Move cortex toolchain to /opt/cortex
[fw/altos] / src / megametrum-v0.1 / ao_pins.h
index 724878b51c6bcfee669cfc7f9d8264f9e1a1a92c..4c645871fe758d6f6159da4aa49e38ef2823e936 100644 (file)
@@ -18,7 +18,7 @@
 #ifndef _AO_PINS_H_
 #define _AO_PINS_H_
 
-#define HAS_MS5611             1
+#define HAS_TASK_QUEUE         1
 
 /* 8MHz High speed external crystal */
 #define AO_HSE                 8000000
@@ -62,6 +62,7 @@
 #define ao_gps_getchar         ao_serial3_getchar
 #define ao_gps_putchar         ao_serial3_putchar
 #define ao_gps_set_speed       ao_serial3_set_speed
+#define ao_gps_fifo            (ao_stm_usart3.rx_fifo)
 
 #define HAS_EEPROM             1
 #define USE_INTERNAL_FLASH     0
 #define HAS_BEEP               1
 #define HAS_RADIO              1
 #define HAS_TELEMETRY          1
+#define HAS_APRS               1
 
 #define HAS_SPI_1              1
 #define SPI_1_PA5_PA6_PA7      1       /* Barometer */
 #define SPI_1_PB3_PB4_PB5      0
 #define SPI_1_PE13_PE14_PE15   1       /* Accelerometer */
+#define SPI_1_OSPEEDR          STM_OSPEEDR_10MHz
 
 #define HAS_SPI_2              1
 #define SPI_2_PB13_PB14_PB15   1       /* Flash, Companion */
 #define SPI_2_PD1_PD3_PD4      0
+#define SPI_2_OSPEEDR          STM_OSPEEDR_10MHz
 
 #define SPI_2_PORT             (&stm_gpiob)
 #define SPI_2_SCK_PIN          13
@@ -248,6 +252,7 @@ struct ao_adc {
  * Pressure sensor settings
  */
 #define HAS_MS5607             1
+#define HAS_MS5611             0
 #define AO_MS5607_PRIVATE_PINS 1
 #define AO_MS5607_CS_PORT      (&stm_gpioc)
 #define AO_MS5607_CS_PIN       4
@@ -278,12 +283,21 @@ struct ao_adc {
 #define AO_CC1120_SPI_CS_PORT  (&stm_gpioc)
 #define AO_CC1120_SPI_CS_PIN   5
 #define AO_CC1120_SPI_BUS      AO_SPI_2_PB13_PB14_PB15
+#define AO_CC1120_SPI          stm_spi2
 
-#define AO_CC1120_INT_PORT     (&stm_gpioc)
-#define AO_CC1120_INT_PIN      14
+#define AO_CC1120_INT_PORT             (&stm_gpioc)
+#define AO_CC1120_INT_PIN              14
+#define AO_CC1120_MCU_WAKEUP_PORT      (&stm_gpioc)
+#define AO_CC1120_MCU_WAKEUP_PIN       (0)
 
 #define AO_CC1120_INT_GPIO     2
-#define HAS_BOOT_RADIO         1
+#define AO_CC1120_INT_GPIO_IOCFG       CC1120_IOCFG2
+
+#define AO_CC1120_MARC_GPIO    3
+#define AO_CC1120_MARC_GPIO_IOCFG      CC1120_IOCFG3
+
+
+#define HAS_BOOT_RADIO         0
 
 /*
  * Mag sensor (hmc5883)