Switch from GPLv2 to GPLv2+

[fw/altos] / src / stm / ao_timer.c

diff --git a/src/stm/ao_timer.c b/src/stm/ao_timer.c
index daf2f4000f3a7c3fc012064ac431e5edc1378fdd..f86a51169293e78a4fb930f8e132f19557c378e7 100644 (file)
--- a/src/stm/ao_timer.c
+++ b/src/stm/ao_timer.c
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -17,6 +18,9 @@
 
 #include "ao.h"
 #include <ao_task.h>
+#if HAS_FAKE_FLIGHT
+#include <ao_fake_flight.h>
+#endif
 
 #ifndef HAS_TICK
 #define HAS_TICK 1
@@ -38,6 +42,7 @@ volatile __data uint8_t       ao_data_count;
 
 void stm_systick_isr(void)
 {
+       ao_validate_cur_stack();
        if (stm_systick.csr & (1 << STM_SYSTICK_CSR_COUNTFLAG)) {
                ++ao_tick_count;
 #if HAS_TASK_QUEUE
@@ -47,11 +52,19 @@ void stm_systick_isr(void)
 #if AO_DATA_ALL
                if (++ao_data_count == ao_data_interval) {
                        ao_data_count = 0;
-                       ao_adc_poll();
+#if HAS_FAKE_FLIGHT
+                       if (ao_fake_flight_active)
+                               ao_fake_flight_poll();
+                       else
+#endif
+                               ao_adc_poll();
 #if (AO_DATA_ALL & ~(AO_DATA_ADC))
                        ao_wakeup((void *) &ao_data_count);
 #endif
                }
+#endif
+#ifdef AO_TIMER_HOOK
+               AO_TIMER_HOOK;
 #endif
        }
 }
@@ -67,20 +80,6 @@ ao_timer_set_adc_interval(uint8_t interval)
 }
 #endif
 
-/*
- * According to the STM clock-configuration, timers run
- * twice as fast as the APB1 clock *if* the APB1 prescaler
- * is greater than 1.
- */
-
-#if AO_APB1_PRESCALER > 1
-#define TIMER_23467_SCALER 2
-#else
-#define TIMER_23467_SCALER 1
-#endif
-
-#define TIMER_10kHz    ((AO_PCLK1 * TIMER_23467_SCALER) / 10000)
-
 #define SYSTICK_RELOAD (AO_SYSTICK / 100 - 1)
 
 void
@@ -104,7 +103,15 @@ ao_clock_init(void)
        /* Switch to MSI while messing about */
        stm_rcc.cr |= (1 << STM_RCC_CR_MSION);
        while (!(stm_rcc.cr & (1 << STM_RCC_CR_MSIRDY)))
-               asm("nop");
+               ao_arch_nop();
+
+       stm_rcc.cfgr = (stm_rcc.cfgr & ~(STM_RCC_CFGR_SW_MASK << STM_RCC_CFGR_SW)) |
+               (STM_RCC_CFGR_SW_MSI << STM_RCC_CFGR_SW);
+
+       /* wait for system to switch to MSI */
+       while ((stm_rcc.cfgr & (STM_RCC_CFGR_SWS_MASK << STM_RCC_CFGR_SWS)) !=
+              (STM_RCC_CFGR_SWS_MSI << STM_RCC_CFGR_SWS))
+               ao_arch_nop();
 
        /* reset SW, HPRE, PPRE1, PPRE2, MCOSEL and MCOPRE */
        stm_rcc.cfgr &= (uint32_t)0x88FFC00C;
@@ -155,7 +162,6 @@ ao_clock_init(void)
        stm_flash.acr |= (1 << STM_FLASH_ACR_PRFEN);
 
        /* Enable 1 wait state so the CPU can run at 32MHz */
-       /* (haven't managed to run the CPU at 32MHz yet, it's at 16MHz) */
        stm_flash.acr |= (1 << STM_FLASH_ACR_LATENCY);
 
        /* Enable power interface clock */