altos: Hook up the FAT16 and SD card support to telegps

[fw/altos] / src / telegps-v0.1 / ao_pins.h

diff --git a/src/telegps-v0.1/ao_pins.h b/src/telegps-v0.1/ao_pins.h
index 77b2373dad70ce31a6f1fa9891ac4e2235ecde3e..01f4a303499b481abbf864870a1548696797e0ea 100644 (file)
--- a/src/telegps-v0.1/ao_pins.h
+++ b/src/telegps-v0.1/ao_pins.h
@@ -64,17 +64,20 @@
 #define ao_gps_set_speed       ao_serial2_set_speed
 #define ao_gps_fifo            (ao_stm_usart2.rx_fifo)
 
-#define HAS_EEPROM             0
-#define USE_INTERNAL_FLASH     0
+#define HAS_EEPROM             1
+#define USE_INTERNAL_FLASH     1
 #define HAS_USB                        1
 #define HAS_BEEP               0
-#define HAS_RADIO              0
-#define HAS_TELEMETRY          0
+#define HAS_RADIO              1
+#define HAS_TELEMETRY          1
+#define HAS_APRS               1
+#define HAS_RADIO_RECV         0
 
-#define HAS_SPI_1              0
-#define SPI_1_PA5_PA6_PA7      0
+#define HAS_SPI_1              1
+#define SPI_1_PA5_PA6_PA7      1       /* SD card */
 #define SPI_1_PB3_PB4_PB5      0
 #define SPI_1_PE13_PE14_PE15   0
+#define SPI_1_OSPEEDR          STM_OSPEEDR_10MHz
 
 #define HAS_SPI_2              1
 #define SPI_2_PB13_PB14_PB15   1       /* CC115L */
@@ -108,7 +111,7 @@
 
 #define LEDS_AVAILABLE         (AO_LED_RED | AO_LED_GREEN)
 
-#define HAS_GPS                        0
+#define HAS_GPS                        1
 #define HAS_FLIGHT             0
 #define HAS_ADC                        0
 #define HAS_LOG                        0
@@ -122,37 +125,51 @@
 #define AO_MONITOR_LED         AO_LED_GREEN
 
 /*
- * Radio (cc115)
+ * Radio (cc115l)
  */
 
 /* gets pretty close to 434.550 */
 
-#define AO_RADIO_CAL_DEFAULT   0x6ca333
+#define AO_RADIO_CAL_DEFAULT   0x10b6a5
 
 #define AO_FEC_DEBUG           0
-#define AO_CC1120_SPI_CS_PORT  (&stm_gpioa)
-#define AO_CC1120_SPI_CS_PIN   0
-#define AO_CC1120_SPI_BUS      AO_SPI_2_PB13_PB14_PB15
-#define AO_CC1120_SPI          stm_spi2
+#define AO_CC115L_SPI_CS_PORT  (&stm_gpiob)
+#define AO_CC115L_SPI_CS_PIN   12
+#define AO_CC115L_SPI_BUS      AO_SPI_2_PB13_PB14_PB15
+#define AO_CC115L_SPI          stm_spi2
 
-#define AO_CC1120_INT_PORT     (&stm_gpioc)
-#define AO_CC1120_INT_PIN      13
+#define AO_CC115L_INT_PORT     (&stm_gpioa)
+#define AO_CC115L_INT_PIN      (9)
 
-#define AO_CC1120_MCU_WAKEUP_PORT      (&stm_gpioc)
-#define AO_CC1120_MCU_WAKEUP_PIN       (0)
+#define AO_CC115L_MCU_WAKEUP_PORT      (&stm_gpioa)
+#define AO_CC115L_MCU_WAKEUP_PIN       (10)
 
-#define AO_CC1120_INT_GPIO     2
-#define AO_CC1120_INT_GPIO_IOCFG       CC1120_IOCFG2
+#define AO_CC115L_INT_GPIO     2
+#define AO_CC115L_INT_GPIO_IOCFG       CC115L_IOCFG2
 
-#define AO_CC1120_MARC_GPIO    3
-#define AO_CC1120_MARC_GPIO_IOCFG      CC1120_IOCFG3
+#define AO_CC115L_MARC_GPIO    0
+#define AO_CC115L_MARC_GPIO_IOCFG      CC115L_IOCFG0
+
+#define AO_RADIO_HAS_PA        1
+
+/*
+ * Power amplifier (RFPA0133)
+ */
+
+#define AO_PA_POWER_GPIO       (&stm_gpiob)
+#define AO_PA_POWER_PIN                1
+#define AO_PA_GAIN_8_GPIO      (&stm_gpiob)
+#define AO_PA_GAIN_8_PIN       10
+#define AO_PA_GAIN_16_GPIO     (&stm_gpiob)
+#define AO_PA_GAIN_16_PIN      11
 
 /*
- * Profiling Viterbi decoding
+ * SD card
  */
 
-#ifndef AO_PROFILE
-#define AO_PROFILE             0
-#endif
+#define AO_SDCARD_SPI_BUS      AO_SPI_1_PA5_PA6_PA7
+#define AO_SDCARD_SPI_CS_PORT  (&stm_gpioa)
+#define AO_SDCARD_SPI_CS_PIN   4
+#define AO_SDCARD_SPI          stm_spi1
 
 #endif /* _AO_PINS_H_ */