
+
+#define LED_PORT_ENABLE STM_RCC_AHBENR_GPIOCEN
+#define LED_PORT (&stm_gpioc)
+#define LED_PIN_RED 7
+#define LED_PIN_GREEN 8
+#define LED_PIN_CONTINUITY_3 9
+#define LED_PIN_CONTINUITY_2 10
+#define LED_PIN_CONTINUITY_1 11
+#define LED_PIN_CONTINUITY_0 12
+#define LED_PIN_REMOTE_ARM 13
+#define AO_LED_RED (1 << LED_PIN_RED)
+#define AO_LED_GREEN (1 << LED_PIN_GREEN)
+#define AO_LED_CONTINUITY_3 (1 << LED_PIN_CONTINUITY_3)
+#define AO_LED_CONTINUITY_2 (1 << LED_PIN_CONTINUITY_2)
+#define AO_LED_CONTINUITY_1 (1 << LED_PIN_CONTINUITY_1)
+#define AO_LED_CONTINUITY_0 (1 << LED_PIN_CONTINUITY_0)
+
+#define AO_LED_CONTINUITY_NUM 4
+
+#define AO_LED_REMOTE_ARM (1 << LED_PIN_REMOTE_ARM)
+
+#define LEDS_AVAILABLE (AO_LED_RED | \
+ AO_LED_GREEN | \
+ AO_LED_CONTINUITY_3 | \
+ AO_LED_CONTINUITY_2 | \
+ AO_LED_CONTINUITY_1 | \
+ AO_LED_CONTINUITY_0 | \
+ AO_LED_REMOTE_ARM)
+
+/* LCD displays */
+
+#define AO_LCD_STM_SEG_ENABLED_0 ( \
+ (1 << 0) | /* PA1 */ \
+ (1 << 1) | /* PA2 */ \
+ (1 << 2) | /* PA3 */ \
+ (1 << 3) | /* PA6 */ \
+ (1 << 4) | /* PA7 */ \
+ (1 << 5) | /* PB0 */ \
+ (1 << 6) | /* PB1 */ \
+ (1 << 7) | /* PB3 */ \
+ (0 << 8) | /* PB4 */ \
+ (0 << 9) | /* PB5 */ \
+ (0 << 10) | /* PB10 */ \
+ (0 << 11) | /* PB11 */ \
+ (0 << 12) | /* PB12 */ \
+ (0 << 13) | /* PB13 */ \
+ (0 << 14) | /* PB14 */ \
+ (0 << 15) | /* PB15 */ \
+ (0 << 16) | /* PB8 */ \
+ (0 << 17) | /* PA15 */ \
+ (0 << 18) | /* PC0 */ \
+ (0 << 19) | /* PC1 */ \
+ (0 << 20) | /* PC2 */ \
+ (0 << 21) | /* PC3 */ \
+ (0 << 22) | /* PC4 */ \
+ (0 << 23) | /* PC5 */ \
+ (0 << 24) | /* PC6 */ \
+ (0 << 25) | /* PC7 */ \
+ (0 << 26) | /* PC8 */ \
+ (0 << 27) | /* PC9 */ \
+ (0 << 28) | /* PC10 or PD8 */ \
+ (0 << 29) | /* PC11 or PD9 */ \
+ (0 << 30) | /* PC12 or PD10 */ \
+ (0 << 31)) /* PD2 or PD11 */
+
+#define AO_LCD_STM_SEG_ENABLED_1 ( \
+ (0 << 0) | /* PD12 */ \
+ (0 << 1) | /* PD13 */ \
+ (0 << 2) | /* PD14 */ \
+ (0 << 3) | /* PD15 */ \
+ (0 << 4) | /* PE0 */ \
+ (0 << 5) | /* PE1 */ \
+ (0 << 6) | /* PE2 */ \
+ (0 << 7)) /* PE3 */
+
+#define AO_LCD_STM_COM_ENABLED ( \
+ (1 << 0) | /* PA8 */ \
+ (1 << 1) | /* PA9 */ \
+ (1 << 2) | /* PA10 */ \
+ (0 << 3) | /* PB9 */ \
+ (0 << 4) | /* PC10 */ \
+ (0 << 5) | /* PC11 */ \
+ (0 << 6)) /* PC12 */
+
+#define AO_LCD_28_ON_C 0
+
+#define AO_LCD_DUTY STM_LCD_CR_DUTY_1_4
+
+#define AO_SEGMENT_0 0
+#define AO_SEGMENT_1 5
+#define AO_SEGMENT_2 1
+#define AO_SEGMENT_3 6
+#define AO_SEGMENT_4 4
+#define AO_SEGMENT_5 2
+#define AO_SEGMENT_6 3
+#define AO_SEGMENT_7 7
+
+/*
+ * Use event queue for input devices
+ */
+
+#define AO_EVENT 1
+
+/*
+ * Knobs
+ */
+
+#define AO_QUADRATURE_COUNT 2
+#define AO_QUADRATURE_MODE 0
+
+#define AO_QUADRATURE_0_PORT &stm_gpioc
+#define AO_QUADRATURE_0_A 3
+#define AO_QUADRATURE_0_B 2
+
+#define AO_QUADRATURE_PAD 0
+
+#define AO_QUADRATURE_1_PORT &stm_gpioc
+#define AO_QUADRATURE_1_A 1
+#define AO_QUADRATURE_1_B 0
+
+#define AO_QUADRATURE_BOX 1
+
+/*
+ * Buttons
+ */
+
+#define AO_BUTTON_COUNT 2
+#define AO_BUTTON_MODE AO_EXTI_MODE_PULL_UP
+
+#define AO_BUTTON_0_PORT &stm_gpioc
+#define AO_BUTTON_0 4
+
+#define AO_BUTTON_ARM 0
+
+#define AO_BUTTON_1_PORT &stm_gpioc
+#define AO_BUTTON_1 5
+
+#define AO_BUTTON_FIRE 1
+
+#endif /* _AO_PINS_H_ */
projects / fw / altos / blobdiff