Switch from GPLv2 to GPLv2+

[fw/altos] / src / lpc / ao_timer_lpc.c

diff --git a/src/lpc/ao_timer_lpc.c b/src/lpc/ao_timer_lpc.c
index 62235d1e463026088ac11e4dd0b059752702acff..166e2f154aa135feab827b5bb3fde19a9ed14f31 100644 (file)
--- a/src/lpc/ao_timer_lpc.c
+++ b/src/lpc/ao_timer_lpc.c
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -99,19 +100,34 @@ ao_clock_init(void)
                                 (1 << LPC_SCB_SYSAHBCLKCTRL_FLASHARRAY) |
                                 (1 << LPC_SCB_SYSAHBCLKCTRL_GPIO) |
                                 (1 << LPC_SCB_SYSAHBCLKCTRL_IOCON));
-                                
+
+       /* Enable the brown-out detection at the highest voltage to
+        * make sure the flash part remains happy
+        */
+
+       lpc_scb.pdruncfg &= ~(1 << LPC_SCB_PDRUNCFG_BOD_PD);
+       lpc_scb.bodctrl = ((LPC_SCB_BOD_BODRSTLEV_2_63 << LPC_SCB_BOD_BODRSTLEV) |
+                          (LPC_SCB_BOD_BODINTVAL_RESERVED << LPC_SCB_BOD_BODINTVAL) |
+                          (1 << LPC_SCB_BOD_BODRSTENA));
+
        /* Turn the IRC clock back on */
        lpc_scb.pdruncfg &= ~(1 << LPC_SCB_PDRUNCFG_IRC_PD);
        ao_clock_delay();
-       
+
        /* Switch to the IRC clock */
        lpc_scb.mainclksel = LPC_SCB_MAINCLKSEL_SEL_IRC << LPC_SCB_MAINCLKSEL_SEL;
-       lpc_scb.mainclkuen = (1 << LPC_SCB_MAINCLKUEN_ENA);
        lpc_scb.mainclkuen = (0 << LPC_SCB_MAINCLKUEN_ENA);
        lpc_scb.mainclkuen = (1 << LPC_SCB_MAINCLKUEN_ENA);
        while (!(lpc_scb.mainclkuen & (1 << LPC_SCB_MAINCLKUEN_ENA)))
                ;
-       
+
+       /* Switch USB to the main clock */
+       lpc_scb.usbclksel = (LPC_SCB_USBCLKSEL_SEL_MAIN_CLOCK << LPC_SCB_USBCLKSEL_SEL);
+       lpc_scb.usbclkuen = (0 << LPC_SCB_USBCLKUEN_ENA);
+       lpc_scb.usbclkuen = (1 << LPC_SCB_USBCLKUEN_ENA);
+       while (!(lpc_scb.usbclkuen & (1 << LPC_SCB_USBCLKUEN_ENA)))
+               ;
+
        /* Find a PLL post divider ratio that gets the FCCO in range */
        for (p = 0; p < 4; p++)
                if (AO_LPC_CLKOUT << (1 + p) >= AO_LPC_FCCO_MIN)
@@ -148,12 +164,12 @@ ao_clock_init(void)
        lpc_scb.syspllclkuen = (1 << LPC_SCB_SYSPLLCLKUEN_ENA);
        while (!(lpc_scb.syspllclkuen & (1 << LPC_SCB_SYSPLLCLKUEN_ENA)))
                ;
-       
+
        /* Turn on the PLL */
        lpc_scb.pdruncfg &= ~(1 << LPC_SCB_PDRUNCFG_SYSPLL_PD);
 
        /* Wait for it to lock */
-       
+
        for (i = 0; i < 20000; i++)
                if (lpc_scb.syspllstat & (1 << LPC_SCB_SYSPLLSTAT_LOCK))
                        break;
@@ -178,16 +194,21 @@ ao_clock_init(void)
        lpc_scb.usbclkdiv = 0;
        lpc_scb.clkoutdiv = 0;
 
-#if 0
+       /* Switch USB PLL source to system osc so we can power down the IRC */
+       lpc_scb.usbpllclksel = (LPC_SCB_USBPLLCLKSEL_SEL_SYSOSC << LPC_SCB_USBPLLCLKSEL_SEL);
+       lpc_scb.usbpllclkuen = (0 << LPC_SCB_USBPLLCLKUEN_ENA);
+       lpc_scb.usbpllclkuen = (1 << LPC_SCB_USBPLLCLKUEN_ENA);
+       while (!(lpc_scb.usbpllclkuen & (1 << LPC_SCB_USBPLLCLKUEN_ENA)))
+               ;
+
        /* Power down everything we don't need */
        lpc_scb.pdruncfg = ((1 << LPC_SCB_PDRUNCFG_IRCOUT_PD) |
                            (1 << LPC_SCB_PDRUNCFG_IRC_PD) |
-                           (1 << LPC_SCB_PDRUNCFG_BOD_PD) |
+                           (0 << LPC_SCB_PDRUNCFG_BOD_PD) |
                            (1 << LPC_SCB_PDRUNCFG_ADC_PD) |
                            (1 << LPC_SCB_PDRUNCFG_WDTOSC_PD) |
                            (1 << LPC_SCB_PDRUNCFG_USBPLL_PD) |
                            (1 << LPC_SCB_PDRUNCFG_USBPAD_PD) |
                            (1 << 11) |
                            (7 << 13));
-#endif
 }