altos: Add µPusb v3.0 project

[fw/altos] / src / mpusb-v3.0 / ao_pins.h

diff --git a/src/mpusb-v3.0/ao_pins.h b/src/mpusb-v3.0/ao_pins.h
new file mode 100644 (file)
index 0000000..0c21186
--- /dev/null
+++ b/src/mpusb-v3.0/ao_pins.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright © 2012 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+/* Using TeleMetrum v1.9 board */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#define HAS_TASK_QUEUE         1
+
+#define IS_FLASH_LOADER        0
+
+#define AO_POWER_MANAGEMENT    1
+
+/* 48MHz clock based on USB */
+#define AO_HSI48       1
+
+/* HCLK = 48MHz */
+#define AO_AHB_PRESCALER       1
+#define AO_RCC_CFGR_HPRE_DIV   STM_RCC_CFGR_HPRE_DIV_1
+
+/* APB = 48MHz */
+#define AO_APB_PRESCALER       1
+#define AO_RCC_CFGR_PPRE_DIV   STM_RCC_CFGR_PPRE_DIV_1
+
+#define HAS_EEPROM             0
+#define USE_INTERNAL_FLASH     0
+#define USE_STORAGE_CONFIG     0
+#define USE_EEPROM_CONFIG      0
+
+#define HAS_BEEP               0
+
+#define HAS_USB                        1
+#define AO_USB_DIRECTIO                0
+#define AO_PA11_PA12_RMP       1
+
+#define HAS_SPI_0              0
+
+#define LOW_LEVEL_DEBUG                0
+
+#define HAS_SERIAL_2           1
+#define USE_SERIAL_2_STDIN     0
+#define SERIAL_2_PA2_PA3       1
+#define SERIAL_2_SWAP          0
+
+#define ao_up_getchar          ao_serial2_getchar
+#define ao_up_putchar          ao_serial2_putchar
+#define _ao_up_pollchar                _ao_serial2_pollchar
+#define ao_up_set_speed                ao_serial2_set_speed
+
+#endif /* _AO_PINS_H_ */