altos: Delete unused config bits for telefireeight-v2.0. Add Makefile

[fw/altos] / src / telefireeight-v2.0 / ao_pins.h

diff --git a/src/telefireeight-v2.0/ao_pins.h b/src/telefireeight-v2.0/ao_pins.h
index c15e06bf1e4adf70167cf06315b09443f443d1c9..046514b42e64204528c1bf297216e2b10e304191 100644 (file)
--- a/src/telefireeight-v2.0/ao_pins.h
+++ b/src/telefireeight-v2.0/ao_pins.h
@@ -1,5 +1,5 @@
 /*
- * Copyright © 2010 Keith Packard <keithp@keithp.com>
+ * Copyright © 2019 Keith Packard <keithp@keithp.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,10 +25,6 @@
 #define HAS_FLIGHT             0
 #define HAS_USB                        1
 #define HAS_BEEP               0
-#define BEEPER_TIMER           3
-#define BEEPER_CHANNEL         1
-#define BEEPER_PORT            (&stm_gpioc)
-#define BEEPER_PIN             6
 #define HAS_GPS                        0
 #define HAS_SERIAL_1           0
 #define HAS_ADC                        1
@@ -37,9 +33,6 @@
 #define HAS_LOG                        0
 #define HAS_PAD                        1
 #define USE_INTERNAL_FLASH     1
-#define IGNITE_ON_P0           0
-#define PACKET_HAS_MASTER      0
-#define PACKET_HAS_SLAVE       0
 #define AO_DATA_RING           32
 #define USE_EEPROM_CONFIG      1
 #define USE_STORAGE_CONFIG     0
@@ -75,9 +68,6 @@
 #define SPI_1_PB3_PB4_PB5      0
 #define SPI_1_PE13_PE14_PE15   1
 #define SPI_1_GPIO             (&stm_gpioe)
-#define SPI_1_SCK              13
-#define SPI_1_MISO             14
-#define SPI_1_MOSI             15
 #define SPI_1_OSPEEDR          STM_OSPEEDR_10MHz
 
 #define HAS_SPI_2              0
@@ -88,11 +78,6 @@
 
 #define HAS_I2C_2              0
 
-#define PACKET_HAS_SLAVE       0
-#define PACKET_HAS_MASTER      0
-
-#define FAST_TIMER_FREQ                10000   /* .1ms for debouncing */
-
 /*
  * Radio is a cc1200 connected via SPI
  */
@@ -139,7 +124,7 @@
 #define LED_8_PORT             (&stm_gpioe)
 #define LED_8_PIN              3
 
-#define LED_PIN_ARMED          8
+#define AO_LED_ARMED           AO_LED_8
 
 /* RF good/marginal/poor */
 #define LED_9_PORT             (&stm_gpioe)
@@ -149,7 +134,6 @@
 #define LED_11_PORT            (&stm_gpioe)
 #define LED_11_PIN             6
 
-#define AO_LED_ARMED           AO_LED_8
 #define AO_LED_GREEN           AO_LED_9
 #define AO_LED_AMBER           AO_LED_10
 #define AO_LED_RED             AO_LED_11