/* PCLK is set to 48MHz (HCLK 48MHz, HPRE 1, PPRE 1) */
-#define AO_SPI_SPEED_24MHz STM_SPI_CR1_BR_PCLK_2
-#define AO_SPI_SPEED_12MHz STM_SPI_CR1_BR_PCLK_4
-#define AO_SPI_SPEED_6MHz STM_SPI_CR1_BR_PCLK_8
-#define AO_SPI_SPEED_3MHz STM_SPI_CR1_BR_PCLK_16
-#define AO_SPI_SPEED_1500kHz STM_SPI_CR1_BR_PCLK_32
-#define AO_SPI_SPEED_750kHz STM_SPI_CR1_BR_PCLK_64
-#define AO_SPI_SPEED_375kHz STM_SPI_CR1_BR_PCLK_128
-#define AO_SPI_SPEED_187500Hz STM_SPI_CR1_BR_PCLK_256
+#define _AO_SPI_SPEED_24MHz STM_SPI_CR1_BR_PCLK_2
+#define _AO_SPI_SPEED_12MHz STM_SPI_CR1_BR_PCLK_4
+#define _AO_SPI_SPEED_6MHz STM_SPI_CR1_BR_PCLK_8
+#define _AO_SPI_SPEED_3MHz STM_SPI_CR1_BR_PCLK_16
+#define _AO_SPI_SPEED_1500kHz STM_SPI_CR1_BR_PCLK_32
+#define _AO_SPI_SPEED_750kHz STM_SPI_CR1_BR_PCLK_64
+#define _AO_SPI_SPEED_375kHz STM_SPI_CR1_BR_PCLK_128
+#define _AO_SPI_SPEED_187500Hz STM_SPI_CR1_BR_PCLK_256
-#define AO_SPI_SPEED_FAST AO_SPI_SPEED_24MHz
-
-/* Companion bus wants something no faster than 200kHz */
-
-#define AO_SPI_SPEED_200kHz AO_SPI_SPEED_187500Hz
+static inline uint32_t
+ao_spi_speed(uint32_t hz)
+{
+ if (hz >=24000000) return _AO_SPI_SPEED_24MHz;
+ if (hz >=12000000) return _AO_SPI_SPEED_12MHz;
+ if (hz >= 6000000) return _AO_SPI_SPEED_6MHz;
+ if (hz >= 3000000) return _AO_SPI_SPEED_3MHz;
+ if (hz >= 1500000) return _AO_SPI_SPEED_1500kHz;
+ if (hz >= 750000) return _AO_SPI_SPEED_750kHz;
+ if (hz >= 375000) return _AO_SPI_SPEED_375kHz;
+ return _AO_SPI_SPEED_187500Hz;
+}
#define AO_SPI_CONFIG_1 0x00
#define AO_SPI_1_CONFIG_PA5_PA6_PA7 AO_SPI_CONFIG_1
#define AO_SPI_INDEX(id) ((id) & AO_SPI_INDEX_MASK)
#define AO_SPI_CONFIG(id) ((id) & AO_SPI_CONFIG_MASK)
+#define AO_SPI_PIN_CONFIG(id) ((id) & (AO_SPI_INDEX_MASK | AO_SPI_CONFIG_MASK))
+
+#define AO_SPI_CPOL_BIT 4
+#define AO_SPI_CPHA_BIT 5
+#define AO_SPI_CPOL(id) ((uint32_t) (((id) >> AO_SPI_CPOL_BIT) & 1))
+#define AO_SPI_CPHA(id) ((uint32_t) (((id) >> AO_SPI_CPHA_BIT) & 1))
+
+#define AO_SPI_MAKE_MODE(pol,pha) (((pol) << AO_SPI_CPOL_BIT) | ((pha) << AO_SPI_CPHA_BIT))
+#define AO_SPI_MODE_0 AO_SPI_MAKE_MODE(0,0)
+#define AO_SPI_MODE_1 AO_SPI_MAKE_MODE(0,1)
+#define AO_SPI_MODE_2 AO_SPI_MAKE_MODE(1,0)
+#define AO_SPI_MODE_3 AO_SPI_MAKE_MODE(1,1)
uint8_t
ao_spi_try_get(uint8_t spi_index, uint32_t speed, uint8_t task_id);
stm_spi->dr = 0xff;
while (!(stm_spi->sr & (1 << STM_SPI_SR_RXNE)))
;
- return stm_spi->dr;
+ return (uint8_t) stm_spi->dr;
}
void
void
ao_spi_duplex(void *out, void *in, uint16_t len, uint8_t spi_index);
-extern uint16_t ao_spi_speed[STM_NUM_SPI];
-
void
ao_spi_init(void);
ao_spi_put(bus); \
} while (0)
-#define ao_spi_get_bit(reg,bit,pin,bus,speed) ao_spi_get_mask(reg,(1<<bit),bus,speed)
-#define ao_spi_put_bit(reg,bit,pin,bus) ao_spi_put_mask(reg,(1<<bit),bus)
+#define ao_spi_get_bit(reg,bit,bus,speed) ao_spi_get_mask(reg,(1<<bit),bus,speed)
+#define ao_spi_put_bit(reg,bit,bus) ao_spi_put_mask(reg,(1<<bit),bus)
+#if AO_POWER_MANAGEMENT
extern struct ao_power ao_power_gpioa;
extern struct ao_power ao_power_gpiob;
extern struct ao_power ao_power_gpioc;
extern struct ao_power ao_power_gpiof;
+#endif
static inline void ao_enable_port(struct stm_gpio *port)
{
static inline void ao_disable_port(struct stm_gpio *port)
{
if ((port) == &stm_gpioa) {
- stm_rcc.ahbenr &= ~(1 << STM_RCC_AHBENR_IOPAEN);
+ stm_rcc.ahbenr &= ~(1UL << STM_RCC_AHBENR_IOPAEN);
ao_power_unregister(&ao_power_gpioa);
} else if ((port) == &stm_gpiob) {
- stm_rcc.ahbenr &= ~(1 << STM_RCC_AHBENR_IOPBEN);
+ stm_rcc.ahbenr &= ~(1UL << STM_RCC_AHBENR_IOPBEN);
ao_power_unregister(&ao_power_gpiob);
} else if ((port) == &stm_gpioc) {
- stm_rcc.ahbenr &= ~(1 << STM_RCC_AHBENR_IOPCEN);
+ stm_rcc.ahbenr &= ~(1UL << STM_RCC_AHBENR_IOPCEN);
ao_power_unregister(&ao_power_gpioc);
} else if ((port) == &stm_gpiof) {
- stm_rcc.ahbenr &= ~(1 << STM_RCC_AHBENR_IOPFEN);
+ stm_rcc.ahbenr &= ~(1UL << STM_RCC_AHBENR_IOPFEN);
ao_power_unregister(&ao_power_gpiof);
}
}
-#define ao_gpio_set(port, bit, pin, v) stm_gpio_set(port, bit, v)
+#define ao_gpio_set(port, bit, v) stm_gpio_set(port, bit, v)
-#define ao_gpio_get(port, bit, pin) stm_gpio_get(port, bit)
+#define ao_gpio_get(port, bit) stm_gpio_get(port, bit)
-#define ao_enable_output(port,bit,pin,v) do { \
+#define ao_enable_output(port,bit,v) do { \
ao_enable_port(port); \
- ao_gpio_set(port, bit, pin, v); \
+ ao_gpio_set(port, bit, v); \
stm_moder_set(port, bit, STM_MODER_OUTPUT);\
} while (0)
} while (0)
#define ao_enable_cs(port,bit) do { \
- ao_enable_output(port, bit, pin, 1); \
+ ao_enable_output(port, bit, 1); \
} while (0)
#define ao_spi_init_cs(port, mask) do { \
}
static inline void
-ao_arch_memory_barrier() {
+ao_arch_memory_barrier(void) {
asm volatile("" ::: "memory");
}
#if HAS_TASK
static inline void
-ao_arch_init_stack(struct ao_task *task, void *start)
+ao_arch_init_stack(struct ao_task *task, uint32_t *sp, void *start)
{
- uint32_t *sp = (uint32_t *) ((void *) task->stack + AO_STACK_SIZE);
uint32_t a = (uint32_t) start;
int i;
/* PRIMASK with interrupts enabled */
ARM_PUSH32(sp, 0);
- task->sp = sp;
+ task->sp32 = sp;
}
static inline void ao_arch_save_regs(void) {
static inline void ao_arch_save_stack(void) {
uint32_t *sp;
asm("mov %0,sp" : "=&r" (sp) );
- ao_cur_task->sp = (sp);
- if ((uint8_t *) sp < &ao_cur_task->stack[0])
+ ao_cur_task->sp32 = (sp);
+ if (sp < &ao_cur_task->stack32[0])
ao_panic (AO_PANIC_STACK);
}
static inline void ao_arch_restore_stack(void) {
- uint32_t sp;
- sp = (uint32_t) ao_cur_task->sp;
-
/* Switch stacks */
- asm("mov sp, %0" : : "r" (sp) );
+ asm("mov sp, %0" : : "r" (ao_cur_task->sp32) );
/* Restore PRIMASK */
asm("pop {r0}");
asm("pop {r0-r7,pc}\n");
}
+static inline void ao_sleep_mode(void) {
+
+ /*
+ WFI (Wait for Interrupt) or WFE (Wait for Event) while:
+ – Set SLEEPDEEP in Cortex ® -M0 System Control register
+ – Set PDDS bit in Power Control register (PWR_CR)
+ – Clear WUF bit in Power Control/Status register (PWR_CSR)
+ */
+
+ ao_arch_block_interrupts();
+
+ /* Enable power interface clock */
+ stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_PWREN);
+ ao_arch_nop();
+ stm_scb.scr |= (1 << STM_SCB_SCR_SLEEPDEEP);
+ ao_arch_nop();
+ stm_pwr.cr |= (1 << STM_PWR_CR_PDDS) | (1 << STM_PWR_CR_LPDS);
+ ao_arch_nop();
+ stm_pwr.cr |= (1 << STM_PWR_CR_CWUF);
+ ao_arch_nop();
+ ao_arch_nop();
+ ao_arch_nop();
+ ao_arch_nop();
+ ao_arch_nop();
+ asm("wfi");
+ ao_arch_nop();
+}
+
#ifndef HAS_SAMPLE_PROFILE
#define HAS_SAMPLE_PROFILE 0
#endif
/* ao_usb_stm.c */
#if AO_USB_DIRECTIO
-uint16_t *
-ao_usb_alloc(void);
+uint8_t
+ao_usb_alloc(uint16_t *buffers[2]);
-void
-ao_usb_write(uint16_t *buffer, uint16_t len);
+uint8_t
+ao_usb_alloc2(uint16_t *buffers[2]);
-void
-ao_usb_write2(uint16_t *buffer, uint16_t len);
+uint8_t
+ao_usb_write(uint16_t len);
+
+uint8_t
+ao_usb_write2(uint16_t len);
#endif /* AO_USB_DIRECTIO */
+void start(void);
+
+void
+ao_debug_out(char c);
+
#endif /* _AO_ARCH_FUNCS_H_ */
projects / fw / altos / blobdiff