altos/telelco-v2.0: A bit fancier with the drag-mode LED show

[fw/altos] / src / stmf0 / stm32f0.h

diff --git a/src/stmf0/stm32f0.h b/src/stmf0/stm32f0.h
index e53a5dfde770b560d0978346f5c33474315647a1..968c1295cda4072e2c7cc0766dd8efeecadf07ca 100644 (file)
--- a/src/stmf0/stm32f0.h
+++ b/src/stmf0/stm32f0.h
@@ -282,8 +282,8 @@ struct stm_rcc {
 
 extern struct stm_rcc stm_rcc;
 
-/* Nominal high speed internal oscillator frequency is 16MHz */
-#define STM_HSI_FREQ           16000000
+/* Nominal high speed internal oscillator frequency is 8MHz */
+#define STM_HSI_FREQ           8000000
 
 #define STM_RCC_CR_PLLRDY      (25)
 #define STM_RCC_CR_PLLON       (24)
@@ -1890,6 +1890,7 @@ extern struct stm_usb stm_usb;
 #define STM_USB_EPR_CTR_RX     15
 #define  STM_USB_EPR_CTR_RX_WRITE_INVARIANT            1
 #define STM_USB_EPR_DTOG_RX    14
+#define STM_USB_EPR_SW_BUF_TX  14
 #define STM_USB_EPR_DTOG_RX_WRITE_INVARIANT            0
 #define STM_USB_EPR_STAT_RX    12
 #define  STM_USB_EPR_STAT_RX_DISABLED                  0
@@ -1906,11 +1907,14 @@ extern struct stm_usb stm_usb;
 #define  STM_USB_EPR_EP_TYPE_INTERRUPT                 3
 #define  STM_USB_EPR_EP_TYPE_MASK                      3
 #define STM_USB_EPR_EP_KIND    8
+#define  STM_USB_EPR_EP_KIND_SNGL_BUF                  0       /* Bulk */
 #define  STM_USB_EPR_EP_KIND_DBL_BUF                   1       /* Bulk */
+#define  STM_USB_EPR_EP_KIND_NO_STATUS_OUT             0       /* Control */
 #define  STM_USB_EPR_EP_KIND_STATUS_OUT                        1       /* Control */
 #define STM_USB_EPR_CTR_TX     7
 #define  STM_USB_CTR_TX_WRITE_INVARIANT                        1
 #define STM_USB_EPR_DTOG_TX    6
+#define STM_USB_EPR_SW_BUF_RX  6
 #define  STM_USB_EPR_DTOG_TX_WRITE_INVARIANT           0
 #define STM_USB_EPR_STAT_TX    4
 #define  STM_USB_EPR_STAT_TX_DISABLED                  0
@@ -1996,7 +2000,12 @@ union stm_usb_bdt {
 
 #define STM_USB_BDT_SIZE       8
 
+/* We'll use the first block of usb SRAM for the BDT */
 extern uint8_t stm_usb_sram[] __attribute__((aligned(4)));
+extern union stm_usb_bdt stm_usb_bdt[STM_USB_BDT_SIZE] __attribute__((aligned(4)));
+
+#define stm_usb_sram   ((uint8_t *) 0x40006000)
+#define stm_usb_bdt    ((union stm_usb_bdt *) 0x40006000)
 
 struct stm_exti {
        vuint32_t       imr;