altos: ADS124S0X driver compiles now

[fw/altos] / src / telegps-v0.1 / ao_pins.h

diff --git a/src/telegps-v0.1/ao_pins.h b/src/telegps-v0.1/ao_pins.h
index 77b2373dad70ce31a6f1fa9891ac4e2235ecde3e..5afc9498c7d22bcdd01d1032ba85e86a5cf602b1 100644 (file)
--- a/src/telegps-v0.1/ao_pins.h
+++ b/src/telegps-v0.1/ao_pins.h
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.

  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of


@@ -64,17 +65,28 @@
 #define ao_gps_set_speed       ao_serial2_set_speed
 #define ao_gps_fifo            (ao_stm_usart2.rx_fifo)
 
 #define ao_gps_set_speed       ao_serial2_set_speed
 #define ao_gps_fifo            (ao_stm_usart2.rx_fifo)
 

-#define HAS_EEPROM             0
+#define HAS_EEPROM             1

 #define USE_INTERNAL_FLASH     0
 #define USE_INTERNAL_FLASH     0

+#define USE_EEPROM_CONFIG      1
+#define USE_STORAGE_CONFIG     0
+

 #define HAS_USB                        1
 #define HAS_BEEP               0
 #define HAS_USB                        1
 #define HAS_BEEP               0

-#define HAS_RADIO              0
-#define HAS_TELEMETRY          0
+#define HAS_RADIO              1
+#define HAS_TELEMETRY          1
+#define HAS_APRS               1
+#define HAS_RADIO_RECV         0

 
 

-#define HAS_SPI_1              0
-#define SPI_1_PA5_PA6_PA7      0
+#define HAS_SPI_1              1
+#define SPI_1_PA5_PA6_PA7      1       /* SD card */

 #define SPI_1_PB3_PB4_PB5      0
 #define SPI_1_PE13_PE14_PE15   0
 #define SPI_1_PB3_PB4_PB5      0
 #define SPI_1_PE13_PE14_PE15   0

+#define SPI_1_OSPEEDR          STM_OSPEEDR_10MHz
+
+#define SPI_1_PORT             (&stm_gpioa)
+#define SPI_1_SCK_PIN          5
+#define SPI_1_MISO_PIN         6
+#define SPI_1_MOSI_PIN         7

 
 #define HAS_SPI_2              1
 #define SPI_2_PB13_PB14_PB15   1       /* CC115L */
 
 #define HAS_SPI_2              1
 #define SPI_2_PB13_PB14_PB15   1       /* CC115L */


@@ -108,7 +120,7 @@
 
 #define LEDS_AVAILABLE         (AO_LED_RED | AO_LED_GREEN)
 
 
 #define LEDS_AVAILABLE         (AO_LED_RED | AO_LED_GREEN)
 

-#define HAS_GPS                        0
+#define HAS_GPS                        1

 #define HAS_FLIGHT             0
 #define HAS_ADC                        0
 #define HAS_LOG                        0
 #define HAS_FLIGHT             0
 #define HAS_ADC                        0
 #define HAS_LOG                        0


@@ -122,37 +134,58 @@
 #define AO_MONITOR_LED         AO_LED_GREEN
 
 /*
 #define AO_MONITOR_LED         AO_LED_GREEN
 
 /*

- * Radio (cc115)
+ * Radio (cc115l)

  */
 
 /* gets pretty close to 434.550 */
 
  */
 
 /* gets pretty close to 434.550 */
 

-#define AO_RADIO_CAL_DEFAULT   0x6ca333
+#define AO_RADIO_CAL_DEFAULT   0x10b6a5
+
+#define HAS_RADIO_POWER                1

 
 #define AO_FEC_DEBUG           0
 
 #define AO_FEC_DEBUG           0

-#define AO_CC1120_SPI_CS_PORT  (&stm_gpioa)
-#define AO_CC1120_SPI_CS_PIN   0
-#define AO_CC1120_SPI_BUS      AO_SPI_2_PB13_PB14_PB15
-#define AO_CC1120_SPI          stm_spi2
+#define AO_CC115L_SPI_CS_PORT  (&stm_gpiob)
+#define AO_CC115L_SPI_CS_PIN   12
+#define AO_CC115L_SPI_BUS      AO_SPI_2_PB13_PB14_PB15
+#define AO_CC115L_SPI          stm_spi2
+#define AO_CC115L_SPI_SPEED    AO_SPI_SPEED_4MHz

 
 

-#define AO_CC1120_INT_PORT     (&stm_gpioc)
-#define AO_CC1120_INT_PIN      13
+#define AO_CC115L_FIFO_INT_GPIO_IOCFG  CC115L_IOCFG2
+#define AO_CC115L_FIFO_INT_PORT                (&stm_gpioa)
+#define AO_CC115L_FIFO_INT_PIN         (9)

 
 

-#define AO_CC1120_MCU_WAKEUP_PORT      (&stm_gpioc)
-#define AO_CC1120_MCU_WAKEUP_PIN       (0)
+#define AO_CC115L_DONE_INT_GPIO_IOCFG  CC115L_IOCFG0
+#define AO_CC115L_DONE_INT_PORT                (&stm_gpioa)
+#define AO_CC115L_DONE_INT_PIN         (10)

 
 

-#define AO_CC1120_INT_GPIO     2
-#define AO_CC1120_INT_GPIO_IOCFG       CC1120_IOCFG2
+#define HAS_RADIO_AMP          1
+
+/*
+ * Power amplifier (RFPA0133)
+ */

 
 

-#define AO_CC1120_MARC_GPIO    3
-#define AO_CC1120_MARC_GPIO_IOCFG      CC1120_IOCFG3
+#define AO_PA_POWER_GPIO       (&stm_gpiob)
+#define AO_PA_POWER_PIN                1
+#define AO_PA_GAIN_8_GPIO      (&stm_gpiob)
+#define AO_PA_GAIN_8_PIN       10
+#define AO_PA_GAIN_16_GPIO     (&stm_gpiob)
+#define AO_PA_GAIN_16_PIN      11

 
 /*
 
 /*

- * Profiling Viterbi decoding
+ * SD card

  */
 
  */
 

-#ifndef AO_PROFILE
-#define AO_PROFILE             0
-#endif
+#define AO_SDCARD_SPI_BUS      AO_SPI_1_PA5_PA6_PA7
+#define AO_SDCARD_SPI_PORT     SPI_1_PORT
+#define AO_SDCARD_SPI_SCK_PIN  SPI_1_SCK_PIN
+#define AO_SDCARD_SPI_MISO_PIN SPI_1_MISO_PIN
+#define AO_SDCARD_SPI_MOSI_PIN SPI_1_MOSI_PIN
+#define AO_SDCARD_SPI_CS_PORT  (&stm_gpioa)
+#define AO_SDCARD_SPI_CS_PIN   4
+#define AO_SDCARD_SPI          stm_spi1
+
+#define SDCARD_DEBUG           1
+#define SDCARD_WARN            1
+#define SDCARD_TRACE           1

 
 #endif /* _AO_PINS_H_ */
 
 #endif /* _AO_PINS_H_ */