altos/lpc: Stop sending SETUP IN when the requested size is reached

[fw/altos] / src / lpc / ao_serial_lpc.c

diff --git a/src/lpc/ao_serial_lpc.c b/src/lpc/ao_serial_lpc.c
index b34de70498c948d6ec772aeb13da38b293660c5f..431ae98a784e61aca1ca09590a8b29b334b77957 100644 (file)
--- a/src/lpc/ao_serial_lpc.c
+++ b/src/lpc/ao_serial_lpc.c
@@ -71,7 +71,7 @@ lpc_usart_isr(void)
 }
 
 int
-_ao_serial_pollchar(void)
+_ao_serial0_pollchar(void)
 {
        int     c;
        
@@ -86,18 +86,18 @@ _ao_serial_pollchar(void)
 }
 
 char
-ao_serial_getchar(void)
+ao_serial0_getchar(void)
 {
        int c;
        ao_arch_block_interrupts();
-       while ((c = _ao_serial_pollchar()) == AO_READ_AGAIN)
+       while ((c = _ao_serial0_pollchar()) == AO_READ_AGAIN)
                ao_sleep(&ao_usart_rx_fifo);
        ao_arch_release_interrupts();
        return (char) c;
 }
 
 void
-ao_serial_putchar(char c)
+ao_serial0_putchar(char c)
 {
        ao_arch_block_interrupts();
        while (ao_fifo_full(ao_usart_tx_fifo))
@@ -108,7 +108,7 @@ ao_serial_putchar(char c)
 }
 
 void
-ao_serial_drain(void)
+ao_serial0_drain(void)
 {
        ao_arch_block_interrupts();
        while (!ao_fifo_empty(ao_usart_tx_fifo))
@@ -119,7 +119,7 @@ ao_serial_drain(void)
 #include "ao_serial_lpc.h"
 
 void
-ao_serial_set_speed(uint8_t speed)
+ao_serial0_set_speed(uint8_t speed)
 {
        if (speed > AO_SERIAL_SPEED_115200)
                return;
@@ -197,7 +197,7 @@ ao_serial_init(void)
        lpc_usart.hden = ((0 << LPC_USART_HDEN_HDEN));
 
        /* Set baud rate */
-       ao_serial_set_speed(AO_SERIAL_SPEED_9600);
+       ao_serial0_set_speed(AO_SERIAL_SPEED_9600);
 
        /* Enable interrupts */
        lpc_usart.ier = ((1 << LPC_USART_IER_RBRINTEN) |