altos: Remove stdio from stm-flash

[fw/altos] / src / stm-flash / ao_pins.h

diff --git a/src/stm-flash/ao_pins.h b/src/stm-flash/ao_pins.h
index b232f373db699ba37bba2b62b0aa358319fbdd1a..d6c7265348e317856ff0f474bcaccec66a39e81d 100644 (file)
--- a/src/stm-flash/ao_pins.h
+++ b/src/stm-flash/ao_pins.h
@@ -20,7 +20,9 @@
 
 #define HAS_TASK_QUEUE         0
 
-#define AO_HSE                 8000000
+/* Bridge SB17 on the board and use the MCO from the other chip */
+#define AO_HSE         8000000
+#define AO_HSE_BYPASS          1
 
 /* PLLVCO = 96MHz (so that USB will work) */
 #define AO_PLLMUL              12
@@ -43,15 +45,18 @@
 #define AO_RCC_CFGR_PPRE2_DIV  STM_RCC_CFGR_PPRE2_DIV_1
 
 #define HAS_USB                        1
-#define USE_USB_STDIN          1
+#define USE_USB_STDIO          0
 #define HAS_BEEP               0
+#define HAS_TASK               0
+#define HAS_ECHO               0
+#define HAS_TICK               0
 
 #define PACKET_HAS_SLAVE       0
 
 #define LED_PORT_ENABLE                STM_RCC_AHBENR_GPIOCEN
-#define LED_PORT               (&stm_gpioc)
-#define LED_PIN_RED            8
-#define LED_PIN_GREEN          9
+#define LED_PORT               (&stm_gpiob)
+#define LED_PIN_RED            6
+#define LED_PIN_GREEN          7
 #define AO_LED_RED             (1 << LED_PIN_RED)
 #define AO_LED_GREEN           (1 << LED_PIN_GREEN)
 
@@ -61,11 +66,14 @@
 #define AO_TICK_SIGNED         int32_t
 
 #define HAS_TASK_INFO          0
+#define HAS_VERSION            0
 
-#define AO_BOOT_APPLICATION_GPIO       stm_gpiob
-#define AO_BOOT_APPLICATION_PIN                5
-#define AO_BOOT_APPLICATION_VALUE      0
+#define AO_BOOT_CHAIN          1
+#define AO_BOOT_PIN            1
+
+#define AO_BOOT_APPLICATION_GPIO       stm_gpiod
+#define AO_BOOT_APPLICATION_PIN                2
+#define AO_BOOT_APPLICATION_VALUE      1
 #define AO_BOOT_APPLICATION_MODE       AO_EXTI_MODE_PULL_UP
-#define AO_BOOT_APPLICATION_BASE       0x2000
 
 #endif /* _AO_PINS_H_ */